Hardware Specification... 3 Parts and Functions Quick Install / Start Main Console... 14

Transcription

1

2 Hardware Specification... 3 Parts and Functions... 5 R-09A / R-16A Package check list:... 5 R-36A Package check list:... 7 Quick Install / Start Main Console System Information: Screen Division: Sub-screen : Snapshot: Audio volume control: System Setting: System Management: Event Setting: Log Viewer: Camera List: Setup Wizard: Schedule Monitor: Two way audio: Audio volume adjust: PTZ control: E-Map: Playback Search history record data: Playback control button(s): Convert to AVI file: Backup: Playback Status: Sequential Search: Playback Styles: Remote Service Installation: Login: Live Preview: Playback: Search history recorded file(s): Playback control button(s): /113

3 3.4.3 Convert to AVI file: Backup: Switch audio play mode: Playback setting: Snapshot dialog: Playback status: Operation with sub-screen: Remote System Setting: Camera setting: Schedule setting: Network setting: System setting: User setting: Motion Config: Address Book: Notification: Remote System Management: Maintenace: Samba server: Remote Event Setting: Add a new Event: Modify exist Event schedule or Action: Delete exist Event schedule or Action: Action Types: Utility Event file viewer: Appendix /113

4 Hardware Specification Model LAN Port Video Output Audio Input R-09A(9CH NVR) / R-16A(16CH NVR) 1 x Giga RJ-45 Ethernet port VGA D-sub + HDMI MIC x 1 (phone jack 3.5mm) Audio Output Phone Jack 3.5mm x 1 HDD SATA HDD Up to 2TB x 2 ESATA Backup 1 ESATA USB Mass Storage LED Indicator System Ready, HDD R/W, LANx1, Record Schedule x1, Event Schedule x1, Alarm x1, Camera status x1, DI x4, DO x4 USB Sensor In / Alarm Out Button H/W WDT RTC Buzzer Power 1 For Mouse / 1 For Backup 4 Digital in / 4 Digital out Factory Default Reset H/W Watch Dog RTC 1 Buzzer External Adaptor, AC V/in, DC12V(4A) Temperature 0~40 Humidity Housing Dimensions Weight Certification Max bit-rate 0%~85% R.H. 2 HDD version 330 x 57 x 252 mm 1455g CE, FCC 48Mbps(R-09A) / 80Mbps (R-16A) 3/113

5 Model SoC LAN Port Video Output Audio Input R-36A ARM Cortex A17 4 core + ARM Cortex A7 2 x Giga RJ-45 Ethernet port (Fail over) VGA D-sub + HDMI MIC x 1 (phone jack 3.5mm) Audio Output Phone Jack 3.5mm x 1 HDD SATA HDD Up to 6TB x 8 E-SATA E-SATA x 1 Backup USB Mass Storage LED Indicator System Ready, HDD R/W, LANx1, Record Schedule x1, Event Schedule x1, Alarm x1, Camera status x1, DI x4, DO x4 USB Sensor In / Alarm Out Button USB 2.0 x2 + USB 3.0 x1 4 Digital in / 4 Digital out Factory Default Reset Fan Fan x 1 H/W WDT RTC Buzzer Power H/W Watch Dog RTC 1 Buzzer Internal Power Supply, AC V/in, Max 350W DC/out Temperature 0~40 Humidity Housing Dimensions Weight Certification 0%~85% R.H. 8 HDD version 435x417x98 mm (WxDxH) Net weight: 6.06 kg CE, FCC 4/113

6 Parts and Functions R-09A / R-16A Package check list: 1. R-09A or R-16A X V / 4A adapter X1 3. SATA data cord X2 4. SATA power cord X2 5. Hard disk holder X4 pcs 6. Quick install guide X1 7. Manual disc X1 Front: Status LED: PWR: LED on when system is ready. HDD: LED on when Hard Disk is reading or writing. LAN: LED on when network is on communication. REC: LED on when Record schedule is on. Event: LED on when Event detection schedule is on. Alarm LED: Alarm: LED on when Hard Disk write error. CAM: LED on when system have camera disconnected. Digital Input LED: LED 1~4: LED on when Digital Input X is closed. 5/113

7 Digital Output LED: LED 1~4: LED on when Digital Output X is closed. USB: For connect USB stick or mouse. Rear: Power Switch : Switch to for Power on. Switch to O for Power off. DC Adaptor In: Insert 12VDC / 2A adaptor here. I/O interface : Look from back side. 12V out RS485 D+ RS485 D- DI0 ~ DI3 Ground DO0~DO3 e-sata port: Connect to e-sata storage device. HDMI port: Insert HDMI connector here. VGA port: Insert VGA connector here. LAN port: Giga bps LAN port. USB: For connect USB stick or mouse. 6/113

8 1 Audio Out port: Insert speaker connector here. 2 Mic In port: Insert Microphone connector here. R-36A Package check list: 1. R-36A X1 2. Power cord X1 3. SATA data cord X8 4. Rack mount bracket X2 pcs 5. Quick install guide X1 6. Manual disc X1 Front: Status LED: PWR: LED on when system is ready. HDD: LED on when Hard Disk is reading or writing. LAN: LED on when network is on communication. REC: LED on when Record schedule is on. Event: LED on when Event detection schedule is on. Alarm LED: Alarm: LED on when Hard Disk write error. 7/113

9 CAM: LED on when system have camera disconnected. Digital Input LED: LED 1~4: LED on when Digital Input X is closed. Digital Output LED: LED 1~4: LED on when Digital Output X is closed. USB: USB2.0 x 2: For connect USB stick or mouse. Rear: LAN1/ LAN2: Fail over: 1. If both port were connected to ethernet, system will use LAN1 first. 2. When LAN1 was failed, system will change to LAN2. Power Switch : Switch to for Power on. Switch to O for Power off. I/O interface : Look from back side. 12V out RS485 D+ RS485 D- DI0 ~ DI3 Ground DO0~DO3 e-sata port: Connect to e-sata storage device. HDMI port: Insert HDMI connector here. 8/113

10 VGA port: Insert VGA connector here. LAN port: Giga bps LAN port. USB 3.0: For connect USB stick to backup. Audio Out port: Insert speaker connector here. Mic In port: Insert Microphone connector here. AC-In: Please switch current voltage with 115V or 230V. 9/113

11 Quick Install / Start SecuGuard Mini Quick Install / Start System Configuration: 1. Install the Hard Disk device, and make sure SATA cable and Power cable are connected between main board and Hard Disk. 2. Turn on the NVR s Power switch, and wait until system boot process finished. 3. When first time power on, setup wizard will start, please configure language and network, and then click "Next Page". 4. Configure current time by manual or Synchronization with NTP server, select time-zone and daylight saving time, and click "Next Page". 5. Management Hard Disk list, if have any disk was unformatted, system will remind you to format Hard Disk. 10/113

12 Quick Install / Start SecuGuard Mini 6. Search and add cameras or you could remove installed camera, you could quick management camera install list here 11/113

13 Quick Install / Start SecuGuard Mini 7. After setup wizard finished, NVR will be need first time login, default User name is admin and Password is none. Playback: 1. Click for enter playback page, system will auto start play with one minute ago data. 2. You could drag the time bar below the video window for seek play time. 3. click button for expand record status window 12/113

14 Quick Install / Start SecuGuard Mini 4. Click for approach select playback date dialog, or you could click buttons for change playback date. 5. Click to start playback. 13/113

15 1. Main Console SecuGuard Mini 1. Main Console This is the main control panel of system, to provide live stream preview, system setup, Two-way audio, playback, volume control, snapshot, start or stop monitor, and PTZ controls. 14/113

16 1. Main Console 1.1 System Information: System Information : Date Time Weekday Schedule Recording Event Alarm status Login / Logout : Hard Disk available size 1. Logout: Logout current User 2. Version: Display version number. 15/113

17 1. Main Console 1.2 Screen Division: Assign the preview screen to expected layout division by clicking these buttons. Switch to Division 1. Switch to Division 4. Switch to Division 9. Switch to Division 16. Switch to Full screen, and click mouse right button to cancel Full Screen 16/113

18 1. Main Console 1.3 Sub-screen : Digital Zoom: Sub-screen window supported digital zoom, operation step as follow, 1. Click on preview image for switch current focus channel. 2. Scroll the mouse wheel, forward for digital zoom-in, and backward for zoom-out. 3. Switch division mode will reset digital zoom status to default. Popup Menu: Click mouse right button, select an option from the popup menu. 1. Change current channel display camera. 2. Change current division mode. 3. Switch current channel display ratio mode. 4. Switch to Full Screen mode / Cancel Full Screen mode. 5. Reset all channels to default camera list. 6. Snapshot current display. 7. Enable / Disable Auto Switch. 8. Add new division group 1.4 Snapshot: Click to take a snapshot to the hard-disk, you can management snapshots at system management snapshot page. 17/113

19 1. Main Console 1.5 Audio volume control: Click audio button to switch between mute or not. System is on non-mute mode. System is on mute mode 1.7 System Setting: Click setup button and select System Setting from pop-up menu to approach System setting dialog Camera page at System setup dialog: 18/113

20 1. Main Console Auto Setting: Click the Auto Setting button for auto add cameras to system, maximum number of cameras are depend on NVR s model. After click the button, system will show the fuzzy search filter dialog, you could input the search filter by model name, IP address or MAC address, or you could keep them empty for search all cameras. Auto setting could insert intranet s cameras, even them behind of several switch hubs, or you could just direct insert cameras on NVR s switch hub, then click Auto Setting button to add them into system. Through Auto Setting function, you won t need to key-in any network IP or sub-mask parameter, you only need to click Auto Setting button to finish insert IP camera job Template Setting: When you use Auto Setting or add a new 19/113

21 1. Main Console camera, system will read the camera template from Template Setting for fill the camera parameter. After you confirm the template, in most case, you will no longer need to setting camera s parameter again. You could setting the quick template from camera setting page, in most case you only need set the camera s resolution and frames per second. If you need set more detail template, please click the Advanced button to approach the template setting dialog. Resolution: The new camera will try to fit selected resolution, if you select Max, camera will use maximum resolution, or you could select another resolution, system will choose a near one resolution of camera. FPS: Set the frames per second of camera, system will try to set a near or equal FPS to camera. Rate Control: Set the rate control algorithm of new camera. Quality: If you select the EVBR for new cameras, you could set then VBR quality here. Account: Setup the default login camera user account. Password: Setup the default login camera password Camera list : 20/113

22 1. Main Console List all inserted IP camera s name, click the row of camera to display detail information and live streaming video. Make the check box on for enable the camera, otherwise the camera will be disabled. This camera is enabled. This camera is disabled. If the camera is disabled, NVR will not connect to it, that will keep the camera setting in system, without use any system performance and won t add any error messages. Switch Camera sequential: Click mouse right button on the camera, and select another camera in the popup menu, system will switch these two camera s setting. Quick Setup: 1. Select a camera 2. Click Quick Setup button. 3. Select a action: 1 Copy to: Copy selected camera s setting to all channel or single channel 2 Switch To: Switch selected camera and target camera sequential position. 3 Remove all: Remove all camera setting Camera setting : Key-in or modify camera s information here, 21/113

23 1. Main Console Vendor: Select camera s vendor or use Onvif protocol. Detect: Check camera available and receive camera model name. Camera Name: Key in camera name at here. IP Address: Key-in camera s IP address. HTTP port: Set camera s HTTP port, default is 80. RTSP port: Set camera s RTSP port, For TCP streaming, default is 554. Onvif Authentication: Select connect to camera with WSSE authentication or without authentication. User Name: Set the User name for login camera. Password: Set the Password for login camera. Set Parameter: Select stream profile / resolution for preview and recording. Select FPS for display and recording frame rate. Enable Audio for receive audio stream, enable it when you need live audio and record audio with record files. Enable Audio Record for record audio with record files. Enable Two Way Audio when you need send voice data to IP camera. Adjust Input and Output gain value with IP Camera. 22/113

24 1. Main Console *The parameter dialog are different in each vendor, it is depend on camera s capability. Add Camera: 1. Click Search button and wait for search job finished. 2. Select a camera on search result list. 3. Preview live streaming video at preview window to confirm current camera. 4. Click Add button to add selected camera into system. Delete Camera: 1. Select a camera from installed camera list. 2. Click Delete button to remove selected camera from list. Update Camera setting: 1. Select a camera from installed camera list. 2. Modify camera s setting at each setting fields. 3. Click Update button to save modified result. Updated setting will write to disk after click OK at bottom of page. If you click Cancel button to leave setting page, system will drop all your modified setting. Clear button: Clear all setting fields Search Camera: Click Search button, system will list all camera can be searched in Search List, you can click on each row to preview live video streaming. You can click on the header column for sort current row data. 23/113

25 1. Main Console Recording page at System setup dialog : System support weekly schedule recording, you could define different schedule with each camera and each weekday at here. Configure recording schedule step: 1. Select a camera: Click on camera list to select a camera to configuration. 2. Select a weekday: Click on a weekday bar, system will list time periods with this weekday. 3. Configure time period: Add new period: Drag mouse cursor on blank area, or click Insert button. Configure period setting: After new period was inserted, system will pop-up period setting dialog, Fill start time and end time, and select pre-alarm and post-alarm time if set this period to motion detection record mode. Pre-alarm or post-alarm seconds maximum value is 60 seconds. 4. Select a record mode: Select a record mode from Round the clock or Motion detection, DI detection or Event Detection for this period. If you select the DI detection, you should select a DI input source and define alarm condition. 24/113

26 1. Main Console 5. Modify exist record schedule period: Click a period form weekday bar or select a period from list, then click Configure button. 6. Remove a record schedule period: Select a period from weekday bar or list, then click Delete button. 7. Copy a period to all: Select a period from weekday bar or list, then click Copy button, system will set copy current selected weekday s periods to all weekdays Network page at System setup dialog : DHCP setting: Checked the Obtain IP address automatically (DHCP) to enable auto get IP from DHCP server. MAC address: Display MAC address of this NVR. Fixed IP setting: If disable DHCP function, you should key-in IP setting here, and you can click Test button to detect IP conflict. DNS setting: Checked Obtain DNS from DHCP for get DNS setting from DHCP server, it only works on DHCP was enabled. If Obtain DNS from DHCP was disabled, you could key-in DNS server IP in the text box. 25/113

27 1. Main Console PPPOE Setting: Enable / Disable: Select from the radio boxes to enable or disable PPPOE function. User Name: Key-in user name to login PPPOE server here. Password: Key-in login PPPOE server password here. IP address: Display current IP address get from PPPOE server. Subnet Mask: Display current subnet mask get from PPPOE server. Gateway: Display current gateway get from PPPOE server. Status: Display PPPOE status. UPNP Setting: Display UPnP friend name on network. UPnP Traversal Setting: Enable UPnP Traversal to auto request port mapping with router, and define maximum and minimum port value here. Server Setting: Enable server option for start HTTP and RTSP server, after remote service started, Users could be connect remote service by IE browser. HTTP Port: Set HTTP service port here. RTSP Port: Set RTSP service port here. RTSP over HTTP: Enable RTSP over HTTP function, the remote live streaming will use HTTP protocol and HTTP port. 26/113

28 1. Main Console DDNS: 1. Enable DDNS check box. 2. Select a DDNS server. 3. Key in DDNS domain name. 4. Key in login DDNS service s account and password. 5. Click test button to connect DDNS service, and system will display current public IP with domain name later. DHCP Server: 1. Enable DHCP Server check box. 2. Key in a start ip, or use default " ". 3. Select IP Pool from 1 to 253,or use default Click Lease List button to show leased IP list System page at System setup dialog : Device Info: Model Name: Display Model Name. Device Title: Key-in device title here. Software version: Display current firmware version. Date Time: Server Date & Time: Display current system date-time. 27/113

29 1. Main Console Adjust: Manual Setting: Click setting to approach date-time setting dialog, and select current date and time now, click OK to change system time or click Cancel button to abort configuration. Synchronize with NTP: Enable synchronize date-time with NTP service. NTP Server: Key-in NTP server IP or domain name, if you use the domain name to connect NTP server, the DNS service must be enabled. NTP Sync Interval: Select a value to set interval of each time synchronization with NTP service. Time Zone: Select the time zone of NVR location. Daylight saving: Enable or disable daylight saving mode. Daylight saving Start Time: Configure daylight saving start time, it works with daylight saving mode enabled. Daylight saving End Time: Configure daylight saving end time, it works with daylight saving mode enabled. Daylight saving Offset: Configure daylight saving offset time with current time, it works with daylight saving mode enabled. Auto Login: Enable auto login mode to login with defined user name and password when system boot up. User: Key-in auto login user name. Password: Key-in auto login password. System Setting: Enable Auto full screen to switch to full screen mode when system boot up. Change display language from language combo box. Adjust Auto switch interval seconds. 28/113

30 1. Main Console DIPS Display device DIPS ID. Click Test button for test connection with DIPS server. Recycle Days: Select log keep days. Auto install: Enable auto install found camera User page at System setup dialog : You could management user account to allow each function accessible or not, login system by user account could prevent user use some functions without permission. User Config: User: Edit User name at here. Password / Confirm Password: Edit User login password at here. 29/113

31 1. Main Console Group: Select user s login group. Description: Key-in description of this user. Monitor: Select which cameras that current edit user could preview live streaming. Playback: Select which cameras that current edit user could playback history record data. Record: Enable this user could start and stop record job. Setting: Enable this user could entry system setting fuction. PTZ: Enable this user could operator PTZ functions. Two way audio: Enable this user could start and stop two way audio. Add User: After key-in user information, click Add button to insert new user account into setting. Modify User: Select a user first, after modified user information, you must click Modify button to update user information to setting. Delete User: Select a use first, then click Delete button to remove selected user from setting. 30/113

32 1. Main Console Motion Detection page at System setup dialog : You could configure each camera s motion detection at this page. Select a camera: Click on camera list to select a camera to management motion detection setting. Add new motion detection: Click Add button to insert new motion window, the new window will inserted at left-up corner. Enable motion window: Check the window name to enable motion detection. Modify motion detection area: Move mouse cursor to motion window border, and drag cursor to resize motion window. Drag mouse cursor on motion window to re-position of motion window. Remove motion window: Click on motion window or window s name to set focus window, then click Delete button to remove it. Modify motion parameter: Click on motion window or window s name to set focus window, then edit it s motion parameters, you must click Update button to save modified values, or the settings will be lost. Name: Key-in motion window s name. 31/113

33 1. Main Console Include / Exclude: Include meets system will detect motion inside of window area. Exclude meets system will detect motion outside of window area. Object Size: Set motion detection object size value between 0 and 100, bigger value meets motion alarm will harder to be triggered. Sensitivity: Set motion detection sensitivity value between 0 and 100, bigger value meets motion alarm will easier to be triggered Address Book setup dialog: Add and other information to address book for send alarm . Key-in user s information and click Add button to add to address book list, or click on user s name from list, and modify user s information then click Update button to save to disk. Select a user then click Delete button for remove a user from list. 32/113

34 1. Main Console Notification dialog : Key-in notification server information at here, when event monitor is set and alarm is triggered, system will send notification to the server. SMTP Config: SMTP server : SMTP sever IP or domain name. SMTP port: SMTP service port number. User Name: Login SMTP server user ID. Password: Login SMTP server Password. From: sender s name Subject: Mail s Subject. Body: Mail s body content. Retry: Retry how many times when send mail fail. 33/113

35 1. Main Console Send Interval: Set the interval of each time send mail out. Send without Picture: Do not attach picture with notification mail. Server Require Authentication: The server need Authentication. Server Require Secure Connection: The server need SSL connection. Send Test Button: Send out a test mail for test Server information is correct. HTTP Config: HTTP IP: HTTP server s IP or domain name. HTTP Port: HTTP server s service port. HTTP User Name: Login HTTP server s user account. HTTP Password: Login HTTP server s password. HTTP CGI: HTTP server receive notification CGI path FTP Config: FTP Server: FTP server IP or domain name. FTP port: FTP server service port. User Name: Login FTP server account. Password: Login FTP server password. Path: Upload picture or video path. 34/113

36 1. Main Console Retry: Retry how many times when upload fail. Recycle Days: Keep upload failed picture or video how many days. TCP Config: TCP server: TCP server IP or domain name. TCP port: TCP service port number. 1.8 System Management: Click setup button and select System Management from pop-up menu to approach System setting dialog. 35/113

37 1. Main Console System Management: Resolution: Change monitor current display resolution, please confirm change result, or system will recover old resolution after 15 seconds. Style: Select Main page display style, the style will changed after click OK button. Normal Style: Friendly graphic GUI interface. 36/113

38 1. Main Console Simple Style: Simple style will get the maximum live streaming images display area. Professional Style: DI Tree List: Display local and all camera s DI status, if camera does not have DI, it will not add to the DI list. DO Tree List: Display and control local and camera s DO status, if camera does not have DO, it will not add to the DO list. PTZ Control Panel: Preset Combo box: Select a preset with focus camera, camera will go to the preset position. 37/113

39 1. Main Console Delete Button: Remove current selected preset record. Preset Add: Key-in preset name and click Add button will add a new preset position record to focus camera. PTZ control buttons: Click PTZ direction buttons to control camera pan / tilt / home. Group Preview: Switch current live division to specific group division. E-Map: Display camera s position. Advanced Style: Base on professional style, add event log and system log viewer, these control will display newest record in log. Division Tool Box: Switch division buttons: Reset division to default: Full Screen: Auto Switch: 38/113

40 1. Main Console Snapshot: Change display ratio: Event Log: Display newest 5 records in event log. Start Time: Display the start time of event. End Time: Display the end time of event, if the event was not closed, this field will keep empty. Log Type: Display the Event Type. Device: Local: NVR s event. CXXX: camera s event. Input: Display event trigger by which DI input, -1 means it is not a DI event. Key: Display event Key string. System Log: Time: Log Time. Log Type: Log type string. Remark: Extra log description. Image: Adjust monitor Brightness, Contrast, Saturation, Sharpness, Hue values, to get best display quality. 39/113

41 1. Main Console Maintenance: Default Setting: Reset all setting to factory default value. Backup Setting: Export backup setting file to remove-able storage device. Restore Setting: Restore a backup setting file from remove-able storage device. Firmware Upgrade: Select a firmware file from remove-able storage device, then click Firmware Upgrade button to begin update firmware job. System Restart: Restart NVR system. Audio: Adjust audio input or output gain value. 40/113

42 1. Main Console Disk Management: You could management all storage devices at here. Device list: Display all devices were detect on NVR, and their information. Mount / Un-Mount button: Mount or Un-Mount USB stick. S.M.A.R.T button: Display the Hard Disk S.M.A.R.T status. Format Button: Select storage devices with check box, and click Partition button, system will remove all data and partitions on selected device, and create a new partition. Partition list: Display all partitions of selected device, and their information. Click Format button will format selected partition to ext4 format, all data will be lost. 41/113

43 1. Main Console Raid Management RAID mode: None: Clear all RAID configuration. RAID 0: Best performance of storage read /write process,. RAID 1: Mirror mode, all data will backup each other by smallest storage size. RAID 5: RAID 5 is RAID configuration that uses disk striping of parity. Format: When RAID was created, you need format it for recording. UnKnow: If you add new disk into NVR after create RAID, these disks will display at here, You could click Auto-Setting button to add these disks to RAID for spare disk. 42/113

44 1. Main Console Snapshot: Management all snapshot of hard disk and remove-able device, and could backup snapshot images to remove-able device. Source Snapshot List: Search snapshot image: 1. select a hard disk path 2. select a time period 3. click search button 4. The search result will display in the list box. 5. select a snapshot file name, the snapshot image will display on right Copy: Click Copy button will copy selected snapshot file to remove-able device. Delete: Click Delete button will delete selected snapshot file. Destination Snapshot List: 1. Select a remove-able device path 2. system will show snapshot file s name of selected folder 3. select a snapshot file name, the snapshot image will display on right Delete: Click Delete button will delete selected snapshot file. 43/113

45 1. Main Console Event Snapshot: Management Event snapshot files at here. Event Snapshot: Search: Device: Select the Snapshot device ID. Event Type: Select trigger snapshot event type. Input: Select DI input port number. Time: Select search time period. Result table: Time: Event Time: Event Type: Triggered Event Type. Input: Event DI port number, if not DI event will fill -1. Device: Event triggered device ID. 44/113

46 1. Main Console Snapshot Viewer: Select a event from search result table and click the Play button, the snapshot video will display on right of window. Next frame: Click > button for move to next frame. Pre frame: Click < button for move to pre-frame. Information: Display snapshot video information. Snapshot button: Click Snapshot button will snapshot current image to remove-able device. Backup button: Click Backup button will back up this event video to remove-able device Samba Server: Setup samba server for recording, fill all samba information at here. Samba Name: Key-in Samba server name for identify server. Samba IP Address: Samba server IP address. Samba Path: Key-in Samba server recording path. 45/113

47 1. Main Console User Name: Login Samba server account. Password: Login Samba server password. Add button: Key-in all Samba server information then Click Add button to add to samba server list. Update Button: Select a Samba server from list, then modify server s information, when finish the modify job, click the Update button to save. Delete Button: Select a Samba server for list, then Click Delete Button to remove it from list. 1.9 Event Setting: Management all event from the Event Setting page, include add, modify, remove events, and set each event s schedule, and the actions when event was triggered Add a new Event: 1. Select a camera or local from tree list 2. Click Add button below device list. 3. Select an event from table. (Event list depend on camera s capability) 46/113

48 1. Main Console Motion Alarm: Camera s motion detection, you must set the camera motion first. Disconnect Alarm: The camera connect is disconnected. Digital Input_0 ~ Digital Input_4: Device s digital input detection. Camera Tamper: Depend on Camera s capability. Audio Detection: Depend on Camera s Capability. Schedule Trigger: Trigger by schedule setting. HDD Error Alarm: When record failed will be alarmed, only local device have this event. Face Detection: Alarmed by camera detect human face, you must configure face detection in the camera first. Object Detection: Alarmed by camera detect object move, you must configure object detection in the camera first. Cross Line: Alarmed by camera detected object cross line, you must configure cross line detection in the camera first. 4. Click Add button below Event Schedule List table 5. Select event will detected week days and the time periods of each day. 6. Set Alarm detail parameter A.Alarm trigger condition by event type, i. Motion event, true means alarm trigger by motion, false means alarm triggered by no motion. i. DI event, true means alarm trigger by DI in open status, false means alarm triggered by DI in close status. ii. Schedule trigger, true for alarm in schedule period, 47/113

49 1. Main Console false for alarm triggered when not in schedule periods. B. Select Post-Alarm seconds C. Merge seconds is set for merge two same alarm between setting seconds. 7. Click Add button below Action list table. 8. Select a action, when event was triggered system will execute it Modify exist Event schedule or Action: Modify Event Schedule: 1. select a event from event list. 2. select a schedule from Event schedule list 3. Click Modify button 4. Modify setting values from schedule setting dialog. 5. Click OK button when modify job is done. Modify Action: 1. Select a event from event list. 2. Select a schedule from Event schedule list 3. Select a action from Action List. 4. Click Modify button. 5. Modify setting values from each Action setting dialog. 6. Click OK button to close dialog Delete exist Event schedule or Action: Delete Event: 1. Select a Event from Event List. 2. Click Delete button below the Event List Delete Event Schedule: 1. Select a event from Event List 2. Select a event schedule from Event Schedule List. 3. Click Delete button below Event Schedule List. 48/113

50 1. Main Console Delete Action: 1. Select a event from Event List 2. Select a event schedule from Event Schedule List. 3. Select a Action from Action List. 4. Click Delete button below Action List. When Add / Modify /Delete job was done, you must click OK button to leave Event Setting page, or all setting values will be roll back Action Types: Buzzer: Buzzer work after event was triggered. Digital Output: Select a device for change DO status after event was triggered. Set output to True, DO will change to Close status when alarmed. Set output to False, DO will change to Open status when alarmed. Display On Channel: When event was triggered, system will display OSD string on selected channels. Record: When event was triggered, system will force selected channels record. 1. System must switch Schedule Monitor On event was triggered. 2. The selected channels must has set Recording schedule when event was triggered. Snapshot: System will snapshot images with selected channels, and save snapshot to event snapshot folder automatically, you could search them in Event Snapshot page in System Management. 49/113

51 1. Main Console 1. Select channels for snapshot or record a file when event is triggered. 2. Select Snapshot or Record a period video file 3. Setup Pre-Alarm seconds and Post-Alarm seconds for record file. 4. Select users to send notification when event is triggered. TCP: Send notification TCP sockets to TCP server when event is triggered. HTTP: Send notification to HTTP server when event is triggered. FTP: 1. Select channels for snapshot or record a file when event is triggered. 2. Select Snapshot or Record a period video file 3. Setup Pre-Alarm seconds and Post-Alarm seconds for record file. System will upload file to FTP server when event is triggered. Navigation: Goto camera s preset position. Popup: Switch live division to specific group division. 50/113

52 1. Main Console 1.10 Log Viewer: System Log: Log Type: Select a log type to filter data. Time: Setup search logs in time periods. Limit Record: Setup maximum number records of search result. Click Search button to start search, the search result will display in the table of below Event Log: 51/113

53 1. Main Console Device: Select a Device for search filter. Log Type: Select a log type to filter data. Input: Setup DI input port search filter, only worked on search DI event. Time: Setup search logs in time periods. Limit Record: Setup maximum number records of search result. Click Search button to start search, the search result will display in the table of below. Preview Event Images: Select a event log from log table, event image will display in the window, you could click the play control buttons to preview event images. Change display Channel: Select another camera id from combo box, system will display selected channel image in event time. Snapshot: Insert USB dongle to the NVR first, and click the Snapshot button to save it Bit-rate Log: You could search bit-rate log from bit-rate log page, the days have log will displayed with blue background in the calendar. 52/113

54 1. Main Console Select a date: Click on the calendar with blue background days. Bit-rate table: System will display the bit-rate log in the table. Blue: Bit-rate is very low. Green: Bit-rate is fine. Yellow: Bit-rate is a little high. Orange: Bit-rate is very high. Red: Bit-rate is over limit Camera List: The Camera List page to provide camera name, model name, main stream, second stream, audio, audio record, two way audio, IP address, Http port, Rtsp port, vendor, and MAC address; and you can checked/unchecked several column in left side, to show what is you want to see. When select a camera in right side, information area will show the Live image. You can search other camera then click "Search", leave this page click "OK". 53/113

55 1. Main Console Search: Device Info: Show the camera info. Account: Setup the default login camera user account. Password: Setup the default login camera password. Show Password: Show the password RTSP Port: Set camera s RTSP port, For TCP streaming, default is 554. Update: Update account password or rtsp port if changed. Search: Search camera use filter as follow. Model Name: Key in search filter by Model Name. Camera Name: Key in search filter by Camera Name. IP: Key in search filter by IP address. MAC: Key in search filter by MAC address. Search Seconds: Select a second between 5 and 60 to search. Search: Begin search. Camera: Display installed camera. Installed: Show the number for installed cameras. 54/113

56 1. Main Console Delete: Delete the camera that selected. Remove all: Delete all installed cameras. Information: Show the information and found cameras. Use Seconds: Display the search during time. Status: Display the search action status. Found: Show the found camera's count. Selected: Selected camera to install. Select All: Select maximum camera that the machine can install. Cancel All: Unselect all camera Setup Wizard: Please reference "Quick Install" chapter Schedule Monitor: Click will be stoped. button to enable or disable Schedule job, if it is disable, recording job 1.14 Two way audio: Click button to start or stop focus channel two way audio job. 55/113

57 1. Main Console 1.15 Audio volume adjust: Move the thumb to left to make volume lower, move to right to make volume higher PTZ control: Pan /Tilt: Move PTZ camera direction by click direction buttons. Click to make camera return home position. Move the thumb to left to make slower, move to right to make move faster. Tour: Select a tour setting from combo box, and click go button to start tour, click Stop button to stop tour. Preset: Select a preset position from combo box, camera will move to preset position after click. Add Preset: Move camera then key in new preset name, click Add button. Remove Preset: Select a preset then click Delete button. IRIS: Adjust camera s IRIS setting, or set it to auto. 56/113

58 1. Main Console Focus: Adjust camera s focus setting, or set it to auto. Zoom: Zoom-in or zoom-out focus camera. Pan: Begin camera auto pan or stop E-Map: Switch to Professional or Advance style, and add E-Map to primary or secondary toolbox. Add image and camera into E-Map, E-Map could display camera s position and record status. Double click on camera icon, live preview division will switch to selected camera. E-Map Setting: Click Setup button on left-up corner to lunch E-Map setting dialog. Change Map: Click Change Map button, and select a map image from remove-able device. Add Camera: Enable camera s check box, camera will display on left-top corner, drag camera to the current position on map. Remove Camera: Disable camera s check box. Rotate Camera: Press mouse right button on camera icon 57/113

59 1. Main Console Switch Live Preview: Double click on camera icon. 58/113

60 2. Playback SecuGuard Mini 2. Playback Playback is provide history record file(s) s search, playback, and convert file format functions. User could find out the critical image in minutes by playback tools, and backup these images to SD card with user selected period and length. Click from main page to approach playback page. When you entry playback page, system will auto playback recent history video, You could drag time bar to change current playback time. 59/113

61 2. Playback SecuGuard Mini 2.1 Search history record data: Click to approach search dialog. Normal Search: 1. Select playback date: If there is record history data, System will set calendar s day to blue to identify which days has record files. 2. Begin search: Click Search button to start search record file in selected date, and system will draw search result in the grid. 3. Select playback camera and time period: Select cameras from list, and drag on search result or edit start / end time from date-time picker control to define playback period. 4. Begin playback: Confirm playback camera and period then click OK button to begin playback. Change display range: You can drag thumb at left-down corner to re-range display accuracy. 60/113

62 2. Playback SecuGuard Mini Simple Search: Select playback period from date controls directly, and select which cameras will be playback. Click the OK button when you finish set search rules job. Search by Event: Input search filter first, click the Search button, the search result will display on the list as below. Select a log that you need to playback, system will fill the event period automatically, and select which cameras you need playback together. Click the OK button when you finish set search rules job. 61/113

63 2. Playback SecuGuard Mini 2.2 Playback control button(s): Play video forward. Pause playing video. Stop playing video. Play video backward. Seek to previous frame when on pause mode. Seek to next frame when on pause mode. Switch playback style or Close playback and return main page. Change playback speed. Adjust playback audio volume. 62/113

64 2. Playback SecuGuard Mini Switch display mode to full screen, click mouse right to return normal mode. Take a snapshot to hard disk Select play audio way as below, 1. Mute : Mute sound output 2. Live Audio: Play live focus channel sound 3. Playback Audio: Play playback sound. Select Playback control Pad from popup menu, the mini control pad will display on top, you could use it to control play status. The mini control pad could move to any position that you need in the screen. 63/113

65 2. Playback SecuGuard Mini 2.3 Convert to AVI file: 1. Click to approach search dialog. 2. Select convert camera and time periods as playback search steps, 3. Select converted files destination folder 4. Wait covert job finished or abort job by click cancel button. 2.4 Backup: 1. Click to approach bacup dialog. 2. Select backup cameras and time periods as playback search steps, 3. Select backup destination folder 4. Wait covert job finished or abort job by click cancel button. 64/113

66 2. Playback SecuGuard Mini 2.5 Playback Status: Current Time: Current local time of NVR. Playback Time: The playing video time. Play Status: Display playback status and speed. 2.6 Sequential Search: 65/113

67 2. Playback SecuGuard Mini Click mouse right button on playback channel, and select Sequential Search from popup menu, system will approach Sequential search dialog. You could click on the image for select search begin time and end time, and click the search button will list the images in the selected period. Display Periods: In the left-top corner will show the image periods. Show Information: Display image s time or not. Split: Select display division mode. Pre-Search: Reverse last search result. Search: Search images between selected period. Seek To: Seek all channel to the selected image s time. Cancel: Cancel Sequential search. 2.6 Playback Styles: You could switch playback any time in playback process, choose a style you like. Normal Style: Normal style is traditional graphic user interface style. 66/113

68 2. Playback SecuGuard Mini Switch playback style or leave playback in pop-up menu with click on button of below. Simple Style: Simple style is for easy check video, it provide maximum preview area. Tool Bar: Function / Play/ Division/ Speed/ Audio, Please reference above description. UI Style: Switch playback style from menu. Professional Style: Professional style display control buttons on the below, let you could easy to change playback status. The buttons of professional style please reference above description. 67/113

69 3. Remote Service 3. Remote Service Remote Service provides live streaming preview, system status by Internet browser. The user interface of remote service basically is very similar to local SecuGuard-Mini workstation. 3.1 Installation: If you are first time to access remote service, the IE will show a notification to confirm the ActiveX component installation. Please click Install ActiveX Control to allow this installation. SecuGuard-Mini Remote Service support Internet Explorer(IE) 6, 7 and later. 3.2 Login: Once you connected to the remote service, the IE would popup login window. Please key-in valid user account and password. Each user account s privilege was defined at SecuGuard-Mini. Please make sure login with correct account. 68/113

70 3. Remote Service 3.3 Live Preview: Live preview page operation is same as local, so only list different topic here. 1. Setting page not available. 2. Schedule monitor not available for prevent wrong opration. 3. Additional division window operation. Additional division window operation: Click mouse right button to approach popup menu. Show Live Camera: Select display live preview camera at this window. Remove Camera display: Remove display at this window Digital Zoom: Enable or disable digital zoom mode, when digital zoom is enabled, you could change zoom status by mouse wheel. 69/113

71 3. Remote Service Snapshot: Approach snapshot dialog to adjust image and save. Full Screen: Switch display mode between normal and full screen. Restore division default: Reset division mode to default. 3.4 Playback: Playback is to search, playback, and converts file format on history recorded file(s). User could find out the critical image in minutes by playback tools, and backup these images to user assigned storage by selected period and length. Click Exit button to return live preview page. 70/113

72 3. Remote Service Search history recorded file(s): Click the Search button on Playback page Search history file(s) dialog: Select the time period and camera(s) within the search dialog. 71/113

73 3. Remote Service Select a day to search history file(s): Click, buttons to select the month which you want to search history file(s). Click on the date to choose a day to search Select record mode(s) / Event Type: Check the modes which you want to search. System will search recorded files within these modes only. Check Event types which you want to display, system will display event triggered time on list. You could define display color for each record modes and events by color select dialog. Click button to approach color select dialog Start search: Click the Search button to start search procedure. Please wait a moment for the search result which will appear on the list control Review history record file(s) in search period: The list control will display the result of search procedure. Blue section: Round the clock recorded file(s). Green section: Motion detection recorded file(s). Red section: Alarm recorded file(s). 72/113

74 3. Remote Service Assign time period of search result: 1. You can drag mouse cursor on the list control to assign a time period to playback. 2. Choose a time period by the begin time and end time picker control manually. 1. The selected time period will display as blue section on the list control Select the camera(s) to playback: Select the camera(s) which you want to playback. The system can select maximum 16 camera(s) to playback at once Start playback history file(s): Click the OK button to finish search procedure and start playback, or click Cancel button to abort this job and return to Playback main page. 73/113

75 3. Remote Service Playback control button(s): These buttons are used to control playback start, pause, backward play and the other operations. User can control playback functions by these buttons Play button: Click play button to play the selected history file(s) Pause button: Click pause button to pause playback stream. Some operations must entry pause mode first Backward play button: Click backward play button to playback stream direction to backward mode Stop button: Click stop button to stop playback stream and return to the beginning position of stream Next frame button: When playback is in the pause mode, click the next frame button to seek next frame Previous frame button: When playback is in the pause mode, click the previous frame button to seek previous frame. 74/113

76 3. Remote Service Playback speed control: Turn the speed button to select playback speed. 1X: Normal speed. 2X: Double of normal speed 4X: 4X normal speed. 8X: 8X normal speed. 16X: 16X normal speed. 32X: 32X normal speed. 1/2X: Half of normal speed. 1/4X: Quarter of normal speed Division control buttons: Divide to 1 screen. Divide to 4 screen(s). Divide to 6 screen(s). Divide to 9 screen(s). Divide to 16 Screen(s) Full screen mode. 75/113

77 3. Remote Service Convert to AVI file: Click Convert file button to approach Covert file dialog Convert file dialog: Select time slice and camera to convert to AVI file by the convert file dialog. The AVI file can play on most PC with current codec installed. 76/113

78 3. Remote Service Select a day to covert history file(s): Click, buttons to select the month that wanted to convert history file(s). Click on the date to choose a day to convert file(s) Assign time slice to convert job: Choose a time slice by the Start time and End time picker control, or drag mouse cursor on record list to define convert period Select cameras to convert job: Checked camera s IDs from list to convert job Select a folder to save converted file: Click the brows button to select a folder which will save the converted file Start converting job: Click the OK button to start convert job. When convert job finished, system will p generate a file into assigned folder. Click Cancel button to abort convert job. Ex: The name rule of converted file is as below: CHXXXYYYYMMDDHHmmssnnn.avi XXX: camera ID. YYYY: Execute convert year. MM: Execute convert month. DD: Execute convert day. HH: Execute convert hour. mm: Execute convert minute. ss: Execute convert second. nnn: Execute convert million-second. CH avi 77/113

79 3. Remote Service Backup: Click Convert file button to approach Covert file dialog Backup file dialog: Select time period and camera to backup by dialog. The backup files will save to assigned path, and you can play these backup files with playback Application on you PC. 78/113

80 3. Remote Service Select a day to backup: Click, buttons to select the month that wanted to convert history file(s). Click on the date to choose a day to convert file(s) Assign time slice to backup job: Choose a time period by the Start time and End time picker control, or drag mouse cursor on record list to define convert period Select cameras to backup job: Checked camera s IDs from list to backup job Select a folder to save backup file(s): Click the brows button to select a folder which will save the backup files Start backup job: Click the OK button to start backup job. When backup job finished, system will save backup files into assigned folder. Click Cancel button to abort backup job. Do not modify file s name or placement in backup files folder, if them was modified, the playback application will be playback fail. 79/113

81 3. Remote Service Switch audio play mode: Click Audio mode button to popup the menu of audio mode. Select the audio mode from the popup menu. The checked item means the current mode of audio playback now. Mute: No audio data will play. Live: Play the live audio stream. Playback: Play the playback audio stream Playback setting: Click the Setting button to popup the menu of playback setting. Check the item(s) to change OSD status on the image while the recorded file is playing back. Display Date: Display the date of recorded file on the image. Display Time: Display the time of recorded file on the image. Display camera name: Display the camera name on the image Snapshot dialog: Click the snapshot button to approach snapshot dialog. This function is used to take a snapshot of the playing history file. 80/113

82 3. Remote Service Snapshot all dialog: The snapshot all dialog will display all snapshot images on the dialog. You can choose which image will be saved and assign the file format and folder Select snapshot image: The dialog displays all snapshot images with the camera ID, resolution, and camera name. Check the check box if you want to save this image. 81/113

83 3. Remote Service Select snapshot folder: Click brows button to select a folder to save snapshot images Select file format: Select the image file format in the combo box Save snapshot images: Click the OK button to save all selected images or click cancel button to abort this snapshot job Saved image file name: The name rule of saved file is as below: CamXXX_NNNNNN_YYYYMMDDHHmmssnnn.jpg XXX: camera ID. NNNN: camera name. YYYY: The image s year of date. MM: The image s month of date. DD: The image s day of date. HH: The image s hour of time. mm: The image s minute of time. ss: The image s second of time. nnn: The image s million-second of time. Ex: Cam000_AM _ jpg 82/113

84 3. Remote Service Playback status: Current Time: Playback Time: Playback status: System current time. The playing video time. Display playback status and speed. 83/113

85 3. Remote Service Operation with sub-screen: Define display camera(s) sequence: 1. To switch display sequence in sub-screen(s), press and hold mouse left button on source sub-screen, and then drag to target sub-screen and release mouse left button. 2. To switch current sub-window to another camera, click mouse right button on the sub-screen, and then choose the preferred playback camera Digital Zoom at sub-screen: 1. Click mouse right button on sub-screen, and then check the Digital Zoom. 2. Move mouse cursor to the position where you want to do digital zoom. 3. Move mouse wheel forward to zoom in the image. 4. Move mouse wheel backward to zoom out the image. 5. Press and hold mouse left button to drag the image at sub-screen to the position where you needed. 6. To cancel digital zoom mode, click mouse right button and un-check the Digital Zoom. 84/113

86 3. Remote Service Switch to Full screen: 1. Click mouse right button and check Full screen on popup menu to switch Full screen mode. 2. Click Esc button or un-check Full screen on popup menu to return normal display mode Snapshot of sub-screen: 1.Click mouse right button and choose Snapshot on popup menu. 2.Configure the image by Snapshot dialog. 3.Click Save button and choose the folder which you want to save the snapshot. Snapshot dialog: 85/113

87 3. Remote Service Bright: 50 = Maximum brightness, -50 = Maximum dark Contrast: 50 = Maximum strong with Contrast, -50 = Minimum value of Contrast. Grayscale: Click to switch image to grayscale mode. Sharp: Click Sharp button to increase image sharp level. Soft: Click Soft button to increase image soft level. Reset: Click Reset button to restore image to original image. Print: Click Print button to print out image to printer. Save: Click Save button and then choose folder and file name to save the snapshot. Exit: Close Snapshot dialog Motion Search: Click mouse right button on the channel which you want to do motion search, and then select the Motion Search from the popup menu. 86/113

88 3. Remote Service Define motion search area: Add: Delete: Default: Click the Add button then drag a rectangle area where you want to check. The search area will overlay a transparent red mask. Define a rectangle area on the image first, then click Delete button to remove the region that was defined. Click the Default button to select full image for motion detection. Check the Show Search Image to display the searching video sequence or un-check this box to only show the image once the event found. Check the Show Detect Mark to display the detect result on the image by pink rectangles. Select the Sensitivity to define the sensitivity of detection. The higher value means the event will be triggered easier. Select the Detect Interval to define the interval of motion detection. If set longer value, means system will use less CPU computing power to check motion detection. When the event has been triggered, the window on the right side will display the triggered image. If the event is not matched your expectation, click the Continue button to search next event. If you found the matched event, click the OK button to return to the playback panel, 87/113

89 3. Remote Service and all playing channels will be synchronized to the same timestamp of the event. Click Cancel button to abort this motion search job Sequential Search: Click mouse right button on the channel which you want to do sequential search, and then select the Sequential Search from the popup menu. Sequential Search Window: Quick start with sequential search: 1. Choose sequential search channel and time period. 2. Select two images from these sequential pictures by clicking on the images, and then click the Search button. 3. Repeat this procedure until time period into one second resolution. 4. Click Detail picture button to approach snapshot images dialog. 5. Select these snapshot images, and save them to assigned folder Define search time period: We need to define time period for the sequential search task. We could define time 88/113

90 3. Remote Service period by two ways and the selected time period will display on the upper left corner. 1. Select two images from these sequential pictures to define search time period. Click on the image to select it and click it again to un-select it. 2. Or drag on the time line to define search time period directly. Blue bar: The time period of selected images for sequential search. Green transparent bar: New time period to be searched Start search and rollback: After defined search time period, and then click the Search button to display next search result. Click Pre search button for rollback to previous search result Detail window for snapshots: The dialog will display small snapshot images by search result. In case you need bigger image of snapshots, you could enable Show Detail Window to get a resizable window for display the detail snapshot. You could move the detail window and resize it to get bigger preview image size Preview mode of search result: You could define the preview mode of search result by these parameters below. Time Split: Define the number to divide the search time period equally, and take a snapshot at 89/113

91 3. Remote Service beginning of each part. Division: Select the display division mode of search result. Switch page buttons: In case the search result couldn t display within one page, then these buttons will be enabled. Click these buttons to switch the pages of snapshot. 3.5 Remote System Setting: Camera setting: 90/113

92 3. Remote Service Camera list: List all cameras that was inserted, select a camera from list to modify camera s information. CameraConfig: Vender: Select camera s Vender ID. Model: Display Camera s Model name. Camera Name: Key-in Camera s name here. IP: Key-in Camera s IP address at here. Port: Key-in Camera s HTTP port at here. User: Key-in login user name at here. Password: Key-in login password at here. 91/113

93 3. Remote Service Add Button: Add a camera into cameras list. Delete Button: Remove selected camera from camera list. Edit Button: Update modified camera s information into list. Clear Button: Clear all field of camera s information. Auto Detect Button: Detect selected camera, and auto update camera s information. Config Detail Button: Connect to Camera s Web page for detail configuration. Camera Parameter Button: Enter Camera s Parameter setting page. Camera Parameter Setting Page: Video Setting: Video codec: Select Video codec for streaming. Resolution: Select streaming resolution. Network Setting: Protocol: Select streaming network protocol. RTSP Port: Define RTSP streaming port with camera. Audio Setting: Enable Audio: Enable Audio streaming from Camera. Enable Audio Record: Enable recording with audio data. 92/113

94 3. Remote Service Schedule setting: Camera and Weekday list: List all cameras and weekdays, select a weekday for configuration at here. Schedule management: Add a new schedule: 1. Select a weekday of camera first. 2. Drag mouse cursor on empty area 3. Or Fill start time and end time then click add button. Edit a exist schedule: Double click on a schedule window, or you can click on a schedule window then click Edit button. 93/113

95 3. Remote Service Delete a exist schedule: Select a schedule window then click Delete button. Schedule setting: Select a record mode from Round the Clock, Motion detection, DI detection, or Alarm Record. If you select the Motion Detection, DI detection or Alarm Record, you could define Pre-Alarm and Post-Alarm record seconds when alarm was triggered. If you select the DI detection record mode, you should select a DI input source and define trigger condition Network setting: DHCP setting: Checked the Obtain IP address automatically(dhcp) to enable auto get IP from DHCP server. MAC address: Display MAC address of this NVR. Fixed IP setting: If disable DHCP function, you should key-in IP setting here, and you can click Test button to detect IP conflict. DNS setting: Checked Obtain DNS from DHCP for get DNS setting from DHCP server, it only works on DHCP was enabled. If Obtain DNS from DHCP was disabled, you could key-in DNS server IP in the text box. PPPOE Setting: Enable / Disable: Select from the radio boxes to enable or disable PPPOE function. User Name: Key-in user name to login PPPOE server here. 94/113

96 3. Remote Service Password: Key-in login PPPOE server password here. IP address: Display current IP address get from PPPOE server. Subnet Mask: Display current subnet mask get from PPPOE server. Gateway: Display current gateway get from PPPOE server. Status: Display PPPOE status. UPNP Setting: Display UPnP friend name on network. UPnP Traversal Setting: Enable UPnP Traversal to auto request port mapping with router, and define maximum and minimum port value here. Server Setting: Enable server option for start HTTP and RTSP server, after remote service started, Users could be connect remote service by IE browser. HTTP Port: Set HTTP service port here. RTSP Port: Set RTSP service port here. RTSP over HTTP: Enable RTSP over HTTP function, the remote live streaming will use HTTP protocol and HTTP port System setting: Device Info: Model Name: Display Model Name. Device Title: Key-in device title here. Software version: Display current firmware 95/113

97 3. Remote Service version. Date Time: Server Date & Time: Display current system date-time. Adjust: Manual Setting: Click setting to approach date-time setting dialog, and select current date and time now, click OK to change system time or click Cancel button to abort configuration. Synchronize with NTP: Enable synchronize date-time with NTP service. NTP Server: Key-in NTP server IP or domain name, if you use the domain name to connect NTP server,the DNS service must be enabled. NTP Sync Interval: Select a value to set interval of each time synchronization with NTP service. Time Zone: Select the time zone of NVR location. Daylight saving: Enable or disable daylight saving mode. Daylight saving Start Time: Configure daylight saving start time, it works with daylight saving mode enabled. Daylight saving End Time: Configure daylight saving end time, it works with daylight saving mode enabled. Daylight saving Offset: Configure daylight saving offset time with current time, it works with daylight saving mode enabled. Auto Login: Enable auto login mode to login with defined user name and password when system boot up. User: Key-in auto login user name. 96/113

98 3. Remote Service Password: Key-in auto login password. System Setting: Auto Full-Screen: Enable Auto full screen to switch to full screen mode when system boot up. Language: Change display language from language combo box. Audio Output Gain: Adjust ouput gain value between 0 to 100. DIPS Display device DIPS ID. Click Test button for test connection with DIPS server User setting: User: Edit User name at here. Password / Confirm Password: Edit User login password at here. Group: Select user s login group. Description: Key-in description of this user. Monitor: Select which cameras that current edit user could preview live streaming. Playback: Select which cameras that current edit user could playback history record data. Record: Enable this user could start and stop record job. Setting: Enable this user could entry system setting fuction. PTZ: 97/113

99 3. Remote Service Enable this user could operator PTZ functions. Two way audio: Enable this user could start and stop two way audio. Add User: After key-in user information, click Add button to insert new user account into setting. Modify User: Select a user first, after modified user information, you must click Modify button to update user information to setting. Delete User: Select a use first, then click Delete button to remove selected user from setting Motion Config: Setup each camera s motion detection at here. Add a new motion detection window: 1. Select a Camera from camera list. 2. Click Add button to add a new motion detection window. 3. Move the new motion window to the place that you need to detect. 4. Modify the motion window name. 5. Select detect area is include or exclude the motion window. 6. Define the motion detection object size. 98/113

100 3. Remote Service 7. Define the motion detection sensitivity. 8. Click Update button to transform new setting to camera. Modify a motion detection window: 1. Select a Camera from camera list. 2. Select a motion window from motion windows list. 3. Move the motion window to the place that you need to detect. 4. Modify the motion window name. 5. Select detect area is include or exclude the motion window. 6. Define the motion detection object size. 7. Define the motion detection sensitivity. 8. Click Update button to transform new setting to camera. Delete a motion detection window: 1. Select a camera form camera list. 2. Select a motion window form motion window list. 3. Click Delete button to remove the selected motion window Address Book: Management Address book at here, you could send notification to these people with event trigger or others. Name: Receiver s Name. Phone: Receiver s phone number. Receiver s address. 99/113

101 3. Remote Service Remark: You could type some extra description at here Notification: Setup notification server s information at here, when event was triggered, the notification message will send to server by these settings. SMTP setting: SMTP Server: Fill SMTP server s IP or domain name. SMTP Port: Fill SMTP server s service port number. User Name: Fill login SMTP server s account. Password: Fill login SMTP server s password. From: Fill the s From field value. Subject: Fill the s Subject field value. 100/113

102 3. Remote Service Body: Fill the s body content. Retry: Setup the retry count when send failed. Send Interval: Setup interval seconds between each time send . Send Mail without Picture: Enable it for send without attach event images, that could decrease s size. Server Require Authentication: The server need Authentication. Server Require Secure Connection: The server need SSL connection. Send Test Button: Send out a test mail for test Server information is correct. HTTP Setting: HTTP IP: HTTP server s IP or domain name. HTTP Port: HTTP server s service port. HTTP User Name: Login HTTP server s user account. HTTP Password: Login HTTP server s password. HTTP CGI: HTTP server receive notification CGI path FTP Setting : FTP Server: FTP server IP or domain name. FTP port: FTP server service port. 101/113

103 3. Remote Service User Name: Login FTP server account. Password: Login FTP server password. Path: Upload picture or video path. Retry: Retry how many times when upload fail. Recycle Days: Keep upload failed picture or video how many days. TCP Config: TCP server: TCP server IP or domain name. TCP port: TCP service port number. 102/113

104 3. Remote Service 3.6 Remote System Management: Maintenace: Style: Resolution: Select NVR s resolution from combo list. 103/113

105 3. Remote Service Maintenance: Backup Setting: Export backup setting file to remove-able storage device. Restore Setting: Restore a backup setting file from remove-able storage device. Firmware Upgrade: Select a firmware file from remove-able storage device, then click Firmware Upgrade button to begin update firmware job. System Restart: Restart NVR system Samba server: Add a new Samba record Path: 1. Key-in Samba server s Name and IP. 2. Key-in login Samba server s account and password. 3. Define Record path of Samba server. 104/113

106 3. Remote Service Modify a Samba Record Path: 1. Select a Samba path from Samba server list. 2. Modify Samba server s information from each field. 3. Click Update button. Delete a Samba Record Path: 1. Select a Samba path from Samba server list. 2. Click Delete button. 3.7 Remote Event Setting: 105/113

107 3. Remote Service Management all event from the Event Setting page, include add, modify, remove events, and set each event s schedule, and the actions when event was triggered Add a new Event: 1. Select a camera or local from tree list 2. Click Add button below device list. 3. Select a Event from table. Motion Alarm: Camera s motion detection, you must set the camera motion first. Disconnect Alarm: The camera connect is disconnected. Digital Input_0 ~ Digital Input_4: Device s DI detection. Schedule Trigger: Trigger by schedule setting. HDD Error Alarm: When record failed will be alarmed, only local device have this event. 4. Click Add button below Event Schedule List table 5. Select event will detected week days and the time periods of each day. 106/113

108 3. Remote Service 6. Set Alarm detail parameter A. Alarm trigger condition by event type, i. Motion event, true means alarm trigger by motion, false means alarm triggered by no motion. ii. DI event, true means alarm trigger by DI in open status, false means alarm triggered by DI in close status. iii. Schedule trigger, true for alarm in schedule period, false for alarm triggered when not in schedule periods. B. Select Post-Alarm seconds C. Merge seconds is set for merge two same alarm between setting seconds. 7. Click Add button below Action list table. 8. Select a action, when event was triggered system will execute it Modify exist Event schedule or Action: Modify Event Schedule: 1. Select a event from event list. 2. Select a schedule from Event schedule list 3. Click Modify button 4. Modify setting values from schedule setting dialog. 5. Click OK button when modify job is done. Modify Action: 1. Select a event from event list. 2. Select a schedule from Event schedule list 3. Select a action from Action List. 4. Click Modify button. 5. Modify setting values from each Action setting dialog. 6. Click OK button to close dialog Delete exist Event schedule or Action: Delete Event: 1. Select a Event from Event List. 2. Click Delete button below the Event List 107/113

109 3. Remote Service Delete Event Schedule: 1. Select a event from Event List 2. Select a event schedule from Event Schedule List. 3. Click Delete button below Event Schedule List. Delete Action: 1. Select a event from Event List 2. Select a event schedule from Event Schedule List. 3. Select a Action from Action List. 4. Click Delete button below Action List. When Add / Modify /Delete job was done, you must click OK button to leave Event Setting page, or all setting values will be roll back Action Types: Buzzer: Buzzer work after event was triggered. Digital Output: Select a device for change DO status after event was triggered. Set output to True, DO will change to Close status when alarmed. Set output to False, DO will change to Open status when alarmed. Display On Channel: When event was triggered, system will display OSD string on selected channels. Record: When event was triggered, system will force selected channels record. 1. System must switch Schedule Monitor On event was triggered. 2. The selected channels must has set Recording schedule when event was triggered. 108/113

110 3. Remote Service Snapshot: System will snapshot images with selected channels, and save snapshot to event snapshot folder automatically, you could search them in Event Snapshot page in System Management Select channels for snapshot or record a file when event is triggered. 2. Select Snapshot or Record a period video file 3. Setup Pre-Alarm seconds and Post-Alarm seconds for record file. 4. Select users to send notification when event is triggered. TCP: Send notification TCP sockets to TCP server when event is triggered. HTTP: Send notification to HTTP server when event is triggered. FTP: 1. Select channels for snapshot or record a file when event is triggered. 2. Select Snapshot or Record a period video file 3. Setup Pre-Alarm seconds and Post-Alarm seconds for record file. System will upload file to FTP server when event is triggered. 109/113

111 4. Utility SecuGuard Mini 4. Utility 4.1 Event file viewer: 1 2 Install Event File Viewer to you PC by NVR Utility installer, the viewer is provide event files check on you PC with the notification from NVR. NVR will send the files to FTP or when alarm was triggered, there are two file format as below..eimg File: The record file of event. 3 4.snap file: The snapshot file of event. 5 6 Each event file include event s information and images group, you could use the viewer to preview, convert to AVI or snapshot a single jpg file. Image time: The current image s time. Camera Information: Camera channel s ID and camera name. Image: The event images, the video length is depend on NVR s event record setting, event snapshot file will get a group frames of h.264. Playback Control: Play video forward. Pause playing video. 110/113