Assistance Level option... 9 PAS Ratio Settings Controller Over-Current Cut Settings Power Assistant Sensor Settings...
|
|
- Helena Atkinson
- 5 years ago
- Views:
Transcription
1
2 Content Product name and model... 1 Specifications... 1 Appearance and Size... 1 Color categories... 1 Function Summary and Button Definition... 1 Function Summary... 1 Functional Area Distribution... 2 Button Definition... 2 General Operation... 3 Switching the ebike System On/Off... 3 Displaying Interface... 3 Switching Push-assistance mode On/Off... 3 Switching the Lighting On/Off... 4 Assistance Level Selection... 4 Battery Indicator... 5 Error Code Indication... 5 General Settings... 5 Trip Distance Clearance... 6 Backlight Contrast settings... 6 Unit km/mi Conversion... 6 General Parameter Settings... 7 Wheel Diameter Settings... 7 Speed-limit Settings... 7 Personalized Parameter Settings... 8 Battery Power Bar Settings... 9 Assistance Level Settings... 9
3 Assistance Level option... 9 PAS Ratio Settings Controller Over-Current Cut Settings Power Assistant Sensor Settings The Direction of Power Assistant Sensor Settings The Sensitivity of PAS Settings Magnet quantity Settings Speed Sensor option Throttle Definition Throttle Push-assistance Enable/Disable Throttle Level Enable/Disable System Settings Delay time settings of battery power Max speed limited Button Push-assistance Enable/Disable PAS Speed Settings Slowly Start up Settings Power-on Password Settings Power-on Password Enable/Disable Power-on Password Modify Exit settings Recover default settings Operation Cautions Quality assurance and warranty scope Connection layout... 18
4 Product name and model Intelligent LCD display of ebike; model: KD21C. Specifications 24V/36V/48V Power Supply Rated working current: 10mA The maximum working current: 30mA Off leakage current: <1uA The supply controller working current: 50mA Working temperature:-20 ~ 60 Storage temperature: -30 ~ 70 Appearance and Size Display appearance and dimension figure (unit: mm) Color categories Top shell of the display is two color options, black and white, and bottom shell of the display is only one black. Function Summary and Button Definition Function Summary KD21C can provide a lot of functions to fit the users needs. The 1
5 indicating contents are as following Smart Battery indicator Motor-output indication Assistance-level indication Speed indication (incl. running speed, max speed and average speed) Trip distance and total distance The push-assistance function Trip time display of single The Lighting On/Off Error Code indication Various Parameters Settings (e.g. wheel size, speed-limited, battery level bar, assistance level, controller limited current, max speed, password enable, etc.) Recover Default Settings Functional Area Distribution Button Definition There are three buttons (,, ) on the KD21C display that represented by the following functions respectively: MODE, UP, DOWN. 2
6 General Operation Switching the ebike System On/Off To switch on the ebike system, hold the MODE button for 2s. In the same way to hold the MODE button for 2s again, the ebike system will be switched off. When switching off the ebike system the leakage current is less than 1 ua. When parking the ebike for more than 10 minutes, the ebike system switches off automatically. Displaying Interface After switching on the ebike system, the display shows Running Speed and Total Distance except battery indicator and assistance level. To change the indicated information, press the MODE button to show in turn as below: Running Speed (Km/h) Trip Distance (Km) Trip Time (Hour.) Max Speed (Km/h) Average Speed (Km/h) Motor Power (W) Running Speed (Km/h). Switching Push-assistance mode On/Off To access the push-assistance mode, hold the DOWN button always, the ebike will go on at a uniform speed of 6 Km/h, P is showed on the screen at the same time. The push-assistance function switches off as soon as you release the DOWN button. 3
7 Push-assistance Mode Push-assistance function may only be used when pushing the ebike. Danger of injury when the wheels of the ebike do not have ground contact while using the push-assistance function. Switching the Lighting On/Off To switch on the display backlight and headlight of the ebike, hold the UP button for 2s. In the same way to hold the UP button for 2s again, the backlight and the headlight will be switched off. Switch On/Off the Lighting Assistance Level Selection Assistance levels indicate the output power of the motor. The default value is level 1. The default power ranges from level 0 to level 5.The output power is zero on Level 0. Level 1 is the minimum power. Level 5 is the maximum power. Gear to level 5 and then press the UP button, the interface shows 5 still and 5 flashing prompts top. Gear to level 0 and then press the DOWN button, the interface shows 0 still and 0 flashing prompts low. To change assistance level, press the UP/DOWN to increase or decrease until the desired assistance level is displayed. 4
8 Assistance Level 3 Battery Indicator The five battery bars represent the capacity of the battery. When the battery is in low voltage, battery frame will flash to notice that the battery needs to be recharged immediately. Low Voltage Flash Battery Indicator Error Code Indication If there are errors about the electronic control system, the error code will appear automatically. Here is the message of the error code in Attached list 1. Error Code Indication Offer the display to a Service Center when an error code appears. General Settings After the ebike system is switched on, to access general settings 5
9 menu, hold both the UP and DOWN button for 2s. All the Settings are operated in the case of parking the ebike. Trip Distance Clearance TC represents trip distance clearance setting. To clear trip distance, press the UP/DOWN button to choose Y or N. The default value is N. To store a changed setting, press the MODE button and then access backlight contrast settings. Various symbol definitions refer to Attached list 4. Trip Distance Clearance Settings Interface Backlight Contrast settings bl represents backlight contrast settings. Level 1 is the low brightness. Level 2 is the middle brightness. Level 3 is high brightness. The default value is 1. To modify the backlight brightness, press the UP/DOWN button to increase or decrease until the desired setting is displayed. To store a changed setting, press the MODE button and then access unit Conversion Settings. Backlight Brightness Settings Interface Unit km/mi Conversion U represents unit settings, 1 is mile, 2 is kilometer. The default 6
10 value is 2. To convert unit, press the UP/DOWN button to increase or decrease until the desired setting is displayed. To store a changed setting, press the MODE button, and then access trip distance clearance settings. To store a changed setting, hold the MODE button for 2s and then exit general settings. Mile and Kilometer Conversion Settings Interface General Parameter Settings To access general parameter Settings interface, hold both the UP and the DOWN button for 2s, then hold both the DOWN and MODE button for 2s again. Wheel Diameter Settings Ld represents wheel diameter settings. Electable values are 16, 18, 20, 22, 24, 26, 700C and 28. The default value is 20 inch. To change basic settings, press the UP/DOWN button to increase or decrease until the desired value is displayed. To store a changed setting and access speed-limit settings interface, press the MODE button. Wheel Diameter Settings Interface Speed-limit Settings LS represents the limit speed settings. When the running speed is 7
11 faster than limit speed, the ebike system will switch off automatically. Limit speed ranges from 12Km/h to 40Km/h. The default value is 25Km/h. To change basic settings, press the UP/DOWN button to increase or decrease until the desired value is displayed. To store a changed setting and exit General Parameter Settings, hold the MODE button for 2s. Limit Speed Settings Interface Personalized Parameter Settings Personalized Parameter Settings can match a variety of requirements in use. There are 8 Settings items, such as Battery Power Bar Settings, Power assistant level Settings, Over-current Cut Settings, Power Assistant Sensor Settings, Speed Sensor Settings, Throttle Function Settings, System Settings and Power-on Password Settings. Please refer to the Attached list 2. To access Personalized Parameter Settings items option page, hold both the UP and DOWN button for 2s, then hold both the UP and DOWN button again. To access the corresponding settings page, press the UP/DOWN button to increase or decrease until the desired item is displayed, and press the MODE button again. Options Selection Interface 8
12 Battery Power Bar Settings VOL represents voltage settings. Each bar represents a voltage value. 5 bars voltage values must be entered one by one. For example, VOL 1 is first bar voltage value, the default value is To set battery power bar, press the UP/DOWN button to increase or decrease the number. To store a changed setting and access the second bar, press the MODE button. By analogy, after 5 bars voltage values is entered, hold the MODE button to confirm and return to the previous menu. Battery Power Bar Settings Assistance Level Settings Assistance Level option In assistance level settings, there are 8 modes to select: 0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, 1-9. The default value is 0-5. To select the mode of assistance level, press the UP/DOWN button to increase or decrease until the desired setting is displayed. To store the changed setting and access the PAS ratio settings page, press the MODE button. 1-5 flash PAS Mode Option Interface 9
13 PAS Ratio Settings To modify the value of PAS ratio can match the different requirements. For example, the range is percent of 1 level, bottom value can be modified, and the default value is 50 percent. To store the modified setting, press the MODE button and turn to the next PAS ratio settings. After all PAS ratio inputted, hold the MODE button for 2s to confirm and then return to previous menu. Please refer to Attached list 3. PAS Ratio Interface Controller Over-Current Cut Settings CUR represents controller over-current cut settings. CUR value can be changed from 7.0A to 22.0A. The default value is 15A. To change basic settings, press the UP/DOWN button to increase or decrease the value of the current. To store a changed setting, hold the MODE button and then return to previous menu. CUR Settings Interface Power Assistant Sensor Settings The Direction of Power Assistant Sensor Settings PAS represents power assistant sensor settings. run-f means forward direction, while run-b means back direction. The default value is run-f. 10
14 To change The Direction of Power Assistant Sensor Settings, press the UP/DOWN button to select F or b. To store a changed setting, press the MODE button and then access settings mode of PAS sensitivity. Direction of PAS Sensor Settings The Sensitivity of PAS Settings SCN represents the sensitivity of PAS settings. The sensitivity value ranges from 2 to 9. 2 is the strongest, 9 is the weakest. The default value is 2. To change the sensitivity of PAS settings, press the UP/DOWN button to select sensitivity value. To store a changed setting, press the MODE button and then access magnet disk settings mode. The Sensitivity of PAS Settings Magnet quantity Settings N represents magnet numbers of PAS disk. The default value is 6. To change magnet numbers of PAS disk, press the UP/DOWN button to select quantity corresponding to PAS disk. To store a changed setting, hold the MODE button and then return to previous menu. 11
15 PAS Magnet Disk Settings Speed Sensor option SPS represents speed sensor settings. The default value is 1 To change speed sensor settings, press the UP/DOWN button to select the quantity of magnet head (the range is from 1 to 9). To store a changed setting, hold the MODE button and then return to previous menu. Speed Sensor Selection Throttle Definition Throttle Push-assistance Enable/Disable HL represents throttle push-assistance function. HL-N represents throttle assistance push function is disabled. HL-y represents throttle assistance push function is enabled. The default value is N. To change throttle push-assistance function, press the UP/DOWN button to select Y. To store a changed setting, press the MODE button. Otherwise, to select N and then access Throttle Level Enable Settings. Throttle Enable/Disable Interface 12
16 Throttle Level Enable/Disable HF-y represents throttle level is enabled. HF-N represents throttle level is disabled. The default value is N. To change throttle level function, press the UP/DOWN button to select Y or N. To store a changed setting, press the MODE button and then access Throttle Enable Settings page. To return to previous menu, hold the MODE button for 2s. Throttle Level Enable or Disable Interface System Settings Delay time settings of battery power DLY represents delay time of battery power settings. The default value is 3s. To change delay time settings, press the UP/DOWN button to select delay time 3s, 6s, 12s. To store a changed setting, press the MODE button and then access the max speed limited. Delay Time of Battery Power Interface Max speed limited MAX SPD represents max speed limited settings. The default value is 40Km/h. To change Max speed limited setting, press the UP/DOWN button to set the max speed from 25Km/h to 40 Km/h. To store a modified setting, press the MODE button and then access Button PAS Settings. 13
17 Interface of Max Speed Limited Settings This setting is the priority version. The speed is the maximum set by manufacturer. Button Push-assistance Enable/Disable PUS represents button push-assistance settings. Y represents button push is enabled, N represents button push is disabled. The default value is Y. To change button push-assistance settings, press the UP/DOWN button to choose Y or N. To store a changed setting, press the MODE button and then access PAS speed settings. Interface of Push-assistance PAS Speed Settings To change PAS speed settings, press the UP/DOWN button to adjust from 20% to 35%, To store a modified setting, press the MODE button and then access slowly start up. The default value is 25%. 14
18 Interface of PAS Speed Settings Slowly Start up Settings SSP represents slowly start up. The range is 1-4, 4 is the slowest. The default value is 1. To change slowly start up settings, press the UP/DOWN button to select the desired value. To store a changed setting, press the MODE button and then turn to Delay time settings of battery power page. To return to previous menu, hold the MODE button for 2s. Interface of Slowly Settings Up Power-on Password Settings P2, 0000 on the screen means power-on password settings. The default value is To access the power-on password settings, press the UP/DOWN button to modify the value and then press the MODE button to confirm digit one by one until the correct 4-digit password is completed, and then press the MODE button to access power-on password enable settings interface, otherwise stay on the password input state. 15
19 Power-on Password Entering Interface Power-on Password Enable/Disable To change power-on password enable/disable settings, press the UP/DOWN button to select Y or N. If it is Y, press the MODE button and then access power-on password modify interface, otherwise exit the power-on password settings interface. The default value is N. Y is power-on password enable N is power-on password disable Power-on Password Disable Interface Power-on Password Modify When the display shows P3, 0000, to set new power-on password, press the UP/DOWN button to modify the value and then press the MODE button to confirm digit one by one until the new 4-digit password is completed. To store the new power-on password, hold the MODE button for 2s and then exit settings. When switching the ebike system on next time, the display will show P1,0000, please input the new password to power on. 16
20 Power-on Password Modify Interface Exit settings In the settings state, pressing the MODE button is to confirm the input. Holding the MODE button is to store the settings, and then exit the current settings. Holding the DOWN button is to cancel the operating but not storing settings data, and then return to previous menu. If there is not any operations in one minute, the display will exit the settings state. Recover default settings def represents recover default settings. The default value is N. To access recover default settings, hold both the UP and MODE button for 2s and press the UP/DOWN button to choose Y or N again. N means that do not recover default settings. Y means that recovers default settings. When it is Y, hold the MODE button for 2s to recover default settings, the display shows DEF-00 at the same time, and then return to general display state. Recover Default Settings Interface Operation Cautions Be careful of safe use. Don t attempt to release the connector when battery is on power. Try to avoid hitting. 17
21 Don t modify system parameters to avoid parameters disorder. Make the display repaired when error code appears. Quality assurance and warranty scope Ⅰ Warranty 1) The warranty will be valid only for products used in normal usage and conditions. 2) The warranty is valid for 24 months after the shipment or delivery to the customer. Ⅱ Other items The following items do not belong to our warranty scope: 1) The display is demolished. 2) The damage of the display is caused by wrong installation or operation. 3) Shell of the display is broken when the display is out of the factory. 4) Wire of the display is broken. 5) Beyond W arranty period. 6) The fault or damage of the display is caused by the force majeure (e.g., fire, earthquake, etc.). Connection layout Connector line sequence Display-side Connector Display-side adapter Switch wiring 18
22 Line sequence table Line sequence Color Function 1 Red(VCC) + 2 Blue(K) Lock 3 Black(GND) - 4 Green(RX) RX 5 Yellow(TX) TX Some wire use the water-proof connector, users can not see the inside color. Attached list 1:Error code definition Error Code Definition 21 Current Abnormality 22 Throttle Abnormality 23 Motor Abnormality 24 Motor Hall Signal Abnormality 25 Brake Abnormality 30 Communication Abnormality 19
23 Attached list 2: Personality Parameter settings No. Settings item 1 Battery Power Bar Settings 2 Power assistant level Settings 3 Over-current Cut Settings 4 Power Assistant Sensor Settings 5 Speed Sensor Settings 6 Throttle Function Settings 7 System Settings 8 Power-on Password Settings Screen display Attached list 3: Power assist table 20
24 Attached list 4: symbol definition No. Symbol Definition 1 Trip distance clearance 2 Backlight 3 Unit 4 Voltage 5 Wheel diameter 6 Speed limit 7 Controller over-current cut 8 Backward 9 Forward 10 Sensitivity of PAS 11 Speed sensor 12 Power delayed time 13 Throttle power assist walk 14 Throttle-changing 15 Button push 16 Slowly start up 17 Password 18 Recover default 19 Yes 20 No 21
Content. Product Name and Model... 1 Specifications... 1 Appearance and Size... 1 Function Summary... 2
Content Product Name and Model... 1 Specifications... 1 Appearance and Size... 1 Function Summary... 2 Function Summary... 2 Functional Area Distribution... 3 General Operation... 3 Switching the ebike
User manual E-CITY 5.5 E-COUNTRY 5.5. Enjoy your ride! BATTERY: SAMSUNG CELL 13-16Ah MOTOR: BAFANG 250W 36V
User manual E-CITY 5.5 E-COUNTRY 5.5 Enjoy your ride! www.crussis.cz BATTERY: SAMSUNG CELL 13-16Ah MOTOR: BAFANG 250W 36V Content Product name and model...1 Specifica ons...1 Appearance and Size...1 Color
Contents. Product name and model... 1 Specifications... 1 Appearance and Size... 1 Function Summary and Button Definition... 2 Function Summary...
Contents Product name and model... 1 Specifications... 1 Appearance and Size... 1 Function Summary and Button Definition... 2 Function Summary... 2 Button Definition... 2 Assembly... 2 Function Area Distribution...
Contents. Product name and model... 1 Specifications... 1 Appearance and Size... 1 Function Summary and Button Definition...2 Function Summary...
Contents Product name and model... 1 Specifications... 1 Appearance and Size... 1 Function Summary and Button Definition...2 Function Summary... 2 Button Definition...2 Assembly...2 Function Area Distribution...2
KING-METER KM5S LCD USERS GUIDE. 中文 1-31 页 English P32-64
KING-METER USERS GUIDE KM5S LCD 中文 1-31 页 English P32-64 Contents About the User Manual 32 Appearance and Size 33 Material and Color 33 Function Summary and Button Definition 34 Function Summary 34 Monitor
Table of content 1 Preface 18 2 Appearance and size Material and color Display size and installation size 19 3 Function summary and
Table of content 1 Preface 18 2 Appearance and size.19 2.1 Material and color 19 2.2 Display size and installation size 19 3 Function summary and button definition 20 3.1 Preset and default items. 20 3.2
Manual. C500B LCD Instructions
Manual C500B LCD Instructions CONTENT ABOUT THE USER MANUAL 3 OUTLOOK AND SIZE 3 MATERIAL AND COLOR 3 BUTTON DEFINITION 4 FUNCTION SUMMARY 5 FULL VIEW AREA 7 NORMAL VIEW AREA 7 NORMAL OPERATION 8 1.ON/OFF
Product Specification
Product Specification Product Mode TFT LCD Display APT TFT850C Abbreviation 850C Website www.elecycles.com 1 1. 2. 3. 4. Product Name TFT LCD display Model : APT TFT 850C Suppliers ELECYCLES Email : support@elecycles.com
C500B-LCD Instructions
C500B-LCD Instructions Nanjing Bigstone Electronic & Technology co.,ltd CONTENT ABOUT THE USER MANUAL........ 3 OUTLOOK AND SIZE........ 3 MATERIAL AND COLOR 3 BUTTON DEFINITION..... 4 FUNCTION SUMMARY....
KING-METER USERS GUIDE J-LCD
KING-METER USERS GUIDE J-LCD GUIDE 中文 1-15 页 English P/16-32 0 Contents 1 Preface.18 2 Appearance and Size.19 2.1 Material and color 19 2.2 Display Size and Installation Size 19 3 Function Summary and
C965 LCD Display User Manual
C965 LCD Display User Manual Supplier Brighton E-bikes Ltd. Stanford Gate, South Road Brighton, East Sussex BN1 6SB TEL: 01273 930700 Email: brightonebikes@gmail.com www.brightonebikes.co.uk 1. Product
Product Specification
Product Specification 12/2015 Product Mode Middle install intelligent LCD Display APT12LCD800S Abbreviation 800S Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building
Enoeco LCD Console CS-S900. User Manual V.2014
Enoeco LCD Console CS-S900 User Manual V.2014 1. Exterior Parameters Casing Material: ABS Display Material: High Hardness Acrylic (the same hardness value as tempered glass). Front View Side View Side
Product Specification
Product Specification January 2018 Product Model TFT LCD Display 850C (DPC-14) Abbreviation 850C-BF Brighton E-bikes. 2 nd Floor Southgate South Road Brighton Tel Email TEL: 01273 930700 Brightonebikes@gmail.com
Product Specification
Product Specification 07/2013 Product Mode Middle install intelligent LCD Display APT12LCD800S Abbreviation 800S Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building
Product Specification
Product Specification 04/2018 Product Mode TFT LCD Display APT TFT850C Abbreviation 850C Client Customer audit Supplier Tianjin APT Science and Technology Co., Ltd. 1001, Building 5 HuaDing, No.1 HuaKe
DP C10.UART CONTENT Content Normal indication area Introduction Button definition Appearances and dimensions Normal operation Specifications
CONTENT DP C10.UART CONTENT Content 1 Introduction 2 Appearances and dimensions 3 Specifications 4 Functional overview 5 Normal indication area 6 Button definition 7 Normal operation 7 Parameter setting
Product Specification and manual
Product Specification and manual Product Mode Dillenger C965 APT12LCD800S Supplier Dillenger OEM Factory 3, 13 Olympic Circuit Southport QLD 4215 Australia 1 Product Name 1.1 Dillenger C965 1.2 Model:APT12LCD800S
Product Specification
Product Specification Product Mode Abbreviation 750C Client Supplier TFT LCD Display 750C E-Drive E-Drive onderdeel van E.F.U. B.V. . Product ame TFT LCD display Model : TFT 750C 2. Suppliers E-Drive 3.
Product Specification
Product Specification 05/2014 Product Mode Middle install intelligent LCD Display APT12LCD800CAN Abbreviation 800S Client Customer audit Supplier 1001, Building 5 HuaDing, No.1 HuaKe 3 Road, Binhai hi-tech
EVBIKE LCD display C965 User manual
EVBIKE LCD display C965 User manual WWW.EV-POWER.EU - 1 - Contens: 1/ INFORMATION 2/ BASE SETTINGS 3/ ADVANCE SETTINGS 4/ ERROR CODES 5/ INSTALATION Thank you for purchasing EVBIKE product and we hope
Product Specification
Product Specification 11/2013 Product Mode Middle install intelligent LCD Display APT13LCD450U Abbreviation 450U Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building
1 LCD instructions. The figure of LCD display see below:
1 LCD instructions The figure of LCD display see below: 1 1.1 Power On/Off Press and hold Power button for 2 seconds can turn on/off the Meter. The Meter will automatically shut down when there is no operation
Product Specification
Product Specification 12/2012 Product Mode Middle install intelligent LCD Meter APT12LCD800U Abbreviation 800U Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building
LCD Display CS-850. User Manual V.2014
LCD Display CS-850 User Manual V.2014 1. Exterior Parameters Casing Material: ABS Display Material: High Hardness Acrylic (the same hardness value as tempered glass). Front View Side View Side View of
ELECTRIC BICYCLE METER KT LCD3 Product User Manual. User Manual. KT-LCD3 ebike Special Meter
ELECTRIC BICYCLE METER KT LCD3 Product User Manual User Manual KT-LCD3 ebike Special Meter WWW.SZKTDZ.COM 1 Contents Preface...4 Outlook and Size..4 Meter Dimension.. 4 Button Box Dimension...5 Main Material
ELECTRIC BICYCLE METER KT LCD3 Product User Manual. Contents
Contents Preface... 4 Outlook and Size... 4 MeterDimension 4 Button Box Dimension.. 4 Main Material and Color.... 5 Wiring Schematic.. 5 Installation Instruction... 5 Φ 31.8 handlebar diameters install
用户手册. User Manual. KT-LCD5 ebike Special Meter
用户手册 User Manual KT-LCD5 ebike Special Meter WWW.SZKTDZ.COM Contents Preface... 3 Outlook and Size.. 3 Meter Dimension 3 Main Material and Color....... 3 Wiring Schematic. 3 Installation Instruction..
1. Product Name. 2. Electrical Parameters. 3. Dimensions & Material. 4. Features. ! TFT LCD display. ! Model : DPC14. ! 3.
1. Product Name! TFT LCD display! Model : DPC14 2. Electrical Parameters! 3.2 inch IPS screen! 24V/36V/48V battery supply! Rated operating current : 40mA! Max operating current : 100mA (36V battery, with
用户手册. User Manual. S-LCD8 ebike Special Meter
用户手册 User Manual S-LCD8 ebike Special Meter WWW.BMSBATTERY.COM Contents Preface... 4 Outlook and Size... 4 Meter Dimension 4 Button Box Dimension..5 Main Material and Color.... 5 Wiring Schematic.. 5 Installation
用户手册. KT-LCD6 ebike Special Meter
用户手册 User Manual KT-LCD6 ebike Special Meter WWW.SZKTDZ.COM Contents Preface... 4 Outlook and Size... 4 Meter Dimension 4 Button Box Dimension.. 4 Main Material and Color.... 5 Wiring Schematic.. 5 Installation
用户手册. User Manual. KT-LCD2 ebike Special Meter
用户手册 User Manual KT-LCD2 ebike Special Meter WWW.SZKTDZ.COM Contents Preface... 3 Outlook and Size... 3 Meter Dimension 3 Main Material and Color... 3 Wiring Schematic.. 3 Installation Instruction... 4
广州谐同电子科技有限公司 Guangzhou Electrony Corporation 用户手册. User Manual. S-LCD3 ebike Special Meter
广州谐同电子科技有限公司 Guangzhou Electrony Corporation 用户手册 User Manual S-LCD3 ebike Special Meter WWW.ELECTRONY.CN Contents Preface... 4 Outlook and Size... 4 MeterDimension 4 Button Box Dimension.. 4 Main Material
DP E12.UART CONTENT CONTENT. Content 1. Normal indication area 6. Button definition 7. Introduction 2. Normal operation 7. Overview drawing 3
CONTENT DP E12.UART CONTENT Content 1 Introduction 2 Overview drawing 3 Specifications 4 Functional overview 5 Normal indication area 6 Button definition 7 Normal operation 7 Error code definition 8 DISPLAY
VLCD-5. VLCD-5 Display Instrument Operation Manual
VLCD-5 VLCD-5 Display Instrument Operation Manual CATALOG Summarize... 1 Specification... 1 Installation... 2 Function Description... 3 Operation Flow... 4 5.1 Button Definition... 4 5.2 Operation and
YUYANGKING Controller User Manual Bluetooth version
YUYANGKING Controller User Manual Bluetooth version 1.1 Download the Yuyangking App from Google Play or App store, Android version need system newer than 4.4.4 1.2 Start the YUYANG KING controller electric
User Manual. Borescope. Model THE STANDARD IN PRECISION MEASUREMENT
User Manual Model 20250-28 Borescope THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi-Sense Borescope (Model 20250-28) is ideal for the inspection of ductwork, wiring locations, piping, vehicles,
DRAG 2. Manual Instruction
DRAG 2 Manual Instruction Product description : 1. Appearance & Main Parameters: 510 Thread Power Button Screen + Up Button - Down Button Micro-USB Port Parameters : Size : 88.3 x 51 x 26.5mm Power Output
User Manual Video Borescope Model
User Manual Video Borescope Model 20250-27 THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi-Sense Video Borescope (Model 20250-27) is ideal for the inspection of ductwork, wiring locations,
MOBILE SAFETY DVR1543K. CLIP ON REARVIEW MIRROR KIT with 4.3-INCH LCD MONITOR FRONT & REAR CAR CAMCORDER with DUAL MOUNTING REVERSING CAMERA
MOBILE SAFETY DVR1543K REARVIEW MIRROR CAR DRIVING RECORDER KIT CLIP ON REARVIEW MIRROR KIT with 4.3-INCH LCD MONITOR FRONT & REAR CAR CAMCORDER with DUAL MOUNTING REVERSING CAMERA 3.0 MEGA PIXEL CAMERA
Multi-Function Smart Indicator User Manual
Multi-Function Smart Indicator User Manual EC30006 Content 1 Notice... 2 2 Specification... 2 3 Main parameter... 3 4 How to fix... 3 5 Port... 4 6 On/Off... 4 7 Charging... 4 8 Display... 5 9 Screen keypad...
5.6" Multi-function Monitor
5.6" Multi-function Monitor User s Manual Please read this Manual carefully before use of this product, and keep it handy for future reference. I. Packing List.. 2 II. Product Appearance... 3-5 III. Product
Table of Contents. Part I USB Communication. Part II User Interface. Part III User Settings (Tab Control) DFS-1000 Dataview. 2 File Menu.
2 Table of Contents Part I USB Communication 3 1 Important... Information 3 2 Connecting... Controller 3 Part II User Interface 4 1 Overview... 4 2 File Menu... 5 3 Options... Menu 6 4 Help Menu... 6 5
X-431 Volkswagen Diagnosis. Table of Contents INTRODUCTION...1
Table of Contents INTRODUCTION...1 FEATURES...1 Advanced...1 Open...1 Integrative...1 Flexible...1 HARDWARE CONFIGURATION...2 PORTS AND INDICATORS...3 PRINTER OPERATION...4 Mounting Paper...4 Printing
VR2 R-NET LED R-NET LCD. Controller System Operation
VR2 R-NET LED R-NET LCD Controller System Operation 1.VR2 Controller Operation 1.1 Controls/JSM 1.2 Button/Indicator 1.3 Control System Status indication 1.4 Module Wiring 1.5 VR2 Locking / Unlocking The
UC-2000 Installation Manual Unicorn Computers Technology Limited
UC2000 Installation Manual Copyright 2003. All rights reserved. Table of Contents Specifications 2 Enclosure for the UC2000 Controller 3 Unicorn Access Control System Configuration 4 UC2000 Controller
Phoebe LED Spectrum 10W RGB/Tuneable White downlight INSTALLATION AND APP INSTRUCTIONS
Phoebe LED Spectrum 10W RGB/Tuneable White downlight INSTALLATION AND APP INSTRUCTIONS Contents 1. Product Installation...4 2. Space Requirements & Wiring Diagram...6 3. App Set-up & Adding Lights...7
Car-Solutions.com Instruction Manual BENZ TAC2 for Mercedes Benz
Instruction Manual BENZ TAC2 for Mercedes Benz 1 INDEX 3 4 5 6 7 9 10 12 13 15 23 25 26 27 2 Specification 1. Main spec. 3 Specification 3. Diagram DIGITAL RGB RGB+Syn REAR CAMERA CAR COMMAND SYSTEM CAN
MEGA DIAL PANEL Instructions
2036 Fillmore Street Davenport, Ia. 52804 563-324-1046 www.racedigitaldelay.com MEGA DIAL PANEL Instructions WARRANTY AND DISCLAIMER DIGITAL DELAY ELECTRONICS INC. WARRANTS THE PRODUCTS IT MANUFACTURES
user and installation manual
SI3500 SI3500 ORBIT Digital Display The SI3500 is a member of the SI3000 Readout Family. All members of the family are marked SI3000 on the front panel. This manual is specifically for the SI3500 Model
SI3300. user and installation manual. 4-20mA/DC-Digital Display
SI3300 4-20mA/DC-Digital Display The SI3300 is a member of the SI3000 Readout Family. All members of the family are marked SI3000 on the front panel. This manual is specifically for the SI3300 Model with
3700 SERIES USER MANUAL
SAFETY GUIDE This manual contains the precautions necessary to ensure your personal safety as well as for protection for the products and the connected equipment. These precautions are highlighted with
LED Accu Penta 9x12W RGBWAU
Manual LED Accu Penta 9x12W RGBWAU Table of contents 1. Safety instructions... 3 1.1. FOR SAFE AND EFFICIENT OPERATION... 3 1.2. Additional Information for safety... 4 2. Introduction... 5 2.1. Statement...
MANUAL SURFACE ROUGHNESS TESTER TR-200 PARTNERS IN PRECISION
MANUAL SURFACE ROUGHNESS TESTER TR-200 PARTNERS IN PRECISION CONTENTS 1 Overview 5 1.1 Measurement principles 5 1.2 Standard configuration 6 1.3 Names of each part of the instrument 6 1.4 Basic connection
User Guide DMX TESTER
User Guide DMX TESTER Document Release Aug. 2006 Revision A Warranty Leviton Manufacturing Co Inc. warrants this control console to be free of material and workmanship defects for a period of two years
Downloaded from manuals search engine
INDEX 1. DVR Features...1 2. Layout 2.1 Front Panel...1 2.2 Rear Panel...2 2.3 Remote Control...2 3. Installation 3.1 Installing the Hard Drive...3 3.2 Connecting Camera and Monitor...3 3.3 Connecting
SPA DESIGN MICROPROCESSOR SPEEDO MANUAL
SPA DESIGN MICROPROCESSOR SPEEDO MANUAL SPA DESIGN MICROPROCESSOR SPEEDO INSTALLATION AND OPERATING MANUAL CONTENTS PAGE 2...INSTRUMENT FEATURES. PAGE 3...INSTALLATION DETAILS. PAGE 4...OPERATING INSTRUCTIONS.
M15S OPERATION MANUAL
M15S OPERATION MANUAL minikol ITALY www.minikol.com Index 1. Operation overview and general introduction... 1 2. Operation Modes... 2 2.1. Manual mode...2 2.2. Single mode...3 2.2.1. Setting target value...3
H Series PLC. ! : Indicates Compulsion. EH-150 Analog input module EH-AXH8M Instruction manual. Safety precautions DANGER CAUTION COMPULSION
H Series PLC EH-150 Analog input module EH-AXH8M Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction manual and all the
MIYAWAKI ULTRASONIC TESTER PM11 OPERATOR S MANUAL. Be sure to read this manual for safe and proper operation. Store this manual carefully after use.
GB MIYAWAKI ULTRASONIC TESTER PM11 OPERATOR S MANUAL Be sure to read this manual for safe and proper operation. Store this manual carefully after use. TABLE OF CONTENTS TO THE OWNER GB-0-2 1. SYMBOL INDICATION
PDC-X Digital Controller
Operator s Manual LOR Manufacturing PDC-X Digital Controller Publication PDC_X_MAN_02252015_US Version 1.0.1-1-gfdf1ed4 Copyright 2015 Thoroughly read and understand all information presented in this
TL240C Transparent Display User Manual
TL240C Transparent Display User Manual Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves
Product specification
Name:LED WIFI Controller Model:WF400 Product specification I. Product Summarization 第 1 页, 共 18 页 1. Product constitution NO. Name Instruction 1 WF400 Controller It is the core of product, is responsible
99 Washington Street Melrose, MA Phone Toll Free Visit us at
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Table of Contents 1. General Safety Requirements... 1 2. Safety Terms and Symbols...
ETM MD100 Drive System 1/2HP (370W) User Manual. Table of Contents. Drive Features
Table of Contents Drive Features... 1 Drive Specifications... 2 Certifications... 3 Installation - Drive Dimensions... 3 Motor Dimensions (mm)... 4 Drive Mounting... 4 Wiring... 5 I/O Terminals... 9 Menu...
Operating Instructions for Orderman Sol & Sol+
Operating Instructions for Orderman Sol & Sol+ 2010 by Orderman GmbH Bachstrasse 59, 5023 Salzburg Austria www.orderman.com Errors and misprints excepted. Duplication, reproduction or distribution, even
GPS+CAMTM. User Manual VS55020
VS55020 GPS+CAMTM User Manual Congratulations on purchasing the Vision System. This innovative product integrates the functions of a front view car video recorder, a rear view monitoring system, and GPS
HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions
HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction
WiFi 103 T3-CV T3-CC
Model: WiFi-103 T1 T2 T3 WiFi-103 T3-CV T3-CC 2. Configuration Diagram: WiFi-103 is a WiFi lighting control system, consists of APPs and WiFi controller. Controls various types of LED lighting products
ML-20IP INNOVATION DIRECT. IP video door station. User manual. Thank you for the choice of our equipment. { Design. Uniqueness. Innovations } SERIES
ML-20IP IP video door station User manual Thank you for the choice of our equipment Safety instructions Read and keep that manual. The device installation process should be carry out by the qulified specialists.
SD Card Mobile DVR Quick Guide
SD Card Mobile DVR Quick Guide Friendly Reminder When the new SD card loaded into MDVR, the storage device is automatically formatted during the initial start-up, then it will perform storage space preallocation.it
TABLE OF CONTENTS ADJUSTING YOUR LCD MONITOR
TABLE OF CONTENTS ADJUSTING YOUR LCD MONITOR -------------- 2 General safety precautions. 2 Unpacking your monitor 5 Viewing angle 6 How to open the back cover 6 Connecting your monitor 7 User controls
Instruction Manual. BMW APIX PAS for BMW
Instruction Manual BMW APIX PAS for BMW 1 INDEX Specifications 1. Main Spec./Feature--------------------------- 2. Diagram---------------------------------------- 3. Components-----------------------------------
HOME SECURITY KIT. USER MANUAL SMART PROTECTION WITH THE ALL-IN-ONE SOLUTION. SMART WINDOW SENSOR SMART POWER SOCKET SMART MOTION SENSOR SMART IP CAM
HOME SECURITY KIT. SMART PROTECTION WITH THE ALL-IN-ONE SOLUTION. SMART WINDOW SENSOR SMART POWER SOCKET SMART IP CAM SMART MOTION SENSOR USER MANUAL SL-900100/900111 HOME SECURITY KIT A/B SHORT INSTRUCTION
Tuff Tread. Grade Calibration
Calibration Instructions Version 1.9 Display Board NOTE: After you begin either of the calibration processes or the advanced parameter setup process, you must complete the process by pressing STOP repeatedly
Thank you for selecting Instrument Technology, Inc. (ITI) to fulfill your remote viewing needs.
INTRODUCTION Thank you for selecting Instrument Technology, Inc. (ITI) to fulfill your remote viewing needs. Since 1967, ITI has been the Leader in Remote Viewing. ITI consistently provides cutting edge
7.3 Inch Car Rear View Mirror Monitor with Mirror link Wide LCD Display Screen
ECER10 Approval No.: 10R-03 12762 ECER46 Approval No.: 46R-04 0019 7.3 Inch Car Rear View Mirror Monitor with Mirror link Wide LCD Display Screen User manual FK-073MA Designed in Grand Rapids MI, USA Assembled
CW-WW LEDWash USER MANUAL
LEDWash CW-WW USER MANUAL 1 1.BEFORE YOU BEGIN What is included Ø 1 x Fixture Ø 1 x Power cable with plug Ø 1 x User Manua Unpacking Instructions Immediately upon receiving a fixture, carefully unpack
YDEA C5 User Manual. Welcome to use products of YDEA! We are appreciated if our user. manual offers help and convenience to you when you are using or
YDEA C5 User Manual Version: 2-0-5 Statement Respectable Users: Welcome to use products of YDEA! We are appreciated if our user manual offers help and convenience to you when you are using or learning
Handheld Tool for VAV compact and modular controllers
s OpenAir VAV Handheld Tool AST20 Handheld Tool for VAV compact and modular controllers For configuration and maintenance of OpenAir VAV compact and modular controllers: For use in OEM factory for configuration
Precautions. Please read carefully before using this product.
Thank you for purchasing this BEWITH Mirror Media MM-1. It is designed to give you many years of enjoyment. Please read all instructions in this manual before attempting operation and keep it handy for
Model BS-150. Instruction Manual. Video Inspection Camera. reedinstruments. www. com
Model BS-150 Video Inspection Camera Instruction Manual reedinstruments com Table of Contents Safety... 2 Features... 3 Specifications...3-4 Instrument Description... 5 Operating Instructions...6-8 Safety
Features. Warnings and Precautions READ BEFORE OPERATING EQUIPMENT SAVE THESE INSTRUCTIONS
SENTA Warnings and Precautions READ BEFORE OPERATING EQUIPMENT SAVE THESE INSTRUCTIONS To prevent damage to your radio or possible injury to you or others, read these safety precautions and instructions
Contents. Packing List. VILTA Mobile. Overview. Portable Bag. Quick Start. Charging Cable. Start Up. Lanyard. Specifications.
www.freevisiontech.com Feel free to share your photos and videos with us and we might put them on our website. User Manual Facebook.com/FreevisionVILTA Twitter.com/FreeVisionVILTA instagram.com/freevision_vilta
ATTENTION. Custom Dynamics CCM-6 Bluetooth Remote Installation Instructions. Package Contents: - Bluetooth Remote Module (1) - Remote Key Fob (2)
Custom Dynamics CCM-6 Bluetooth Remote Installation Instructions We thank you for purchasing the Custom Dynamics CCM-6 Bluetooth Remote Module. Our products utilize the latest technology and high quality
Wireless Digital Video Doorbell
Wireless Digital Video Doorbell User s Manual Door Camera Indoor Handset Remark Please follow the user manual for correct installation and testing, if there is any doubt, please call our tech-supporting
HL 50 User Guide. (English Edition) Simple Acoustic Leak Detector. Version 1.0 P/N:
HL 50 User Guide Simple Acoustic Leak Detector (English Edition) Version 1.0 P/N: 4.04.000063 SebaKMT All rights reserved. No part of this handbook may be copied by photographic or other means unless SebaKMT
Declaration X-100 PAD
Declaration 1. This manual is designed for the usage of, applying to X-100 PAD automotive diagnosis platform. No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any
Table of Contents. 3.1 Front/Rear Panel and User Interface Front Panel Rear Panel User Interface...
General Warranty OWON warrants that the product will be free from defects in materials and workmanship for a period of 2 years (1 year for accessories) from the date of purchase of the product by the original
PLC-24V10AL(-PT/-TH) Quick Start Manual (Rev.1.10)
TEC (Peltier) Controller PLC-24V10AL(-PT/-TH) Quick Start Manual (Rev.1.10) Thank you for purchasing the TEC (Peltier) Controller PLC-24V10AL. Read these operating instructions carefully to ensure effective
IS-S0108 Single Switch Solution
IS-S0108 Single Switch Solution IS-S0108 Single Switch Solution Revision D NKK SWITCHES 7850 E. Gelding Drive Scottsdale, AZ 85260 Toll Free 1-877-2BUYNKK (877-228-9655) Phone 480-991-0942 Fax 480-998-1435
LT-200 Controller Manual 1 / 8. LT-200 Controller. (Version V5.00) Manual. ( Please kindly read this manual carefully before use.)
LT-200 Controller Manual 1 / 8 LT-200 Controller (Version V5.00) Manual ( Please kindly read this manual carefully before use.) LT-200 Controller Manual 2 / 8, Forword, Thanks for choosing our LT-200 Controller.
HAT600 Series HAT600/HAT600I/HAT600B/HAT600BI ATS CONTROLLER USER MANUAL
HAT600 Series HAT600/HAT600I/HAT600B/HAT600BI ATS CONTROLLER USER MANUAL ZHENGZHOU SMARTGEN TECHNOLOGY CO.,LTD CONTENT 1 OVERVIEW... 5 2 PERFORMANCE AND CHARACTERISTICS... 6 3 SPECIFICATION... 8 4 OPERATING...
MTP INSTRUCTION MANUAL
MTP INSTRUCTION MANUAL Wireless Electricity Monitor Model MTP-3100 MTP Instruments Inc. Table of Content 1. Introduction Page 1 2. Safety and Maintenance Information Page 1 3. Features / Specifications
STEP MOTOR DRIVER SMD-4.2DIN
SMART MOTOR DEVICES http://www.smd.ee STEP MOTOR DRIVER SMD-4.2DIN manual SMDDIN.42.001 2018 1. Product designation Step motor controller SMD-4.2DIN is an electronic device designed to operate with 2 or
Loup Electronics Planter Monitor LPM II. User Guide
Loup Electronics Planter Monitor LPM II User Guide TABLE OF CONTENTS 1. I TRODUCTIO...4 2. LIQUID CRYSTAL DISPLAYS...8 2.1 UPPER LCD...8 2.2 LOWER LCD...9 3. OPERATI G SPECIFICATIO...10 3.1 OPERATING MODES...10
MOBILE CONNECTOR - GEN 2 OWNER'S MANUAL
MOBILE CONNECTOR - GEN 2 OWNER'S MANUAL UNITED STATES Contents Safety Information... 2 Save These Important Safety Instructions... 2 Warnings...2 Cautions...3 General Information... 4 Mobile Connector
Installation Instructions
Alliance Arming Station AL-1111, AL-1116 1048520C September 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Alliance Arming Station for models AL-1111 (four-line LCD) and AL-1116 (four-line
SF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014
SF200 Installation Guide & Quick Start Guide 2 TFT AC Terminal Version: 1.0 Date: June 2014 All design and specification declared are subject to change without notice in advance. Contents Safety Precautions
ARCTIC AIR DC OLED. Digital Control Operations Manual
ARCTIC AIR DC OLED Digital Control Operations Manual Micro Air Corporation Phone (609) 259-2636 124 Route 526 WWW.Microair.net Allentown NJ 08501 Fax (609) 259-6601 Before you start: 1. Applying power: