Взято и поправлено: w_threaded

Size: px
Start display at page:

Download "Взято и поправлено: w_threaded"

Transcription

1 Взято и поправлено: w_threaded Данная конфигурация представлена для работы с встроенным модулем голосовой почты, МОН и конференцией Прошу учесть что конфиг написан для работы с маршрутизацией мультикаста МОН!! Last configuration change at 20:05:17 UTC Wed Oct ! NVRAM config last updated at 20:05:21 UTC Wed Oct ! NVRAM config last updated at 20:05:21 UTC Wed Oct version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption! hostname MLBCME01! boot-start-marker boot system flash flash:c2900-universalk9-mz.spa t1.bin boot-end-marker!! card type e1 0 0 enable password cisco! no aaa new-model! network-clock-participate wic 0! no ipv6 cef!!! ip multicast-routing ip dhcp excluded-address ip dhcp excluded-address ip dhcp excluded-address ! ip dhcp pool VOICE_SCOPE network default-router option 150 ip lease 0 0 1! ip dhcp pool DATA_SCOPE network default-router !! ip cef no ip igmp snooping! multilink bundle-name authenticated!!!! isdn switch-type primary-net5! crypto pki token default removal timeout 0! crypto pki trustpoint TP-self-signed enrollment selfsigned subject-name cn=ios-self-signed-certificate revocation-check none rsakeypair TP-self-signed !! crypto pki certificate chain TP-self-signed certificate self-signed 01 nvram:ios-self-sig#1.cer voice-card 0 dspfarm dsp services dspfarm no local-bypass!! voice call send-alert voice call disc-pi-off voice rtp send-recv! voice service voip allow-connections h323 to sip allow-connections sip to sip signaling forward none fax protocol t38 nse force version 0 ls-redundancy 0 hs-redundancy 0 fallback none h323 sip! voice class codec 100 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 4 g729r8! voice class codec 101 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 4 g729r8!!!!!! license udi pid CISCO2911/K9 sn FGL license accept end user agreement hw-module ism 0! 1 / 5

2 hw-module pvdm 0/0! hw-module pvdm 0/1! hw-module sm 1!!! file privilege 0 username admin password 0 cisco! redundancy!!!!! controller E1 0/0/0 pri-group timeslots 1-21!!!!!!!!!! interface Loopback0 ip address ip pim sparse-dense-mode! interface Embedded-Service-Engine0/0 no ip address shutdown! interface GigabitEthernet0/0 no ip address duplex auto speed auto! interface GigabitEthernet0/0.101 description subinterface for Data VLAN encapsulation dot1q 101 ip address ip pim sparse-dense-mode! interface GigabitEthernet0/0.102 description subinterface for Voice VLAN encapsulation dot1q 102 ip address ip pim sparse-dense-mode! interface GigabitEthernet0/0.103 description subinterface for Corporate Wireless VLAN encapsulation dot1q 103 ip address ip pim sparse-dense-mode! interface GigabitEthernet0/0.104 description subinterface for Data Wireless VLAN encapsulation dot1q 104 ip address ip pim sparse-dense-mode! interface ISM0/0 ip address !Application: Running! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto! interface GigabitEthernet0/2 ip address duplex auto speed auto! interface ISM0/1 description Internal switch interface connected to Internal Service Module no ip address! interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice no cdp enable! interface Integrated-Service-Engine1/0 ip unnumbered Loopback0 service-module ip address !Application: CUE Running on NME service-module ip default-gateway no keepalive! interface Vlan1 no ip address! ip forward-protocol nd! ip http server ip http authentication local ip http secure-server ip http path flash0:/gui! ip route Integrated-Service-Engine1/0!!!!!! tftp-server flash0:/phones/6921_6941_6961/sccp/dsp69xx zz.sgn alias DSP69xx zz.sgn tftp-server flash0:/phones/6921_6941_6961/sccp/boot69xx zz.sgn alias BOOT69xx zz.sgn tftp-server flash0:/phones/6921_6941_6961/sccp/sccp69xx loads alias SCCP69xx loads tftp-server flash0:/phones/6921_6941_6961/sccp/sccp69xx zz.sgn alias SCCP69xx zz.sgn tftp-server flash0:/phones/6921_6941_6961/sccp/apps37sccp bin alias apps37sccp bin tftp-server flash:ringlist.xml tftp-server flash:analog1.raw tftp-server flash:bass.raw tftp-server flash:filmscore.raw tftp-server flash:harpsynth.raw tftp-server flash:jamaica.raw tftp-server flash:kotoeffect.raw tftp-server flash:musicbox.raw tftp-server flash:piano1.raw tftp-server flash:piano2.raw tftp-server flash:pop.raw tftp-server flash:chime.raw tftp-server flash:distinctiveringlist.xml! control-plane!! voice-port 0/0/0:15! ccm-manager music-on-hold bind Loopback0!! mgcp profile default! sccp local Loopback0 sccp ccm identifier 1 version 7.0 sccp! sccp ccm group 1 bind interface Loopback0 associate ccm 1 priority 1 associate profile 1 register CFB_Hardware! dspfarm profile 1 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 2 associate application SCCP! dial-peer voice 1001 pots description Emergency Calling preference 1 destination-pattern 0000 port 0/0/0:15 forward-digits all! dial-peer voice 1101 pots description Satelite Telephones preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1111 pots description Paging preference 1 destination-pattern 0016T port 0/0/0:15 2 / 5

3 forward-digits all! dial-peer voice 1121 pots description National Modem preference 1 destination-pattern 0019T port 0/0/0:15 forward-digits all! dial-peer voice 1231 pots description Local VIC preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1241 pots description Mobile preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1251 pots description Number Mobility preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1271 pots description STD QLD preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1281 pots description STD WA, SA & NT preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1341 pots description Local Region 3 preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1361 pots description Local Region 6 preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1381 pots description Local Region 8 preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1391 pots description Local Region 9 preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1401 pots description Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1411 pots description Information Services preference 1 destination-pattern 0110[1-9]00 port 0/0/0:15 forward-digits all! dial-peer voice 1421 pots description Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1431 pots description Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1441 pots description Information Services preference 1 destination-pattern 0114[0-3]... port 0/0/0:15 forward-digits all! dial-peer voice 1451 pots description Information Services preference 1 destination-pattern 0114[5-9]... port 0/0/0:15 forward-digits all! dial-peer voice 1461 pots description Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1471 pots description Information Services preference 1 destination-pattern 012[2-3]. port 0/0/0:15 forward-digits all! dial-peer voice 1481 pots description pots Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1491 pots description Information Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1501 pots description Information Services preference 1 destination-pattern T port 0/0/0:15 forward-digits all! dial-peer voice 1511 pots description Local 13 Services preference 1 destination-pattern 013[1-3]... port 0/0/0:15 forward-digits all! dial-peer voice 1521 pots description Local 13 Services preference 1 destination-pattern 0134[0-4].. port 0/0/0:15 forward-digits all! dial-peer voice 1531 pots description Local 13 Services preference 1 destination-pattern 0134[6-9].. port 0/0/0:15 forward-digits all! dial-peer voice 1541 pots description Local 13 Services preference 1 destination-pattern 013[5-9]... port 0/0/0:15 forward-digits all! dial-peer voice 1581 pots description Freecall 1800 Services preference 1 destination-pattern 0180[2-9]... port 0/0/0:15 forward-digits all! dial-peer voice 1551 pots description Local 13 Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1561 pots description 1300 Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 1571 pots description Freecall 1800 Services preference 1 destination-pattern 0180[01]... port 0/0/0:15 forward-digits all! dial-peer voice 1591 pots description Calling Card Services preference 1 destination-pattern port 0/0/0:15 forward-digits all! dial-peer voice 30 voip mailbox-selection orig-called-num description "CUE Voic Pilot Number" 3 / 5

4 destination-pattern 1100 session protocol sipv2 session target ipv4: dtmf-relay sip-notify codec g711ulaw no vad! dial-peer voice 31 voip description "Main Number" destination-pattern 9999 session protocol sipv2 session target ipv4: dtmf-relay sip-notify codec g711ulaw no vad!!!! gatekeeper shutdown!! credentials!! telephony-service sdspfarm units 1 sdspfarm tag 1 CFB_Hardware conference hardware moh-file-buffer no auto-reg-ephone authentication credential cisco cisco max-ephones 48 max-dn 100 ip source-address port 2000 timeouts interdigit 5 timeouts busy 20 timeouts ringing 20 url directories url services url authentication load 7937 apps37sccp load 6921 SCCP69xx load 6941 SCCP69xx time-zone 47 date-format dd-mm-yy voic 1100 max-conferences 8 gain -6 call-forward pattern.t moh "flash0:/music-on-hold.au" multicast moh port route web admin system name cisco password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern.t secondary-dialtone 0 create cnf-files version-stamp 7960 Oct :17:14!! ephone-template 1 service phone settingaccess 1 service phone webaccess 0 softkeys hold Resume Newcall Select Join softkeys idle Redial Newcall Cfwdall Gpickup softkeys seized Redial Endcall Cfwdall Gpickup softkeys alerting Endcall softkeys connected Hold Endcall Trnsfer Confrn ConfList Select Join Park softkeys ringing Answer Dnd!! ephone-dn 1 dual-line number 9901 secondary no-reg description call-forward busy 1100 call-forward noan 1100 timeout 20!! ephone-dn 2 dual-line number 9902 secondary no-reg description call-forward busy 1100 call-forward noan 1100 timeout 20!! ephone-dn 50 number 1500!! ephone-dn 80 octo-line number C00 conference ad-hoc no huntstop!! ephone-dn 81 octo-line number C01 conference ad-hoc no huntstop!! ephone-dn 82 octo-line number C02 conference ad-hoc no huntstop!! ephone-dn 83 octo-line number C03 conference ad-hoc no huntstop!! ephone-dn 90 number A mwi on!! ephone-dn 91 number A mwi off!! ephone-dn 92 number 1122 no-reg primary park-slot!! ephone-dn 93 number 1123 no-reg primary park-slot!! ephone-dn 94 number 1124 no-reg primary park-slot!! ephone-dn 95 number 1125 no-reg primary park-slot!! ephone 1 device-security-mode none mac-address 44D3.CAD4.5FD7 ephone-template 1 max-calls-per-button 2 type 6941 button 1:1!!! ephone 2 device-security-mode none mac-address 44D3.CA59.32CB ephone-template 1 max-calls-per-button 2 type 6921 button 1:2!!! ephone 50 device-security-mode none mac-address 0004.F2ED.FA3C button 1:50!!!! line con 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 67 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh line 131 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 exec-timeout 0 0 privilege level 15 password cisco login local transport input all! scheduler allocate end 4 / 5

5 5 / 5

Multicast Music-on-Hold Support on Cisco UBE

Multicast Music-on-Hold Support on Cisco UBE First Published: July 22, 2011 Last Updated: July 22, 2011 The Multicast Music-on-Hold (MMOH) feature enables you to subscribe to a music streaming service when you are using a Cisco Unified Border Element.

More information

Conferencing. Restrictions for Conferencing. Information About Conferencing. Conferencing Overview

Conferencing. Restrictions for Conferencing. Information About Conferencing. Conferencing Overview Restrictions for, on page 1 Information About, on page 1 Configure, on page 9 Configuration Examples for, on page 36 Where to Go Next, on page 57 Feature Information for, on page 57 Restrictions for When

More information

NATIONAL_WATER_CONSERVATION#sh run Building configuration...

NATIONAL_WATER_CONSERVATION#sh run Building configuration... NATIONAL_WATER_CONSERVATION#sh run Building configuration... Current configuration : 6390 bytes Last configuration change at 13:01:34 UTC Tue Jul 4 2017 by kembo version 15.4 service timestamps debug datetime

More information

Sample Business Ready Branch Configuration Listings

Sample Business Ready Branch Configuration Listings APPENDIX A Sample Business Ready Branch Configuration Listings The following is a sample configuration of a Business Ready Branch. There are many permutations of feature combinations when setting up the

More information

VG224 Voice Gateway SCCP Registration with CME Configuration Example

VG224 Voice Gateway SCCP Registration with CME Configuration Example VG224 Voice Gateway SCCP Registration with CME Configuration Example Document ID: 115021 Contributed by Hussain Ali, Cisco TAC Engineer. Nov 29, 2012 Contents Introduction Prerequisites Requirements Components

More information

Unified Border Element (CUBE) with Cisco Unified Communications Manager (CUCM) Configuration Example

Unified Border Element (CUBE) with Cisco Unified Communications Manager (CUCM) Configuration Example Unified Border Element (CUBE) with Cisco Unified Communications Manager (CUCM) Configuration Example Document ID: 99863 Contents Introduction Prerequisites Requirements Components Used Conventions Configure

More information

Cox SIP Trunking: Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE 3.

Cox SIP Trunking: Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE 3. Application Note Cox SIP Trunking: Cisco Unified Communications Manager 11.0.1 with Cisco Unified Border Element (CUBE 11.5.0) on ISR4321 [IOS-XE 3.17] using SIP April 2017 Page 1 of 86 Table of Contents

More information

Information About Single Number Reach, on page 1 Configure Single Number Reach, on page 4 Feature Information for Single Number Reach, on page 16

Information About Single Number Reach, on page 1 Configure Single Number Reach, on page 4 Feature Information for Single Number Reach, on page 16 Information About, on page 1 Configure, on page 4 Feature Information for, on page 16 Information About Overview of The (SNR) feature allows users to answer incoming calls to their extension on either

More information

IEEE 802.1Q Tunneling (QnQ) and L2PT on L2 Ports

IEEE 802.1Q Tunneling (QnQ) and L2PT on L2 Ports Revised: November 11, 2011, OL-20468-01 First Published: November 11, 2011 Last Updated: November 11, 2011 This feature provides Layer 2 Tunneling support for QnQ and Layer 2 Protocol Tunneling (L2PT)

More information

Lync Server 2013 using SIP trunk to Cisco Unified Communications Manager Release 10.0

Lync Server 2013 using SIP trunk to Cisco Unified Communications Manager Release 10.0 Application No Application Note Lync Server 2013 using SIP trunk to Cisco Unified Communications Manager Release 10.0 Page 1 of 111 Table of Contents Introduction... 4 Network Topology... 6 System Components...

More information

Voice Mail Integration

Voice Mail Integration This chapter describes how to integrate your voice-mail system with Cisco Unified Communications Manager Express (Cisco Unified CME). Prerequisites for, page 1 Information About Voice-Mail Integration,

More information

EarthLink Business SIP Trunking. Cisco CUCM 10.5 with CUBE Customer Configuration Guide

EarthLink Business SIP Trunking. Cisco CUCM 10.5 with CUBE Customer Configuration Guide m EarthLink Business SIP Trunking Cisco CUCM 10.5 with CUBE Customer Configuration Guide Publication History First Release: Version 1.0 August 30, 2011 CHANGE HISTORY Version Date Change Details Changed

More information

Configuring SRST Fallback Support

Configuring SRST Fallback Support Configuring SRST Fallback Support Last Updated: March 26, 2007 This chapter describes SRST fallback support using Cisco Unified Communications Manager Express (Cisco Unified CME). Finding Feature Information

More information

Transcoding. Note. Cisco Unified Border Element Configuration Guide 1

Transcoding. Note. Cisco Unified Border Element Configuration Guide 1 is a process of converting one voice codec to another. For example, transcoding ilbc-g.711 or ilbc-g.729. LTI based Internal API is used to access Digital Signaling Processor (DSP) resources for transcoding.

More information

Lab Configuring Basic RIPv2 (Solution)

Lab Configuring Basic RIPv2 (Solution) (Solution) Topology 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 15 Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway

More information

Lab Troubleshooting IPv4 and IPv6 Static Routes (Instructor Version Optional Lab)

Lab Troubleshooting IPv4 and IPv6 Static Routes (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Lab Designing and Implementing a VLSM Addressing Scheme. Topology. Objectives. Background / Scenario

Lab Designing and Implementing a VLSM Addressing Scheme. Topology. Objectives. Background / Scenario CSNB214 Packet Tracer Lab Designing and Implementing a VLSM Addressing Scheme Topology Objectives Part 1: Examine Network Requirements Part 2: Design the VLSM Address Scheme Part 3: Cable and Configure

More information

CME 4.1 Hardware Conferencing Tech Tips. May 15, 2007

CME 4.1 Hardware Conferencing Tech Tips. May 15, 2007 CME 4.1 Hardware Conferencing Tech Tips May 15, 2007 Revision Author Comments History 1.0 Tony Huynh Initial Draft 2.0 Tony Huynh Added common configuration errors Table of Contents 1. Introduction...3

More information

Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with E1 PRI NET5 Signaling

Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with E1 PRI NET5 Signaling Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with E1 PRI NET5 Signaling This document describes the interoperability and configuration of a Cisco 2621 voice gateway with a Lucent/Avaya

More information

Configuring Call Blocking

Configuring Call Blocking Last Updated: March 13, 2009 This chapter describes Call Blocking features in Cisco Unified Communications Manager Express (Cisco Unified CME). Finding Feature Information in This Module Your Cisco Unified

More information

Lab Configuring 802.1Q Trunk-Based Inter-VLAN Routing (Instructor Version Optional Lab)

Lab Configuring 802.1Q Trunk-Based Inter-VLAN Routing (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Call Blocking. Information About Call Blocking. Call Blocking Based on Date and Time (After-Hours Toll Bar)

Call Blocking. Information About Call Blocking. Call Blocking Based on Date and Time (After-Hours Toll Bar) Information About, page 1 Configure, page 4 Configuration Examples for, page 16 Where to Go Next, page 18 Feature Information for, page 18 Information About Based on Date and Time (After-Hours Toll Bar)

More information

Acronyms Important Information... 71

Acronyms Important Information... 71 Connecting Cisco Unified Communication Manager [v11.5.1] to British Telecom Global SIP Trunking Service via Cisco Unified Border Element v12.0 [IOS-XE 16.06.01] December 7, 2017 Page 1 of 72 Table of Contents

More information

Configure IOS-XE to display full show running-config for users with low Privilege Levels

Configure IOS-XE to display full show running-config for users with low Privilege Levels Configure IOS-XE to display full show running-config for users with low Privilege Levels Contents Introduction Prerequisites Requirements Components Used Configuration Problem Configuration Solution and

More information

Lab - Configuring Basic DHCPv4 on a Router (Solution)

Lab - Configuring Basic DHCPv4 on a Router (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.0.1 255.255.255.0 N/A G0/1 192.168.1.1 255.255.255.0 N/A S0/0/0 (DCE) 192.168.2.253

More information

Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with T1 PRI Signaling

Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with T1 PRI Signaling Cisco 2621 Gateway-PBX Interoperability: Lucent/Avaya Definity G3si with T1 PRI Signaling This document describes the interoperability and configuration of a Cisco 2621 voice gateway with a Lucent/Avaya

More information

Tech Note: Configuring Q.SIG PRI trunk between Cisco Call Manager and Avaya S8700/G650 with Cisco Unity Voice Mail integration

Tech Note: Configuring Q.SIG PRI trunk between Cisco Call Manager and Avaya S8700/G650 with Cisco Unity Voice Mail integration Tech Note: Configuring Q.SIG PRI trunk between Cisco Call Manager and Avaya S8700/G650 with Cisco Unity Voice Mail integration The objective of this document is to provide Cisco s customers and business

More information

Troubleshooting VLANs and Trunks

Troubleshooting VLANs and Trunks L2 Troubleshooting VLANs and Trunks Global Knowledge Training LLC L2-1 Objectives In this lab you will download configuration files into PxSW s running configuration to introduce VLAN and trunking issues

More information

Lab Configuring Per-Interface Inter-VLAN Routing (Solution)

Lab Configuring Per-Interface Inter-VLAN Routing (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.20.1 255.255.255.0 N/A G0/1 192.168.10.1 255.255.255.0 N/A S1 VLAN 10 192.168.10.11

More information

Customize Softkeys. Information About Softkeys. Softkeys on IP Phones

Customize Softkeys. Information About Softkeys. Softkeys on IP Phones Information About Softkeys, page 1 Configure Softkeys, page 14 Configuration Example for Softkeys, page 34 Feature Information for Softkeys, page 38 Information About Softkeys Softkeys on IP Phones You

More information

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR 4K [IOS-XE 3.16] using SIP

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR 4K [IOS-XE 3.16] using SIP Application Note Cox SIP Trunking: Cisco Unified Communications Manager 11.0.1 with Cisco Unified Border Element (CUBE 11.1.0) on ISR 4K [IOS-XE 3.16] using SIP November 11, 2015 Page 1 of 57 Table of

More information

Lab Configuring Per-Interface Inter-VLAN Routing (Instructor Version)

Lab Configuring Per-Interface Inter-VLAN Routing (Instructor Version) (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Objectives Device Interface IP Address Subnet Mask

More information

Lab Configuring Dynamic and Static NAT (Solution)

Lab Configuring Dynamic and Static NAT (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway Gateway G0/1 192.168.1.1 255.255.255.0 N/A S0/0/1 209.165.201.18 255.255.255.252 N/A ISP S0/0/0 (DCE)

More information

Configuring EtherChannel

Configuring EtherChannel L4 Configuring EtherChannel Global Knowledge Training LLC L4-1 Objectives In this lab you will first verify that one of the parallel connections to the core switch is blocked by STP. You will then configure

More information

Configuring FXS Ports for Basic Calls

Configuring FXS Ports for Basic Calls Configuring FXS Ports for Basic Calls First Published: October 2, 2008 Last updated: March 19, 2010 This module describes how to configure analog Foreign Exchange Station (FXS) ports on a Cisco Integrated

More information

Lab Configuring Dynamic and Static NAT (Instructor Version Optional Lab)

Lab Configuring Dynamic and Static NAT (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Configuring Modem Transport Support for VoIP

Configuring Modem Transport Support for VoIP Configuring Modem Transport Support for VoIP This chapter explains how to configure modem transport support for Voice over IP (VoIP) and contains the following sections: Modem Transport Support Overview,

More information

Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers

Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers This chapter describes how to configure ISDN PRI interfaces to support the integration of data and voice calls

More information

Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers

Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers Integrated Data and Voice Services for ISDN PRI Interfaces on Multiservice Access Routers This chapter describes how to configure ISDN PRI interfaces to support the integration of data and voice calls

More information

Lab Configuring Port Address Translation (PAT) (Instructor Version)

Lab Configuring Port Address Translation (PAT) (Instructor Version) (Instructor Version) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Objectives Device Interface IP Address Subnet Mask

More information

CONFIGURATION DU SWITCH

CONFIGURATION DU SWITCH Current configuration : 2037 bytes version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption hostname Switch no aaa new-model ip subnet-zero

More information

Lab Configuring IPv4 Static and Default Routes (Solution)

Lab Configuring IPv4 Static and Default Routes (Solution) (Solution) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.0.1 255.255.255.0 N/A S0/0/1 10.1.1.1 255.255.255.252 N/A R3 G0/1 192.168.1.1 255.255.255.0

More information

Lab Configuring Basic Router Settings with IOS CLI (Instructor Version Optional Lab)

Lab Configuring Basic Router Settings with IOS CLI (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

The information contained in this document is confidential and proprietary to tekvizion PVS, Inc.

The information contained in this document is confidential and proprietary to tekvizion PVS, Inc. Copyright 2012 by tekvizion PVS, Inc. All Rights Reserved. Confidential Information The information contained in this document is confidential and proprietary to tekvizion PVS, Inc. This document is the

More information

Configuring Voice and Data Support on 1-Port, 2-Port, and 4-Port VWIC3

Configuring Voice and Data Support on 1-Port, 2-Port, and 4-Port VWIC3 Configuring Voice and Data Support on 1-Port, 2-Port, and 4-Port VWIC3 Last Updated: February 3, 2011, This module describes how to configure voice and data support on the next generation of voice/wan

More information

Advanced IPv6 Training Course. Lab Manual. v1.3 Page 1

Advanced IPv6 Training Course. Lab Manual. v1.3 Page 1 Advanced IPv6 Training Course Lab Manual v1.3 Page 1 Network Diagram AS66 AS99 10.X.0.1/30 2001:ffXX:0:01::a/127 E0/0 R 1 E1/0 172.X.255.1 2001:ffXX::1/128 172.16.0.X/24 2001:ff69::X/64 E0/1 10.X.0.5/30

More information

Configure Q.SIG PRI Trunks between Call Manager and Avaya S8700/G650 with Unity Voice Mail Integration

Configure Q.SIG PRI Trunks between Call Manager and Avaya S8700/G650 with Unity Voice Mail Integration Configure Q.SIG PRI Trunks between Call Manager and Avaya S8700/G650 with Unity Voice Mail Integration Document ID: 63790 Contents Introduction Prerequisites Requirements Components Used Conventions Test

More information

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE ] using SIP

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE ] using SIP Fusion Connect SIP Trunking: Application Note Cisco Unified Communications Manager 11.5.1 with Cisco Unified Border Element (CUBE 11.5.2) on ISR4321 [IOS-XE 16.3.1] using SIP October 2016 Page 1 of 51

More information

Directory Services. Information About Directory Services. Local Directory

Directory Services. Information About Directory Services. Local Directory Information About, on page 1 Configure, on page 3 Configuration Examples for, on page 13 Feature Information for, on page 18 Information About Local Directory Cisco Unified CME automatically creates a

More information

Connecting Cisco Unified Communication Manager [v12.0.1] to Cox Business SIP Trunks via Cisco Unified Border Element v12.0 [IOS- XE

Connecting Cisco Unified Communication Manager [v12.0.1] to Cox Business SIP Trunks via Cisco Unified Border Element v12.0 [IOS- XE Connecting Cisco Unified Communication Manager [v12.0.1] to Cox Business SIP Trunks via Cisco Unified Border Element v12.0 [IOS- XE 16.06.01] January 24, 2018 Page 1 of 73 Table of Contents Introduction...

More information

Implementing EIGRP. Global Knowledge Training LLC L7-1

Implementing EIGRP. Global Knowledge Training LLC L7-1 L7 Implementing EIGRP Global Knowledge Training LLC L7-1 Objectives In this lab you will configure EIGRP on your pod routers. The core router is already configured for EIGRP. You will first remove the

More information

Configuring the Eight-Port FXS RJ-21 Module

Configuring the Eight-Port FXS RJ-21 Module CHAPTER 7 Configuring the Eight-Port FXS RJ-21 Module The Eight-port RJ-21 FXS Module is a high-density analog phone and fax relay interface. By providing service to analog phones and fax machines, the

More information

Cisco Press CCIE Practical Studies CCIE Practice Lab: Enchilada Solutions

Cisco Press CCIE Practical Studies CCIE Practice Lab: Enchilada Solutions Cisco Press CCIE Practical Studies CCIE Practice Lab: Solutions Cisco Press CCIE Practical Studies CCIE Practice Lab: LAB Book Chapter Book Page The 18 1161 Overview... 3 Technical Details... 3 Table 54-1:

More information

Cisco Unified Communications Manager Express 7921 Push-to-talk

Cisco Unified Communications Manager Express 7921 Push-to-talk Cisco Unified Communications Manager Express 7921 Push-to-talk Application Note May 13, 2008 Cisco Revision History Revision Date Author Comments 1 03/29/2007 Tony Huynh Version 1.0 Table of Contents 1

More information

Using Cisco Unified Communications Manager to Configure Conferencing, Transcoding, and Media Termination Point

Using Cisco Unified Communications Manager to Configure Conferencing, Transcoding, and Media Termination Point Using Cisco Unified Communications Manager to Configure Conferencing, Transcoding, and Media Termination Point This chapter describes the steps for enabling conferencing, transcoding, and media termination

More information

Cisco Unified SRST and Cisco Unified SIP SRST Command Reference (All Versions)

Cisco Unified SRST and Cisco Unified SIP SRST Command Reference (All Versions) Cisco Unified SRST and Cisco Unified SIP SRST Command Reference (All Versions) Last Modified: 2017-11-30 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com

More information

Configuration Examples

Configuration Examples APPENDIX A This appendix shows some examples of the configuration in the Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers Cisco 2600 Series Router Configuration Example Following is

More information

Configuring Phones to Make Basic Calls

Configuring Phones to Make Basic Calls Last Updated: April 25, 2012 This module describes how to configure Cisco Unified IP phones in Cisco Unified Communications Manager Express (Cisco Unified CME) so that you can make and receive basic calls.

More information

EHWIC-4SHDSL-EA module Fixed ISR G2 routers like C888EA-K9 work in both CO and CPE modes with Cisco IOS Software 15.2(2)T2 and later releases.

EHWIC-4SHDSL-EA module Fixed ISR G2 routers like C888EA-K9 work in both CO and CPE modes with Cisco IOS Software 15.2(2)T2 and later releases. Contents Introduction Prerequisites Requirements Components Used Configure Configurations ATM mode EFM mode Introduction This document describes configuration steps required to implement a back-to-back

More information

This feature was introduced.

This feature was introduced. Feature History Release 12.2(11)T Modification This feature was introduced. This document describes the QSIG for TCL IVR (Tool Language Interactive Voice Response) 2.0 feature in and includes the following

More information

Configuring Directory Services

Configuring Directory Services Configuring Directory Services Last Updated: August 10, 2011 This chapter describes the directory services support available in Cisco Unified Communications Manager Express (Cisco Unified CME). Finding

More information

Application Note. Jan 30, 2012

Application Note. Jan 30, 2012 Application Note AT&T IP Flexible Reach Service on MIS, MPLS PNT or AT&T VPN: Connecting Cisco Unified Communications Manager 8.0 with Cisco Unified Border Element Release 8.5 High availability - Hot Standby

More information

Configuring the Cisco IPICS RMS Component

Configuring the Cisco IPICS RMS Component Configuring the Cisco IPICS RMS Component APPENDIXA This appendix describes the configuration steps that you must follow to configure the RMS router for use with the Cisco IPICS server. The Cisco IPICS

More information

L2TP IPsec Support for NAT and PAT Windows Clients

L2TP IPsec Support for NAT and PAT Windows Clients L2TP IPsec Support for NAT and PAT Windows Clients The L2TP IPsec Support for NAT and PAT Windows Clients feature allows mulitple Windows client to connect to an IPsec-enabled Cisco IOS Layer 2 Tunneling

More information

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR 4321/K9 [IOS

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR 4321/K9 [IOS IntelePeer SIP Trunking: Cisco Unified Communications Manager 11.5.1 with Cisco Unified Border Element (CUBE 11.5.0) on ISR 4321/K9 [IOS - 16.5.1b] using SIP October 6, 2017 Page 1 of 57 Table of Contents

More information

Integrated Voice and Data WAN on T1 E1 Interfaces

Integrated Voice and Data WAN on T1 E1 Interfaces Integrated Voice and Data WAN on T1 E1 Interfaces This chapter describes how to implement the Integrated Voice and Data WAN on T1/E1 Interfaces with the AIM-ATM-VOICE-30 Module feature. This card provides

More information

1-Port and 2-Port HWIC data/voice, 4-Port T1/E1 HWIC, and 8-Port T1/E1 Network Module

1-Port and 2-Port HWIC data/voice, 4-Port T1/E1 HWIC, and 8-Port T1/E1 Network Module 1-Port and 2-Port HWIC data/voice, 4-Port T1/E1 HWIC, and 8-Port T1/E1 Network Module Last Updated: August 18, 2011, This document describes the following Cisco products: Cisco 1-Port and 2-Port Channelized

More information

Lab 8.5.2: Troubleshooting Enterprise Networks 2

Lab 8.5.2: Troubleshooting Enterprise Networks 2 Lab 8.5.2: Troubleshooting Enterprise Networks 2 Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 192.168.10.1 255.255.255.0 N/A R1 Fa0/1 192.168.11.1 255.255.255.0

More information

Connecting Cisco Unified Communication Manager [v11.5.1] to CenturyLink IQ SIP Trunks via Cisco Unified Border Element v [IOS-XE 16.3.

Connecting Cisco Unified Communication Manager [v11.5.1] to CenturyLink IQ SIP Trunks via Cisco Unified Border Element v [IOS-XE 16.3. Connecting Cisco Unified Communication Manager [v11.5.1] to CenturyLink IQ SIP Trunks via Cisco Unified Border Element v11.5.2 [IOS-XE 16.3.2] May 3, 2017 Page 1 of 70 Table of Contents Introduction...

More information

Basic Router Configuration

Basic Router Configuration This section includes information about some basic router configuration, and contains the following sections: Default Configuration, on page 1 Configuring Global Parameters, on page 2 Configuring Gigabit

More information

Implementing Cisco IOS Unified Communications Part 2 (IIUC2) v 1.0

Implementing Cisco IOS Unified Communications Part 2 (IIUC2) v 1.0 Implementing Cisco IOS Unified Communications Part 2 (IIUC2) v 1.0 Global Knowledge Remote Labs Instructor Guide Guide Release 0.3 Copyright GLOBAL KNOWLEDGE Page 1 1. Contents 2. Introduction This guide

More information

Cisco Virtual Office: Easy VPN Deployment Guide

Cisco Virtual Office: Easy VPN Deployment Guide Cisco Virtual Office: Easy VPN Deployment Guide This guide provides detailed design and implementation information for deployment of Easy VPN in client mode with the Cisco Virtual Office. Please refer

More information

Cisco Unified CME Commands: M

Cisco Unified CME Commands: M Cisco Unified CME Commands: M mac-address (ephone), page 3 mac-address (voice-gateway), page 5 mailbox-selection (dial-peer), page 7 mailbox-selection (ephone-dn), page 9 max-calls-per-button, page 11

More information

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321/K9 [IOS 15.6(1)S] using SIP

Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321/K9 [IOS 15.6(1)S] using SIP BroadCloud SIP Trunking: Registering Trunk Application Note Cisco Unified Communications Manager 11.0.1 with Cisco Unified Border Element (CUBE 11.5.0) on ISR4321/K9 [IOS 15.6(1)S] using SIP July 2016

More information

Installation Guide Supplement Integrating with Cisco Voice and Unified Communications Updated for Cisco Unified Communications Manager 8.

Installation Guide Supplement Integrating with Cisco Voice and Unified Communications Updated for Cisco Unified Communications Manager 8. Installation Guide Supplement Integrating with Cisco Voice and Unified Communications Updated for Cisco Unified Communications Manager 8.03 November 4, 2010 This supplementary guide to the Open Text Fax

More information

Quick Note. Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016

Quick Note. Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016 Quick Note Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016 Contents 1 Introduction... 3 1.1 Outline... 3 1.2 Assumptions...

More information

CWA URL Redirect support on C891FW

CWA URL Redirect support on C891FW Introduction, page 1 Prerequisites for, page 2 Configuring, page 3 HTTP Proxy Configuration, page 8 Configuration Examples for, page 8 Important Notes, page 14 Additional References for, page 14 Feature

More information

Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3

Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3 Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3 Last Updated: November, 2013 Introduction This guide is designed to help you deploy and monitor new features introduced in the IOS

More information

Multilevel Precedence and Preemption

Multilevel Precedence and Preemption This document describes the (MLPP) service introduced in Cisco Unified Communications Manager Express 7.1 (Cisco Unified CME). Prerequisites for MLPP, page 1 Information About MLPP, page 1 Configure MLPP,

More information

Lab Configuring Switch Security Features (Solution) Topology

Lab Configuring Switch Security Features (Solution) Topology (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 172.16.99.1 255.255.255.0 N/A S1 VLAN 99 172.16.99.11 255.255.255.0 172.16.99.1 PC-A NIC

More information

ECMP Load Balancing. MPLS: Layer 3 VPNs Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series) 1

ECMP Load Balancing. MPLS: Layer 3 VPNs Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series) 1 Equal-cost multi-path routing (ECMP) is a routing strategy where next-hop packet forwarding to a single destination can occur over multiple "best paths" which tie for top place in routing metric calculations.

More information

CISCO SWITCH BEST PRACTICES GUIDE

CISCO SWITCH BEST PRACTICES GUIDE CISCO SWITCH BEST PRACTICES GUIDE Table of Contents (After Clicking Link Hit HOME to Return to TOC) 1) Add Hostname... 2 2) Add Username and Password... 2 3) Create Secret Password... 2 4) Encrypt Password...

More information

Music on Hold. Prerequisites for Music on Hold. Restrictions for Music on Hold

Music on Hold. Prerequisites for Music on Hold. Restrictions for Music on Hold Prerequisites for, page 1 Restrictions for, page 1 Information About, page 2 Configure, page 7 Feature Information for, page 27 Prerequisites for For Unified CME Release 11.6 and previous releases, phones

More information

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers This chapter describes the steps for enabling conferencing and transcoding support on Cisco IOS voice gateways in a Cisco Unified

More information

IP phones do not support multicast at 224.x.x.x addresses.

IP phones do not support multicast at 224.x.x.x addresses. Prerequisites for, on page 1 Restrictions for, on page 1 Information About, on page 2 Configure, on page 7 Feature Information for, on page 26 Prerequisites for For Unified CME Release 11.6 and previous

More information

Application Notes for Configuring SIP Trunking between Cincinnati Bell evantage and Avaya Aura Communication Manager Branch Issue 1.

Application Notes for Configuring SIP Trunking between Cincinnati Bell evantage and Avaya Aura Communication Manager Branch Issue 1. Avaya Solution & Interoperability Test Lab Application Notes for Configuring SIP Trunking between Cincinnati Bell evantage and Avaya Aura Communication Manager Branch Issue 1.0 Abstract These Application

More information

EarthLink Business SIP Trunking. Cisco CME IP PBX Customer Configuration Guide

EarthLink Business SIP Trunking. Cisco CME IP PBX Customer Configuration Guide EarthLink Business SIP Trunking Cisco CME IP PBX Customer Configuration Guide Publication History First Release: Version 1.0 August 30, 2011 CHANGE HISTORY Version Date Change Details Changed By 1.0 8/30/2011

More information

Genesys Application Note. Cisco Unified Border Element (CUBE) SBC With Genesys SIP Server. Document Version 1.0

Genesys Application Note. Cisco Unified Border Element (CUBE) SBC With Genesys SIP Server. Document Version 1.0 Genesys Application Note Cisco Unified Border Element (CUBE) SBC With Genesys SIP Server Document Version 1.0 The information contained herein is proprietary and confidential and cannot be disclosed or

More information

Configuring SIP MWI Features

Configuring SIP MWI Features This module describes message-waiting indication (MWI) in a SIP-enabled network. Finding Feature Information, on page 1 Prerequisites for SIP MWI, on page 1 Restrictions for SIP MWI, on page 2 Information

More information

Call Transfer and Forward

Call Transfer and Forward Information About, page 1 Configure ing, page 32 Configuration Examples for ing, page 77 Where to Go Next, page 86 Feature Information for ing, page 87 Information About Call Forward Call forward feature

More information

Configuring the System for the First Time

Configuring the System for the First Time Configuring the System for the First Time This chapter describes the initial configuration process and ongoing configuration tasks, and contains the following sections: Before You Start: Configuration

More information

Configuring Video Support

Configuring Video Support Configuring Video Support Last Updated: July 22, 2011 This chapter describes the video support in Cisco Unified Communications Manager Express (Cisco Unified CME). Finding Feature Information in This Module

More information

Configuring Phones to Make Basic Calls

Configuring Phones to Make Basic Calls This chapter describes how to configure Cisco Unified IP phones in Cisco Unified Communications Manager Express (Cisco Unified CME) so that you can make and receive basic calls. Caution The Interactive

More information

Lab Configuring and Verifying Standard IPv4 ACLs (Instructor Version Optional Lab)

Lab Configuring and Verifying Standard IPv4 ACLs (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Automatic Line Selection

Automatic Line Selection This chapter describes automatic line selection feature in Cisco Unified Communications Manager Express (Cisco Unified CME). Note This feature is applicable for SCCP phones only. For newer SIP phones (Cisco

More information

Implementing IS-IS Routing and DHCP Services in an IPv4 Network

Implementing IS-IS Routing and DHCP Services in an IPv4 Network The University of Akron IdeaExchange@UAkron Honors Research Projects The Dr. Gary B. and Pamela S. Williams Honors College Fall 2015 Implementing IS-IS Routing and DHCP Services in an IPv4 Network Laura

More information

Paging. Restrictions for Paging. Information About Paging. Audio Paging

Paging. Restrictions for Paging. Information About Paging. Audio Paging Restrictions for, page 1 Information About, page 1 Configure, page 4 Configuration Examples for, page 13 Where to Go Next, page 17 Feature Information for, page 17 Restrictions for is not supported on

More information

Lab Configuring IPv6 Static and Default Routes (Solution)

Lab Configuring IPv6 Static and Default Routes (Solution) (Solution) Topology Addressing Table Device Interface IPv6 Address / Prefix Length Default Gateway R1 G0/1 2001:DB8:ACAD:A::/64 eui-64 N/A S0/0/1 FC00::1/64 N/A R3 G0/1 2001:DB8:ACAD:B::/64 eui-64 N/A

More information

Command Reference: A through M

Command Reference: A through M Reference: A through M This chapter contains commands to configure and maintain Cisco Unified Survivable Remote Site Telephony (SRST) and Cisco Unified SIP SRST. The commands are presented in alphabetical

More information

IC 4.0 SIP INTEGRATION TO CISCO UNIFIED COMMUNICATIONS MANAGER 9.X INTEGRATION DOCUMENT. Version 4.07

IC 4.0 SIP INTEGRATION TO CISCO UNIFIED COMMUNICATIONS MANAGER 9.X INTEGRATION DOCUMENT. Version 4.07 IC 4.0 SIP INTEGRATION TO CISCO UNIFIED COMMUNICATIONS MANAGER 9.X Validated Integrations: CUCM 9.x with xic version 4.0 SU-2 (support included for all 4.0 SU s) CUCM 9.x with xic version 3.0 SU-15 (support

More information