Table of Contents 1.Precautions 2.Accessories 3.Appearance 4.Remote Control Application 5.Basic Operation Methods 6.DVB-T Menu Operation

Transcription

1

2

3 Table of Contents 1.Precautions 2.Accessories 3.Appearance 4.Remote Control Application 5.Basic Operation Methods 6.DVB-T Menu Operation 6.1.Auto installation 6.2.Installation setup 6.3.Program receive and shift 6.4.Program search function 6.5.Main menu option 6.6.Parental control 6.7.System setup option 6.8. Accessory Setting 6.9.Game menu option 6.10.DIY menu setting 6.11.Error message 6.12.Menu Analog quantity 6.13.Off-time setting 7.ATV Menu Operation 8.In Order to Receive clearer picture 9.Before you request for repair 10.Technical parameters

4 1. Precautions Storage and Keeping Keep this machine away from too hot or too cold places The storage temperature of this machine is -20~ 60, the application temperature of this machine is 5~35 Never use this machine near bathtub, washbasin, and kitchen, etc places with water or at damp basement, swimming pool or similar places Never make the TV set under effect of moisture, dust or oil smoke etc environment Avoid this machine from dropping or impacting Never put this machine within certain box at your will or place it at toooscillating place and under further severe collision Never extrude or chafe this machine with sharp objects Maintenance Please plug off all connection wires before you start cleaning this machine. Please wipe the machine cover, display screen and buttons with soft cloth dipped with little soft abluent Alcohol Never wipe this machine with abrasion cloth, abstergent powder, alcohol and benzene etc various propellants or chemical cleaning media -1-

5 Operation Precautions 1.Only the attached AC adapter and the automobile adapter (9V) are suitable. 2.For the sake of safety, when you do not intend to use the display, please unplug the AC adapter or automobile adapter. Earphone Operation Precautions 1.Please don't tune your headphone / earphone at too high volume, otherwise, it may lead inconvenience and danger to yourself and other people. 2.For open-designed earphone, to avoid influencing your periphery, please tune down the volume. 3.In case of any tinnitus, please tune down the volume or stop using this machine. 4.It is recommended by the aurists that the earphone should not be continuously used for a prolong period.! Warning! 1. For the sake of safety for yourself and others, please do not watch or turn on the TV set while driving. 2. It is very dangerous to watch or operate TV while driving.! Special Notice A few highlights or dark spots may occur on the LCD screen. It is a very common phenomenon of the active matrix display technology, and does not mean any defects or faults. Never try to repair this machine by yourself. In case of any fault or failure, please turn off the display at once, and notify our Company or the corresponding dealer. The display is made up of many precision electronic components. Any disassembly or modification may lead to further damage. -2-

6 C G G O E E G 2. Accessories AC adapter adapter AV in/out cord - Remote control Digital TV antenna AAA type batteries se support Double-side adhesive tape for base support -3-

7 3. Appearance -4-

8 4. Remote Control Operation Power on/off / Standby Mute Input numbers/ Channel keys Channel Adjust Main Menu Volume Adjust DVB Music Shift OSD Language Select Return to the previous program Turn on Teletext My Favourite Channel on/off Nine Picture Guide Enter Game menu DVB/ATV/AV Shift Analog quantity adjust Menu TV/ Radio Return Teletext TV/AV Info CALL OK Lang FAV EPG Exit Audio Search/Auto Prlist Guide Game Pause Mode - + Sleep Display Electronic Program Guide Information Display Return to Last Program/Menu(Exit) DVB Confirm L/R Sound Output Shift Auto Search/ Auto adjust Program Edit Table Pause Sleep time/ Clock setup Picture Mode Caution 1.Please align the remote control with the infrared-receiving window on TV set in operation. 2.Never oppress, drop, wet or disassemble the remote control. 3.Never press any button continuously and swiftly. Operation interval is at least 2 seconds. 4.Press Power to turn on the TV before pressing CH+, CH- for channel selection. 5.If the remote control were not to be used for a long time, please remove batteries. Channel keys (digit keys (0-9) and - / - - ): There are 0 ~ 255 in total of 256 channels available on the remote control for your option by the 11 buttons of 0-9 and - / - - on the remote control. When the channel is a one-digit figure, just press the corresponding digit key. If the channel is a two-digit figure, you should press - / - - first to show - - on the display screen before further pressing the corresponding digit keys. (ATV mode only) -5-

9 POWER (Power On / Off): Press this button to turn off the TV, press it again to turn on the TV. LANG: Press this button to realize the switch of German, French, Dutch, English, Spanish, Portuguese and Italian OSD menu language. SEARCH: (Auto adjust) Start Auto search in DVB mode. Press and hold for 5 seconds to realize auto search in ATV mode. FAVORITE PR: My Favourite Channel option on/off (DVB mode only). GAME: Press this button to enter the game menu(dvb mode only). TELETEXT: Turn on the teletext option to watch teletext information (DVB mode only). GUIDE: Enter nine picture guide function (DVB mode only). PRLIST: Enter the Program Edit List function (DVB mode only). EPG: Press this button to display Electronic Program Guide (DVB mode only). INFO: Press this button to display the information of current program(dvb mode only). MENU: Press this button to display the main menu. EXIT: Return to last program or menu. CH+ / CH- (Channel select): Press CH +,the number of TV channel increases. Press CH -, the number of TV channel decreases. VOL-/+ (Volume adjust): Press VOL-, the volume of TV set decreases. Press VOL+, the volume of TV set increases. OK: Confirm key (DVB mode only). MUTE (Mute):Press this button, the sound will disappear. Press it again or pressvol+/vol- to resume the normal sound. AUDIO: Press this button to realize the switch of L/R sound output. 0,1,2,3,...,9: Channel keys: Press to chose the corresponding channel. Press 0-9 digital keys to chose a two-digit or three-digit channel. Pause (DVB mode only): Press it to pause the picture or sound. TV/RADIO: Shift between TV and Radio (DVB mode only) Sleep: Off-time setup.you can set Sleep Time to automatically turn off the TV set within 120 minutes. Return: Press this button to return to the previous channel.press it again to return to the current channel. DVB/ATV/AV shift: Press this button to shift between Digital TV, Analogue TV and Vedio/Audio(AV) -6-

10 +/-: Bright, contrast. Color, and TINT analog quantity adjust.(only DVB mode) Press Mode, then press +/- to adjust the analog quantity of bright, contrast, color or TINT. Mode:(Picture mode) a. In DVB mode, press this button to select the items between bright, contrast, color and TINT. Then press +/- to adjust the analog quantity of the chosen item. b. In ATV mode, press this button to realize the five picture modes: Standard, Soft, Vivid, Light and Personal. -7-

11 5. Basic Operation Methods Basic interface connection 5.1.Connection of Power Supply: Align the power supply plug on AC adapter with the jack on the machine cover marked with DC9V. 5.2.Connection of Stereo Earphone: Align the earphone plug with the earphone jack on the TV set, and just plug in. Notice If the earphone is applied, the sound only transmits through the earphone, and no sound is available from the loudspeaker of the TV set. 5.3.Connection of AV Input Just insert the plug of the external video cord into the yellow port of the AV exchange head and the audio left track plug into the white port and audio right track plug into the red port. Then insert the AV head into AV IN jack of the TV set. -8-

12 5.4.Connection of AV Output Connect the yellow port of the AV output head to video jack, the white port to the audio left track plug, the red port to the audio right track plug. Then insert the AV head into the AV OUT jack. Notice The AV output function is available when using DVB function only. Basic operation methods of TV set 1. Connect with power supply and press the power key. In normal status, the power light is green. If the light is red, press the Power key to turn on the TV set. 2. Pull out the telescopic antenna. 3. Press CH-/CH+ to choose the desired channel. 4. Adjust the sound volume of the TV set. Notice The OK key on panel is available as confirm OK only when DVB function is operating. In ATV mode, press and hold for 5 seconds to realize auto search; In AV mode, this key does not work. -9-

13 6. Menu Operation 6.1. DVB-T TV receiver automatic installation First Time Installation. (The Program table does not exist.) The system will automatically start the First Time Installation when the TV is turned on. Please set up the installation as illustrated. The system may not start the First Time Installation at status as below: 1.The First Time installation has been set before. 2.The Program table is not empty. If you want to start the First Time Installation again, please do as below: 1.Delete all channels in the program list. 2.Set Factory Default at additional option setting. Cancel first time installation Press VOL+/VOL- to move the cursor to YES or No. Press OK key to confirm. YES: Start First Time Installation. NO: Cancel First Time Installation. Select country (Receiving the local system) Press VOL+ or VOL- key on the remote control to select Country at the standard of local TV system. Press CH+ or CH- key on the remote control to move the cursor to made other selection. -10-

14 Select menu language Press VOL+/VOL- to select language menu. Press CH+ or CH- to move the cursor to other items. Press VOL+/VOL- to move the cursor to BACK or NEXT item. Press OK key to confirm. Skip to the next menu page Press VOL+/VOL- key to move the cursor to BACK, YES or NO item, Press OK key to confirm. BACK: Skip to the last menu page. YES: Delete program list and start Auto Search. NO: Cancel Auto Search. Start program auto search Step 1 Auto searching... Notice: During auto searching, do not press any key on the remote control or panel. Otherwise it may interrupt the search progress. -11-

15 Step 2 Auto searching... The program list display. Step 3 Auto Search has been finished. Data saving... Step 4 Auto Search has been finished. Press CH+/CH- to watch the program. -12-

16 6.2.Installation Setup Please follow the steps below to set up: Step 1 1.Press MENU key to display Main Menu. 2.Press CH+ or CH- key to move the cursor to select System Setting sub-menu. 3.Press OK key to enter System Setting menu. Step 2 4. Press CH+ or CH- key to move the cursor to select Regional Setting menu. 5.Press OK button to confirm. Step 3 6.Press CH+ or CH- key to move the cursor to select Country item. 7.Press VOL+ or VOL- key to set the located Country. 8.After setting, press EXIT key twice to return to Main Menu. -13-

17 Step 4 9.Press CH+ or CH- key to move the cursor to select Program Search item. 10.Press VOL+ key to enter the program search menu. Step 5 12.Press CH+ or CH- key to move the cursor to select Automatic Search item. Press OK key to continue the next step. Manual search can be used to search the certain frequency which is existent. It is suitable for professionals to operate. Step 6 13.Press VOL+/VOL- key to move the cursor to select OK item, then press OK key to continue next step. Step 7 14.Press VOL+/VOL- key to move the cursor to select YES or NO item. Press OK key to start Auto Search. YES: Delete channel list and start auto search. NO: Keep channel list and start auto search. -14-

18 Step 8 15.Auto searching... Step 9 16.Auto searching... The channel list display. Step Auto Search has been finished. Data saving... Step Auto Search has been finished. Press CH+/CH- to watch the TV program. -15-

19 6.3.Program receive and shift Program preview After finishing auto search, you can enjoy watching high quality TV programs. Press OK key, and program preview picture will be displayed as illustrated. Press CH+ or CH- key to move the cursor to select channels in the Program list. Press OK button to confirm. Input the channel number on the remote control You can input the channel number on the remote control to select your desired programs. Press OK to confirm. Nine Pictures Guide This DVB-T TV set provides Nine Picture Guide function. Press GUIDE key to start the function and press CH+/CH- or VOL+/VOL- key to move the cursor to select program image. Press OK button to confirm. -16-

20 Electronic Program Guide This digital TV set supports Electronic Program Guide (EPG) function. Press EPG key to start the function. To run EPG, the program signal must contain EPG data. EPG Time Table Press VOL+ key to enter EPG Time Table. You can browse the program guide of that day. Press VOL+ key to move the cursor to choose the program items. Press EXIT button to return to the previous page. Program details While program items list is displayed, press OK key to browse the program details. Press EXIT key to return to the previous page. Press EXIT key several times to return to normal playback. Teletext Display Step1 This DVB-T TV set supports Teletext Display. Press Teletext key to start the function. Press VOL+ or VOL- to select Teletext or Teletext Subtitle To display Teletext, the program signal must contain teletext data. -17-

21 Step 2 Press CH+/CH- key or input the page number on the remote control to change display pages. Press EXIT key to return to normal playback. To display Teletext, the program signal must contain teletext data. Step 3 To Teletext Subtitle,the program signal must contain the data 6.4.Program Search Function Program Search Menu For the first installation of the TV set, it is recommended to perform program search function. So you can renew the channel list and receive program picture normally. If program parameters have been renewed, you must run program search function again and renew the channel list of the TV set. Manual Search Under the Installation Menu, press CH+ or CH- key to move the cursor to select Manual Search item. Press OK key to continue the next step. Manual search can be used to search the certain frequency which is existent. It is suitable for the professional to operate. -18-

22 Manual Search Setup Under the main menu, press CH+ or CH- key to move the cursor to select the Channel Number. Press VOL+ or VOL- to change to the desired channel number. Press CH+ or CH- key to move the cursor to select OK item. Press OK key to start Manual Search. Manual Searching Manual Searching... (Press any key on the remote control to exit manual search.) Finish Manual Search Manual Search is finished. System Saving Press MENU key to save the setting and return to normal playback. -19-

23 6.5.Main Menu Operation Program Edit Table Press MENU key to display Main Menu, then press CH+ or CH- key to move the cursor to select Program Editing item. Press VOL+ to enter Program Editing function. There are three options in it :TV program list, Radio program list and the sort of order for programs. There are three options in Program List Press CH+ or CH- key to move the cursor to select TV Program List or Radio Program List. Press OK to enter. (The setting for Radio program list is the same as for TV program list. Below is an examples for TV program list setting) There are three options in TV Program List or Radio Program List For the three options, press CH+/CH- key to move the cursor to select the item you like. Press OK to confirm and press OK again to cancel.. Edit My Favorite Program This digital TV set supports My Favorite Program function. You can mark programs you like to be My Favorite Program. Press OK key to confirm and press again to cancel. After marking, press MENU key several times until the system saves setting and return to normal playback. Press Favorite PR key to start My Favorite Program, then press CH+ or CH- to choose programs among all My Favorite Programs. Press Favorite PR key again to exit. When My Favorite Program is started, press PR List key to display My Favorite Progran List. -20-

24 Move Program Delete Program Sort for Programs Select methods for sort After Sorted Under Program Edit Table menu, press VOL+ or VOL- key to move the cursor to the Move row of program table, Press CH+ or CH- to move the cursor to the desired position. Press OK key to confirm. And press OK key again to cancel. After setting, press MENU key then the system will save the setting automatically and return to normal playback. Under Program Edit Table menu, press VOL+ or VOL- key to move the cursor to the Del row of program table, Press CH+ or CH- to move the cursor to the program you want to delete. Press OK key to confirm. And press OK key again to cancel. (More than one can be selected.)after setting, press MENU key then the system may save the setting automatically and return to normal playback. The deleted program can not be resumed unless the Program Search function is restarted. Notice: You need to enter PIN number to delete all programs to enter search or start the first time installation while parental control lock is in ON status. But in OFF status, no PIN is required. After returning to the factory default, the parental lock is set in OFF status. Under Program Edit Table menu, press CH+ or CH- key to move the cursor to Sort item. Press OK to enter Sort menu. Press CH+ or CH- to move the cursor to the desired position. Press OK key to confirm. Display as left after sorted. Press Exit to return to last page. Press MENU key several times to save the setting and return to normal playback. -21-

25 6.6.Parental Control Setup Parental Control Some program is not suitable for kids or youth. Parents can start Parental Control function to lock and restrict some program to be displayed. Press MENU key to display Main menu, then press CH+ or CH- key to move the cursor to select Parental Control item. Press OK key to continue the next step. Set PIN Input a four- digit PIN, then press OK key to confirm. If the PIN is correct, Parental Control function starts. The default PIN of this DVB-T TV set is preset as Channel Lock Under Parental Control menu, press CH+ or Ch- key to move the cursor to Channel Lock item. Press OK key to continue the next step. Start Channel Lock Parental Setting Press CH+ or CH- key to move the cursor to YES or NO item. Press OK key to confirm. The system will return to Parental Control menu. YES: Start Channel Lock. NO : Cancel Channel Lock. Lock up the programs on Parental Setting list Press CH+ or CH- key to move the cursor to Parental Setting item. Press OK key to confirm and then continue the next step.

26 Select Programs To Be Locked Press CH+ or CH- key to move the cursor to select the program to be locked. (More than one can be selected.) Press OK key to confirm or press OK key again to cancel. Press MENU key several times till the system saves the setting and returns to normal playback. To protect programs, you must start Channel Lock function, Protected Program To display protected programs, you must input the correct PIN. Please input four digit number and press OK key to confirm. Change PIN System PIN can be set under this menu. Press CH+ or CH- key to move the cursor to select Change PIN. Press OK key to confirm and get into the next step. Confirm Renew Input old PIN and new PIN in order. (Press OK key to confirm) Then press OK key to realize OK item. PIN Code Change -23- Press OK key to confirm. Press MENU key several times till the system saves the setting and returns to normal playback. Notice: Please remember the new PIN after the change.

27 6.7.System Setting Press MENU key to display Main Menu, then press CH+ or CH- key to move the cursor to select System Setting item. Press OK key to access System Setting sub-menu. TV System Setting Under the Main Menu, press CH+ or CH- key to move the cursor to select TV Standard. Press OK key to enter TV Standard menu. TV Output System Setting Display Type Under the TV Standard Menu, press CH+ or CH- key to move the cursor to select correct color system item. Press OK key to confirm, then the system may returns to normal playback. PAL: Europe TV System NTSC: America TV System AUTO: Auto choose correct System Under the System Setting Menu, press CH+ or CH- key to move the cursor to select Display Type item. Press OK key to enter Display Type menu. -24-

28 Display Type Setting Regional Setting Under the Display Type Menu, press CH+ or CH- key to move the cursor to select desired display type. Press OK key to confirm and the system returns to System Setting menu. If the picture gets into distortion after the setting, it means that new Display Type setting is not suitable for the TV or the monitor. Under the System Setting Menu, press CH+ or CH- key to move the cursor to select Regional Setting item. Press OK key to enter. Country Setting OSD Language Under the Regional Setting Menu, press CH+ or CH- key to move the cursor to select Country item. Press VOL+ or VOL- key to select country. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. Under the Regional Setting Menu, press CH+ or CH- key to move the cursor to select OSD Language item. Press VOL+ or VOL- key to move the cursor to select language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. -25-

29 Language Under the System Setting Menu, press CH+ or CH- key to move the cursor to select Language item. Press OK key to confirm. OSD Language The first Audio language setting The second Audio language setting Under the Language Menu, press CH+ or CH- key to move the cursor to select OSD language item. Press VOL+ or VOL- key to select OSD language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. Under the Language Menu, press CH+ or CH- key to move the cursor to select 1st Audio Language item. Press VOL+ or VOL- key to select language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. The audio language depended on the sender of program. If the program does not support multi-language, the TV set can select language automatically. Under the Language Menu, press CH+ or CH- key to move the cursor to select 2nd Audio Language item. Press VOL+ or VOL- key to select language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. -26-

30 The Subtitle language setting Under the Language Menu, press CH+ or CH- key to move the cursor to select Subtitle Language item. Press VOL+ or VOL- key to select language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. The subtitle language depended on the sender of program. If the program does not support selected language, the TV set should display no subtitle language. 6.8.Accessory Setting Under the System Setting Menu, press CH+ or CH- key to move the cursor to select Accessory item. Press VOL+ to enter Accessory menu. Under the Accessory Menu, press CH+ or CH- key to move the cursor to select System Information item. Press OK key to enter next step. System Version Display the Version of TV set. Press EXIT key then the system return to Accessory menu. Press MENU key several times return to normal playback. -27-

31 Set Factory Default Under the Accessory Menu, press CH+ or CH- key to move the cursor to select Factory Default item. Press OK key to enter next step. Enter PIN Input a four-digit PIN number. If the PIN is correct, you can enter the Set Factory Default menu. The default PIN is preset as Set Factory Default Step 1 Select OK item under Warning menu and press OK key to confirm to enter factory default. Notice: The PIN is preset as If you has changed the PIN, then when you want to set factor default, the PIN will not be 8888,but the PIN changed by the user. Please do fix the PIN. Step 2 Data Saving, please wait

32 System update Keep down the function (For the professional to reference) 6.9.Game Menu Game Menu Under Main Menu, press CH+ or CHkey to move the cursor to select Game item. Press OK key to enter Game menu. Game Item Press CH+ or CH- key to move the cursor to select Game item. Press OK key to start game. Mine. Tetris. Gomoku. Calender In Game Status Press EXIT key to return to Game menu. Press EXIT several times till the system saves data and returns to normal playback. Enter game status. -29-

33 In Calender Status Enter Calender status 6.10.DIY Menu Setting You can set up a personal menu in this function. Under Main Menu, Press CH+ or CHkey to move the cursor to select Personal Style item. Press OK key to confirm. Menu Color Setting Press CH+ or CH- key to move the cursor to select Menu Color. Press VOL+ or VOL- to select color. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. Transparent Level Press CH+ or CH- key to move the cursor to select Transparent Level item. Press VOL+ or VOL- to select level data. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. -30-

34 Border Pattern Press CH+ or CH- key to move the cursor to select Border Pattern.. Press VOL+ or VOL- to select Round or right-angle item. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save the setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. Cover Style Press CH+ or CH- key to move the cursor to select Cover Style item. Press VOL+ or VOL- to select cover style. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save the setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. Warning It is necessary to enter PIN number to delete all programs to enter search or start the first time installation while parental control lock is in ON status. But in OFF status, no PIN is required. -31-

35 6.11.Error message Input a wrong PIN In some option setting, it is necessary to enter PIN number. If the image is displayed, it means your PIN is wrong. Please check you PIN and set the option again. The default PIN is preset as No Signal This image displayed means no signal can be received.. Please check if the antenna is connected correctly. Or adjust the direction and angle of antenna may be help. My Favorite List is not exist. If My Favorite List is not exist, while press Favorite PR key to start My Favorite List function, system will display this image. The channel is locked. The channel is locked Mosaic in picture continually This image displayed means the signal received is too weak. The TV set can not output a clear TV picture. Please check if the antenna is connected correctly. Or adjust the direction and angle of antenna may be help. -32-

36 6.12.Analog Quantity Setting in DVB mode Brightness Press MODE key to enter Analog Quantity Setting. Brightness: Press + or - key to adjust. Contrast Press MODE key repeatedly to enter Contrast menu. Press + or - key to adjust contrast. Color Press MODE key repeatedly to enter Color menu. Press + or - key to adjust color. TINT (Only in NTSC system) Press MODE key repeatedly to enter TINT menu. Press + or - key to adjust TINT. VOLUME Press MODE key repeatedly to enter VOLUME menu. Press + or - key to adjust volume. UP/DOWN Press MODE key repeatedly to enter UP/DOWM menu. Press + or - key to adjust UP/DOWN. MIRROR Press MODE key repeatedly to enter MIRROR menu. Press + or - key to adjust MIRROR. -33-

37 RESET Press MODE key repeatedly to enter Reset menu. Press + or - key to reset the Brightness, contrast, color, TINT and Volume to Off-time Setting Off-time setting Press Sleep key to enter the Off-time screen. Press the Sleep key repeatedly to set the time. The maximum is 120 minutes. Notice In case the signal intensity is too weak, the image will appear mosaic like diamonds and sound halts, which is not TV fault. If the image remains mosaic when using telescopic antenna, please try to use the external antenna or CATV. -34-

38 7. ATV Menu Operation Press MENU to display options as follows: PICTURE PRESET SYSTEM MAIN MENU PICTURE SYSTEM PRESET 7.1. Picture Press CH+ or CH- to select Picture item. Press VOL+, Bright, Contrast, Color and Reset will displays on the screen as illustrated below: PICTURE BRIGHT 50 CONTRAST 50 COLOR 50 RESET Press CH+ or CH- to select the item Bright. Press VOL+ to adjust the analog quantity of Bright. Press CH+ or CH- in turn to select Contrast, Color,to adjust the analog quantity of Contrast and Color. Press CH+ or CH- to select the item Reset. Press VOL+ to reset the quantity of Bright,Contrast, Color to

39 7.2. System Press CH+ or CH- to select System item, press VOL+ then (language), Time, (picture mode), (overturn) and Blue back will display on the screen as illustrated below: Press CH+ or CH- to select item Press VOL + to realize the selection of German, French, Dutch, English, Spanish, Portuguese, Italian OSD menu language. Press CH+ or CH- to select Time item. Press VOL + to realize Off-time within 120 minutes

40 Press CH+ or CH- to select item. Press VOL + to shift the screen mode betweem 16:9 and 4:3. Press CH+ or CH- to select item. Press VOL + to make the screen overturn. Press CH+ or CH- to select Blue back item. Press VOL + to realize the ON/OFF of Blue Back under no signal. -37-

41 7.3.Preset Press CH+ or CH- to select Preset item, and Position, Remember, Auto search, Swap, Fine, Manul search, Sound system and Color System will display as illustrated below: Press CH+ or CH- to select Remember item Press VOL- or VOL+ to choose ON under the item Remember, and then it will display this channel upon changing program. In Off status, it will not display the Channel Number. Notice 1.Auto Search Start from Program No When the signal is received under Manul Search, the indication frequency will stop, which means the optimum position for signal storage. If the signal is too weak, the system will automatically identify it as no signal. -38-

42 Press CH+ or CH- to select Auto search item Press VOL- or VOL+ to start Auto Search, and it will put into automatic memory and storage upon completion of A uto Search. And then return to Program No. 0 upon completion Press CH+ or CH- to select Sound system item Then press VOL+, the Sound System will display in the order of I, DK BG, L and M.(Only when displaying the preset of NTSC system, it will show the character of TINT in the Preset menu.) Notice 1. Notes on Sound System: 6.0M means I, 6.5M stands for DK(L), 5.5M is BG and 4.5M is M, please set the Sound System at local one. 2. Color system (all color system are auto setup) A. While sound system is I, color system is PAL-I B. While sound system is DK, color system is PAL-DK or SECAM-DK C. While sound system is BG, color system is PAL-BG or SECAM-BG D. While sound system is L, color system is SECAM-L. E. While sound system is M,color system is NTSC. 3. In case with picture while without sound or with noise, please check the Sound System for correct setup first. -39-

43 Notice While the input signal is not enough strong,please adjust "FINE" item,it can make the picture and sound better. 8. In order to receive a clearer picture Adjust the length, angle and direction of the telescopic antenna to obtain optimum image. Draw back the antenna from the butt end after using it. Notice The ATV Menu Operation Part only for Analogue TV! Caution In case the signal intensity is too weak, the image will remain inferior whatever you adjust the antenna, and cause loud noise wave, shaking image and inferior sound, etc., which is not TV fault. If the image remains inferior when using telescopic antenna, please try to use the external antenna or CATV. -40-

44 10. Before you request for repair Phenomena below does not necessarily mean the failure with the TV set. Please check the following before you request for repair. Phenomena No picture, no sound No image No sound Diamonds in picture No signal Possible Causes Improper connection with AC adapter or Car adapter. Use of unauthorized power supply. Power Switch is on OFF position. The antenna is not adjusted correctly; The Channel or Country is not selected. If so, reset it. The sound is turned to minimum. The earphone is not plugged in. ERASE functions are under too weak signal. Sound system is not correctly set in ATV mode. The antenna is not adjusted correctly; The signal at the receiving place is too weak The correct Country is not selected; Maybe the signal is too weak. Dark picture Diamonds in picture or inferior sound during driving. Adjust Brightness, Contrast correctly The signal is too weak at that place -41-

45 11. Technical Parameters Tune: Input code rate: 4.98~ 31.67Mbit/s Demodulation: COFDM Modulate: QPSK. 16-QAM, 64-QAM FFT Mode: 2K/8K ATV Receiving Channel: DK/I 49.75MHz~847.25MHz BG 48.25MHz~847.25MHz Sound System: DK I BG L M Input: Input Frequency: VHF 177.5MHz~226.5MHz UHF 474MHz~858MHz Video Output: Output Resistance : 75 ohm, Need AV conversion cord. Output Voltage: 1.020mVp-p Audio Output: Output Resistance: 680 ohm General Technical Parameters Display Device: Color TFT-LCD Screen Size: 7 inches Power Supply: DC9V 18W Connecting Terminal: External antenna input jack, stereo earphone jack, Audio / Video (AV) input jack, DVB-T AV output jack, External power supply input jack Applicable Power Supply: Two options: 1.AC Power supply-ac adapter 2.Automobile storage battery(9v) Car adapter Application Temperature: 5~35 Storage Temperature: -40~60 Outer Dimension: MM Weight: about 575g -42-

46 Warning This operation instruction is only intended for reference. No further notice is available to any modification of all information contained therein. Due to continuing improvements, the features and design are subject to change without notice. Warning No repairable components exist in the machine. Do not try to dismantle and improve the TV set, and the high voltage in the machine may cause danger. Maintenance and adjustment of the TV set is subject to professionals. after some items in this manual means it is available with this function. -43-

47

48