Questions & Answers PDF Page 1. Oracle. 1Z0-067 Exam. Oracle Upgrade Oracle9i/10g/11g OCA OR OCP to Oracle Database Exam

Transcription

1 Questions & Answers PDF Page 1 Oracle 1Z0-067 Exam Oracle Upgrade Oracle9i/10g/11g OCA OR OCP to Oracle Database Exam Thank you for Downloading 1Z0-067 exam PDF Demo You can also Buy our 1Z0-067 Premium Full Version /Exam/1Z0-067

2 Questions & AnswersPDF Page 2 Question: 1 V e r s i o n : 10.0 Whichtwo statements are true about scheduling operations ina pluggable database (PDB)? A.Scheduler jobs for a PDBcan be defined only at the container database (CDB) level. B. A job defined ina PDBruns only ifthat PDBisopen. C.Scheduler attribute setting isperformed only at the CDBlevel. D. Scheduler objects created by users can be exported or importedusing Data Pump. E.Scheduler jobs for a PDBcan be created only by common users. Answer: B,D In general, all scheduler objects created by the user can be exported/imported into the PDB using data pump. Predefined scheduler objects will not get exported and that means that any changes made to these objects by the user will have to be made once again after the database has been imported into the pluggable database. However, this is how import/export works currently. A job defined ina PDBwill run only ifa PDBisopen. Question: 2 A complete database backup to media is t a k e n for your database every day. Which three actions wouldyou t a k e to improvebackup performance? A.Set the backup_tape_io_slaves parameter to true. B. Set the dbwr_io_slaves parameter to a nonzero value ifsynchronous I/Oisinuse. C.Configure largepool ifnot already done. D. Remove the rate parameter, ifspecified, inthe allocate channel command. E.Always use RMAN compression for tape backups rather than the compression provided by media manager. F. Alwaysuse synchronous I/Ofor the database. Answer: B,C,D Tuning RMAN Backup Performance: Procedure Many factors can affect backup performance. Often, finding the solution to a slow backup isa process of trial and error. T o getthe best performance for a backup, follow the suggested steps inthis section: Step 1: Remove RATE Parameters from Configured and Allocated Channels Step 2: If Y o u UseSynchronous Disk I/O, Set DBWR_IO_SLAVES Step 3: If Y o u Fa i l to Allocate Shared Memory, Set LARGE_POOL_SIZE Step 4: Tune RMAN T a p e Streaming Performance Bottlenecks Step 5: Query V$ Views to Identify Bottlenecks Question: 3

3 Questions & AnswersPDF Page 3 For whichthree pieces of information can you use the RMAN list command? A.stored scripts inthe recovery catalog B. available archived redo logfiles C.backup sets and imagecopies that are obsolete D. backups of tablespaces E.backups that are markedobsolete according to the current retention policy Answer: A,B,D About the LIST Command: The primary purpose of the LIST command isto list backup and copies. For example, you can list: -Backups and proxy copies of a database, tablespace, datafile, archived redo log, or control file -Backups that have expired -Backups restricted by time, path name, device type, t a g, or recoverability -Archived redo log files and disk copies Question: 4 Y o u notice performance degradation inyour production Oracle 12c database. Y o u want to know what caused this performance difference. Whichmethodor fe ature should you use? A.Database Replay B. AutomaticDatabase Diagnostic Monitor (ADDM) ComparePeriod report C.ActiveSession History(ASH) report D. SQL Performance Analyzer Answer: B References: Question: 5 Whichthree statements are true about a job chain? A.Itcan contain a nested chain of jobs. B. Itcan be used to implement dependency-based scheduling. C.Itcannot invokethe same program or nested chain inmultiple steps inthe chain. D. Itcannot have morethan one dependency. E.Itcan be executed using event-based or time-basedschedules. Answer: A,B,E

4 Questions & AnswersPDF Page 4 Chains are the meansby which you can implement dependency based scheduling, in which jobs are started depending on the outcomes of one or more previous jobs. DBMS_SCHEDULER.DEFINE_CHAIN_STEP DBMS_SCHEDULER.DEFINE_CHAIN_EVENT_STEP Question: 6 Because of logical corruption of data ina t a b l e, you want to recover the t a b l e from an RMAN backup to a specified point intime. Examinethe steps to recover this t a b l e from an RMAN backup: 1.Determine whichbackup contains the t a b l e that needs to be recovered. 2.Issue the recover t a b l e RMAN command withan auxiliary destination defined and the point intime specified. 3.Import the Data Pumpexport dump file intothe auxiliary instance. 4.Create a Data Pumpexport dump file that contains the recovered t a b l e on a t a r g e t database. Identify the required steps inthe correct order. A.1, 4, 3 B. 1, 2 C.1, 4, 3, 2 D. 1, 2, 4 Answer: D Because according to oracle PDFs if you run restore t a b l e... auxiliary a impede and renam e can be included. So there is no reason to make the import manually if it can be already included in step 2. Question: 7 Examinethe command: SQL> RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL; Inwhichtwo scenarios isthis command required? A.The current online redo logfile ismissing. B. A data file belonging to a noncritical tablespace ismissing. C.Allthe control files are missing. D. The database backup isolder than the control file backup. E.Allthe data files are missing. Answer: A,C Question: 8

5 Questions & AnswersPDF Page 5 Whichtwo are prerequisites for setting up Flashback Data Archive? A.Fa st Recovery Areashould be defined. B. Undo retention guarantee should be enabled. C.Supplemental logging should be enabled. D. AutomaticUndo Management should be enabled. E.Allusers using Flashback Data Archiveshould have unlimited quota on the Flashback Data Archive tablespace. F. The tablespace in which the Flashback Data Archive is created should have Automatic Segment Space Management (ASSM) enabled. Answer: D,F There are a number of restrictions for flashback archives: The tablespaces used for a flashback archive must use local extent management and automatic segment space management. The database mustuse automatic undo management. Question: 9 The environmental variable oracle_base is set to /u01/app/oracle and oracle_home is set to /u01/app/oracle/product/12.1.0/db 1. Y o u want to check the diagnostic files created as part of the AutomaticDiagnostic Repository (ADR). Examinethe initialization parameters set inyour database. NAME TYPE VALUE audit_file_deststring/u01/app/oracle/admin/eml2rep/adump background_dump_deststring core_dump_deststring db_create_file_deststring db_recovery_file_deststring/u01/app/oracle/fast_recovery_area diagnostic_deststring Whatisthe location of the ADRbase? A.Itisset to/u01/app/oracle/product:/12.1.0/db_1/log. B. Itisset to /u01/app/oracle/admin/en12.1.0/adump. C.Itisset to /u01/app/oracle. D. Itisset to /u01/app/oracle/flash_recovery_area. Answer: C The Automatic Diagnostic Repository (ADR) is a directory structure that is stored outside of the database. Itistherefore available for problem diagnosis whenthe database isdown. The ADR root directory is known as ADR base. Its location is set by the DIAGNOSTIC_DEST

6 Questions & AnswersPDF Page 6 initialization parameter. Ifthis parameter isomitted or leftnull, the database sets DIAGNOSTIC_DEST upon startup as follows: If environment variable ORACLE_BASE is set, DIAGNOSTIC_DEST is set to the directory designated by ORACLE_BASE. Ifenvironment variable ORACLE_BASE isnot set, DIAGNOSTIC_DEST isset to ORACLE_HOME/log. Question: 10 Y o u want to export the pluggable database (PDB) hr pdb1 from the multitenant container database (CDB)CDB1 and importitintothe cdb2 CDBas the emp_pdb1 PDB. Examinethe list of possible steps required to perform the t a s k : 1.Create a PDBnamed emp_pdb1. 2.Export the hr_pdb1 PDBby using the full clause. 3.Open the emp_pdb1 PDB. 4.Mount the emp_pdb1 PDB. 5.Synchronize the emp_pdb1 PDBinrestricted mode. 6.Copy the dump file to the Data Pumpdirectory. 7.Create a Data Pumpdirectory inthe emp_pdb1 PDB. 8.Import data intoemp_pdb1 withthe full and rem ap clauses. 9.Create the same tablespaces inemp_pdb1 as inhr_pdb1 for new localuser objects. Identify the required steps inthe correct order. A.2, 1, 3, 7, 6, and 8 B. 2, 1, 4, 5, 3, 7, 6, 9, and 8 C.2, 1, 3, 7, 6, 9, and 8 D. 2, 1, 3, 5, 7, 6, and 8 Answer: C Because the step 2 says that you perfom an expdp with the full clause and you don t need to create the tablespaces when you perform the impdp. FULL=yes will export tablespace definitions. So no need step 9. Question: 11 Y o u wishto create jobs to satisfy these requirements: 1. Automatically bulk loaddata from a flat file. 2. Rebuild indexes on the SALES t a b l e after completion of the bulk load. Howwouldyou create these jobs? A.Createboth jobs by using Scheduler rai sed events. B. Createboth jobs using application rai sed events. C.Createone job to rebuild indexes using application rai sed events and another job to perform bulk loadusing Scheduler rai sed events. D. Create one job to rebuild indexes using Scheduler rai sed events and another job to perform bulk loadby using events rai sed by the application.

7 Questions & AnswersPDF Page 7 Answer: C The bulk loader would be started in response to a file watcher scheduler event and the indexes would be rebuilt in response to an application event rai sed by the bulk loader. Y o u r application can rai se an event to notify the Scheduler to start a job. A job started in this way is referred to as an event-based job. The job can optionally retrieve the message content of the event. Question: 12 Y o u r Oracle 12c multitenant container database (CDB) contains multiple pluggable databases (PDBs). In the PDB hr_pdb, the common user c##admin and the local user b_admin have only the connect privilege. Y o u create a common rol e c##role1 withthe create t a b l e and select any t a b l e privileges. Y o u then execute the commands: SQL> GRANTc##role1 T O c M a d m i n CONTAINER=ALL; SQL>CONNsys/oracle@HR_PDB assysdba SQL> GRANTc##role1TO b_admin CONTAINER=CURRENT; Whichtwo statements are true? A. C##admin can create and select any t a b l e, and grant the c##role1 rol e to users only in the root container. B. B_admin can create and select any t a b l e inboth the root container and kr_pdb. C.c##admin can create and select any t a b l e inthe root container and all the PDBs. D. B_admin can create and select any t a b l e only inhr_pdb. E.The grantc=»role1 to b_admin command returns an error because container should be set to ALL. Question: 13 Answer: C,D Examinethe commands executed inthe root container of your multitenant container database (CDB) that has multiple pluggable databases (PDBs): SQL> CREATEUSERc##a_admin IDENTIFIED BY orcl123; SQL> CREATEROLE c##role1 CONTAINER=ALL; SQL> GRANT CREATEVIEW T O C##roleI CONTAINER=ALL; SQL> GRANT c##role1 T O c##a_admin CONTAINER=ALL; SQL> REVOKE c##role1 FROM c##a_admin; Whatisthe resul t of the rev oke command? A.Itexecutes successfully and the c##role1 rol e isrevoked from the c##a_admin user only inthe root container. B. Itfails and reports an error because the container=all clause isnot used. C. It executes successfully and the c##rocl1 rol e is revoked from the c##a_admin user in the root

8 Questions & AnswersPDF Page 8 database and all the PDBs. D. Itfails and reports an error because the comtainer=current clause isnot used. Answer: B SQL> REVOKE c##role1 FROM c##a_admin; REVOKE c##role1 FROM c##a_admin * ERROR at line 1: ORA : ROLE C##ROLE1 not granted to C##A_ADMIN SQL> REVOKE c##role1 FROM c##a_admin CONTAINER=ALL; Revoke succeeded. SQL> This CREATE USER c##a_admin IDENTIFIED BY orcl123; will create common user event container isnot specified. Question: 14 Examinethe RMAN command: RMAN> CONFIGURE ENCRYPTION FOR DATABASE ON; RMAN> BACKUP DATABASE PLUSARCHIVELOG; Whichprerequisite mustbe metbefore accomplishing the backup? A.The password for the encryption mustbe set up. B. Oracle wallet for the encryption mustbe set up. C.Allthe tablespaces inthe database mustbe encrypted. D. Oracle Database V a u l t mustbe enabled. Answer: B Explanation Configuration encryption will used by Transparent encryption. For transparent encryption, you will need to create a wallet, and it must be open. Transparent encryption will then occur automatically after you have issued the CONFIGURE ENCRYPTION FOR DATABASE ON or CONFIGURE ENCRYPTION FOR TABLESPACE ON command. CONFIGURE ENCRYPTION : Y o u can use this command to persistently configure transparent encryption. Y o u cannot persistently configure dual mode or password mode encryption. SET ENCRYPTION : Y o u can use this command to configure dual mode or password mode encryption at the RMAN session level. Question: 15 A database is running in archive log mode. The database contains locally managed tablespaces. Examinethe RMAN command: RMAN> BACKUP ASCOMPRESSED BACKUPSET SECTION SIZE 1024M DATABASE; Whichstatement istrue about the execution of the command?

9 Questions & AnswersPDF Page 9 A.The backup succeeds only ifall the tablespaces are locally managed. B. The backup succeeds only ifthe RMAN default device for backup isset to disk. C.The backup fails because you cannot specify section size for a compressed backup. D. The backup succeeds and only the used blocks are backed up witha maximum backup piece size of 1024 MB T21:58:00.47<!--[if gte mso9]><xml> <o:officedocumentsettings> <o:relyonvml/> <o:allowpng/> </o:officedocumentsettings> </xml><![endif]--> T21:58:00.48<!--[if gte mso9]><xml> <w:worddocument> <w:view>normal</w:view> <w:zoom>0</w:zoom> <w:trackmoves/> <w:trackformatting/> <w:punctuationkerning/> <w:validateagainstschemas/> <w:saveifxmlinvalid>false</w:saveifxmlinvalid> <w:ignoremixedcontent>false</w:ignoremixedcontent> <w:alwaysshowplaceholdertext>false</w:alwaysshowplaceholdertext> <w:donotpromoteqf/> <w:lidthemeother>ru</w:lidthemeother> <w:lidthemeasian>ja</w:lidthemeasian> <w:lidthemecomplexscript>x-none</w:lidthemecomplexscript> <w:compatibility> <w:breakwrappedtables/> <w:snaptogridincell/> <w:wraptextwithpunct/> <w:useasianbreakrules/> <w:dontgrowautofit/> <w:splitpgbreakandparamark/> <w:enableopentypekerning/> <w:dontflipmirrorindents/> <w:overridetablestylehps/> </w:compatibility> <m:mathpr> <m:mathfont m:val="cambria Math"/> <m:brkbin m:val="before"/> <m:brkbinsub m:val="--"/> <m:smallfrac m:val="off"/> <m:dispdef/> <m:lmargin m:val="0"/> Answer: D

10 Questions & AnswersPDF Page 10 <m:rmargin m:val="0"/> <m:defjc m:val="centergroup"/> <m:wrapindent m:val="1440"/> <m:intlim m:val="subsup"/> <m:narylim m:val="undovr"/> </m:mathpr></w:worddocument> </xml><![endif]--> T21:58:00.51<!--[if gte mso9]><xml> <w:latentstyles DefLockedState="false" DefUnhideWhenUsed="true" DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="276"> <w:lsdexception Locked="false" Priority="0" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Normal"/> <w:lsdexception Locked="false" Priority="9" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="heading 1"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 2"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 3"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 4"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 5"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 6"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 7"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 8"/> <w:lsdexception Locked="false" Priority="9" QFormat="true" Name="heading 9"/> <w:lsdexception Locked="false" Priority="39" Name="toc1"/> <w:lsdexception Locked="false" Priority="39" Name="toc2"/> <w:lsdexception Locked="false" Priority="39" Name="toc3"/> <w:lsdexception Locked="false" Priority="39" Name="toc4"/> <w:lsdexception Locked="false" Priority="39" Name="toc5"/> <w:lsdexception Locked="false" Priority="39" Name="toc6"/> <w:lsdexception Locked="false" Priority="39" Name="toc7"/> <w:lsdexception Locked="false" Priority="39" Name="toc8"/> <w:lsdexception Locked="false" Priority="39" Name="toc9"/> <w:lsdexception Locked="false" Priority="35" QFormat="true" Name="caption"/> <w:lsdexception Locked="false" Priority="10" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Title"/> <w:lsdexception Locked="false" Priority="1" Name="Default Paragraph Font"/ > <w:lsdexception Locked="false" Priority="11" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/> <w:lsdexception Locked="false" Priority="22" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Strong"/> <w:lsdexception Locked="false" Priority="20" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/> <w:lsdexception Locked="false" Priority="59" SemiHidden="false" UnhideWhenUsed="false" Name="Table Grid"/> <w:lsdexception Locked="false" UnhideWhenUsed="false" Name="Placeholder T e x t " / > <w:lsdexception Locked="false" Priority="1" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false"

11 Questions & AnswersPDF Page 11 UnhideWhenUsed="false" Name="LightShading"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 1"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 1"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 1"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/> <w:lsdexception Locked="false" UnhideWhenUsed="false" Name="Revision"/> <w:lsdexception Locked="false" Priority="34" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="ListParagraph"/> <w:lsdexception Locked="false" Priority="29" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Quote"/> <w:lsdexception Locked="false" Priority="30" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/>

12 Questions & AnswersPDF Page 12 <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 1"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 1"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 2"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 2"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 2"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 2"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 2"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 3"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 3"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 3"/>

13 Questions & AnswersPDF Page 13 <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 3"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 3"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 4"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 4"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 4"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 4"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 4"/>

14 Questions & AnswersPDF Page 14 <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 5"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 5"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 5"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/> <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 5"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 5"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/> <w:lsdexception Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="LightShading Accent 6"/> <w:lsdexception Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="LightList Accent 6"/> <w:lsdexception Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="LightGrid Accent 6"/> <w:lsdexception Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/> <w:lsdexception Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/> <w:lsdexception Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/> <w:lsdexception Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/> <w:lsdexception Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/> <w:lsdexception Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/>

15 Questions & AnswersPDF Page 15 <w:lsdexception Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/> <w:lsdexception Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 6"/> <w:lsdexception Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/> <w:lsdexception Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 6"/> <w:lsdexception Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/> <w:lsdexception Locked="false" Priority="19" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/> <w:lsdexception Locked="false" Priority="21" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/> <w:lsdexception Locked="false" Priority="31" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/> <w:lsdexception Locked="false" Priority="32" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/> <w:lsdexception Locked="false" Priority="33" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Book Title"/> <w:lsdexception Locked="false" Priority="37" Name="Bibliography"/> <w:lsdexception Locked="false" Priority="39" QFormat="true" Name="TOCHeading"/> </w:latentstyles> </xml><![endif]--> T21:58:00.52<!--[if gte mso10]> <style> /* Style Definitions */ table.msonormaltable {mso-style-name:"table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:calibri; mso-ascii-font-family:calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ru;}

16 Questions & AnswersPDF Page 16 </style> <![endif]--> T21:58:00.52<!--StartFragment--> COMPRESSED enables binary compression. RMAN compresses the data written into the backup set to reduce the overall size of the backup set. All backups that create backup sets can create compressed backup sets. Restoring compressed backup sets isno different from restori ng uncompressed backup sets. RMAN applies a binary compression algorithm as it writes data to backup sets. This compression is similar to the compression provided by manymediamanager vendors. When backing up to a locally attached tape device, compression provided by the media management vendor is usually preferable to the binary compression provided by BACKUP ASCOMPRESSED BACKUPSET. Therefore, use uncompressed backup sets and turn on the compression provided by the media management vendor when backing up to locally attached t a p e devices. Y o u should not use RMAN binary compression andmedia manager compression together. Some CPUoverhead is associated with compressing backup sets. If the t a r g e t database is running at or near its maximum load, then you may find the overhead unacceptable. In most other circumstances, compressing backup sets saves enough disk space to be worththe CPUoverhead. SECTION SIZE sizespec Specifies the size of each backup section produced during a data file backup. By setting this parameter, RMAN can create a multisection backup. In a multisection backup, RMAN creates a backup piece that contains one file section, which is a contiguous rang e of blocks in a file. All sections of a multisection backup are the same size. Y o u can create a multisection backup for a data file, but not a data file copy. File sections enable RMAN to create multiple steps for the backup of a single largedata file. RMAN channels can process each step independently and in parallel, with each channel producing one section of a multisection backup set. If you specify a section size that is larger than the size of the file, then RMAN does not use multisection backup for the file. Ifyou specify a small section size that would produce morethan 256 sections, then RMAN increases the section size to a value that resul ts inexactly 256 sections. Depending on where you specify this parameter in the RMAN syntax, you can specify different section sizes for different files inthe same backup job. Note: You cannot use SECTION SIZE with MAXPIECESIZE or with INCREMENTAL LEVEL T21:58:00.52<!--EndFragment-->

17 Questions & Answers PDF Page 17 Thank You for trying 1Z0-067 PDF Demo To Buy our 1Z0-067 Premium Full Version visit link below /Exam/1Z0-067 Start Your 1Z0-067 Preparation Download and Pass Exam 1Z0-067 Easily with CertKillers.net questions.