Version /09/17

Transcription

1 EasyBuiillder Pro Rellease Note Version /09/17 [New Feature] 1. A new option can decide whether to generate a backup file (bak) while saving a modified project. If [Generate backup of project file before save] is selected, a bak file is generated when saving the project. If the bak file is not needed, do not select this option. 2. Flow Block object is added. Flow Block object displays the flow status of the blocks in the pipe or the status of the transportation lines, the blocks flow at a fixed interval in a horizontal or vertical straight line. The features of Flow Block: Each section of the flow block must be a horizontal or vertical straight line and the blocks

2 flow at a fixed interval within it. Dynamic speed and direction adjustment (Speed and direction can be controlled by a designated register.) Security mechanism (Interlock), which hides Flow Block when the status of designated bit is invalid. 3. [Project] tab is added in Shape Manager and Picture Manager. Shape Manager and Picture Manager provide two modes: [Project] and [Library]. Shapes and pictures in [Project] mode will be stored in emtp project file. When the emtp file is opened on another PC, the shapes and pictures can be correctly displayed.

3 Switch to [Project] tab to view pictures. Click this button to copy the picture to [Project] field. 4. Tag information can be stored in emtp project file. The following drivers of Rockwell Free Tag Names can store tags in emtp project file. Rockwell CompactLogix - Free Tag Names Rockwell EtherNet/IP (CompactLogix) - Free Tag Names Rockwell EtherNet/IP (ControlLogix) - Free Tag Names Tags imported to EBPro project are stored in emtp file and can be correctly displayed on another PC without using [Structure Editor]. [Structure Editor] could be opened by clicking [Data Type] in [System Parameter Settings]. In the editor, click OK to save modified data. The edited tags can be used after clicking [Import Tag].

4 [Corrections] The following errors were corrected in this release: 1. In [System Parameter Settings]» [ ] tab, if an invalid [Server] is used, when an alarm is triggered, sending notification will cause HMI to crash.

5 2. The CANOPEN EDS file of Schneider ATV312 cannot be successfully imported. 3. When continuously and rapidly triggering the objects that use Sound Library, the sound file cannot be played correctly. 4. While a numeric input keypad is opened, changing the system time to a time earlier than present time with an external device may cause HMI inoperable. [Drivers] 1. DELTA DVPEN01-SL (Ethernet) driver is added. 2. LS XECH Cnet driver is added. 3. LS XECH FEnet (Ethernet) driver is added. 4. MITSUBISHI MELSEC-Q/L - ASCII Mode (Ethernet) driver is added. 5. TOSHIBA MACHINE Provisor TC200 device types B, G, H, T, C, S, E are added. 6. Fixed the problem where LS XGB Cnet reads / writes registers S and S_Bit incorrectly. The correct behavior of S, S_Bit: Enter value nn (nn: 0~99) at address DDD of word register S, and then the state of address DDDnn of bit register S_Bit is set ON. EX: Enter 15 in S-32, and then S_Bit-3215 is set ON. 7. Fixed the problem where Rockwell DH485 driver failed to communicate with Rockwell SLC5/01

6 PLC. 8. CANopen Slave device types SDO_8bit_Bit, SDO_16bit_Bit are added. 9. Bacnet IP driver now supports Bacnet IP Server. 10. Panasonic MINAS A4 device types Comm2D_S and Comm2D_M are added. 11. The range of Siemens S7-400 (Ethernet) device types DBn, DBDn is extended to The following drivers of Rockwell Free Tag Names can support Program Tags (or different scope). Rockwell CompactLogix - Free Tag Names Rockwell EtherNet/IP (CompactLogix) - Free Tag Names Rockwell EtherNet/IP (ControlLogix) - Free Tag Names