Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1
|
|
- Sheryl Rice
- 6 years ago
- Views:
Transcription
1 CHAPTER 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Cisco Prime Health and Utilization Monitor (HUM) is a Simple Network Management Protocol (SNMP) based MIB polling application that monitors network elements (such as CPU, memory, interfaces/ports, and links) for their availability and utilization levels and provides historical reporting. This chapter provides mapping of HUM tasks in Cisco Prime LMS 4.1. It explains: Poller and Template Management Tasks Threshold and TrendWatch Tasks Reports Tasks Administration Tasks Poller and Template Management Tasks This section provides information on the following HUM tasks in LMS : Poller Management Tasks Template Management Tasks 6-1
2 Threshold and TrendWatch Tasks Chapter 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Table 6-1 Poller and Template Management Tasks Poller Management Tasks Managing Pollers Poller and Template Management > Poller Management Template Management Tasks Managing Templates Poller and Template Management > Template Management Monitor > Performance Settings: Setup > Pollers Monitor > Performance Settings: Setup > Templates A Poller is a collection of devices and template MIB variables configured in LMS to monitor the utilization and availability levels of devices that are connected to the network. You can create a Poller, modify the configuration of a Poller, delete a Poller, Activate or De-activate a Poller, clear missed cycles and so on. Templates are a logical group of MIB variables that allow you to monitor the performance parameters of a device (such as CPU, memory, interface) for utilization and availability levels. You can create a user-defined template, modify the configuration of a user-defined template, export and import a user-defined template, delete a user-defined template, and so on. Threshold and TrendWatch Tasks This section provides information on the following HUM tasks in LMS 4.1: Threshold Setup Tasks TrendWatch Setup Tasks 6-2
3 Chapter 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Reports Tasks Table 6-2 Threshold and TrendWatch Tasks Threshold Setup Tasks Creating and Managing Thresholds TrendWatch Setup Tasks Creating and Managing TrendWatches Threshold Management > Threshold Setup TrendWatch Management > TrendWatch Setup Monitor > Threshold Settings: Performance Monitor > Threshold Settings: TrendWatch You can create a threshold for a MIB variable, modify the threshold set for a MIB variable and delete the threshold. You can create a TrendWatch for a MIB variable, based on a template or on a threshold. You can create, modify, delete, activate or de-activate a TrendWatch. Reports Tasks This section provides information on the following HUM tasks in LMS 4.1: Report Management Tasks Report Job Browser Tasks Table 6-3 Reports Tasks Report Management Tasks Viewing and Managing Reports Report Job Browser Tasks Accessing Report Job Browser Reports > Report Management Reports > Report Job Browser Reports > Performance: Device Or Reports > Faults and Events: Threshold Violation Admin > Jobs: Browser You create, view, schedule and manage the following reports: Device Reports Quick Reports Poller Reports Custom Reports Threshold Violation Reports TrendWatch Reports TrendWatch Summary Reports The Job browser allows you to view the list of report jobs scheduled to generate reports. 6-3
4 Administration Tasks Chapter 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Administration Tasks This section provides information on the following HUM administration tasks in LMS 4.1: Table 6-4 Administration Tasks Setting up the system preferences Admin > System Preferences Setting up log levels Log Level Settings Purging jobs Job Purge Seting up the report publish location Report Publish Path Purging data Data Purge View Purge Details Purge Details Configuring Poll Settings Poll Settings Admin > Network: Monitor/ Troubleshoot > Performance Admin Settings Admin > System: Debug Settings > Performance Debugging Settings Admin > Network: Purge Settings > Performance Job Purge Settings Reports > Report Settings: Report Publish Path Admin > Network: Purge Settings > Performance Data Purge Settings Admin > Network: Purge Settings > Performance Data Purge Summary Admin > Collection Settings: Performance > Performance Management SNMP Timeouts and Retry Settings Shows the current admin settings. Configure and manage log level settings. You can set log level modes (such as Fatal, Error, Info, Debug) either for all application modules or at a module level. You can configure LMS to periodically purge job data that you no longer need. LMS allows you to publish the PDF, HTML and CSV format of all the reports to a directory location of your choice. This is done by setting a default directory path. You can configure LMS to periodically purge polled data that you no longer need in the database. You can view the details of the data purged in LMS LMS allows you to configure the SNMP timeout and SNMP retries. The SNMP timeout and SNMP retries are based on the device and network response time. SNMP timeout is the duration of time that LMS waits for the device to respond before it tries to query the device again. SNMP retry is the maximum number of times LMS retries to query the device. 6-4
5 Chapter 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS 4.1 Administration Tasks Table 6-4 Administration Tasks (continued) Loading MIB files Load MIB Viewing Audit Trail Log Report Creating Trap Receiver Groups Creating a Syslog Receiver Group Audit Trail Logging Trap Receiver Groups Syslog Receiver Groups Admin > Network: Monitor/Troubleshoot > Load MIB Reports > Audit: Performance Monitor > Fault Settings: SNMP Traps > Receiving Or Admin > Network: Notification and Action Settings > Performance - SNMP Trap Notification Admin > Network: Notification and Action Settings > Performance - Syslog notification You can load a new MIB file into LMS using the Load MIB option. The new MIB file is compiled and stored in LMS. You can use the new MIB file to create new templates by grouping MIB variables. You can view the Audit Trail Logging report for all modules, categories and users. LMS allows you to create SNMP Trap Receiver Groups. This is a group of hosts that receives specified trap notifications, when any TrendWatch or Threshold violation occurs in LMS. LMS allows you to create Syslog Receiver Groups. Syslog Receiver Groups is a group of hosts that receives Syslog messages when any TrendWatch or Threshold violation occurs in HUM. 6-5
6 Administration Tasks Chapter 6 Navigating Cisco Prime Health and Utilization Monitor Tasks in LMS
Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.1
CHAPTER 7 Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.1 Cisco Prime Monitor (IPM) is a network troubleshooting application that gauges network response time and availability.
More informationAudit Reports. Change Audit Reports CHAPTER
CHAPTER 9 This chapter explains: Change Viewing System Audit Log Report Performance Generating a Inventory and Config Audit Trail Report Device Administration Reports and IPSLA Audit Report You can perform
More informationNavigating Cisco Prime Campus Manager Tasks in LMS 4.1
CHAPTER 4 Navigating Cisco Prime Campus Manager Tasks in LMS 4.1 CiscoWorsk Campus Manager (CM) is an integral component of Cisco Prime LAN Management Solution. As an enterprise solution for network management,
More informationUnderstanding LMS Tasks
CHAPTER 18 This section briefly describes all the LMS tasks. See the Online help for further details. This section explains the following LMS task groups: Understanding Admin Tasks Understanding Report
More informationAuditConfigurationArchiveandSoftwareManagementChanges (Network Audit)
This section contains the following topics: Audit Configuration Archive and Software Management Changes (Network Audit), on page 1 Audit Changes Made By Users (Change Audit), on page 1 Audit Actions Executed
More informationMonitoring Dashboard CHAPTER
CHAPTER 6 This chapter explains the list of default dashboards in (see List of Default Portlets in ) and the following portlets in the dashboard: N-Hop View High Severity Faults Syslog Summary Syslog Alerts
More informationUsing Homepage. Information About Homepage CHAPTER
CHAPTER 2 This section describes how to use Homepage, which is a launching point for quick access to selected areas within Cisco Application Networking Manager (ANM). This chapter includes the following
More informationPerformance Monitor Administrative Options
CHAPTER 12 Effective network management requires the fastest possible identification and resolution of events that occur on mission-critical systems. Performance Monitor administrative options enable you
More informationImplementing CiscoWorks LMS 4.0 (CWLMS)
Implementing CiscoWorks LMS 4.0 (CWLMS) Course Overview: Implementing CiscoWorks LMS (CWLMS) v4.0 teaches learners how to use CiscoWorks LAN Management Solution (LMS) 4.0 to manage their network. The focus
More informationFrequently Asked Questions About Performance Monitor
APPENDIXA Frequently Asked Questions About Performance Monitor The following topics answer common questions about Performance monitor and contain troubleshooting tips: Installation, page A-1 Importing,
More informationEvents and Audit Logs
About Events, page 1 Event Descriptions, page 2 Viewing Event Records, page 3 Log Retention Policies, page 5 About Events Note For detailed reference information about faults, events, errors, and system
More informationSNMP Agent Commands CHAPTER
CHAPTER 5 This chapter describes the command-line interface (CLI) commands that you can use to manage and monitor the SNMP agent on the Prime Cable Provisioning Device Provisioning Engine (DPE). The commands
More informationUnderstanding the Cisco Prime LMS Interface
CHAPTER 3 This chapter provides a brief description of the elements in the Cisco Prime LMS user interface. It explains: Understanding the Interface Elements Understanding the Sitemap Navigating Menus Adding
More informationAdministrative Tasks CHAPTER
15 CHAPTER This chapter describes administrative tasks to perform with WCS. These tasks include the following: Running Background Tasks, page 15-2 (such as database cleanup, location server synchronization,
More informationOverview of Inventory Management
CHAPTER 1 Inventory Management in Cisco Prime LAN Management 4.1 groups the various activities in LMS involved in managing your inventory: your network devices. You can access these features from the Inventory
More informationInventory Reports. Detailed Device Report CHAPTER
CHAPTER 2 include the following device reports. Detailed Device Report Device Attributes Reports Generating a 24-Hour Inventory Change Report Hardware Reports Management Status Reports Software Reports
More informationWhat s new in LMS 3.2?
What s new in LMS 3.2? 1 Agenda Objectives/Takeaways Executive Summary What s New in LMS 3.2? Top 10 Features Server Sizing For More Information 2 Objectives & Key Takeaways Objectives Understand what
More informationNNMi120 Network Node Manager i Software 10.x Essentials
Course Data Sheet NNMi120 Network Node Manager i Software 10.x Essentials Course No.: NNMI120-101 Category/Sub Category: Operations Management/Network Management For software version(s): Software version
More informationDevice Reachability. VNE Management Communication Policies and How To Change Them CHAPTER
CHAPTER 24 Prime Network VNEs communicate with network devices using the SNMP, Telnet, XML, ICMP, and HTTP protocols, and using notification protocols (traps and syslogs). To determine the reachability
More informationIntroducing the VNE Customization Builder (VCB)
17 CHAPTER This chapter introduces the Virtual Network Element Customization Builder (VCB) in Cisco Prime Network. Topics include: About the VCB, page 17-1 A Quick Tour of the VCB, page 17-2, page 17-4
More informationUsing Homepage. Information About Hompage CHAPTER
CHAPTER 2 This section describes how to use Homepage, which is a launching point for quick access to selected areas within Cisco Application Networking Manager (ANM). This chapter includes the following
More informationCisco Prime Collaboration Deployment Configuration and Administration
Cisco Prime Collaboration Deployment Configuration and Administration Services, page 1 Limitations and Restrictions, page 5 Services After the installation of the Cisco Prime Collaboration Deployment platform,
More informationCPU Thresholding Notification
CPU Thresholding Notification Last Updated: October 10, 2011 The CPU Thresholding Notification feature notifies users when a predefined threshold of CPU usage is crossed by generating a Simple Network
More informationSNMP Agent Commands CHAPTER
CHAPTER 5 This chapter describes the command-line interface (CLI) commands that you can use to manage and monitor the SNMP agent on the Cisco Broadband Access Center (Cisco BAC) Device Provisioning Engine
More informationData Collection and Background Tasks
This section contains the following topics: Control Data Collection Jobs, on page 1 How Data Retention Settings Affect Web GUI Data, on page 1 About Historical Data Retention, on page 2 Performance and
More informationSetting up. Discovering the Network. Planning Discovery Runs CHAPTER
CHAPTER 3 After you install Prime NCS (WAN) and launch the browser, read the following sections to learn how to get started using Prime NCS (WAN): Discovering the Network, page 3-1 Setting Up Site Profiles,
More informationPerforming Administrative Tasks
CHAPTER 6 This section provides information about administrative tasks. It includes these topics: Stopping and Restarting the Cisco License Manager Server, page 6-1 How to Manage Users, page 6-2 Working
More informationUser and System Administration
CHAPTER 5 This chapter provides information about performing user and system administration tasks in Cisco Prime Network Analysis Module 5.1and generating diagnostic information for obtaining technical
More informationTroubleshooting and FAQs in LMS Monitoring and Troubleshooting
CHAPTER 19 Troubleshooting and FAQs in LMS Monitoring and Troubleshooting This chapter provides you the following information for Cisco Prime LMS: Frequently Asked Questions Troubleshooting LMS Frequently
More informationUsing the Prime Performance Manager Web Interface
3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager
More informationCisco Prime Network Client Overview
CHAPTER 1 Cisco Prime Network (Prime Network) provides a suite of GUI tools that offer an intuitive interface for managing the network and services, and for performing required system administration activities.
More informationCisco Unified Service Statistics Manager 8.7
Deployment Guide Cisco Unified Service Statistics Manager 8.7 Deployment Best Practices For further information, questions and comments please contact ask-ucms@cisco.com 2012 Cisco and/or its affiliates.
More informationThis section contains context-sensitive Online Help content for the Web Client > Monitor tab.
This section contains context-sensitive Online Help content for the Web Client > tab. Viewing Switch CPU Information, page 2 Viewing Switch Memory Information, page 2 Viewing Switch Traffic and Errors
More informationGetting Started with Prime Network
CHAPTER 1 These topics provide some basic steps for getting started with Prime Network, such as how to set up the system and the basic parts of the Prime Network Administration GUI client. Basic Steps
More informationMonitoring. 18 Nov TM and copyright Imagicle spa
Monitoring 18 Nov 2018 TM and copyright 2010-2018 Imagicle spa Table of Contents Monitoring...1/3 Monitoring service configuration...1/3 Monitoring Monitoring service configuration The Application Suite
More informationehealth SPECTRUM Integration
User Guide May 2006 ehealth SPECTRUM Integration Whether you are a large enterprise or a service provider, your operations team faces a significant challenge maintaining critical service levels across
More informationConfiguring with the CMM Administration Tool
CHAPTER 2 System administrators can configure their network using the CMM Administration Tool. This chapter covers: Performing Domain Management, page 2-1 Using Administrative Utilities, page 2-1 Configuring
More informationConfiguring IP SLAs for Metro-Ethernet
This module describes how to configure an IP Service Level Agreements (SLAs) for Metro-Ethernet to gather network performance metrics in service-provider Ethernet networks. Available statistical measurements
More informationGetting Started with ehealth for Voice Cisco Unity & Unity Bridge
Focus on Setup Getting Started with ehealth for Voice Cisco Unity & Unity Bridge What s Inside About ehealth for Voice Cisco Unity. An overview of the product components. Requirements. Prerequisites for
More informationConfiguring IP SLAs for Metro-Ethernet
This module describes how to configure an IP Service Level Agreements (SLAs) for Metro-Ethernet to gather network performance metrics in service-provider Ethernet networks. Available statistical measurements
More informationConfiguring Embedded Resource Manager-MIB
The Embedded Resource Manager (ERM)-MIB feature introduces MIB support for the ERM feature. The ERM feature tracks resource usage information for every registered resource owner and resource user. The
More informationPerform Configuration Audits Using Compliance
How To Perform a Compliance Audit, page 1 Enable and Disable Compliance Auditing, page 2 Create a New Compliance Policy, page 2 Create Compliance Policy Rules, page 3 Create a Compliance Profile That Contains
More informationAdd and Organize Devices
This chapter contains the following topics: Add Devices to Prime Infrastructure, on page 1 Import Devices from Another Source, on page 7 Create Device Import CSV Files, on page 7 Add Devices Manually (New
More informationCisco UCS Monitoring Resource Handbook
Cisco UCS Monitoring Resource Handbook Authored by Eric Williams Jeff Foster Jason Shaw This document is intended to be a central repository of monitoring resources and recommendations for Cisco UCS Manager
More informationNetwork Performance Monitor
GETTING STARTED GUIDE Network Performance Monitor Version 12.4 Part 1 of 2: Get Started Last Updated: December 3, 2018 2018 SolarWinds Worldwide, LLC. All rights reserved. This document may not be reproduced
More informationBlackBerry Enterprise Server for Microsoft Office 365. Version: 1.0. Administration Guide
BlackBerry Enterprise Server for Microsoft Office 365 Version: 1.0 Administration Guide Published: 2013-01-29 SWD-20130131125552322 Contents 1 Related resources... 18 2 About BlackBerry Enterprise Server
More informationRequired Ports for Cisco Prime Collaboration
The following tables lists the required ports for the Cisco Prime Collaboration Assurance and Cisco Prime Collaboration Provisioning servers to communicate with the devices. Ports Used by Prime Collaboration
More informationSwitch Port Report. Switch Port Usage Reports CHAPTER
CHAPTER 3 You can generate the following Switch Port reports using, based on the status of the switch ports. Switch Port Usage Reports Port Reports Switch Port Utilization History Report Switch Port Usage
More informationCenterity Monitor User Guide
Centerity Monitor 4.10 User Guide July 2018 Page 2 End-User License Agreement (EULA) This guide and the use of Centerity software is subject to Centerity s End-User License Agreement (EULA). A copy of
More informationAccessing Data from the Web Interface
5 CHAPTER This chapter provides information about accessing Prime Performance Manager data from Prime Performance Manager web interface. This chapter contains: Supported Browsers, page 5-1 Accessing Prime
More informationSimple Network Management Protocol
This chapter gives an overview of (SNMP). Overview, page 1 SNMP Versioning, page 2 SNMP and Cisco Unified CM Basics, page 3 SNMP Limits, page 4 SNMP Basic Commands, page 4 SNMP Community Strings and Users,
More informationehealth SPECTRUM Integration
User Guide March 2007 ehealth SPECTRUM Integration Whether you are a large enterprise or a service provider, your operations team faces a significant challenge maintaining critical service levels across
More informationCisco Emergency Responder User Preparation
Overview, page 1 Emergency Responder Onsite Alert Personnel Preparations, page 1 Emergency Responder ERL Administrator Role, page 2 Emergency Responder Network Administrator Role, page 4 Emergency Responder
More informationSetting Up Essentials
CHAPTER 4 Setting Up Essentials Now that you have installed Essentials, you need to perform some required administrator tasks. This chapter consists of the following sections: Quick Reference Accessing
More informationConfiguring Communication Services
This chapter includes the following sections: Configuring HTTP, on page 1 Configuring SSH, on page 2 Configuring XML API, on page 3 Enabling Redfish, on page 3 Configuring IPMI, on page 4 Configuring SNMP,
More informationMemory Threshold Notifications
The feature allows you to reserve memory for critical notifications and to configure a router to issue notifications when available memory falls below a specified threshold. Finding Feature Information,
More informationNavigation Guide for Cisco Prime LAN Management Solution 4.1
Navigation Guide for Cisco Prime LAN Management Solution 4.1 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS
More informationNNMI140 - Network Node Manager i Software 9.x for Operators
NNMI140 - Network Node Manager i Software 9.x for Operators Instructor-Led Training For versions 9.0 & 9.10 OVERVIEW This 2-day course provides operational skills for the Network Node Manager i (NNMi)
More informationServices. Service descriptions. Cisco HCS services
Service descriptions, page 1 Infrastructure Platform Automation Description, page 5 Infrastructure Manager Sync Introduction, page 5 Service descriptions After the installation of the Cisco HCM-F platform,
More informationNavigation Guide for Cisco Prime LAN Management Solution 4.2
Navigation Guide for Cisco Prime LAN Management Solution 4.2 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS
More informationTripwire App for QRadar Documentation
Tripwire App for QRadar Documentation Release 1.0.0 Tripwire, Inc. April 21, 2017 CONTENTS 1 Introduction 1 2 Tripwire Enterprise 2 2.1 Features............................................. 2 2.2 Prerequisites..........................................
More informationManaging IPSLA Devices
CHAPTER 14 This section contains the following topics: Understanding the IPSLA Devices Page Viewing IPSLA Devices Automatically Importing DCR Devices Adding Adhoc Target Devices Licensing Behavior While
More informationFault Management. Overview of Polling and Thresholds CHAPTER
CHAPTER 3 This chapter describes the following topics: Overview of Polling and Updating Polling Parameters and Setting Priorities Threshold Configuration Managing Polling Parameters Applying Polling and
More informationPrime Performance Manager Overview
1 CHAPTER The following topics provide an overview to Cisco Prime Performance Manager user operations: Prime Performance Manager Features and Functions, page 1-1 Prime Performance Manager Reports, page
More informationConfiguring Cisco IP SLAs ICMP Jitter Operations
This module describes how to configure a Cisco IOS IP Service Level Agreements (SLAs) Internet Control Message Protocol (ICMP) Jitter operation for generating a stream of ICMP packets between a Cisco IOS
More informationOverview of Cisco Prime Collaboration Assurance and Analytics Business
Overview of Cisco Prime Collaboration Assurance and Analytics Business Cisco Prime Collaboration Assurance and Analytics Business is a monitoring and data analytics management application system that allows
More informationProvisioning Dashboards and Reports
Overview, page 1 Overview On a day-to-day basis, operations personnel are likely to use the Dashboard displays to monitor the IP telephony environment. Cisco Prime Collaboration Provisioning has three
More informationSmart PDU Utility. User Manual
Smart PDU Utility User Manual Table of Contents 1. Introduction... 1 2. Installation... 2 3. Smart PDU Utility Interface... 3 1. Introduction General Smart PDU Utility is advanced PDU monitoring, management
More informationOverview of IPM. What Is IPM? CHAPTER
CHAPTER 1 Overview of IPM This chapter provides an overview of Cisco s Internetwork Performance Monitor (IPM) application. It contains the following sections: What Is IPM? Key Terms and Concepts How Does
More informationLicensing the Application CHAPTER
CHAPTER 5 Licensing Application, Configuring E-mail, Cisco.com, Proxy Settings, RCP, SCP Settings, Security, Backup, Authentication Settings and Idle Timeout Settings, Browser and Server Security Mode
More informationTroubleshooting Tools. Tools for Gathering Information
Internetwork Expert s CCNP Bootcamp Troubleshooting Tools http:// Tools for Gathering Information Before implementing a fix, information must be gathered about a problem to eliminate as many variables
More informationConfiguring Service Monitor
CHAPTER 3 The following topics are included: Configuring Trap Receivers, page 3-2 Understanding and Setting Data Source Credentials, page 3-2 Managing the Phone Count, page 3-15 Configuring Settings for
More informationQuick Reference Guide
Dell OpenManage Printer Manager v1.2 Quick Reference Guide www.dell.com support.dell.com Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your
More informationSetting Up the Network for Monitoring
2 CHAPTER Before Prime Collaboration can start monitoring the voice and video endpoints in your network, you must complete several tasks. Table 2-1 provides information about the prerequisites for monitoring
More informationCorreLog. Ping Monitor Adapter Software Users Manual
CorreLog Ping Monitor Adapter Software Users Manual http://www.correlog.com mailto:info@correlog.com CorreLog, Ping Monitor Users Manual Copyright 2008-2017, CorreLog, Inc. All rights reserved. No part
More informationRemote Operation Services
CHAPTER 7 Cisco Management Appliance Urban Security solutions require a mission-critical -centric network to be in place and functioning properly at all times. The network is made up of multiple pieces
More informationConfiguring Cisco IOS IP SLAs DNS Operations
Configuring Cisco IOS IP SLAs DNS Operations First Published: August 14, 2006 Last Updated: January 6, 2011 This module describes how to configure the Cisco IOS IP Service Level Agreements (SLAs) Domain
More informationImportant Notice Cloudera, Inc. All rights reserved.
Cloudera Operation Important Notice 2010-2017 Cloudera, Inc. All rights reserved. Cloudera, the Cloudera logo, and any other product or service names or slogans contained in this document are trademarks
More informationZone-Based Firewall Logging Export Using NetFlow
Zone-Based Firewall Logging Export Using NetFlow Zone-based firewalls support the logging of messages to an external collector using NetFlow Version 9 export format. NetFlow Version 9 export format uses
More informationNMS300 Network Management System Application
NMS300 Network Management System Application Quick Start Guide October 2013 202-11288-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. After installing
More informationManagement Settings ORBEM. This chapter provides instructions for configuring Object Request Broker Element Management (ORBEM)
This chapter provides instructions for configuring Object Request Broker Element Management (ORBEM) and Simple Network Management Protocol (SNMP) options. This chapter includes the following sections:
More informationHPE Network Node Manager i Software 10.30
HPE Network Node Manager i Software 10.30 Step-by-Step Guide to Custom Poller White Paper Contents Custom Poller... 3 Setting Up Your MIB... 3 Step 1: Identify the MIB Variable You Want to Poll... 3 Step
More informationConfigure Notification
s, page 1 Notification Groups, page 2 Notification Criteria, page 3 Types of Notifications, page 3 Configure SMTP Server, page 4 Notifications Limited to Specific Alarms, page 5 s Cisco Prime Collaboration
More informationServiceability. Access Cisco VVB Serviceability. Alarms
Cisco VVB provides configuration details for the following functionality: Configuring alarms for local and remote Syslogs. Configuration trace settings for VVB components. After these settings are enabled,
More informationMonitoring System Health
Monitoring System Health Cisco Prime Infrastructure 3.2 Job Aid Copyright Page THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
More informationCisco Emergency Responder Configuration
After you install Cisco Emergency Responder (Emergency Responder) and configure Cisco Unified Communications Manager (Unified CM), you can configure Emergency Responder so that it begins managing emergency
More informationAdministrative Tasks. Running Background Tasks CHAPTER
CHAPTER 18 This chapter describes administrative tasks to perform with WCS. These tasks include the following: Running Background Tasks, page 18-1 (such as database cleanup, mobility service synchronization,
More informationVerify Radius Server Connectivity with Test AAA Radius Command
Verify Connectivity with Test AAA Radius Command Contents Introduction Prerequisites Requirements Components Used Background Information How The Feature Works Command Syntax Scenario 1. Passed Authentication
More informationTroubleshooting Cisco Emergency Responder System and Administration Problems
CHAPTER 5 Troubleshooting Cisco Emergency Responder System and Administration Problems This chapter covers topics that help you troubleshoot problems related to the Cisco Emergency Responder (Emergency
More informationCONFIGURE MAC NOTIFICATION TRAPS ON CISCO SWITCHES
HOW-TO CONFIGURE MAC NOTIFICATION TRAPS ON CISCO SWITCHES Applicable Versions: FortiNAC 8 03/15/2018 Rev: D 2018 Fortinet 1 of 7 Contents Overview... 3 Introduction... 3 Requirements... 3 Procedure...
More informationUCS-E160DP Double-wide E-Series Server, 6 core CPU, with PCIe
Overview This chapter includes the following sections: Cisco UCS E-Series Servers Overview, page 1 Server Software, page 2 CIMC Overview, page 3 CIMC GUI, page 3 Cisco UCS E-Series Servers Overview The
More informationWhat s New in IGSS V9
INDUSTRIAL AUTOMATION Interactive Graphical SCADA System INSIGHT AND OVERVIEW What s New in IGSS V9 What s New in IGSS V9 1 Table of Contents The IGSS Master Module... 3 Design and Runtime modes... 3 Added
More informationMonitoring WAAS Using WAAS Central Manager. Monitoring WAAS Network Health. Using the WAAS Dashboard CHAPTER
CHAPTER 1 This chapter describes how to use WAAS Central Manager to monitor network health, device health, and traffic interception of the WAAS environment. This chapter contains the following sections:
More informationUser and System Administration
CHAPTER 2 This chapter provides information about performing user and system administration tasks and generating diagnostic information for obtaining technical assistance. The top-level Admin window displays
More informationEmbedded Event Manager (EEM)
CHAPTER 12 This chapter consists of the following: What is EEM? Components of Cisco IOS EEM Types of Actions What is EEM? EEM (Embedded Event Manager) is an IOS technology that runs on the control plane
More informationConfiguring IP SLAs LSP Health Monitor Operations
Configuring IP SLAs LSP Health Monitor Operations This module describes how to configure an IP Service Level Agreements (SLAs) label switched path (LSP) Health Monitor. LSP health monitors enable you to
More informationConfigure System Parameters
This section includes the following:, page 1 Cisco Prime Collaboration allows you to configure system parameters for Cisco Prime Collaboration Assurance. The following are the system configuration parameters
More informationIP SLAs Multicast Support
This module describes how to configure and schedule an IP Service Level Agreements (SLAs) multicast UDP jitter operation for measuring and reporting statistics such as one way latency, jitter, and packet
More informationScheduling Inventory Polling
CHAPTER 4 Inventory You have now added devices to your network and created static and dynamic views. You are ready to use your device views to generate some reports. The Inventory tasks let you collect
More informationTraffic and Performance Visibility for Cisco Live 2010, Barcelona
Traffic and Performance Visibility for Cisco Live 2010, Barcelona Background Cisco Live is Cisco's annual premier education and training event for IT, networking, and communications professionals. Cisco
More information