Product Specification

Size: px

Start display at page:

Download "Product Specification"

Evan Cross
5 years ago
Views:

1 Product Specification 05/2014 Product Mode Middle install intelligent LCD Display APT12LCD800CAN Abbreviation 800S Client Customer audit Supplier 1001, Building 5 HuaDing, No.1 HuaKe 3 Road, Binhai hi-tech Industrial Development Zone, Tianjin, China Tel TEL: FAX: yzhao@aptdevelop.com 1 TEL:

1 Product Name 1.1 The Middle install intelligent LCD Display 1.2 Model:APT12LCD800CAN 2 Suppliers 2.1 2.2 Email : yzhao@aptdevelop.com apt@aptdevelop.

2 1 Product Name 1.1 The Middle install intelligent LCD Display 1.2 Model:APT12LCD800CAN 2 Suppliers yzhao@aptdevelop.com apt@aptdevelop.com 3 Electrical Parameters 24V/36V battery supply Rated operating current : 100mA Max operating current : 150mA Off leakage current < 1uA Max output current to controller : 50mA Operating temperature : -30~70 Storage temperature : -40~70 4 Dimensions & Material 4.1 Product shell is ABS, transparent window is made with high strength Acrylic, the stiffness equals the tempered glass. 4.2 Dimensions : host/l90mm*w54mm*h13.3mm 2 TEL:

Software can be updated online. Suitable for low temperature,max -30.

3 5 Features CAN-BUS system. Percentage battery indicator. Battery information & error indicator. Remaining mileage calculate(dst). Software can be updated online. Suitable for low temperature,max -30. Ergonomic external button design, easy to operate. Speed display : AVG SPEED, MAX SPEED, SPEED(Real-time). 3 TEL:

4 Kilometer / Mile optional. The brightness of the backlight adjustable : 5-sections. 9 assist level max, 3-level/5-level/7-level/9-level optional. 6KM walk Mileage indicator : Odometer/Trip distance/dst Mileage / Riding time Brake Tips Error indicator 6 LCD instructions The figure of LCD: Speed mode Speed display Battery indicator The percentage of remaining capacity Lamp Brake PAS level ERROR code Mileage mode Mileage information 7 Functional Description 4 TEL:

7.1 Power On/Off Press and hold Power button for 1 second can turn on/off the display. The Display can automatically shut down when there is no operate & ride for X minutes(x could be 0~9). 7.

5 7.1 Power On/Off Press and hold Power button for 1 second can turn on/off the display. The Display can automatically shut down when there is no operate & ride for X minutes(x could be 0~9). 7.2 ASSIST level operating Short press UP/DOWN button can change the assist level. Top level is 9, 0 for neutral. Level quantities can be adjusted according to the customer requirements. PAS operating 7.3 Speed mode switch& Mileage mode switch Short press POWER button can change the speed mode& the mileage mode, Speed->AVG Speed->MAX Speed->Trip->ODO->DST->Time. DST is the remaining mileage that is calculated by display on real-time. It can change a lot with different riding mode (assist level) 5 TEL:

AVG speed MAX speed Speed Trip Time DST ODO Speed mode switch& Mileage mode switch *If there

4 Headlight/backlight On/Off Press and hold UP button for 1 second can turn on/off the

The motor does not work when the battery voltage is low, Display still can keep the headlight

6 AVG speed MAX speed Speed Trip Time DST ODO Speed mode switch& Mileage mode switch *If there is no operation for 5 seconds, display will return Speed (Real-Time) display automatically. 7.4 Headlight/backlight On/Off Press and hold UP button for 1 second can turn on/off the headlight/backlight. The motor does not work when the battery voltage is low, Display still can keep the headlight on for a while when E-bike is in riding km walk Press and hold DOWN button for 1 second can get into walk mode, out of the mode when release the button. 6 TEL:

7.6 Data cleanup Press and hold UP & DOWN buttons together for 1 second can reset several temporary data, temporary data include AVG Speed / MAX Speed / Trip / DST/Time.

Short press UP/DOWN buttons to change the parameter value, short press POWER button can switch to the next parameter. Double press POWER button(press interval less than 0.

7 7.6 Data cleanup Press and hold UP & DOWN buttons together for 1 second can reset several temporary data, temporary data include AVG Speed / MAX Speed / Trip / DST/Time. 8 Parameter setting Double press POWER button(press interval less than 0.3 second) can get into parameter setting state, the parameter twinkles. Short press UP/DOWN buttons to change the parameter value, short press POWER button can switch to the next parameter. Double press POWER button(press interval less than 0.3 second) can quit from the parameter setting state. The display will automatically quit the parameter setting state when there is no operation for 20 seconds. The order of parameters is as follows. Kilometer/Mile Backlight brightness Contrast ABL ON/OFF Auto off tome While diameter Magnetic Pole HALL number MAX current Speed limit set Password Product Serial number Battery health PAS Level set Torque Grip BMS temperature Motor temperature Controller temperature Full charged Capacity Recharge Cycle 8.1 Kilometer / Mile : The location of speed displays symbol Un1, press UP/DOWN button rotate display the symbol km/h / MPH (Km / Mile) 7 TEL:

8 8.2.Backlight brightness: The location of speed displays symbol bll, press UP/DOWN button display symbol LeveL1~ LeveL5 to change the brightness of the backlight. Level1 is backlit darkest, Level5 is the brightest. 8.3 Contrast:The location of speed displays symbol Con, press UP/DOWN button to change the value fromlevel1 to LEVEL4, Level1 is the highest contrast. 8.4 Auto backlight ON/OFF: The location of speed displays symbol AbL, press UP/DOWN button to change ON or OFF. ON - backlight turn on when the display power on. OFF- backlight turn off when the display power on. 8 TEL:

9 8.5 Auto off time : The location of speed displays symbol OFF, press UP/DOWN button to change the value from1 to 9, the number represent delay time (minutes) before display shutdown automatically, default value is 5 minutes. 8.6 Wheel diameter: The location of speed displays symbol dir, press UP/DOWN button rotate display the symbol 16inC~29inC, value represents the diameter of the wheel (inch). Wrong value for wheel diameter will cause speed&mileage abnormal. 8.7 Password: The location of speeds displays symbol PSd, press and hold the POWER button(more than 1 second) can get into password input status, press UP/DOWN buttons to change the password value (0~9), short press POWER button to switch the password item, password is 4 digits, the default password is "1919". Press POWER button when password adjustment is completed. Display will return to the 9 TEL:

10 Kilometer / Mile item if the password is incorrect. Correct password will enter to the Speed limit set item. 8.8 Speed limit set: The location of speed displays symbol SPL, the location of mileage displays speed limit value, the default value is 25km/h. Press and hold POWER button for 1 second can get into setup status, press UP/DOWN buttons to modify the value, the value can be set from 10 to 45km/h. Press POWER button to confirm when you finish the adjustment. The maximum speed is restrict by the motor and controller. 8.9 MAX Current set: The location of speed displays symbol CUL, the location of mileage displays current limit value, the default value is 15A. Press POWER button (press more than 1second) can get into Character flashing state, then press UP/DOWN buttons to modify the value, the value can be set from 6 to 50A. Press POWER button to confirm when you finish the adjustment Magnetic pole number of Speed sensor : The location of speed displays 10 TEL:

11 symbol oha, the location of mileage display magnetic pole number, the default value is 1, Press POWER button (press more than 1second) can get into Character flashing state, then press UP/DOWN buttons to modify the value, the value can be set from 0 to 15. Press POWER button to confirm when you finish the adjustment Magnetic pole number of assist sensor : The location of speed displays symbol SHA, the location of mileage displays magnetic pole number value, the default value is 12, Press POWER button (press more than 1second) can get into Character flashing state, then press UP/DOWN buttons to modify the value, the value can be set from 0 to 15. Press POWER button to confirm when you finish the adjustment Battery health display items: The location of speed displays symbol HEA, the location of mileage displays the current state of health of the battery (range of 0% -100%), Unit: % Range of assist level setting: The location of speed displays symbol AST, the location of mileage displays assist range, the default is 0-9. Press UP/DOWN button to change the value from0-3 to 0-9, Press POWER button to confirm when you finish the 11 TEL:

12 adjustment Torque sensor value: The location of speed displays symbol TOQ(Torque), the location of mileage displays the current value of the torque sensor ADC Throttle sensor value: The location of speed displays symbol GIP(Grip), the location of mileage display the sensor s AD value Battery cycle times: The location of speed displays symbol CYC(Cycle times), the location of mileage displays the cycle value. 12 TEL:

13 8.17 Battery s Full Charged Capacity: The location of speed displays symbol CAP(Full Charged Capacity), the location of mileage displays fully charged battery full charge capacity value, unit: mah Controller Temperature: The location of speed displays symbol CTE(Controller Temperature), the location of mileage displays the temperature of controller. Unit: C Motor Temperature: The location of speed displays symbol OTE(Motor Temperature), the location of mileage displays the temperature of Motor. Unit: C. 128 means invalid BMS Cell Temperature: The location of speed displays symbol ETE (BMS Cell Temperature), the location of mileage displays the temperature of the battery, unit: C. 13 TEL:

14 8.21 Display s Serial Number: The location of speed displays symbol PSN(Product Serial Number), Show display s serial number scrolling. 9 Error Code description 800CAN display can show error message, it displays icon and the error code is in speed position. Different icon d,c,b represent the different error sources. d represent error is detected by display, C represent error is detected by controller, b represent error is detected by battery. Error reported by display : d shows on the assist level position represent the display reported an error message. There are 3 kind of error that can be detective by display. 1E represent communication error with controller, 2E means communication error with battery, 3E means communication error with both of them. 14 TEL:

15 Error reported by controller: C shows on the assist level position represent the controller reported an error message. Error code description on the table below. Error Code Error description Handle 1E Communication Error Check the cable connection 2E Controller protection Check three-phase power line. 3E three-phase power error Check three-phase power line connection 4E Battery low Charge the battery 5E Brake error Check the brake connection. 6E Throttle error Check turn to connect. 7E Hall error Check the hall connection 8-99E Reserved Please contact the manufacturer for error definitions Error reported by battery: b shows on the assist level position represent the battery reported an error message. Error code description on the table below. Error Code Error description 01E Over Voltage 02E Under Voltage 04E Over discharge 08E Over change 10E Over discharge temperature 20E Over charge temperature 40E Under discharge temperature 80E Under charge temperature Remarks : Error code will be show on display for 3 seconds after the malfunction has been cleared. 10 Assembly instructions Display screw assembly see the figure below, note the screw tightening torque, display damage caused by excessive torque is not covered by warranty. 15 TEL:

16 There are 2 directions for the clamp installation, forward or backward. Different assembly methods will need different cable length. 16 TEL:

2mm, transfer ring must be assembled with the special directions, pay attention to the green

17 Clamps suit for 3 size of handlebar, 31.8mm, 25.4mm, 22.2mm, there are transfer rings for 25.4mm and 22.2mm, transfer ring must be assembled with the special directions, pay attention to the green arrow below. 11 Output wire instructions 1 Red wire : Anode(24v/36v) 2 Blue wire : Power cord to the controller 3 Black wire : GND 4 Green wire : CAN H 17 TEL:

18 5 Yellow wire : CAN L 12 PAS level instructions PAS level can be customized, the highest level is 9, common used PAS level see the table below: 3 level 5 level 9 level 0 0 No power assist Certification CE / IP65 (water proof) / ROHS. 18 TEL:

Product Specification

Product Specification 07/2013 Product Mode Middle install intelligent LCD Display APT12LCD800S Abbreviation 800S Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building