Installing MySQL Subscriber Database
|
|
- Harold Lindsey
- 6 years ago
- Views:
Transcription
1 CHAPTER 2 This chapter describes how the optional MySQL subscriber database is installed for use with the Cisco SIP Proxy Server. An installation script, install_mysql_db, is used. This script only runs on Linux and has been successfully tested on Redhat 6.2, 7.0 and 7.1 platforms. During installation, the script does the following: Install the MySQL client and MySQL server RPMs. Create the SIP database and subscriber table. After a successful installation, you can use the functionalities offered by script sysadmin_mysql_user. This script allows you to add, remove and modify subscriber records in the MySQL subscriber database. MySQL Subscriber Database This database is needed when the Cisco SIP Proxy Server performs the following. Authorization (using HTTP-Digest), or Call Forwarding features: Call Forward Unconditional Call Forward on Busy Call Forward on (user) No Answer Call Forward on (device) Unavailable It can be installed on either the same or different computer system from the Cisco SIP Proxy Server(s). For Linux installation of the Cisco SIP Proxy Server, refer to CD Installation Guide for Cisco SIP Proxy Server on Linux. Installing the MySQL Subscriber Database Step 1 Step 2 At the system prompt, log in as root. % su root Enter the password at the next prompt. 2-1
2 Installing the MySQL Subscriber Database Chapter 2 Note If you are not logged in as the root user, the following error message appears. Step 3 Run the install_mysql_db script from the bin directory of the Cisco SIP Proxy Server. /usr/local/sip/bin/install_mysql_db Step 4 Enter Y for Yes to continue installation, and N for No to quit. If you enter Y, the following screen appears. Step 5 If your system is connected to the public internet, enter Y to ftp to MySQL RPMs. Otherwise, ftp the following RPM files from URL ftp.mysql.com. The following files are in directory MySQL MySQL-client i386.rpm MySQL i386.rpm MySQL-shared i386.rpm If you enter Y in the above step, the following screen appears. 2-2
3 Chapter 2 Installing the MySQL Subscriber Database Step 6 Press Enter key to accept the default values. These defaults are valid for most users. If you do not want the default values, enter a FTP server, MySQL RPM directory, MySQL client RPM (remote) filename, MySQL server RPM (remote) filename and MySQL Shared Library RPM (remote) filename as you are prompted. When ftp is done, the following screen appears. Step 7 As prompted, enter the local pathnames where the MySQL client RPM, server RPM and shared library RPM reside. The following screen shows these prompts. 2-3
4 Installing the MySQL Subscriber Database Chapter 2 The following screens show a successful file transfer of the MySQL client, MySQL server and MySQL shared library RPMs respectively. If the file transfer is stalled, the following screen appears. The script will automatically retry the file transfer up to five times. 2-4
5 Chapter 2 Installing the MySQL Subscriber Database The following screen appears after five unsuccessful retries. This indicates your system is not connected to the public internet. Manually ftp your files as mentioned in step 6. If the file transfer is successful, the following screen appears. Step 8 Enter the MySQL Administrator s root password as prompted. This password is not the same as the root user password. Step 9 As prompted, enter a username and password for the Cisco SIP Proxy Server(s) to access the MySQL server. The defaults shown are valid for most users. 2-5
6 MySQL Subscriber Database Uninstallation Chapter 2 Step 10 Enter MySQL database name and subscriber table name as prompted. The defaults shown are valid for most users. Message on installation completion appears as follows. MySQL Subscriber Database Uninstallation This section describes how to uninstall the MySQL server and MySQL client. Step 1 Step 2 At the system prompt, log in as root. At next prompt, enter./uninstall_mysql_db. Step 3 Enter Y or N to the question Do you wish to continue? 2-6
7 Chapter 2 MySQL Subscriber Database Uninstallation Warning Step 4 Use caution. If you enter Y to the question showed in the next step, your existing MySQL databases will be removed. Enter Y or N to the question Do you wish to delete the MySQL databases? Message Uninstall operation completion appears as in the following screen. 2-7
8 MySQL Subscriber Database Uninstallation Chapter 2 2-8
Managing Databases. Prerequisites. Information About the Database Administration Tools CHAPTER
CHAPTER 4 This chapter describes two Cisco SIP proxy server (Cisco SPS) database administration tools: The registry and routing (regroute) databases tool The MySQL database tool It contains the following
More informationLinux VPN Configuration
Linux VPN Configuration Note. This information is based on Red Hat 9.0, it should be used as a guide only as other distributions may have similar installation methods. VPN Software Installation - PPP (Point-to-Point
More informationDeploying an IVR Web Application
Deploying an IVR Web Application Last Updated: July 24, 2008 The Cisco Unity Express Interactive Voice Response (IVR) feature allows you to deploy your VoiceXML scripts, which represent the static content
More informationPerforming Maintenance Operations
This chapter describes how to back up and restore Cisco Mobility Services Engine (MSE) data and how to update the MSE software. It also describes other maintenance operations. Guidelines and Limitations,
More informationDeploying Cisco Nexus Data Broker Embedded for OpenFlow
Deploying Cisco Nexus Data Broker Embedded for OpenFlow This chapter contains the following sections: Obtaining the Cisco Nexus Data Broker Embedded Software for OpenFlow, page 1 Upgrading to Release 3.2.2,
More informationAuto-Provisioning Mediatrix units May 31, 2011
Auto-Provisioning Mediatrix units May 31, 2011 Proprietary 2011 Media5 Corporation Table of Contents Introduction... 3 Application Scenario... 3 Overview of the Server Configuration... 4 Preparing Windows
More informationDownloading Device Packages
CHAPTER 2 Downloading Device Packages New device support can be added to CiscoView incrementally any time after the initial installation of CiscoView. To add incremental device support, access the Cisco
More informationIOL INTACT Installation Guide
IOL INTACT Installation Guide February 25, 2014 Contents 1 System Requirements 1 2 Installing IOL INTACT 3 3 Post-Installation 4 3.1 Wireshark............................. 4 3.2 Opening pcap Files........................
More informationMassey University Follow Me Printer Setup for Linux systems
Massey University Follow Me Printer Setup for Linux systems RedHat and Debian based systems Requirements You must have an active Massey network account, i.e. you should already be able to log onto the
More informationInstalling the Product Software
CHAPTER 1 The Cisco Configuration Engine is a network management software that acts as a configuration service for automating the deployment, management, and upgrading of network devices and services.
More informationCompiere 3.3 Installation Instructions Linux System - Oracle Database
Compiere 3.3 Installation Instructions Linux System - Oracle Database Compiere Learning Services Division Copyright 2010 Consona ERP, inc. All rights reserved www.compiere.com Table of Contents Compiere
More informationConfiguring Cisco SPS
CHAPTER 2 Configuring Cisco SIP proxy server (Cisco SPS) involves tasks such as creating a proxy-server farm, setting up individual proxy servers to handle tasks, and adding subscribers, registries, and
More informationBacking Up and Restoring Data
Backing Up and Restoring Data Last Updated: July 25, 2006 Cisco Unity Express backup and restore functions use an FTP server to store and retrieve data. The backup function copies the files from the Cisco
More informationRelease Notes for Cisco Aironet Client Utilities, Version 2.1 for Linux
Release s for Cisco Aironet Client Utilities, Version 2.1 for Linux Contents This document contains the following sections: System Requirements, page 2 New and Changed Information, page 2 Installing ACU
More informationDownloading Device Packages
CHAPTER 2 Downloading Device Packages There are many devices available through CiscoView in CiscoWorks Windows. New device support can be added as package files to CiscoWorks Windows incrementally any
More informationCisco SPA112 Configuration Guide Using AccessLine SIP Trunks
Cisco SPA112 Configuration Guide Using AccessLine SIP Trunks Version 1.0 1 April 2013 Configuration Guide for the Cisco SPA112 with AccessLine Before you begin you will need to have active SIP Trunks from
More informationCopyright 2016 NetLinkz. All Rights Reserved.
Link Connect Manual Copyright 2016 NetLinkz. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
More informationInstalling, Migrating, and Uninstalling HCM Dashboard
CHAPTER 2 Installing, Migrating, and Uninstalling HCM Dashboard This chapter describes how to install, migrate data from HCM 1.0, and uninstall HCM Dashboard. It includes: HCM Dashboard Server Requirements,
More informationIf you are currently using a beta version of EPIC that is prior to 4.56 then you need to upgrade to version 5.00.
Instructions Introduction If you are currently using a beta version of EPIC that is prior to 4.56 then you need to upgrade to version 5.00. The following instructions provide a guide to downloading and
More informationOperating and Maintaining Cisco SPS
CHAPTER 3 Operating and maintaining Cisco SIP proxy server (Cisco SPS) involves starting and stopping the system and database, working with system logs, and backing up and restoring the system. This chapter
More informationEMS Installation. Workstation Requirements CHAPTER. EMS Lite (Windows 95/98) EMS NT (Windows NT 4.0)
CHAPTER 2 EMS Installation This chapter provides instructions for installing the Element Management System (EMS) software on a user workstation. Workstation Requirements The following sections list the
More informationIncident Response Platform Integrations BigFix Function V1.1.0 Release Date: October 2018
Incident Response Platform Integrations BigFix Function V1.1.0 Release Date: October 2018 Resilient Functions simplify development of integrations by wrapping each activity into an individual workflow
More informationL.A.M.P. Stack Part I
L.A.M.P. Stack Part I By George Beatty and Matt Frantz This lab will cover the basic installation and some configuration of a LAMP stack on a Ubuntu virtual box. Students will download and install the
More informationInstalling and Upgrading Cisco Network Registrar Virtual Appliance
CHAPTER 3 Installing and Upgrading Cisco Network Registrar Virtual Appliance The Cisco Network Registrar virtual appliance includes all the functionality available in a version of Cisco Network Registrar
More informationDestiny Library Manager
Destiny Library Manager Setting Up One Search Your teachers and students can take advantage of your school s subscription databases all in one place through Destiny One Search. One Search saves staff and
More informationDownloading Device Packages
CHAPTER 2 Downloading Device Packages New device support can be added as package files to CiscoWorks Windows incrementally any time after the initial installation of CiscoWorks Windows. To add device support
More informationUpgrading to BAMS Release 3.30
APPENDIXB Upgrading to BAMS Release 3.30 Revised: April, 2010, Introduction To upgrade Cisco BAMS software to Cisco BAMS 3.30, you must upgrade from BAMS 3.20. If you wish to upgrade from BAMS 3.13 to
More informationEdge Linux Installation Guide V 4.5
Edge Linux Installation Guide V 4.5 Table of Contents 1. About this Guide... 3 2. Pre-Requisites... 3 3. Installation... 3 4. Getting Started... 5 5. Licensing... 10 5.1. Online Activation... 11 5.2. Offline
More information1. Open VirtualBox and start your linux VM. Boot the machine and log in with the user account you created in Lab #1. Open the Terminal application.
CIT 210L Name: Lab #2 1. Open VirtualBox and start your linux VM. Boot the machine and log in with the user account you created in Lab #1. Open the Terminal application. 2. Listing installed packages -
More informationOperating and Maintaining Cisco SPS
CHAPTER 3 This chapter provides information on how to operate and maintain the Cisco SIP proxy server (Cisco SPS). Operation and maintenance involves starting and stopping the system and database, working
More informationInstalling and Upgrading the Cisco Video Surveillance Operations Manager (VSOM) Release 4.2.1
Installing and Upgrading the Cisco Video Surveillance Operations Manager (VSOM) Release 4.2.1 May, 2010 Contents This document provides the following information and instructions: Installation and Initial
More informationTroubleshooting the Installation
CHAPTER 5 This chapter provides information about basic troubleshooting tips and error messages that you may encounter during the installation of the Cisco Linux operating system or the Cisco IPICS server
More informationSuperLumin Nemesis. Getting Started Guide. February 2011
SuperLumin Nemesis Getting Started Guide February 2011 SuperLumin Nemesis Legal Notices Information contained in this document is believed to be accurate and reliable. However, SuperLumin assumes no responsibility
More informationClient TM 2.0 SP2 for Linux
Novell Client 2.0 SP2 for Linux Installation Quick Start Novell Client TM 2.0 SP2 for Linux 03/18/2009 2.0 SP2 QUICK START www.novell.com Installing the Novell Client for Linux This document explains how
More informationUsing the Offline Diagnostic Monitor Menu
APPENDIX B Using the Offline Diagnostic Monitor Menu During the boot process, you can access the Offline Diagnostic Monitor (Offline DM) Main menu. The Offline DM Main menu allows you to perform the following
More informationHelpAndManual_illegal_keygen Contactor Elite Autoresponder Installation Guide
HelpAndManual_illegal_keygen Contactor Elite Autoresponder Guide HelpAndManual_illegal_keygen Contactor Elite Autoresponder Autoresponder and Newsletter Delivery System To most web sites, their mailing
More informationInstallation and Configuration Guide (for Linux)
v5.2 MySQL 5.5 Installation and Configuration Guide (for Linux) Abstract This document is intended to be the installation and configuration guide for MySQL in addition to the procedures for upgrading,
More informationUsing Cisco Unified SIP Proxy Software
Using Cisco Unified SIP Proxy Software First Published: February 6, 2009 Last Updated: June 1, 2010 This chapter provides helpful tips for understanding and configuring Cisco Unified SIP Proxy software
More informationTransferring Files Using HTTP or HTTPS
Cisco IOS Release 12.4 provides the ability to transfer files between your Cisco IOS software-based device and a remote HTTP server using the HTTP or HTTP Secure (HTTPS) protocol. HTTP and HTTPS can now
More informationMaintaining Cisco Unity Connection Server
Migrating a Physical Server to a Virtual Machine, on page 1 Migrating from Cisco Unity 4.x and Later to Unity Connection 7.x and Later, on page 4 Replacing the Non-Functional Server, on page 5 Changing
More informationOpen SSL fix for Logjam Attack for Cisco Unified Intelligence Center
Open SSL fix for Logjam Attack for Cisco Unified Intelligence Center November 2015 Introduction This release notes contain important information about installation procedures for the Open SSL fix for Logjam
More informationDefinition Center Installation for Linux
Definition Center 10.2.0 - Installation for Linux These are instructions to install, configure, upgrade, start, stop and uninstall Definition Center 10.2.0 (DC) on a Linux system. In this installation,
More informationCiscoView CD Installation Instructions for AIX
CiscoView CD Installation Instructions for AIX CiscoView is a device management application that provides dynamic status, statistics, and comprehensive configuration information for Cisco Systems switched
More informationLicense Management. Overview. Smart Licensing. Overview, page 1
Overview, page 1 Overview Cisco UCS Central, release 1.4 introduces Smart Licensing, along with the traditional PAK based licensing. Cisco Smart licensing is simple, flexible and smart way of procuring,
More informationEView/400i IBM i (iseries-as/400) Management for Micro Focus Operations Manager i (OMi)
EView/400i IBM i (iseries-as/400) Management for Micro Focus Operations Manager i (OMi) Installation Guide Software Version: 7. 0 April 2018 Legal Notices Warranty EView Technology makes no warranty of
More informationLiveNX Upgrade Guide from v5.2.0 to v5.2.1
LIVEACTION, INC. LiveNX Upgrade Guide from v5.2.0 to v5.2.1 UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction
More informationEASYLAMP REDHAT V1.0 DOCUMENT OWNER: OUDHUIS, JONATHAN INGRAM MICRO CLOUD EUROPE
EASYLAMP REDHAT V1.0 DOCUMENT OWNER: OUDHUIS, JONATHAN INGRAM MICRO CLOUD EUROPE CONTENTS 1 Introduction... 2 2 Creating and configuring a virtual machine... 3 3 Installing Apache... 10 4 Installing MariaDB...
More informationUnified CVP Migration
If there is a change in platform of a later release of Unified CVP, migration from the existing release to the later release is required. For example, moving from Unified CVP 8.5(1) to Unified CVP 10.0(1)
More informationSpamJadoo Installation Guide
DIL/SpamJadoo/Deployment /Ver1.1 1 TABLE OF CONTENTS 1. Introduction 3 2. Prerequisite & Initial configuration. 4 Minimum Hardware Requirements 4 Minimum Software Requirements. 4 3. Software Installation.
More informationUnified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX.
This chapter explains how to upgrade Unified CCX. Types, page 1 Important Considerations for Upgrade, page 3 Preupgrade Tasks, page 4 Scenarios, page 5 COP File, page 8 Upgrade Unified CCX Using Web Interface,
More informationTroubleshooting the Installation
APPENDIX A Troubleshooting the Installation This appendix provides troubleshooting information for Essentials installation and setup, and contains the following sections: If the Installer Window Does Not
More informationCreated September 2010
Created September 2010 The application note will show you how to install a Star Micronics printer on Debian 5.0. While these directions show to install a TSP650, these directions suffice for installing
More informationFtp Command Line Manual Windows Username Password Linux
Ftp Command Line Manual Windows Username Password Linux Midnight Commander is a console based full-screen text mode File Manager that allows you to copy, MC has many features which are useful for a user
More informationSOA Software API Gateway Appliance 6.3 Administration Guide
SOA Software API Gateway Appliance 6.3 Administration Guide Trademarks SOA Software and the SOA Software logo are either trademarks or registered trademarks of SOA Software, Inc. Other product names, logos,
More informationPearl Echo.Suite Quick Start Installation Guide
WORKSTATION SERVER Pearl Echo.Suite Quick Start Installation Guide Your initial test setup should take between 5 and 15 minutes. For detailed automated deployment instructions and configuration settings
More informationFtp Command Line Manual Windows User Password
Ftp Command Line Manual Windows User Password SSH Guide SFTP on Mac OS X SFTP on Windows The most straight forward way to use SFTP is through the command line. a command line, you can alternately use an
More informationFilr 3.3 Desktop Application Guide for Linux. December 2017
Filr 3.3 Desktop Application Guide for Linux December 2017 Legal Notice For information about legal notices, trademarks, disclaimers, warranties, export and other use restrictions, U.S. Government rights,
More informationRed Hat JBoss Developer Studio 11.3
Red Hat JBoss Developer Studio 11.3 Installation Guide Installing Red Hat JBoss Developer Studio Last Updated: 2018-05-01 Red Hat JBoss Developer Studio 11.3 Installation Guide Installing Red Hat JBoss
More informationBefore Installing Broadband Access Center
CHAPTER 2 This chapter describes the requirements and dependencies for installing Cisco BAC successfully. This chapter describes: BAC Components, page 2-1 Installation and Startup Process, page 2-2 Database
More informationData Manager. Scheduling Data Backup CHAPTER
CHAPTER 9 To access Data management tasks, log into the system (see Logging In section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears. From the Tools page, click. The
More informationDownloading and Managing Firmware in Cisco UCS Central
Downloading and Managing Firmware in Cisco UCS Central This chapter includes the following sections: Downloading Firmware from Cisco.com, page 1 Firmware Library of Images, page 2 Configuring Firmware
More informationV-locity Installation
V-locity Installation Installing V-locity on Your Network V-locity can be installed in a variety of ways. If you are installing V-locity onto a single computer, no special actions are needed. Simply double-click
More informationConfiguring Web Server Devices
CHAPTER 13 To use web logging with MARS, you need to configure the host, the webserver, and MARS. MARS can process up to 100 MB of web log data per receive from your host. Web logging is only supported
More informationUsing Cisco Unity Express Software
Using Cisco Unity Express Software Last Updated: May 1, 2006 This chapter provides helpful tips for understanding and configuring Cisco Unity Express software using the command-line interface (CLI). It
More informationPage 1 Podcast Workshop Instructions for creating a podcast using Podifier.
Podcast Workshop Instructions for creating a podcast using Podifier. Bg: make mp3, make web page. Plan in ppt. put screen shots in ppt. Step 1. Launch the application Podifier from the Programs menu or
More informationManaging Software Images Using Software Management
CHAPTER 8 Managing Software Images Using Software Management Manually upgrading your devices to the latest software version can be an error-prone, and time-consuming process. To ensure rapid, reliable
More informationEMC Greenplum Data Computing Appliance to x Software Upgrade Guide. Rev: A02
EMC Greenplum Data Computing Appliance 1.2.0.1 to 1.2.1.x Software Upgrade Guide Rev: A02 Copyright 2013 EMC Corporation. All rights reserved. EMC believes the information in this publication is accurate
More informationSet Up Certificate Validation
About Certificate Validation, on page 1 About Certificate Validation On-Premises Servers Cisco Jabber uses certificate validation to establish secure connections with servers. When attempting to establish
More informationPerceptive Process Mining
Perceptive Process Mining Installation and Setup Guide Version: 2.8.x Written by: Product Knowledge, R&D Date: September 2016 2014-2016 Lexmark. All rights reserved. Lexmark is a trademark of Lexmark International,
More informationCertification. RPM, Boot Loaders, and Kickstart
Certification RPM, Boot Loaders, and Kickstart UNIT 7 RPM, Boot Loaders, and Kickstart 1 UNIT 7: Objectives Upon completion of this unit the student should be able to: Use RPM to install, remove, update,
More informationINDEX. Symbols. .cshrc file modifying 2-8.profile file modifying 2-8.rhosts file for RCP 5-17
INDEX Symbols.cshrc file modifying 2-8.profile file modifying 2-8.rhosts file for RCP 5-17 A adding inventory data 5-4 admin role changing login 4-7 changing login password 4-8 default login username 4-5
More informationDay 1 IT Network Systems Administration Trade 39 WSC 2011 London
1/9 worldskills 2011 trade 39 - day1 Day 1 IT Network Systems Administration Trade 39 WSC 2011 London 2/9 worldskills 2011 trade 39 - day1 Overview 1 EXAM...3 1.1 CONTENTS...3 1.2 INTRODUCTION...3 1.3
More informationInstalling Cisco Broadband Access Center on Linux
CHAPTER 4 Installing Cisco Broadband Access Center on Linux This chapter explains the procedure and sequence of event for a successful installation of Cisco Broadband Access Center (Cisco BAC) on Linux
More informationTroubleshooting Cisco APIC-EM Multi-Host
The following procedures may be used to troubleshoot a Cisco APIC-EM multi-host configuration: Changing the Settings in a Multi-Host Cluster, page 1 Removing a Single Host from a Multi-Host Cluster, page
More informationLinux Quick Installation Guide
2009 Aradial This document contains proprietary and confidential information of Aradial and shall not be reproduced or transferred to other documents, disclosed to others, or used for any purpose other
More informationInstallation Guide. Contents. Overview. Dell SonicWALL Advanced Reporting Installation Guide. Secure Remote Access. SonicOS
Secure Remote Access SonicOS Contents Overview...1 Server Requirements...2 Licensing and Activation...2 Installing and Upgrading...4 Collecting Dell SonicWALL Aventail Access Logs...8 Initial Setup of
More informationVolume SKYSWITCH. Configuring an Edgemarc Nov Configuring An Edgemarc
Volume 1 SKYSWITCH Configuring an Edgemarc Nov 2017 Configuring An Edgemarc SKYSWITCH Creating An Edgemarc SkySwitch 608 Robin Road Lakeland FL 33803 Phone 747-900-5401 Fax 863-647-5192 Table of Contents
More informationNetwork Installation Guide
Rosetta Stone Node-Locked License Network Installation Guide This Guide Includes: Storing Rosetta Stone Language Data... 1 Installing the Student Management System... 2 Setting Up the SMS... 3 Installing
More informationUnified CCX Upgrade. Unified CCX Upgrade Types. This chapter explains how to upgrade Unified CCX.
This chapter explains how to upgrade Unified CCX. Types, page 1 Important Considerations for Upgrade, page 2 Preupgrade Tasks, page 4 Scenarios, page 4 COP File, page 9 Upgrade Unified CCX Using Web Interface,
More informationRed Hat Developer Studio 12.9
Red Hat Developer Studio 12.9 Installation Guide Installing Red Hat Developer Studio Last Updated: 2018-10-08 Red Hat Developer Studio 12.9 Installation Guide Installing Red Hat Developer Studio Supriya
More informationINDEX. call forwarding
INDEX A access control general concepts 1-17 GUI configuration 2-4 manual configuration B-19 access control lists (ACLs) 1-16 access log 1-11, 1-12 accounting services basic concepts 1-11, 1-12 GUI configuration
More informationInstalling and Upgrading Cisco Video Surveillance Manager Release 6.3
Installing and Upgrading Cisco Video Surveillance Manager Release 6.3 Overview This document provides information about installing Cisco Video Surveillance Manager (VSM), which includes Cisco Video Surveillance
More informationAdditional Management Tools and Interfaces
CHAPTER 13 The SCA BB Service Configuration Utility, page 13-1 The SCA BB Real-Time Monitoring Configuration Utility, page 13-5 The SCA BB Signature Configuration Utility, page 13-8 Overview of SNMP, MIB,
More informationInstalling EMC NaviSphere
, page 1 To communicate with VNX, Cisco UCS Director supports Windows-based EMC NaviSphere and Linux-based EMC Navisphere. Before using NaviSphere, you must install and configure a Secure Shell (SSH) server
More informationMoveIT DMZ User Guide
MoveIT DMZ User Guide December 10, 2014 1 Index MoveIT DMZ Introduction... 1 Initial Login and Password Change... 2 Navigation... 8 Installation Instructions for the Upload / Download Wizard... 12 Uploading
More informationOnly applies where the starting URL specifies a starting location other than the root folder. For example:
Allows you to set crawling rules for a Website Index. Character Encoding Allow Navigation Above Starting Directory Only applies where the starting URL specifies a starting location other than the root
More informationLocate your Advanced Tools and Applications
. phpmyadmin is a web-based application used to manage a MySQL database. It is free and open-source software. We have modified phpmyadmin so that it functions without errors on a shared hosting platform.
More informationExpressCluster for Linux Ver3.1 Database Agent rd Revision
ExpressCluster for Linux Ver3.1 Database Agent 2005.12.28 4 rd Revision Revision History Revision Revision Date Revision Page 1 2005/05/30 The 1 st Revision was created. 2 2005/07/22 Description The following
More informationOnline Backup Client User Manual
Online Backup Client User Manual Software version 3.21 For Linux distributions October 2010 Version 2.0 Disclaimer This document is compiled with the greatest possible care. However, errors might have
More informationInstalling and Upgrading Cisco Video Surveillance Manager Release 6.3.1
Installing and Upgrading Cisco Video Surveillance Manager Release 6.3.1 Overview This document provides information about installing Cisco Video Surveillance Manager (VSM), which includes Cisco Video Surveillance
More informationHow do I configure my LPL client to use SSL for incoming mail?
How do I configure my LPL email client to use SSL for incoming mail? When you begin using your modern graphical email client program (e.g., Thunderbird, Mac Mail, Outlook), it will present a series of
More informationTransport Gateway Installation / Registration / Configuration
CHAPTER 4 Transport Gateway Installation / Registration / Configuration This chapter covers the following areas: Transport Gateway requirements. Security Considerations When Using a Transport Gateway.
More informationPaperless Office: Period End Processing LM-1020
Paperless Office: Period End Processing LM-1020 Overview This Extended Solution allows printing of MAS 90 MAS 200 Period End reports in PDF Format and provides a Viewer utility for the viewing and deleting
More informationChapter 2 WEBLOGIC SERVER DOMAINS. SYS-ED/ Computer Education Techniques, Inc.
Chapter 2 WEBLOGIC SERVER DOMAINS SYS-ED/ Computer Education Techniques, Inc. Objectives You will learn: Domain - concept and implementation. Content of a domain. Common domain types. Production versus
More informationNNMi Integration User Guide for CiscoWorks Network Compliance Manager 1.6
NNMi Integration User Guide for CiscoWorks Network Compliance Manager 1.6 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000
More informationUsing the aregcmd Commands
CHAPTER 2 This chapter describes how to use each of the aregcmd commands. The Cisco Access Registrar aregcmd command is a command-line based configuration tool. It allows you to set any Cisco Access Registrar
More informationConfiguration Manager
CHAPTER 7 This chapter describes how to perform routine Cisco VXC Manager configuration management tasks using the Administrator Console. It provides information on managing the configuration settings
More informationFtp Get Command Line Linux Proxy Settings
Ftp Get Command Line Linux Proxy Settings How to change system proxy settings from the command line on Ubuntu If you want to change HTTPS/FTP proxy to manual as well, use these commands: Do you want to
More informationCompiere 3.3 Installation Instructions Windows System - Oracle Database
Compiere 3.3 Installation Instructions Windows System - Oracle Database Compiere Learning Services Division Copyright 2010 Consona ERP, inc. All rights reserved www.compiere.com Table of Contents Compiere
More informationInstalling Prime Home
CHAPTER 5 This chapter explains how to install Prime Home in your network infrastructure. It includes: Installing the Configurator Tool, page 5-1 Deploying the Prime Home Configuration, page 5-2 Installing
More information