USER MANUAL

Size: px

Start display at page:

Download "USER MANUAL"

Homer Baldwin
5 years ago
Views:

1 USER MANUAL

6 R emote C ontrol F unc tions Most of your television s functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Name POWER( ) WIDE(16:9) Red key SUBTITLE (Green key) FAV(Yellow key) EPG(Blue key) HOLD ( ) LIST ( ) LANGUAGE ( ) RADIO ( ) REVEAL ( ) TTX ( ) INDEX ( ) ZOOM ( ) INFO REC L/R F1 SMART S SMART P Cursor key (,,, ) OK SOURCE MENU VOL+/VOL- Exit ( ) MUTE( ) CH+/CH- Numerical (0~9) Return ( ) Channel list( ) Function Description Switch the receiver in and out of standby mode. Switch picture ratio. Muti-function red key. Teletext green key or display subtitle message, when current channel has subtitle option. Teletext yellow key or FAV key, to set or display your favorite programs. Teletext blue key, or to show the Electronic Program Guide of current channel during no-menu state. For teletext operation or USB operation. In DTV mode, press ''INDE X'' key to display a list of recorded programs. In DTV mode, the USB port connected to memory, press ''ZO O M'' key to delay broadcast of television programs currently playing. Display the information of current program. Record programme. Select NICAM mode(under ATV signal source) Picture freeze on or off. Smart sound mode selection. Smart image mode selection. Move cursor up/down/left/right in menu item or change date of EPG. To confirm current setting. Press this key to display signal source selection menu. Press this key to display menu. Press to adjust the volume. Exit the current operation. Switch off sound when viewing a program. Channel changing keys. To change different pages of current channel EPG. Input number. Press this key to return to last watching channel. Look through channel list Note: Appearance of the remote control may be different from this picture, please according to practicality.

8 Input Source DTV Connect the power cord, press power button to power on the television, then press the " SOURCE " button to select TV channel mode to watch television programs. ATV AV YPBPR HDMI1 HDMI2 VGA USB OK: Enter Select Channels Via Program No.

9 MUTE

10 Please select an OSD Language English Vietnamese Thai : Exit MENU: Return Tune Type DTV + ATV Iraq Thailand Macedonia Pakistan Uzbekistan Kosovo Singapore Dubai Myanmar : Exit MENU: Return

11 Channel Menu Channel 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "CHANNEL" menu. 2. Press " / " button to select item, then press "OK" button to confirm operation. 3. Press "MENU" button to return to upper menu or exit menu page. CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information Software Update(OAD) OAD Tuning OK: Enter MENU: Return : Exit Auto Tuning 1. Press " / " button to select Auto Tuning, then press "OK" button to enter submenu. 2. Press " / " button to select DVB Type, then press "OK" button to enter submenu. 3. Press "t/u" button to select Tune Type, then press " to select country. 4. Press "OK" button to start auto searching channel. 5. Press "MENU" button to exit. Tune Type DTV + ATV Iraq Thailand Macedonia Pakistan Uzbekistan Kosovo Singapore Dubai Myanmar : Exit MENU: Return ATV Manual Tuning Press " / " button to select ATV Manual Tuning, then press "OK" button to enter submenu. ATV Manual Tuning Storage To 1 DK Current CH 1 Search Fine-Tune Frequency MHz Save : Exit MENU: Return Storage to 200 Current storage space shows. DK Press "t/u" button to select the system mode DK, BG, I, L. Current CH 1 Press "t/u" button to select the current channel. Search Press "t/u" button to search channel, and press opposite button to stop searching. Fine-Tune Press "t/u" button to fine tuning when the signal of the current channel is weak.

12 Channel Menu Channel DTV Manual Tuning Press " / " button to select DTV Manual Tuning, then press "OK" button to enter DTV manual tuning search. Note: Please select channel then press "OK" button to search. DTV Manual Tuning UHF CH 56 Press OK to search Bad Normal Good Programme Edit Press '' / '' button to select Channel List. Press ''OK'' button to enter into submenu, then press '' / '' button to select the channel you'd like to edit. Delete: When you select a channel, press ''Red'' button to delete it. Move: After selecting channel press ''Green'' button, press " / " button to select the channel position that you'd like to move, then press "OK" button to confirm. You can press "MENU" button to return last menu. Favourite: After choosing channel press ''Yellow'' button, Favourite icon appears behind the channel which you select, press ''Yellow'' button again to cancel it. Press ''MENU'' button to return main menu. 1 Moving Picture 2 Monoscope 3 Color Bar 4 DC i 5 DC04 480p 6 DC04 576i 7 DC04 576p 8 DC04 480i 9 YLE TV1 10 YLE TV2 Programme Edit ATV ATV ATV ATV ATV ATV ATV ATV Delete Move Favourite Skip Skip: After selecting channel press ''Blue'' button, SKIP icon OK: Enter appears behind the channel which you select, press ''Blue'' button again to cancel it. Press ''MENU'' button to return main menu. : Exit MENU: Return Signal Information Press '' / '' button to select Signal Information. Press ''OK'' button to enter into Signal Information menu. You can look through signal information. Note: This function only works with DTV input signal. Software Update(OAD) Press '' / '' button to select Software Update(OAD),and press ''OK'' button to turn on software update(oad). OAD Tuning Press '' / '' button to select OAD Tuning, and press ''OK'' button to search

13 Picture Menu Picture 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "PICTURE" menu. 2. Press " / " button to select item, then press "OK" button to enter submenu. 3. Press "t/u" button to adjust the value of selected item. 4. Press "MENU" button to return to upper menu or exit menu page. PICTURE Picture Mode Dynamic Color Temperature Cool Aspect Ratio 16:9 Noise Reduction Middle Shop Mode Off PC Setting OK: Enter MENU: Return : Exit Picture Mode Press " / " button to select "Picture Mode" item, and then press ''OK'' button to enter into submenu. Press "t/u" button to select picture mode: Standard, Soft, User, Dynamic. Note: The Contrast, Brightness, Saturation and Sharpness only can be adjusted in User mode. Contrast Press " / " button to select the "Contrast" item, and then press "t/u" button to adjust the contrast. Brightness Press " / " button to select the "Brightness" item, and then press "t/u" button to adjust the brightness. Saturation Press " / " button to select the "Saturation" item, and then press "t/u" button to adjust the saturation. Sharpness Press " / " button to select the "Sharpness" item, and then press "t/u" button to adjust the Sharpness. Tint Press " / " button to select the "Tint" item, and then press "t/u" button to adjust the Tint. Note: This function only works with NTSC input signal. Color Temperature Press " / " button to select "Color Temperature" item, and then press "OK" button to enter into submenu. Press "t/u" button to select color temperature: Cool, Standard, Warm. Aspect Ratio Press " / " button to select the "Aspect Ratio" item, and then press "OK" button to enter submenu. Press "t/u" button to select the screen ratio. Noise Reduction Press " / " button to select the "Noise Reduction" item, and then press "OK" button to enter submenu. Press "t/u" button to select noise reduction: Off, Low, Middle, High, Default. Shop Mode Press " / " button to select the "Shop Mode" item, and then press "OK" button to turn on or off shop mode. PC Setting Used for VGA modes display settings. 11

14 Sound Menu Sound 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "SOUND" menu. 2. Press " / " button to select item, then press "OK" button to enter submenu. 3. Press " / /t/u" button to adjust the value of selected item. 4. Press "MENU" button to return to upper menu or exit menu page. Sound Mode Standard Surround Sound Off AD Switch Off SOUND OK: Enter MENU: Return : Exit Sound Mode Press " / " button to select Sound Mode" item, and then press ''OK'' button to enter into submenu. Press "t/u" button to select sound mode: Standard, Music, Movie, User. Treble Press " / " button to select "Treble" item, and then press "t/u" button to enter submenu to adjust the treble. Bass Press " / " button to select "Bass" item, and then press "t/u" button to enter submenu to adjust the bass. Balance Press " / " button to select the "Balance" item, and then press "t/u" button to enter submenu to adjust the balance. Surround Sound Press " / " button to select "Surround Sound" item, and then press ''OK'' key to enter submenu. Press " / " button to select the Off, Surround, SRS TruSurround XT. AD Switch Press " / " button to select "AD Switch" item, and then press ''OK'' key to enter submenu. Press " / /t/u" button to adjust the value of selected item. 12

15 Option Menu Option 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "OPTION" menu. 2. Press " / " button to select item, then press "OK" button to enter submenu. 3. Press " / /t/u" button to adjust the selected item. 4. Press "MENU" button to return to upper menu or exit menu page. OPTION OSD Language English Audio Language English Hearing Impaired Off PVR File System Restore User Default Blue Screen On Software Update(USB) OK: Enter MENU: Return : Exit OSD Language Press " / " button to select "OSD Language" item, and then press ''OK'' button to enter into submenu. Press / /t/u" button to select desired language. Audio Language Press " / " button to select "Audio Language" item, and then press ''OK'' button to enter into submenu. Press / /t/u" button to select desired language. Hearing Impaired Press " / " button to select "Hearing Impaired" item, and then press ''OK'' button to open services might be provided specifically for viewers with impaired hearing. PVR File System Press " / " button to select "PVR File System" item, and then press ''OK'' button to enter into submenu. Choosing storage disk in "select disk" submenu, Press " / " key to select "Check PVR File System", then the machine start check by pressing "OK" key. After checking successful, press "MENU" key to exit menu operation. Press "REC" key to record. Setup the PVR File system before you start recording. Select Disk: Select the device for the Record files. Check PVR File System USB Disk: Display the USB state. Format. Time Shift Size: Display the size of the USB device. (The device has been formated). Speed: Display the speed of the USB device. (The device has been formated). Free Record Limit: Display the free record limit of USB device. (The device has been formated). 1) Select Disk As follows, default as C. Choose the disc to store whatever content need record. NOTE: please format your hard disk before use the PVR function for the first time. 2) Check PVR File System 13

16 Option Menu Check storage PVR file system has been selected. Press ''OK'' button to inspect the USB files and speed on the screen. When there is no USB, or it fails when checking, the screen will display as FAIL. 3) Format When inserting a new USB, enter Format menu. When inserting a USB storage device and there is an abnormality with no partition, it will display No Partition Found. If the information and files are normal, it will display SUCCESS. During format, press ''OK'' button to start checking PVR File system, after confirmation of the files on the USB device, the screen will display the Format disc menu as shown on the left. After Formatting, the system would establish PVR file system according to previous confirmed PVR File System Size. 4) Time Shift Size Format the USB device with PVR File System Type turned to High Speed F.. and when Creating PVR file system is finished, it will display the Time Shift Size setting menu. You can set the space size fortime shift as shown on the left. Restore User Default Press " / " button to select "Restore User Default" item, and then press ''OK'' button to restore factory default settings. Blue Screen Press " / " button to select "Blue Screen" item. Press "OK" key to turn on/off blue screen function. Software Update(USB) Update software by U disk. 14

17 Time Menu Time 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "TIME" menu. 2. Press " / " button to select item, then press "OK" button to enter submenu. 3. Press " / /t/u" button to adjust the selected item. 4. Press "MENU" button to return to upper menu or exit menu page. TIME Clock Off Time Off On Time Off 07/ Feb 22: 44 Sleep Timer Off Time Zone Baghdad +3 OK: Enter MENU: Return : Exit Clock Press " / " button to select "Clock" item, and then press ''OK'' button to enter into submenu. Press / " button to select Date, Month, Year, Hour or Minute, and press " / " button to set the time. Off Time Press " / " button to select Off Time" item, and then press ''OK'' button to enter into submenu. Press / " button to select Off Time, Hour or Minute, and press " / " button to set the time. On Time Press " / " button to select On Time" item, and then press ''OK'' button to enter into submenu. Press / " button to select On Time, Hour, Minute, Source, Channel, Volume, and press " / button to adjust the item. Sleep Timer Press " / " button to select Sleep Timer" item, and then press ''OK'' button to enter into submenu. Press / " button to select sleep time. Time Zone Press " / " button to select Time Zone" item, and then press ''OK'' button to enter into submenu. Press / / / " button to select the time zone mode. 15

18 Lock Menu Lock 1. Press "MENU" button to enter the OSD menu, then press t/u" button to select the "LOCK" menu. 2. Press " / " button to select item, then press "OK" button to enter submenu. 3. Press " / /t/u" button to adjust the selected item. 4. Press "MENU" button to return to upper menu or exit menu page. Lock System Off Set Password Block Program LOCK OK: Enter MENU: Return : Exit Lock System Press " / " button to select "Lock System" item, and then press ''OK'' button to turn on/off lock system. (Password is 0000) Set Password Press " / " button to select "Set Password" item, and then press ''OK'' button to enter into submenu. Block Program Press " / " button to select "Block Program" item, and then press ''OK'' button to enter into submenu. Select the program you want to "Lock", then press ''Green'' button.

19 Media Menu Media player Below shortcut keys will be only available in USB mode. User Interface Note: Before operating USB menu, Plug in USB device, then press "SOURCE" button to set the Input Source to USB. USB 2.0 PHOTO MUSIC MOVE TEXT PHOTO MENU 1. Press " / " button to select PHOTO in the main menu, then press "OK" button to enter. 2. Press "Return" button to return back to the previous menu. 3. Press " / " button to select drive disk you want to watch, then press "OK" button to enter. 4. Press " / " button to select return option to back to the previous menu. 5. Press " / /t/u" button to select the file you want to watch In the file selecting menu, then press "OK" button to doose picture. When highlight the option you select, the file information will appear on the right and picture will be previewed in the center. Basic Function The user can play photo files via the photo player. While the photo is playing, you can operate through the remote control as below: Press " " button to pause or play the photo. Press " " button to stop playing the photo. Press " / " button to skip to previous/next photo. Press "OK" button to show the following operation key. Press " / " button to select the preferred operation key. Repeat All: Press " / " button to select Repeat..option, press "OK" button to select Repeat none/all/1. Music: Press " / " button to select Music, press "OK" button to play background music. Playlist: Press " / " button to select Playlist, press "OK" button to enter. Info.: Press " / " button to select Info.press "OK" button to enter. You can see the detail information of picture. Rotate: Press " / " button to select Rotate. You may choose direction revolving or reversed direction revolving. Zoom in/zoom Out: You can choose to enlarge or reduce the picture. Move View: If the picture big enough to surpasses the screen, you may use this function to move the picture.

Media Menu MUSIC MENU 1. Press " / " button to select MUSIC in the main menu, then press " OK " button to enter. 2. Press "Return" button to return back to the previous menu. 3.

20 Media Menu MUSIC MENU 1. Press " / " button to select MUSIC in the main menu, then press " OK " button to enter. 2. Press "Return" button to return back to the previous menu. 3. Press " / " button to select drive disk you want to watch, then press "OK" button to enter. 4. Press " / " button to select return option to back to the previous menu. When highlighting the option you select, the file information will appear on the right and music prelistening will be on. Press " / /t/u" button to select the file you want to play in the file selecting menu, then press "OK" button to start playback. While the music is playing, you can operate as below: Press "Vol+/-" to control volume. While the music is playing, you can operate through the remote control as below: Press " " button to pause or play the music. Press " " button to stop playing the music. Press " / " button to play the file fast reverse/fast forward. Press " / " button to skip to previous/next music file. NOTE: The most of the Music function are the same as the PHOTO. MUTE: To switch sound off temporarily. GOTO TIME: Press to select the time location of media file. Press " / " button to move the cursor and press number buttons on remote control to input. Then press "OK" button to go to the selected position. MOVIE MENU NOTE: The most of the Movie function are the same as the PHOTO, MUSIC. SET A: Choose this function, you can repeat the play in the time of A to B. SLOW FORWARD: To set to play forward slowly. STEP FORWARD: To set to play forward step by step. ASPECT RATIO: To set the aspect ratio of displaying movie. TEXT MENU Press " / " button to select "TEXT" in the main menu, then press "OK" button to enter. Press "Return" button to return back to the previous menu. NOTE: The most of the TEXT function are the same as the PHOTO. Prev. Page: To display the previous page of current text file. Next Page: To display the next page of current text file.

SAFETY INFORMATION...3

Contents SAFETY INFORMATION...3 Headphone Warning...4 Where to install...4 LED Screen...4 Unit and Accessories...5 Unit and Started...5 Front view...5 Remote Control...6 Remote control instructions...6