Supplement for Administrator Guide KX-HDV130. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.

Transcription

1 Supplement for Administrator Guide Model o. SIP Phone KX-HDV130 Please use this supplement manual together with the latest English Administrator Guide. Document Version

2 1. Additional Information for Specifying the Server Address 1.1 Basic format Format: name> * The server name (<host>) may be the IP address or the domain. * Maximum length: 384 characters 1.2 Macros used with file names Macro Format {XXXX} Macro Expansion If the URL contains {MAC}, it will be replaced with the {MAC} device s MAC address in uppercase letters. Example: {MAC} 0080F0C571EB If the URL contains {mac}, it will be replaced with the {mac} device s MAC address in lowercase letters. Example: {mac} 0080f0c571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device s model name. Example: {MODEL} KX-HDV130 If the URL contains {fwver}, it will be replaced with the {fwver} device s firmware version. Example: {fwver} ote Macros distinguish between uppercase and lowercase letters. Macros not specified above will be treated as strings of characters. 1.3 Target WEB Settings/Configuration Parameters WEB Setting Configuration Parameter DHCP Host ame DHCP_HOST_AME Standard File URL CFG_STADARD_FILE_PATH Product File URL CFG_PRODUCT_FILE_PATH Master File URL CFG_MASTER_FILE_PATH - CFG_ROOT_CERTIFICATE_PATH - CFG_CLIET_CERT_PATH - CFG_PKE_PATH Firmware File URL FIRM_FILE_PATH HTTP User Agent HTTP_USER_AGET - XMPP_ROOT_CERT_PATH - XMPP_CLIET_CERT_PATH - XMPP_PKE_PATH - LDAP_ROOT_CERT_PATH - LDAP_CLIET_CERT_PATH - LDAP_PKE_PATH - LAGUAGE_PATHx - WEB_LAGUAGE_PATHx User Agent SIP_USER_AGET - SIP_TLS_ROOT_CERT_PATH - SIP_TLS_CLIET_CERT_PATH - SIP_TLS_PKE_PATH - POWER_O_DISPLA_LOGO_PATH 2. Additional Information for Specifying the LDAP Server Add "ldap://"or "ldaps://" before the LDAP server address. (Example) LDAP_SERVER="ldap:// "

3 KX HDV130 Software File Version or later VoIP Settings [Line 1] [Line 2] Change the followings in " SRTP Mode " on page 134. (Before) (After) SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. SRTP RTP/SRTP ote RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls XML Settings XML_SOFT_KE_AMEx STRIG x=1-3 Specifies the name of Soft Key A/B/C assigned to an XML application. Max. 5 characters XML XMLAPP_URL_SOFT_KEx STRIG x=1-3 Specifies the URL that is accessed when the Soft Key A/B/C is pressed. Max. 256 characters ("&" may also be used) Empty string XMLAPP_URL_FLEX_BUTTOx STRIG x=1-2 Specifies the URL that is accessed when the FFx key is pressed. Max. 256 characters ( "&" may also be used.) Empty string

4 XSI Settings XSI_PHOEBOOK_CCLIC_ITVL ITEGER Specifies the interval, in minutes, between periodic checks for updates of the Xsi Directory (Phonebook) files. If this parameter is set to "0", the timing is the same as updating the configuration files XSI_PHOEBOOK_RESC_DURATIO ITEGER Specifies the time range, in minutes, during which connected units can access the server. Xsi Directory (Phonebook) files will be downloaded at a random time within this range BSD_GROUP_EABLE_n Parameter ame Example BSD_GROUP_EABLE_1, BSD_GROUP_EABLE_2 Specifies whether to enable or disable the "Group" type for Xsi phonebooks. : Enable : Disable BSD_GROUPCOM_EABLE_n Parameter ame Example BSD_GROUPCOM_EABLE_1, BSD_GROUPCOM_EABLE_2 Specifies whether to enable or disable the "Group Common" type for Xsi phonebooks. : Enable : Disable BSD_ETERPRISE_EABLE_n Parameter ame Example BSD_ETERPRISE_EABLE_1, BSD_ETERPRISE_EABLE_2 Specifies whether to enable or disable the "Enterprise" type for Xsi phonebooks. : Enable : Disable

5 BSD_ETERPRISECOM_EABLE_n Parameter ame Example BSD_ETERPRISECOM_EABLE_1, BSD_ETERPRISECOM_EABLE_2 Specifies whether to enable or disable the "Enterprise Common" type for Xsi phonebooks. : Enable : Disable BSD_PERSOAL_EABLE_n Parameter ame Example BSD_PERSOAL_EABLE_1, BSD_PERSOAL_EABLE_2 Specifies whether to enable or disable the "Personal" type for Xsi phonebooks. : Enable : Disable SRTP Settings Change the followings in " SRTP_COECT_MODE_n " on page 270. (Before) 0: SRTP 1: RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. (After) 0: SRTP 1: RTP/SRTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.

6 Flexible Key Settings Change the followings in " FLEX_BUTTO_FACILIT_ACTx " on page 281. (Before) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_APPLICATIO Call Control Settings VM_SUBSCRIBE_SPECIFIC_n Parameter ame Example VM_SUBSCRIBE_SPECIFIC_1, VM_SUBSCRIBE_SPECIFIC_2 STRIG Specifies the defined name of a voice mail box. Max. 32 characters Empty string SHARED_STOP_LIE_SEIZE Specifies whether to stop seizing the Shared Call line at the unit side. : Stop seizing the line : Seize the line

7 KX HDV130 Software File Version or later Call Control Add the following WEB setting. Barge in Configuration File Reference Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) ot stored. UM_PLA_BARGE_I System Settings FWD_DD_MEU_EABLE Specifies whether the "Fwd/DD" setting is displayed in MEU. : Displayed : ot displayed BLOCK_AO_MEU_EABLE Specifies whether the "Block Anonymous" setting is displayed in MEU. : Displayed : ot displayed AO_CALL_MEU_EABLE Specifies whether the "Anonymous Call" setting is displayed in MEU. : Displayed : ot displayed TIME_ZOE_SET_EABLE Specifies whether the "Time Zone" setting is displayed in MEU. : Displayed : ot displayed

8 VM_FUCTIO_EABLE Specifies whether to enable the Voice Mail function. : Enable the Voice Mail function : Disable XSI Settings BSD_MULTI_TPE_EABLE Specifies whether you can select the type of Xsi phonebook. : Enable : Disable XMPP (UC-OE) Settings UC_USERID_CASE_SESITIVE Specifies whether the authentication ID is case-sensitive when accessing the UC server. : Enable : Disable AT Settings EXTERAL_RTP_PORTx ITEGER x=1-3 Specifies the port number of the router in Static AT status. 0, (only even ports) 0: Disable SIP Settings SIP_REPLACE_EABLE_n Parameter ame Example SIP_REPLACE_EABLE_1, SIP_REPLACE_EABLE_2 Specifies whether to use "Replaces Header". : Use "Replaces Header" : Do not use "Replaces Header"

9 SIP_IC_IVITE_RTP_MODE_n Parameter ame Example SIP_IC_IVITE_RTP_MODE_1, SIP_IC_IVITE_RTP_MODE_2 ITEGER Specifies whether to send RTP after receiving a second IVITE. 0: Start receiving RTP after receiving a second IVITE 1: Start sending/receiving RTP after receiving a second IVITE SIP-TLS Settings SIP_TLS_RADOM_PORT Specifies whether to assign a random port (ephemeral port) number or a static port number. ote All lines that use SIP-TLS are defined by this parameter. UDP/TCP ports are unaffected by this parameter. : Assign a random TLS port number : Assign a static TLS port number (Refer to SIP_SRC_PORT_n) VQ Report by PUBLISH VQREPORT_SED_OPT_CODEC_EABLE Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is changed. : Send VQREPORT when a change of codec is detected : Send VQREPORT at the end of a conversation VQREPORT_SED_OPT_W_CHAGE ITEGER Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG before the phone sends VQREPORT. The ALERT_REPORT_TRIGGER setting determines whether ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG is used as the threshold. 0 5 (The number of consecutive times. 0:Disable) ote If "2" is specified and the MOS value falls within the threshold 2 consecutive times, VQREPORT is sent. 0

10 Telephone Settings CIP_FROM_EABLE Specifies whether to use the 'FROM' header or the 'PAI' header in CIP(Calling umber Identification Presentation). : Use 'FROM' header : Use 'PAI' header IDLE_DISPLA_TPE ITEGER Specifies what is shown on the display in standby mode. 0: Off 1: Phone umber 2: Phone umber and ame 3: ame ote "ame" is the display name for the line. 3 UM_PLA_BARGE_I Web User Interface Reference STRIG Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) Empty string Barge in SOFT_KE_LABELx STRIG x=1-3 Specifies the text of the soft keys displayed on the screen for quick dialing. ote This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 5 characters SOFT_KE_LABEL1: 1 SOFT_KE_LABEL2: 2 SOFT_KE_LABEL3: 3

11 SOFT_KE_QUICK_DIALx STRIG x=1-3 Specifies quick-dial numbers to assign to the soft keys. ote This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 32 characters Empty string BLF_DISPLA_OFF_OUTGOIG Specifies whether to display the phone numbers of BLF keys or PAI after dialing. : Do not display : Display the numbers Call Control Settings FWD_SCHRO_FORCE_DISABLE_n Parameter ame Example FWD_SCHRO_FORCE_DISABLE_1, FWD_SCHRO_FORCE_DISABLE_2 Specifies whether to synchronize the Call Forward settings in FWD_DD_SCHRO_EABLE_n. : Do not synchronize : Synchronize COF_SERVER_HOLD_EABLE Specifies whether to hold the call when connecting an -party conference. : Hold the call : Do not hold the call

12 KX HDV130 Software File Version or later etwork Status Change the followings in " Setting Mode " on page 74. (Before) (After) Disable LLDP Manual Disable LLDP CDP LLDP/CDP Manual Ethernet Port Settings Add the following WEB setting. Enable CDP Configuration File Reference Selects whether to enable or disable the CDP feature. es o o CDP_EABLE Packet Interval Configuration File Reference Specifies the interval, in seconds, between sending CDP frames CDP_ITERVAL Call Control Add the following WEB setting. Group Call Pickup Configuration File Reference Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) ot stored. UM_PLA_PICKUP_GROUP Private Hold Configuration File Reference Selects whether to enable or disable private hold. es o o PRIVATE_HOLD_EABLE

13 Program Key (o. 1 2) Change the followings in " Type" on page 148. (Before) One Touch Dial BLF Line ACD Wrap Up Call Forward (After) One Touch Dial BLF Line ACD Wrap Up Call Forward Group Call Pickup System Settings AUTO_IPUT_KE_TIME ITEGER Specifies the number of seconds after which the cursor automatically moves to the next position during character input. 0 3 [0: off] 0 START_DIAL_POUD_KE Specifies whether to send the dialed number when the '#' key is pressed during pre-dialing. : Enable dialing by using '#' : Disable CALL_SETTIGS_MEU_EABLE Specifies whether the "Call Settings" setting is displayed in MEU. : Displayed : ot displayed

14 DISCLOSE_FUCTIO_EABLE Specifies whether to disclose functions and some keys for HOTEL telephones. : Enable to disclose : Disable DELA_RIG_TIME_n Parameter ame Example DELA_RIG_TIME_1, DELA_RIG_TIME_2 ITEGER Specifies the length of time, in seconds, until the unit rings : Disable 0 OFF_HOOK_MOITOR_EABLE Specifies whether to enable or disable the Off-hook Monitor function. : Enable Off-hook Monitor : Disable PRIVATE_HOLD_EABLE Web User Interface Reference Specifies whether to enable or disable private hold. : Enable private hold : Disable Private Hold COF_OWER_OUT_EABLE Specifies whether to allow the remaining two parties in a three-party conference to continue the conversation if the conference originator leaves the conference call (Unattended Conference). : Enable Unattended Conference : Disable PCAP_EABLE Specifies whether to enable or disable packet capturing using the Wireshark utility (PCAP Remote). : Enable PCAP Remote : Disable

15 PCAP_REMOTE_ID STRIG Specifies the ID of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote) characters Empty string PCAP_REMOTE_PASS STRIG Specifies the password of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote). 0, 6 64 characters Empty string PCAP_REMOTE_PORT ITEGER Specifies the port of the IP phone to use for capturing packets using the Wireshark utility (PCAP Remote) DTMF_OUT_EABLE Specifies whether received outband DTMF signals are output audibly. : Enable audible outband DTMF : Disable CACEL_OPERATIO_MODE ITEGER Specifies the operation of the [CACEL] button when a line is in use. 0: Cancel the current operation 1: Return to standby mode 0

16 Ethernet Port Settings CDP_EABLE Web User Interface Reference Specifies whether to enable or disable the CDP feature. : Enable CDP : Disable Enable CDP CDP_ITERVAL Web User Interface Reference ITEGER Specifies the interval, in seconds, between sending CDP frames Packet Interval TR-069 Settings TR069_REGISTERIG STRIG Specifies the line status that TR-069 outputs while the line is being registered. Max.16 characters Error TR069_REGISTERED STRIG Specifies the line status that TR-069 outputs when the line has been registered. Max.16 characters Registering

17 XML Settings XML_PHOEBOOK_URL STRIG Specifies the URL to download the XML phonebook file from. Max.256 characters Empty string XML_PHOEBOOK_CCLIC_ITVL ITEGER Specifies the interval, in minutes, between periodic checks for updates to the XML phonebook. If this parameter is set to "0", the timing is the same as that for updating the configuration files. 0, XML_CURSOR_SKIP_EABLE Selects whether to skip displaying the cursor on line 1 (id=1) of the display on the XML menu. : Enable skipping the cursor display on line 1 (id=1) : Disable XMLAPP_URL_REDIAL_KE STRIG When the redial key is defined by an XML element, specifies the URL that is accessed when the [REDIAL] key is pressed. Max.256 characters (The ampersand [&] character is available) Empty string

18 Call Center Settings UC_HOTELIG_MODE ITEGER Specifies the Flexible Seating mode. This service allows a guest to use the host's device as his own. 0: Hoteling not supported 1: Hoteling supported 2: Host 3: Guest 0 UC_FLEXIBLESEATIG_ULOCKPI STRIG Specifies the unlock PI for Flexible Seating digits Empty string SIP Settings SIP_183_TALK_EABLE Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP 183 message. : Talking : Calling SRTP Settings DISPLA_SRTP_CALL_EABLE Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP). : Display an icon for encrypted calls : Disable

19 uacsta Settings UACSTA_EABLE_n Parameter ame Example UACSTA_EABLE_1, UACSTA_EABLE_2 Selects whether to enable or disable the uacsta feature. : Enable : Disable Telephone Settings UM_PLA_PICKUP_GROUP Web User Interface Reference STRIG Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) Empty string Group Call Pickup Flexible Button Settings Change the followings in " FLEX_BUTTO_FACILIT_ACTx " on page 281. (Before) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP

20 Call Control Settings DIALPLA_REPLACE_LOG_EABLE Specifies whether to log the number after it was modified by the Dial Plan or the number as it was input. : Log the number in the outgoing call log after it was modified by the Dial Plan : Log the number in the outgoing call log as it was input DIALPLA_MEMOR_DIAL_EABLE Specifies whether to enable Dial Plan processing for memory dialing. : Enable Dial Plan : Disable SIGALIG_AUTO_AS_EABLE_n Parameter ame Example SIGALIG_AUTO_AS_EABLE_1, SIGALIG_AUTO_AS_EABLE_2 Specifies whether to enable paging mode with "Click to Dial". : Enable : Disable Logging Settings SSLOG_OUT_START Specifies whether to enable or disable exporting of the Application Log : Enable export to syslog : Disable

21 KX HDV130 Software File Version or later VoIP Settings [Line 1] [Line 2] Change the in " SRTP Mode " on page 134. (Before) (After) SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. 0:SRTP 1:RTP/SRTP 2:Panasonic Original 3:SRTP/RTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Call Control Add the following WEB setting. Missed Call otification - Message Configuration File Reference Selects whether to display 'Missed calls' on the screen in standby mode. es o es OTIF_MISSEDCALL_EABLE Missed Call otification - LED Configuration File Reference Selects whether the LED is used to indicate a missed call es o es OTIF_MISSEDCALL_LED_EABLE Voice Message otification - Message Configuration File Reference Selects whether to display 'Voice MSG' on the screen in standby mode. es o es OTIF_VOIC _EABLE

22 Voice Message otification - LED Configuration File Reference Selects whether the LED is used to indicate a new voice message. es o es OTIF_VOIC _LED_EABLE Voice Message otification - Alarm Configuration File Reference Selects whether an alarm sound is used to indicate a new voice message. es o es OTIF_VOIC _ALARM_EABLE System Settings OTIFICATIO_MEU_EABLE Specifies whether to display the notification settings under MEU. : Display the notification settings : Do not display OTIF_MISSEDCALL_EABLE Web User Interface Reference Specifies whether to display 'Missed calls' on the screen in standby mode. : Enable displaying 'Missed calls' in standby mode. : Disable Missed Call otification - Message OTIF_VOIC _EABLE Web User Interface Reference Specifies whether to display 'Voice MSG' on the screen in standby mode. : Enable displaying 'Voice MSG' in standby mode. : Disable Voice Message otification - Message

23 ECO_MODE_MEU_EABLE Specifies whether the "ECO mode" setting is displayed under MEU. : Enable displaying the ECO mode function under MEU. : Disable OTIF_MISSEDCALL_LED_EABLE Web User Interface Reference Specifies whether the LED is used to indicate a missed call : Enable LED indication for a missed call. : Disable Missed Call otification - LED OTIF_VOIC _LED_EABLE Web User Interface Reference Specifies whether the LED is used to indicate a missed call : Enable LED indication for a missed call. : Disable Voice Message otification - LED OTIF_VOIC _ALARM_EABLE Web User Interface Reference Specifies whether an alarm sound is used to indicate a new voice message. : Enable alarms sound for voice messages. : Disable Voice Message otification - Alarm OTIFICATIO_ALARM_TPE ITEGER Specifies whether a voice mail alarm notification is used only the first time or every time. 0: First time only 1: Every time 0 BOOTLOG_SERVER_URI STRIG Specifies the URI for a boot logging server. Max. 256 characters Empty string

24 XML Settings Change the in " XML_SOFT_KE_AMEx ". XML_SOFT_KE_AMEx STRIG x=1-3 Specifies the name of Soft Key A/B/C assigned to an XML application. (Before) (After) Max. 5 characters Max. 16 characters XML etwork Phonebook (Common) W_PHOEBOOK_ADVACED_SERACH Specifies whether to perform a narrowing search with the LDAP phonebook. : Enable : Disable SIP Settings SED_180_ALERT_EABLE Specifies whether to send 180 before an alert. : Send 180 : Do not send 180

25 SRTP Settings Change the in " SRTP_COECT_MODE_n " on page 270. (Before) 0: SRTP 1: RTP/SRTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. (After) 0: SRTP 1: RTP/SRTP 2: SRTP & RTP (Panasonic PBX only) 3: SRTP & RTP (RTP/AVP, a=crypto) ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Telephone Settings CALLPARK_METHOD ITEGER Specifies the method for the "Call Park" function. 1: Info message type 2: Refer type 2 CALL_PARK_PROG_KE_MODE ITEGER Specifies the Call Park operation when it is assigned to a function key. 0: umbering plan 1: Specified park area with "CALLPARK_METHOD". 0

26 Flexible Button Settings Change the in " FLEX_BUTTO_FACILIT_ACTx " on page 281. (Before) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_APPLICATIO, X_PAASOIC_IPTEL_GROUPPICKUP

27 KX HDV130 Software File Version or later TWAMP Settings Add the TWAMP Settings to the [etwork] tab of Web User Interface Programming. Add the following web settings to the TWAMP settings. Enable TWAMP Configuration File Reference Selects whether to enable the TWAMP server function. es o o TWAMP_EABLE Control Port Configuration File Reference Specifies the port for the TWAMP control session TWAMP_COTROL_PORT Test Port Configuration File Reference Specifies the port for the TWAMP test session TWAMP_TEST_PORT Wait Time for Control Configuration File Reference Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session TWAMP_SERVER_WAIT_TIME Wait Time for Reflector Configuration File Reference Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session TWAMP_REFLECTOR_WAIT_TIME

28 System Settings DISPLA_DIVERSIO_EABLE Specifies whether the "Diversion" call information is displayed when receiving an incoming call. : Enable displaying the "Diversion" information : Disable Telephone Settings SUBS_CALLPARK_AREA_EABLE Specifies whether to send "SUBSCRIBE" for each call park area. : Enable sending "SUBSCRIBE" for each call park area. : Disable TWAMP Settings Add the TWAMP Settings to Configuration File Programming. Add the following configuration parameter to the TWAMP settings. TWAMP_EABLE Web User Interface Reference Specifies whether to enable the TWAMP server function. : Enable the TWAMP server function. : Disable Enable TWAMP TWAMP_COTROL_PORT Web User Interface Reference ITEGER Specifies the port for the TWAMP control session Control Port

29 TWAMP_TEST_PORT Web User Interface Reference ITEGER Specifies the port for the TWAMP test session Test Port TWAMP_SERVER_WAIT_TIME Web User Interface Reference ITEGER Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session Wait Time for Control TWAMP_REFLECTOR_WAIT_TIME Web User Interface Reference ITEGER Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session Wait Time for Reflector TWAMP_PADDIG_ZERO Specifies the packet padding for the TWAMP test session. : All zeros : Random

30 KX HDV130 Software File Version or later System Settings Add the following configuration parameters. CODEC_VAD_CG_EABLE Specifies whether to enable the VAD and CG functions. (VAD :Voice Activity Detector, CG: Comfort oise Generator) : Enable the VAD and CG functions : Disable ERROR_AUTO_REBOOT_TIME ITEGER Specifies the amount of time, in hours, until the unit automatically reboots when the SIP registration has been removed for all accounts. 0, 1-72 (0: Disable) Provisioning Settings CFG_BOOTUP_DURATIO_EABLE Specifies whether to enable "CFG_RESC_TIME" and "CFG_RESC_DURATIO" at startup. : Enable : Disable SIP Settings SIP_DSSRV_EA_APTR_n Parameter ame Example SIP_DSSRV_EA_APTR_1,SIP_DSSRV_EA_APTR_2 Specifies whether to enable the use of the APTR sequence. : Enable : Disable

31 Telephone Settings Add the following configuration parameters. RIGER_VOLUME_LEVEL ITEGER Specifies the value of the ringer volume RIGER_VOL_OPERATIO_EABLE Specifies whether to enable ringer volume adjustment. : Enable ringer volume adjustment : Disable Call Control Settings Add the following configuration parameters. TALKIG_SOFT_KE_A ITEGER Specifies the display icon of soft key A during a call. 0: Original 1: Line 2: Menu 3: Blind transfer 4: Flash/Recall 5: Incoming Log 6: Outgoing Log 7: Phonebook 8: Call Park 9: Pause 10: Private Hold 0 TALKIG_SOFT_KE_B ITEGER Specifies the display icon of soft key B during a call. 0: Original 1: Line 2: Menu 3: Blind transfer 4: Flash/Recall 5: Incoming Log 6: Outgoing Log 7: Phonebook 8: Call Park 9: Pause 10: Private Hold 0

32 TALKIG_SOFT_KE_C ITEGER Specifies the display icon of soft key C during a call. 0: Original 1: Line 2: Menu 3: Blind transfer 4: Flash/Recall 5: Incoming Log 6: Outgoing Log 7: Phonebook 8: Call Park 9: Pause 10: Private Hold 0 PQX8313UA PP0316SM5017