NATIONAL_WATER_CONSERVATION#sh run Building configuration...

Size: px
Start display at page:

Download "NATIONAL_WATER_CONSERVATION#sh run Building configuration..."

Transcription

1 NATIONAL_WATER_CONSERVATION#sh run Building configuration... Current configuration : 6390 bytes Last configuration change at 13:01:34 UTC Tue Jul by kembo version 15.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption hostname NATIONAL_WATER_CONSERVATION boot-start-marker boot-end-marker logging buffered warnings enable secret 5 $1$2RXC$Ju5kao4CBW5RqGdL.vAmD/ no aaa new-model ip dhcp excluded-address ip dhcp pool National_Water_Conservation network default-router dns-server z\ ip domain name yourdomain.com ip name-server ip name-server ip cef no ipv6 cef multilink bundle-name authenticated cts logging verbose crypto pki trustpoint TP-self-signed enrollment selfsigned subject-name cn=ios-self-signed-certificate revocation-check none rsakeypair TP-self-signed

2 crypto pki certificate chain TP-self-signed certificate self-signed B A D0609 2A F70D F30 2D F532D 53656C66 2D E65642D D E 170D A17 0D A F302D F532D53 656C662D E 65642D D F 300D0609 2A F70D D AD0D 917D4D61 4A21CA07 E52C6437 DD6EC817 5C8C DEE A AF99292D DD096CD5 B2DF21C5 B9E540DC DC6DDDE0 9D7AC0AB 83FF268E 304E870F DC9E3ACC A75BB5AE 27B4B3B4 12F6B F4 209F45DB 55C5501B E7FEB8D B 7E4C0513 AC1B9551 B8FCF202 6C8D8C1C 417EAE1E CBF E83EE 8EAD A F D FF FF 301F D C9C 1D3390F0 D21C6F1A 08A2BA EC1C A1301D D0E C9C1D 3390F0D2 1C6F1A08 A2BA EC1CA1 300D0609 2A F70D C23F40 91EF7450 8C2385D2 33F20FA DBC 0E04AC85 0CB6AABD 67FC78D4 3D64A2B0 1F68B0D4 141AA B0 41D4FBB2 F74E095C 9D7DAB94 AA9CD2E8 52C535A3 EEBD63B5 67B3FA98 2CBB1CEE BB4ABA3A 0485C71A A34DDFAE 0C17CA51 23FFA759 01C40A6B 1B537D98 BD87F1AD B CAA97D54 D1ACA8 quit license udi pid CISCO1941/K9 sn FCZ1909C3CK redundancy interface Embedded-Service-Engine0/0 no ip address shutdown interface GigabitEthernet0/0 description INTERNET ip address ip nat outside ip virtual-reassembly in duplex auto speed auto interface GigabitEthernet0/1 description LAN ip address secondary ip address ip nat inside ip virtual-reassembly in duplex auto speed auto ip forward-protocol nd ip http server

3 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life requests ip nat inside source list 102 interface GigabitEthernet0/0 overload ip nat inside source static tcp ip nat inside source static tcp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static tcp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip nat inside source static tcp ip nat inside source static udp ip route ip access-list standard ADMIN-ACCESS permit permit permit permit permit permit permit

4 permit permit permit deny any log ip access-list standard SNMP permit permit deny any logging trap debugging logging host logging host access-list 102 permit ip any control-plane banner login ^CCC Cisco systems Accessskenya Group UNAUTHORISED ACCESS PROHIBITED ^C line con 0 line aux 0 line 2 no activation-character no exec transport preferred none transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 privilege level 15 password 7 060D0A2C4E41 transport input telnet line vty 5 15 privilege level 15 transport input telnet ssh scheduler allocate

5 end NATIONAL_WATER_CONSERVATION#

Lab Designing and Implementing a VLSM Addressing Scheme. Topology. Objectives. Background / Scenario

Lab Designing and Implementing a VLSM Addressing Scheme. Topology. Objectives. Background / Scenario CSNB214 Packet Tracer Lab Designing and Implementing a VLSM Addressing Scheme Topology Objectives Part 1: Examine Network Requirements Part 2: Design the VLSM Address Scheme Part 3: Cable and Configure

More information

Lab Configuring Dynamic and Static NAT (Solution)

Lab Configuring Dynamic and Static NAT (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway Gateway G0/1 192.168.1.1 255.255.255.0 N/A S0/0/1 209.165.201.18 255.255.255.252 N/A ISP S0/0/0 (DCE)

More information

Lab Configuring Dynamic and Static NAT (Instructor Version Optional Lab)

Lab Configuring Dynamic and Static NAT (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Lab Configuring Port Address Translation (PAT) (Instructor Version)

Lab Configuring Port Address Translation (PAT) (Instructor Version) (Instructor Version) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Objectives Device Interface IP Address Subnet Mask

More information

Basic Router Configuration using SDM

Basic Router Configuration using SDM Basic Router Configuration using SDM Document ID: 71305 Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Interface Configuration NAT Configuration Routing Configuration

More information

BẮT 10 GIAO THỨC (SNMP, HTTP, HTTPS, NETMEETING, NTP, TELNET, SSH, H323, SIP, DOMAIN )

BẮT 10 GIAO THỨC (SNMP, HTTP, HTTPS, NETMEETING, NTP, TELNET, SSH, H323, SIP, DOMAIN ) SƠ ĐỒ MẠNG VISIO SƠ ĐỒ GNS3 BẮT 10 GIAO THỨC (SNMP, HTTP, HTTPS, NETMEETING, NTP, TELNET, SSH, H323, SIP, DOMAIN ) PING TẠO RA LƯU LƯỢNG SAU KHI CẤM PING FILE CẤU HÌNH CÁC ROUTER ROUTER SAIGON Last configuration

More information

Lab Configuring Basic RIPv2 (Solution)

Lab Configuring Basic RIPv2 (Solution) (Solution) Topology 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 15 Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway

More information

Lab Troubleshooting IPv4 and IPv6 Static Routes (Instructor Version Optional Lab)

Lab Troubleshooting IPv4 and IPv6 Static Routes (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

CONFIGURATION DU SWITCH

CONFIGURATION DU SWITCH Current configuration : 2037 bytes version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption hostname Switch no aaa new-model ip subnet-zero

More information

Lab - Configuring Basic DHCPv4 on a Router (Solution)

Lab - Configuring Basic DHCPv4 on a Router (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.0.1 255.255.255.0 N/A G0/1 192.168.1.1 255.255.255.0 N/A S0/0/0 (DCE) 192.168.2.253

More information

Configuring EtherChannel

Configuring EtherChannel L4 Configuring EtherChannel Global Knowledge Training LLC L4-1 Objectives In this lab you will first verify that one of the parallel connections to the core switch is blocked by STP. You will then configure

More information

Contents. Introduction. Prerequisites Components Used. Introduction. Prerequisites Components Used

Contents. Introduction. Prerequisites Components Used. Introduction. Prerequisites Components Used Contents Introduction Prerequisites Components Used Install Cisco Configuration Professional Router Configuration to Run Cisco CP Requirements Conventions Configure Network Diagram Interface Configuration

More information

Lab Configuring IPv4 Static and Default Routes (Solution)

Lab Configuring IPv4 Static and Default Routes (Solution) (Solution) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.0.1 255.255.255.0 N/A S0/0/1 10.1.1.1 255.255.255.252 N/A R3 G0/1 192.168.1.1 255.255.255.0

More information

Lab Configuring Switch Security Features (Solution) Topology

Lab Configuring Switch Security Features (Solution) Topology (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 172.16.99.1 255.255.255.0 N/A S1 VLAN 99 172.16.99.11 255.255.255.0 172.16.99.1 PC-A NIC

More information

Troubleshooting VLANs and Trunks

Troubleshooting VLANs and Trunks L2 Troubleshooting VLANs and Trunks Global Knowledge Training LLC L2-1 Objectives In this lab you will download configuration files into PxSW s running configuration to introduce VLAN and trunking issues

More information

Lab Configuring Per-Interface Inter-VLAN Routing (Solution)

Lab Configuring Per-Interface Inter-VLAN Routing (Solution) (Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.20.1 255.255.255.0 N/A G0/1 192.168.10.1 255.255.255.0 N/A S1 VLAN 10 192.168.10.11

More information

Lab Configuring Per-Interface Inter-VLAN Routing (Instructor Version)

Lab Configuring Per-Interface Inter-VLAN Routing (Instructor Version) (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Objectives Device Interface IP Address Subnet Mask

More information

Lab Configuring 802.1Q Trunk-Based Inter-VLAN Routing (Instructor Version Optional Lab)

Lab Configuring 802.1Q Trunk-Based Inter-VLAN Routing (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Lab Configuring Basic Router Settings with IOS CLI (Instructor Version Optional Lab)

Lab Configuring Basic Router Settings with IOS CLI (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Advanced IPv6 Training Course. Lab Manual. v1.3 Page 1

Advanced IPv6 Training Course. Lab Manual. v1.3 Page 1 Advanced IPv6 Training Course Lab Manual v1.3 Page 1 Network Diagram AS66 AS99 10.X.0.1/30 2001:ffXX:0:01::a/127 E0/0 R 1 E1/0 172.X.255.1 2001:ffXX::1/128 172.16.0.X/24 2001:ff69::X/64 E0/1 10.X.0.5/30

More information

Configure IOS-XE to display full show running-config for users with low Privilege Levels

Configure IOS-XE to display full show running-config for users with low Privilege Levels Configure IOS-XE to display full show running-config for users with low Privilege Levels Contents Introduction Prerequisites Requirements Components Used Configuration Problem Configuration Solution and

More information

How to configure MB5000 Serial Port Bridge mode

How to configure MB5000 Serial Port Bridge mode How to configure MB5000 Serial Port Bridge mode MB5000 has a configurable serial port. With this serial port, MB5000 can be used as DCE device to be connected with Cisco router s console port so that MB5000

More information

IEEE 802.1Q Tunneling (QnQ) and L2PT on L2 Ports

IEEE 802.1Q Tunneling (QnQ) and L2PT on L2 Ports Revised: November 11, 2011, OL-20468-01 First Published: November 11, 2011 Last Updated: November 11, 2011 This feature provides Layer 2 Tunneling support for QnQ and Layer 2 Protocol Tunneling (L2PT)

More information

Взято и поправлено: w_threaded

Взято и поправлено:  w_threaded Взято и поправлено: http://www.gossamer-threads.com/lists/cisco/voip/153604?do=post_vie w_threaded Данная конфигурация представлена для работы с встроенным модулем голосовой почты, МОН и конференцией Прошу

More information

Implementing EIGRP. Global Knowledge Training LLC L7-1

Implementing EIGRP. Global Knowledge Training LLC L7-1 L7 Implementing EIGRP Global Knowledge Training LLC L7-1 Objectives In this lab you will configure EIGRP on your pod routers. The core router is already configured for EIGRP. You will first remove the

More information

Lab 8.5.2: Troubleshooting Enterprise Networks 2

Lab 8.5.2: Troubleshooting Enterprise Networks 2 Lab 8.5.2: Troubleshooting Enterprise Networks 2 Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 192.168.10.1 255.255.255.0 N/A R1 Fa0/1 192.168.11.1 255.255.255.0

More information

Multicast Music-on-Hold Support on Cisco UBE

Multicast Music-on-Hold Support on Cisco UBE First Published: July 22, 2011 Last Updated: July 22, 2011 The Multicast Music-on-Hold (MMOH) feature enables you to subscribe to a music streaming service when you are using a Cisco Unified Border Element.

More information

Quick Note. Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016

Quick Note. Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016 Quick Note Configure an IPSec VPN tunnel in Aggressive mode between a TransPort LR router and a Cisco router. Digi Technical Support 7 October 2016 Contents 1 Introduction... 3 1.1 Outline... 3 1.2 Assumptions...

More information

Lab Configuring and Verifying Standard IPv4 ACLs (Instructor Version Optional Lab)

Lab Configuring and Verifying Standard IPv4 ACLs (Instructor Version Optional Lab) (Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or

More information

Lab Configuring IPv6 Static and Default Routes (Solution)

Lab Configuring IPv6 Static and Default Routes (Solution) (Solution) Topology Addressing Table Device Interface IPv6 Address / Prefix Length Default Gateway R1 G0/1 2001:DB8:ACAD:A::/64 eui-64 N/A S0/0/1 FC00::1/64 N/A R3 G0/1 2001:DB8:ACAD:B::/64 eui-64 N/A

More information

RSA SecurID Authentication for AnyConnect Clients on a Cisco IOS Headend Configuration Example

RSA SecurID Authentication for AnyConnect Clients on a Cisco IOS Headend Configuration Example RSA SecurID Authentication for AnyConnect Clients on a Cisco IOS Headend Configuration Example Document ID: 118778 Contributed by Atri Basu, Cisco TAC Engineer, and Vasavi Yellampalli, Cisco Engineering.

More information

IOS Router : Easy VPN (EzVPN) in Network Extension Mode (NEM) with Split tunnelling Configuration Example

IOS Router : Easy VPN (EzVPN) in Network Extension Mode (NEM) with Split tunnelling Configuration Example IOS Router : Easy VPN (EzVPN) in Network Extension Mode (NEM) with Split tunnelling Configuration Example Document ID: 63098 Contents Introduction Prerequisites Requirements Components Used Conventions

More information

Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3

Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3 Converged Access CT 5760 AVC Deployment Guide, Cisco IOS XE Release 3.3 Last Updated: November, 2013 Introduction This guide is designed to help you deploy and monitor new features introduced in the IOS

More information

External Web Authentication on Converged Access

External Web Authentication on Converged Access External Web Authentication on Converged Access The configuration procedure for the External Web Authentication on Converged Access is similar to the configuration procedure of Local Web Authentication

More information

RR> RR> RR>en RR# RR# RR# RR# *Oct 2 04:57:03.684: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/2 TDR=0, TRC=0 RR#

RR> RR> RR>en RR# RR# RR# RR# *Oct 2 04:57:03.684: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/2 TDR=0, TRC=0 RR# RR> RR> RR>en *Oct 2 04:57:03.684: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/2 TDR=0, TRC=0 term len 0 show run Building configuration... Current configuration : 2568 bytes version 15.4 service timestamps debug

More information

Design and Implementation Plan for Network Based on the ALOHA Point of Sale System. Proposed by Jedadiah Casey. Introduction

Design and Implementation Plan for Network Based on the ALOHA Point of Sale System. Proposed by Jedadiah Casey. Introduction Design and Implementation Plan for Network Based on the ALOHA Point of Sale System Proposed by Jedadiah Casey Introduction The goal of this design document is to provide a framework of suggested implementation

More information

Virtual private network setup

Virtual private network setup Virtual private network setup This chapter provides information about virtual private network setup. Virtual private network, page 1 Devices supporting VPN, page 2 Set up VPN feature, page 2 Complete IOS

More information

Virtual Private Network Setup

Virtual Private Network Setup This chapter provides information about virtual private network setup. Virtual Private Network, page 1 Devices Supporting VPN, page 2 Set Up VPN Feature, page 2 Complete Cisco IOS Prerequisites, page 3

More information

Secure ACS Database Replication Configuration Example

Secure ACS Database Replication Configuration Example Secure ACS Database Replication Configuration Example Document ID: 71320 Introduction Prerequisites Requirements Components Used Related Products Conventions Background Information Scenario I Scenario

More information

co Configuring PIX to Router Dynamic to Static IPSec with

co Configuring PIX to Router Dynamic to Static IPSec with co Configuring PIX to Router Dynamic to Static IPSec with Table of Contents Configuring PIX to Router Dynamic to Static IPSec with NAT...1 Introduction...1 Configure...1 Components Used...1 Network Diagram...1

More information

Cisco Small Business Pro. Technical Enablement Labs

Cisco Small Business Pro. Technical Enablement Labs Cisco Small Business Pro Smart Business Communication System Technical Enablement Labs Lab 15 Cisco SR 520-T1 Secure Router (can be head end Security Router for a UC 500) INTRODUCTION... 3 PREPARING FOR

More information

CWA URL Redirect support on C891FW

CWA URL Redirect support on C891FW Introduction, page 1 Prerequisites for, page 2 Configuring, page 3 HTTP Proxy Configuration, page 8 Configuration Examples for, page 8 Important Notes, page 14 Additional References for, page 14 Feature

More information

Basic Router Configuration

Basic Router Configuration This section includes information about some basic router configuration, and contains the following sections: Default Configuration, on page 1 Configuring Global Parameters, on page 2 Configuring Gigabit

More information

Note that you can also use the password command but the secret command gives you a better encryption algorithm.

Note that you can also use the password command but the secret command gives you a better encryption algorithm. Router Device Security Lab Configuring Secure Passwords 1. Configure the enable secret and password enable password TRUSTME enable secret letmein Look at the configuration: show config terminal Note the

More information

Loading Internet Protocol Security (IPSec) (CDR-882/780/790/990 Cellular Router)

Loading Internet Protocol Security (IPSec) (CDR-882/780/790/990 Cellular Router) Loading Internet Protocol Security (IPSec) (CDR-882/780/790/990 Cellular Router) Call Direct Document version 1.4 Last updated 17 December, 2010 support@call-direct.com.au Loading IPSec To support IPSec

More information

ECMP Load Balancing. MPLS: Layer 3 VPNs Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series) 1

ECMP Load Balancing. MPLS: Layer 3 VPNs Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series) 1 Equal-cost multi-path routing (ECMP) is a routing strategy where next-hop packet forwarding to a single destination can occur over multiple "best paths" which tie for top place in routing metric calculations.

More information

PIX/ASA 7.x and Later : Easy VPN with Split Tunneling ASA 5500 as the Server and Cisco 871 as the Easy VPN Remote Configuration Example

PIX/ASA 7.x and Later : Easy VPN with Split Tunneling ASA 5500 as the Server and Cisco 871 as the Easy VPN Remote Configuration Example PIX/ASA 7.x and Later : Easy VPN with Split Tunneling ASA 5500 as the Server and Cisco 871 as the Easy VPN Remote Configuration Example Document ID: 68815 Contents Introduction Prerequisites Requirements

More information

SSG Configuration Example

SSG Configuration Example APPENDIX A Example A-1 is a sample SSG configuration for the Cisco 10000 series router based on the topology in Figure A-1. The configuration includes AAA, PPP, SSG, and RADIUS. The SSG configuration enables

More information

L2TP IPsec Support for NAT and PAT Windows Clients

L2TP IPsec Support for NAT and PAT Windows Clients L2TP IPsec Support for NAT and PAT Windows Clients The L2TP IPsec Support for NAT and PAT Windows Clients feature allows mulitple Windows client to connect to an IPsec-enabled Cisco IOS Layer 2 Tunneling

More information

Lab - Configuring a Switch Management Address

Lab - Configuring a Switch Management Address Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 1 192.168.1.2 255.255.255.0 N/A PC-A NIC 192.168.1.10 255.255.255.0 N/A Part 1: Configure a Basic Network

More information

Cisco Virtual Office: Easy VPN Deployment Guide

Cisco Virtual Office: Easy VPN Deployment Guide Cisco Virtual Office: Easy VPN Deployment Guide This guide provides detailed design and implementation information for deployment of Easy VPN in client mode with the Cisco Virtual Office. Please refer

More information

Chapter 6 Lab 6-3, Gateway Load Balancing Protocol (GLBP) INSTRUCTOR VERSION

Chapter 6 Lab 6-3, Gateway Load Balancing Protocol (GLBP) INSTRUCTOR VERSION CCNPv7.1 SWITCH Chapter 6 Lab 6-3, Gateway Load Balancing Protocol (GLBP) INSTRUCTOR VERSION Topology Objectives Configure trunking, VTP, and inter-vlan routing using router-on-a stick Configure GLBP Configure

More information

Network security session 9-2 Router Security. Network II

Network security session 9-2 Router Security. Network II Network security session 9-2 Router Security Network II Router security First line of defense of the network Compromise of a router can lead to many issues: Denial of network services Degrading of network

More information

Configuration Professional: Site to Site IPsec VPN Between Two IOS Routers Configuration Example

Configuration Professional: Site to Site IPsec VPN Between Two IOS Routers Configuration Example Configuration Professional: Site to Site IPsec VPN Between Two IOS Routers Configuration Example Document ID: 113337 Contents Introduction Prerequisites Requirements Components Used Conventions Configuration

More information

Three interface Router without NAT Cisco IOS Firewall Configuration

Three interface Router without NAT Cisco IOS Firewall Configuration Three interface Router without NAT Cisco IOS Firewall Configuration Document ID: 13893 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Configurations

More information

CISCO SWITCH BEST PRACTICES GUIDE

CISCO SWITCH BEST PRACTICES GUIDE CISCO SWITCH BEST PRACTICES GUIDE Table of Contents (After Clicking Link Hit HOME to Return to TOC) 1) Add Hostname... 2 2) Add Username and Password... 2 3) Create Secret Password... 2 4) Encrypt Password...

More information

Implementing IS-IS Routing and DHCP Services in an IPv4 Network

Implementing IS-IS Routing and DHCP Services in an IPv4 Network The University of Akron IdeaExchange@UAkron Honors Research Projects The Dr. Gary B. and Pamela S. Williams Honors College Fall 2015 Implementing IS-IS Routing and DHCP Services in an IPv4 Network Laura

More information

Deployment of Cisco IP Mobility Solution on Enterprise Class Teleworker Network

Deployment of Cisco IP Mobility Solution on Enterprise Class Teleworker Network Deployment Guide Deployment of Cisco IP Mobility Solution on Enterprise Class Teleworker Network The Cisco Service Oriented Network Architecture (SONA) framework helps enterprise customers evolve their

More information

Lab 7 Configuring Basic Router Settings with IOS CLI

Lab 7 Configuring Basic Router Settings with IOS CLI Lab 7 Configuring Basic Router Settings with IOS CLI Objectives Part 1: Set Up the Topology and Initialize Devices Cable equipment to match the network topology. Initialize and restart the router and switch.

More information

Sample Business Ready Branch Configuration Listings

Sample Business Ready Branch Configuration Listings APPENDIX A Sample Business Ready Branch Configuration Listings The following is a sample configuration of a Business Ready Branch. There are many permutations of feature combinations when setting up the

More information

EHWIC-4SHDSL-EA module Fixed ISR G2 routers like C888EA-K9 work in both CO and CPE modes with Cisco IOS Software 15.2(2)T2 and later releases.

EHWIC-4SHDSL-EA module Fixed ISR G2 routers like C888EA-K9 work in both CO and CPE modes with Cisco IOS Software 15.2(2)T2 and later releases. Contents Introduction Prerequisites Requirements Components Used Configure Configurations ATM mode EFM mode Introduction This document describes configuration steps required to implement a back-to-back

More information

Support for policy-based routing applies to the Barracuda Web Security Gateway running version 6.x only.

Support for policy-based routing applies to the Barracuda Web Security Gateway running version 6.x only. Support for policy-based routing applies to the Barracuda Web Security Gateway running version 6.x only. Transparently Routing Web Traffic to the Barracuda Web Security Gateway This article demonstrates

More information

Configuring IOS to IOS IPSec Using AES Encryption

Configuring IOS to IOS IPSec Using AES Encryption Configuring IOS to IOS IPSec Using AES Encryption Document ID: 43069 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Configurations Verify Troubleshoot Troubleshooting

More information

Configuring a Terminal/Comm Server

Configuring a Terminal/Comm Server Configuring a Terminal/Comm Server Document ID: 5466 Introduction Prerequisites Requirements Components Used Conventions Cabling Design Strategy Configure Network Diagram Configurations Command Summary

More information

EarthLink Business SIP Trunking. Cisco CUCM 10.5 with CUBE Customer Configuration Guide

EarthLink Business SIP Trunking. Cisco CUCM 10.5 with CUBE Customer Configuration Guide m EarthLink Business SIP Trunking Cisco CUCM 10.5 with CUBE Customer Configuration Guide Publication History First Release: Version 1.0 August 30, 2011 CHANGE HISTORY Version Date Change Details Changed

More information

Router Allows VPN Clients to Connect IPsec and Internet Using Split Tunneling Configuration Example

Router Allows VPN Clients to Connect IPsec and Internet Using Split Tunneling Configuration Example Router Allows VPN Clients to Connect IPsec and Internet Using Split Tunneling Configuration Example Document ID: 91193 Contents Introduction Prerequisites Requirements Components Used Conventions Background

More information

Chapter 10 Lab 10-2, Securing VLANs INSTRUCTOR VERSION

Chapter 10 Lab 10-2, Securing VLANs INSTRUCTOR VERSION CCNPv7.1 SWITCH Chapter 10 Lab 10-2, Securing VLANs INSTRUCTOR VERSION Topology Objectives Background Secure the server farm using private VLANs. Secure the staff VLAN from the student VLAN. Secure the

More information

Cisco Network Academy CCNA 1 Introduction to Networks

Cisco Network Academy CCNA 1 Introduction to Networks Cisco Network Academy CCNA 1 Introduction to Networks Packet Tracer Practice with Dans Sample http://www.danscourses.com/ In this lab, you will learn how to configure the following tasks: IPv4 Addressing

More information

Cox SIP Trunking: Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE 3.

Cox SIP Trunking: Cisco Unified Communications Manager with Cisco Unified Border Element (CUBE ) on ISR4321 [IOS-XE 3. Application Note Cox SIP Trunking: Cisco Unified Communications Manager 11.0.1 with Cisco Unified Border Element (CUBE 11.5.0) on ISR4321 [IOS-XE 3.17] using SIP April 2017 Page 1 of 86 Table of Contents

More information

ภาคผนวก ก Coding VPN IPSec Site-to-Site

ภาคผนวก ก Coding VPN IPSec Site-to-Site ภาคผนวก 30 ภาคผนวก ก Coding VPN IPSec Site-to-Site Router HQ (R-HQ) hostname R-HQ ip dhcp excluded-address 172.16.100.1 172.16.100.99 ip dhcp excluded-address 172.16.100.200 172.16.100.254 ip dhcp excluded-address

More information

IPsec Anti-Replay Window Expanding and Disabling

IPsec Anti-Replay Window Expanding and Disabling IPsec Anti-Replay Window Expanding and Disabling Cisco IP security (IPsec) authentication provides anti-replay protection against an attacker duplicating encrypted packets by assigning a unique sequence

More information

Configuring the SM-1-STM1

Configuring the SM-1-STM1 4 CHAPTER To continue your SM-1-STM1 service module installation, you must configure the STM-1 interface. This chapter contains the following sections: Configuring the Interface, page 4-1 Checking the

More information

VPN Connection through Zone based Firewall Router Configuration Example

VPN Connection through Zone based Firewall Router Configuration Example VPN Connection through Zone based Firewall Router Configuration Example Document ID: 112051 Contents Introduction Prerequisites Requirements Components Used Conventions Background Information Configure

More information

Configuring Secure Socket Layer HTTP

Configuring Secure Socket Layer HTTP Finding Feature Information, page 1 Information about Secure Sockets Layer (SSL) HTTP, page 1 How to Configure Secure HTTP Servers and Clients, page 4 Monitoring Secure HTTP Server and Client Status, page

More information

IPsec Anti-Replay Window: Expanding and Disabling

IPsec Anti-Replay Window: Expanding and Disabling IPsec Anti-Replay Window: Expanding and Disabling First Published: February 28, 2005 Last Updated: March 24, 2011 Cisco IP security (IPsec) authentication provides anti-replay protection against an attacker

More information

Examples of Cisco APE Scenarios

Examples of Cisco APE Scenarios CHAPTER 5 This chapter describes three example scenarios with which to use Cisco APE: Access to Asynchronous Lines, page 5-1 Cisco IOS Shell, page 5-3 Command Authorization, page 5-5 Note For intructions

More information

!! Configuration of RFS4000 version R!! version 2.3!! ip access-list BROADCAST-MULTICAST-CONTROL permit tcp any any rule-precedence 10

!! Configuration of RFS4000 version R!! version 2.3!! ip access-list BROADCAST-MULTICAST-CONTROL permit tcp any any rule-precedence 10 Configuration of RFS4000 version 5.5.1.0-017R version 2.3 ip access-list BROADCAST-MULTICAST-CONTROL permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic" permit udp any eq 67

More information

!! Last configuration change at 16:04:19 UTC Tue Feb by zdrillin! NVRAM config last updated at 21:07:18 UTC Thu Feb ! version 12.

!! Last configuration change at 16:04:19 UTC Tue Feb by zdrillin! NVRAM config last updated at 21:07:18 UTC Thu Feb ! version 12. Last configuration change at 16:04:19 UTC Tue Feb 15 2011 by zdrillin NVRAM config last updated at 21:07:18 UTC Thu Feb 10 2011 version 12.2 no service pad service timestamps debug datetime msec service

More information

Chapter 5 Lab 5-2 DHCP INSTRUCTOR VERSION

Chapter 5 Lab 5-2 DHCP INSTRUCTOR VERSION CCNPv7.1 SWITCH Chapter 5 Lab 5-2 DHCP INSTRUCTOR VERSION Topology Objectives Configure DHCP for IPv4 Configure Stateless DHCP for IPv6 Configure Stateful DHCP for IPv6 Background To practice the various

More information

Configurations. Express Setup. Stratix 8000 APPENDIX

Configurations. Express Setup. Stratix 8000 APPENDIX APPENDIX D Express Setup Stratix 8000 The following is a sample of a Stratix 8000 configuration after running Express Setup. The Stratix 8000 was running Release 3 (IOS version 12.2(50)SE2). version 12.2

More information

Configuration du laboratoire par accès téléphonique (San Jose, États-Unis)

Configuration du laboratoire par accès téléphonique (San Jose, États-Unis) Configuration du laboratoire par accès téléphonique (San Jose, États-Unis) Contenu Introduction Conditions préalables Conditions requises Composants utilisés Conventions Configuration Informations connexes

More information

Participatory Networking. Andrew Ferguson, Arjun Guha, Jordan Place, Rodrigo Fonseca, and Shriram Krishnamurthi

Participatory Networking. Andrew Ferguson, Arjun Guha, Jordan Place, Rodrigo Fonseca, and Shriram Krishnamurthi Participatory Networking Andrew Ferguson, Arjun Guha, Jordan Place, Rodrigo Fonseca, and Shriram Krishnamurthi 1 The Problem with Networks 2 1. in the home The Problem with Networks 2 1. in the home 2.

More information

Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall

Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall Document ID: 43068 Contents Introduction Prerequisites Requirements Components Used Conventions Configure

More information

Configuring Certificate Enrollment for a PKI

Configuring Certificate Enrollment for a PKI Configuring Certificate Enrollment for a PKI First Published: May 2, 2005 Last Updated: July 31, 2009 Certificate enrollment, which is the process of obtaining a certificate from a certification authority

More information

Configuring Secure Socket Layer HTTP

Configuring Secure Socket Layer HTTP Finding Feature Information, page 1 Information about Secure Sockets Layer (SSL) HTTP, page 1 How to Configure Secure HTTP Servers and Clients, page 5 Monitoring Secure HTTP Server and Client Status, page

More information

Device Interface IP Address Subnet Mask Default Gateway. Ports Assignment Network

Device Interface IP Address Subnet Mask Default Gateway. Ports Assignment Network Felix Rohrer Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 172.17.99.11 255.255.255.0 N/A S2 VLAN 99 172.17.99.12 255.255.255.0 N/A S3 VLAN 99 172.17.99.13

More information

How to Configure a Cisco Router Behind a Non-Cisco Cable Modem

How to Configure a Cisco Router Behind a Non-Cisco Cable Modem How to Configure a Cisco Router Behind a Non-Cisco Cable Modem Document ID: 19268 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Configurations Verify

More information

Configure the ASA for Dual Internal Networks

Configure the ASA for Dual Internal Networks Configure the ASA for Dual Internal Networks Document ID: 119195 Contributed by Dinkar Sharma, Bratin Saha, and Prashant Joshi, Cisco TAC Engineers. Aug 05, 2015 Contents Introduction Prerequisites Requirements

More information

ASA with WebVPN and Single Sign-on using ASDM and NTLMv1 Configuration Example

ASA with WebVPN and Single Sign-on using ASDM and NTLMv1 Configuration Example ASA with WebVPN and Single Sign-on using ASDM and NTLMv1 Configuration Example Contents Introduction Prerequisites Requirements Components Used Conventions Configure Add an AAA Server for Windows Domain

More information

AutoSecure. Finding Feature Information. Last Updated: January 18, 2012

AutoSecure. Finding Feature Information. Last Updated: January 18, 2012 AutoSecure Last Updated: January 18, 2012 The AutoSecure feature secures a router by using a single CLI command to disable common IP services that can be exploited for network attacks, enable IP services

More information

Configuring Secure Socket Layer HTTP

Configuring Secure Socket Layer HTTP This feature provides Secure Socket Layer (SSL) version 3.0 support for the HTTP 1.1 server and HTTP 1.1 client within Cisco IOS software. SSL provides server authentication, encryption, and message integrity

More information

MWA Deployment Guide. VPN Termination from Smartphone to Cisco ISR G2 Router

MWA Deployment Guide. VPN Termination from Smartphone to Cisco ISR G2 Router MWA Deployment Guide Mobile Workforce Architecture: VPN Deployment Guide for Microsoft Windows Mobile and Android Devices with Cisco Integrated Services Router Generation 2 This deployment guide explains

More information

Configuración del laboratorio de acceso telefónico de clientes (San José, Estados Unidos)

Configuración del laboratorio de acceso telefónico de clientes (San José, Estados Unidos) Configuración del laboratorio de acceso telefónico de clientes (San José, Estados Unidos) Contenido Introducción prerrequisitos Requisitos Componentes Utilizados Convenciones Configuración Información

More information

Configuração do laboratório de discagem de entrada de cliente (SÃO JOSÉ, USA)

Configuração do laboratório de discagem de entrada de cliente (SÃO JOSÉ, USA) Configuração do laboratório de discagem de entrada de cliente (SÃO JOSÉ, USA) Índice Introdução Pré-requisitos Requisitos Componentes Utilizados Convenções Configuração Informações Relacionadas Introdução

More information

Workgroup Bridges with PEAP Authentication Configuration Example

Workgroup Bridges with PEAP Authentication Configuration Example Workgroup Bridges with PEAP Authentication Configuration Example Document ID: 115736 Contributed by Surendra BG, Jeal Jimenez, and Carlos Leiton, Cisco TAC Engineers. Jan 14, 2013 Contents Introduction

More information

when interoperating with a Cisco Layer 3 Switch Situation: VLAN 1 shutdown, no IP on default VLAN on Cisco switch

when interoperating with a Cisco Layer 3 Switch Situation: VLAN 1 shutdown, no IP on default VLAN on Cisco switch CONFIGURING VLANS ON MNS-6K AND MNS-6K-SECURE when interoperating with a Cisco Layer 3 Switch Situation: VLAN 1 shutdown, no IP on default VLAN on Cisco switch A Technical Brief from GarrettCom, Inc.,

More information

Table of Contents. Cisco IPSec Tunnel through a PIX Firewall (Version 7.0) with NAT Configuration Example

Table of Contents. Cisco IPSec Tunnel through a PIX Firewall (Version 7.0) with NAT Configuration Example Table of Contents IPSec Tunnel through a PIX Firewall (Version 7.0) with NAT Configuration Example...1 Document ID: 63881...1 Introduction...1 Prerequisites...2 Requirements...2 Components Used...2 Conventions...2

More information

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1 Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. Router A Router B Router C Router D Network Next Hop Next Hop Next Hop Next

More information

config mode: Router> enable Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z.

config mode: Router> enable Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. CCNA1-CH2 2.1.1.1 OS / IOS 2.1.2.1 console (serial) / ssh / telnet 2.1.2.2 putty (teraterm / mobxterm / ) 2.1.3.1 IOS operation: console (cable + config) in packettracer 2.1.3.2 user EXEC vs Privileged

More information

Configuring Secure Socket Layer HTTP

Configuring Secure Socket Layer HTTP This feature provides Secure Socket Layer (SSL) version 3.0 support for the HTTP 1.1 server and HTTP 1.1 client within Cisco IOS software. SSL provides server authentication, encryption, and message integrity

More information