Or chestrator VM Nutanix Acr opolis Hyper visor (AHV) Deploym ent Guide

Transcription

1 Silver Peak Or chestrator VM Nutanix Acr opolis Hyper visor (AHV) Deploym ent Guide How to deploy an Orchestrator VM with Nutanix

2 Table of Contents Table of Contents 2 Copyright and Trademarks 3 Support 4 Related Documentation 5 About 6 Download the Silver Peak Orchestrator QCOW2 Image 7 Upload the QCOW2 image file onto the Nutanix system 11 Create an Orchestrator VM 15 2

3 Copyright and Trademarks Date: March 2018 Copyright 2018 Silver Peak Systems, Inc. All rights reserved. Information in this document is subject to change at any time. Use of this documentation is restricted as specified in the End User License Agreement. No part of this documentation can be reproduced, except as noted in the End User License Agreement, in whole or in part, without the written consent of Silver Peak Systems, Inc. Trademark Notification The following are trademarks of Silver Peak Systems, Inc.: Silver Peak Systems TM, the Silver Peak logo, Network Memory TM, Silver Peak NX-Series TM, Silver Peak VX-Series TM, Silver Peak VRX-Series TM, Silver PeakSilver Peak Unity EdgeConnect TM, and Silver Peak Orchestrator TM. All trademark rights reserved. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. Warranties and Disclaimers THIS DOCUMENTATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SILVER PEAK SYSTEMS, INC. ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS IN THIS DOCUMENTATION OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR LINKED TO THIS DOCUMENTATION. REFERENCES TO CORPORATIONS, THEIR SERVICES AND PRODUCTS, ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. IN NO EVENT SHALL SILVER PEAK SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS DOCUMENTATION. THIS DOCUMENTATION MAY INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE DOCUMENTATION. SILVER PEAK SYSTEMS, INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENTATION AT ANY TIME. Silver Peak Systems, Inc De La Cruz Boulevard Santa Clara, CA (toll-free in USA)

4 Support For product and technical support, contact Silver Peak Systems at either of the following: (toll-free in USA) We re dedicated to continually improving the usability of our products and documentation. If you have suggestions or feedback for our documentation, send an to If you have comments or feedback about the interface, send an to 4

5 Related Documentation Release Notes provide information on new software features, system bugs, and software compatibility. All user docum entation is available at 5

6 About This guide provides steps to provision an Orchestrator VM on a Nutanix system running Acropolis Hypervisor (AHV). 6

7 Download the Silver Peak Orchestrator QCOW2 Image Before you can provision an Orchestrator VM on the Nutanix system, download the Orchestrator QCOW2 im age. 1. Log into the Silver Peak Support Portal. The Login screen opens. 2. Type in your username and password. A screen opens to display installation packages. 7

8 3. Scroll down to select KVM, and click Orchestrator (GMS). The Release screen opens. 8

9 4. Select GA to expand the list, identify the latest release num ber, and click it. 5. Under Images and Documentation, click the green down arrow icon to download the file onto your local server. You will be required to upload the image file to the Nutanix system. 9

10 10

11 Upload the QCOW2 image file onto the Nutanix system 1. Log into the Nutanix AHV Cluster UI. 2. From the main AHV screen, click the Settings gear icon on the top right hand corner and scroll down to select Image Configuration. 11

12 The Im age Configuration screen opens. 12

13 3. From the Image Configuration screen, click + Upload Image and configure the following settings. Type in a name and annotation. From Image Type, select Disk. From Storage Container, select one from the drown-down list. From Image Source, click the Upload a file radio button and select Choose File. Browse the directory until you locate the QCOW2 image file, and click Save. 13

14 4. Once the upload completes, the image file appears on the Image Configuration screen. Click Close to return to the Hom e Screen. You are now ready to create the Orchestrator VM. 14

15 Create an Orchestrator VM Now that you've uploaded the QCOW2 image file to your Nutanix system, you are ready to create the Orchestrator VM. 1. From the Hom e screen, click the Home drop-down and select VM. The Create VM screen opens. 2. From the Create VM screen, configure the following these settings. 15

16 Type in a name and description. Leave the Use this VM as an Agent box unchecked. Scroll down to select the Disk settings and click X to delete the default CD-ROM option. To enter the appropriate vcpu and memory requirements under Computer Details, refer to the Orchestrator Host System Requirem ents guide. 16

17 3. Click Yes to confirm. 4. Click +Add New Disk. The Add New Disk screen opens. 5. From the Add Disk screen, configure the following settings. 17

18 For Type, select Disk. For Operation, select Clone from Image Service. For Bus Type, select SCSI. For Image, select the Silver Peak QCOW2 image from the list. Note that the Size (GIB) field populates to 500 GB. 6. Click Add to create the disk. The new disk appears on the Create VM screen. 18

19 7. On the Create VM screen, scroll down and click Add New NIC. 19

20 8. From the Create NIC screen, connect vlan.28 to the eth0 interface of the Orchestrator, and click Add. 20

21 9. Once you configured your settings, click Save. At this point, your Orchestrator VM is created. 10. To power it on, return to the following screen and click Power on. 21

22 The IP address of your Orchestrator VM appears after a few m inutes. 11. Using the IP address assigned to your Orchestrator VM, log into your Orchestrator VM by typing in your username and password. The default is admin, admin. 22

23 Now that you have successfully deployed the Orchestrator on AHV, refer to the Orchestrator Operator's Guide to configure it and start building your overlays for your SD-WAN. 23