User's Guide: Scan Functions

Transcription

1 User's Guide: Scan Functions

2 Table of contents 1 Scan Function 1.1 Available operations in scan function How to scan Sending (basic operation flow) Specifying a destination Directly entering data Selecting a destination from the registered addresses Selecting a destination from Favorites Selecting a destination from Address Book Selecting a destination from Group Selecting a destination from the Program Selecting a destination from Address Book List Searching for an address from the LDAP server Canceling the specified destination Scan option settings Basic option settings such as file type and original size Specifying the file type to save the scanned original data ([IMAGE FORMAT]) Specifying the size of the original to be scanned ([Original Size]) Specifying pages to save original data ([SCAN SETTING]) Selecting the color mode to scan the original ([Start key]) Adjusting quality/density Selecting the appropriate image quality level for the contents of the original ([Original Type]) Specifying the resolution to scan the original ([RESOLUTION]) Adjusting the density of the original to be scanned ([DENSITY]) Adjusting the background density of the original to be scanned ([Background Removal]) Sharpening the border between texts ([SHARPNESS]) Specifying the method to use to scan the original Scanning both sides of an original ([SIMPLEX/DUPLEX]) Scanning a number of originals in several batches ([Separate Scan]) Other option settings Changing the sender's address ([From]) Changing the subject of an ([SUBJECT]) Changing the message text of an ([Body]) Notifying where to save original data by ([notify url]) Sending Original Data as an Attachment (Scan to ) 2.1 Scan to function Preparation for Scan to (for administrators) Preparation flow Operations required to use this function Checking a LAN cable for connection Checking the network settings Configuring the Scan to environment Option settings Registering a frequently used destination Using an LDAP server to specify addresses Registering the subject and message text of an to be sent Using SMTP authentication Using POP before SMTP authentication Using an SSL/TLS communication How to send [Scan Functions] Contents-1

3 3 Sending a File to a Shared Folder of a Computer (SMB Send) 3.1 SMB Send function Preparation for SMB Send Preparation flow Computer side: Operations required to use this function When using Windows 7/8/8.1: When using Windows Vista: When using Mac OS X 10.5/10.6/10.7/10.8/10.9: Machine side: Operations required to use this function (for administrators) Checking a LAN cable for connection Checking the network settings Configuring the SMB Send environment Registering destinations Option settings Using the WINS server Using the direct hosting SMB service Using LLMNR Using in the DFS environment How to send Application functions Notifying where to save original data by (URL notification) URL notification Operations required to use this function (for administrators) Operation flow Sending to an FTP Server (FTP Send) 4.1 FTP Send function Preparation for FTP Send (for administrators) Preparation flow Operations required to use this function Checking a LAN cable for connection Checking the network settings Checking the environment to use the FTP TX function Registering destinations Option settings Using the proxy server How to send Application functions Notifying where to save original data by (URL notification) URL notification Operations required to use this function (for administrators) Operation flow Saving a File on the Hard Disk of This Machine (Save to HDD) 5.1 Save to HDD function How to save Using files saved on the hard disk Downloading the file saved on the hard disk Application functions Notifying where to save original data by (URL notification) URL notification Operations required to use this function (for administrators) Operation flow Saving Data in USB Memory (Save to USB) 6.1 USB memory saving function [Scan Functions] Contents-2

4 6.2 Preparation for saving data to USB memory How to save Sending with Web Service (WS Scan) 7.1 WS Scan function Preparation for WS Scan Preparation flow Machine side: Operations required to use this function (for administrators) Checking a LAN cable for connection Checking the network settings Configuring the environment to use the WS Scan transmission function Computer side: Operations required to use this function Machine side: Option settings (for administrators) Using SSL communication How to send Importing data from a computer Importing Images by TWAIN/WIA Scan 8.1 TWAIN/WIA scan function Preparation for TWAIN/WIA scanning Machine side: Operations required to use this function (for administrators) Checking a LAN cable for connection Checking the network settings Computer side: Operations required to use this function Operating environment of computer Installing the scanner driver (Windows) Installing the scanner driver (Mac OS) Configuring Network Utility Settings TWAIN scanning WIA scanning Uninstalling the scanner driver In Windows: In Mac OS: Registering Frequently Used Destinations (Address Book) Address Book Registering addresses Index [Scan Functions] Contents-3

5 1 Scan Function

6 1.1 Available operations in scan function 1 1 Scan Function 1.1 Available operations in scan function The original data scanned by this machine can be sent to a computer or server, or saved on the hard disk of the machine. It may be necessary to make the following settings prior to using the scan function. For details, refer to the explanations of each function. The scan function provides the following sub-functions. Function Scan to SMB Send FTP TX Save to HDD Save to USB Memory WS Scan TWAIN/WIA Scan Description Sends a converted file to any address as an attachment. Sends a converted file to a shared folder of a computer. To use this function, specify your computer or file server as a destination. Sends a converted file to the FTP server. This function is useful when transferring a file through the FTP server. Saves the original data scanned by this machine on the built-in hard disk. The original data saved on the hard disk can be downloaded via the Web browser on your computer. Note This function is available when an optional Hard Disk is installed. Saves the original data scanned by this machine in the USB memory device connected to the machine. Imports original data by issuing a scan instruction from a computer without configuring complicated system settings, or sends original data scanned by this machine to a computer. This function is supported by Windows of Vista or later. Converts the original data scanned by this machine into a file, and imports it from a computer on the network using TWAIN/WIA-compatible applications. [Scan Functions] 1-2

7 1.2 How to scan How to scan Sending (basic operation flow) 1 Load the original. 2 Press the Scan key. 3 Specify the destination. % For details on how to specify a destination, refer to page 1-6. [Scan Functions] 1-3

8 1.2 How to scan 1 4 Specify scan transmission options. % On the main screen (Scan mode), press the + or, key to select the setting you want to change. For details on scan settings, refer to the respective columns of the following table No. Settings Purpose 1 [IMAGE FOR- MAT] Select the file type used for saving the scanned data. For details, refer to page [QUALITY] Adjust the image quality of the original ([Original Type], [RESOLUTION], [DENSITY], [Background Removal], or [SHARPNESS]) to scan the original. For details, refer to page [SCAN TO] Specify Save to HDD, Save to USB Memory, or WS Scan storage destination. 4 [SIMPLEX/DU- PLEX] Select the surface of the original to be scanned. For details, refer to page [Original Size] Select the size of the original to be scanned. Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page [Scan Functions] 1-4

9 1.2 How to scan 1 No. Settings Purpose 6 [Start key] Change the color mode of Start (Color) or Start (B&W). For details, refer to page [Separate Scan] If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can load them in several batches and handle them as one job. For details, refer to page [SCAN SETTING] Select a filing page unit when an original consists of multiple pages. For details, refer to page [From] Change the address of the sender. For details, refer to page [SUBJECT] Change the subject of the . For details, refer to page [Body] Change the message text of the . For details, refer to page [notify url] Send an , which contains a destination specifying where to save original data, to a specified address after SMB Send, FTP Send, or Save to HDD has been ended. For details, refer to page Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. Related setting You can change the default options for scan transmission to suit your environment. To configure settings: [UTILITY] - [User Settings] - [Scan/Fax Settings] - [Def. Scan Settings] [Scan Functions] 1-5

10 1.3 Specifying a destination Specifying a destination dreference For details on Save to HDD, refer to page 5-2. For details on Save to USB Memory, refer to page 6-2. For details on WS Scan, refer to page Directly entering data Enter the destination mail address. 0 SMB or FTP destinations cannot be specified using Direct Input. 1 When the main screen (Scan mode) is displayed, enter the destination address using the Keypad. % For details on how to enter characters, refer to Chapter 7 "Control Panel" in [User's Guide: Introduction]. 2 Press the Select key to confirm the destination. 3 Select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination. Tips To edit the destination that has been directly entered, select the target destination on the main screen (Scan mode), then select [Check/Edit] on the displayed menu Selecting a destination from the registered addresses Selecting a destination from Favorites Select a destination registered on this machine. Selecting [Favorite] displays the destinations registered in Favorites. 0 For details on how to register an address book, refer to page When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key. This displays a list of destinations registered in Favorites. 2 Select the target destination, then press the Select key. 3 Press the Select key to select the destination. 4 If you select an destination, select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination. Selecting a destination from Address Book Select an address book registered on this machine. 0 Up to 250 address books can be registered. 0 For details on how to register an address book, refer to page When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key twice. This displays the screen to enter a one-touch dial number. [Scan Functions] 1-6

11 1.3 Specifying a destination 1 2 Type in the target one-touch dial number (1 to 250) using the Keypad, then press the Select key. This displays the name of the address book you selected. 3 Press the Select key to select the destination. 4 If you select an destination, select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination. Selecting a destination from Group Select a group destination registered on this machine. Multiple one-touch destinations can be grouped and managed as a single group. 0 Up to 20 groups can be registered (up to 50 destinations in each group). 0 A group destination can only be registered using Web Connection. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. 0 In Scan mode, you cannot select a group destination with a fax destination registered. 1 When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key three times. This displays the screen to enter a group dial number. 2 Type in the target group dial number (1 to 20) using the Keypad, then press the Select key. This displays the name of the group you selected. 3 Press the Select key to select the destination. 4 If you select a group that contains only destinations, select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination. Selecting a destination from the Program Select a program registered on this machine. Program is a function used to register a combination of frequently used option settings and destination information as a recall key. 0 You can register up to 50 programs. 0 A program can only be registered using Web Connection. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. 0 In Scan mode, you cannot select a program destination with a fax destination registered. 1 When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key four times. This displays the screen to enter a program registration number. 2 Type in the target program registration number (1 to 50) using the Keypad, then press the Select key. This displays the name of the program you selected. 3 Press the Select key to select the destination. [Scan Functions] 1-7

12 1.3 Specifying a destination Selecting a destination from Address Book List Select the target destination from the list of address books registered on this machine. 0 If no address books are registered, this function is not available. 0 For details on how to register an address book, refer to page When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key five times. 2 Select [List], then press the Select key. This displays a list of address books registered on this machine. % You can narrow down the destinations to be displayed in the list using the search function. To use the search function, select [Search], then press the Select key. Enter the keyword using the Keypad, then press the Select key. If the search keyword is contained in the middle of the entered text, it will not serve as a search keyword. 3 Select the target destination, then press the Select key. 4 Press the Select key to select the destination. 5 If you select an destination, select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination Searching for an address from the LDAP server When you are using the LDAP server or Active Directory of Windows Server, search for an address through the server. 0 The server must be registered in advance. The registration procedure is explained using Web Connection. For details, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. 1 When the main screen (Scan mode) or [Can Use Addr Book] is displayed, press the Addressbook key five times. 2 Select [LDAP Search], then press the Select key. 3 Select a search target from [Name] or [ ], then press the Select key. 4 Enter the keyword using the Keypad, then press the Select key. % If the search keyword is contained in the middle of the entered text, it will not serve as a search keyword. % For details on how to enter characters, refer to Chapter 7 "Control Panel" in [User's Guide: Introduction]. Searching starts. After a while, the search result appears. 5 Select the target destination from the search result, then press the Select key. 6 Press the Select key to select the destination. 7 Select [Finish], then press the Select key. % If you select [Add], you can add destinations. % If you select [Check/Edit], you can view information on the selected destination. [Scan Functions] 1-8

13 1.3 Specifying a destination Canceling the specified destination 1 On the main screen (Scan mode), select a specified destination, then press the Select key. 2 To cancel an destination, select [Check/Edit], then press the Select key. % To cancel an FTP or SMB destination, go to Step 3. 3 Select the desired destination, then press the Select key. 4 Press the Stop/Reset key. 5 Select [YES], then press the Select key. 6 When the cancellation of destination settings is complete, press the Back key. [Scan Functions] 1-9

14 1.4 Scan option settings Scan option settings Basic option settings such as file type and original size Specifying the file type to save the scanned original data ([IMAGE FORMAT]) Select the file type used for saving the scanned data. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [IMAGE FOR- MAT], then press the Select key. 2 Select the file type to save the scanned original data in, then press the Select key. Settings [TIFF] [JPEG] [PDF] [CPDF] [XPS] Description This is one kind of versatile image formats. This type is available for a multipage file that provides multiple pages in one file. A file type to save a file commonly used for a digital camera, which is suitable for saving photos. JPEG does not support the saving of multiple pages into one file. Most operating systems support this file format. Used to save files that are smaller in size than the normal PDF type. We recommend this option when you want to reduce file size to enable sending by E- mail. A file type that is supported in Windows Vista or later. Specifying the size of the original to be scanned ([Original Size]) Select the size of the original to be scanned. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [Original Size], then press the Select key. 2 Select the size of the original to be scanned, then press the Select key. Settings [Standard Size] [Custom Size] Description Select the original size to scan the original in the standard size such as the metric or inch size. Select this option to scan originals in custom size. Enter vertical and horizontal values. Specifying pages to save original data ([SCAN SETTING]) Select a filing page unit when an original consists of multiple pages. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [SCAN SETTING], then press the Select key. 2 Select a filing page unit, then press the Select key. Settings [Page Separation] [Multi Page] Description Select this check box to convert all pages into a single file. Select this check box to split a file for each page when sending a file. If [IMAGE FORMAT] is selected in [JPEG], [Multi Page] is disabled. [Scan Functions] 1-10

15 1.4 Scan option settings 1 Selecting the color mode to scan the original ([Start key]) Change the color mode to be assigned to the Start key. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [Start key], then press the Select key. 2 Select the color mode to be assigned to the Start key, then press the Select key. Settings [Auto Col/GS] [Auto Col/B&W] [Full Col/GS] [Full Col/B&W] Description Change the color mode of the Start key. Start (Color): Select this option to automatically determine Full Color or Gray Scale to fit the original color when scanning the original. Start (B&W): Select this option to scan in gray scale regardless of the original color. Change the color mode of the Start key. Start (Color): Select this option to automatically determine Full Color or Gray Scale to fit the original color when scanning the original. Start (B&W): Select this option to scan the original in black or white without using neutral colors between black and white. Change the color mode of the Start key. Start (Color): Select this option to scan in full color regardless of the original color. Start (B&W): Select this option to scan in gray scale regardless of the original color. Change the color mode of the Start key. Start (Color): Select this option to scan in full color regardless of the original color. Start (B&W): Select this option to scan the original in black or white without using neutral colors between black and white Adjusting quality/density Selecting the appropriate image quality level for the contents of the original ([Original Type]) Select the appropriate setting for the original to scan it at the optimal image quality level. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [QUALITY], then press the Select key. 2 Select [Original Type], then press the Select key. 3 Select the appropriate setting for the original, then press the Select key. Settings [MIX] [TEXT] [PHOTO] Description Scan an original consisting of text and photos at the optimum image quality level. This function sharpens the edges of the text, and reproduces smoother photos. Scan an original containing a large amount of text at the optimum image quality level. This function sharpens the edges of each character, creating easy-to read images. Scan an original consisting of only photos at the optimum image quality level. [Scan Functions] 1-11

16 1.4 Scan option settings 1 Specifying the resolution to scan the original ([RESOLUTION]) Select a resolution at which to scan the original. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [QUALITY], then press the Select key. 2 Select [RESOLUTION], then press the Select key. 3 Select the resolution to scan the original, then press the Select key. % [400 e 400 dpi] and [600 e 600 dpi] are available when an optional Hard Disk is installed on this machine. Tips The finer the scan resolution, the larger the data volume will be, which will result in longer transmission time. When sending the original by , check whether the amount of data is limited. Adjusting the density of the original to be scanned ([DENSITY]) Scan originals by adjusting the density according to the original. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [QUALITY], then press the Select key. 2 Select [DENSITY], then press the Select key. 3 Press the * or ) key to adjust the image density. Adjusting the background density of the original to be scanned ([Background Removal]) Adjust the background density of an original with a colored background such as a newspaper or an original made from recycled paper. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [QUALITY], then press the Select key. 2 Select [Background Removal], then press the Select key. 3 Press the * or ) key to adjust the background density. Sharpening the border between texts ([SHARPNESS]) Sharpen the edges of images to improve legibility. Smoothen the rough contours of images or sharpen blurred images. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [QUALITY], then press the Select key. 2 Select [SHARPNESS], then press the Select key. 3 Press the * or ) key to adjust the degree of edge enhancement for an image. [Scan Functions] 1-12

17 1.4 Scan option settings Specifying the method to use to scan the original Scanning both sides of an original ([SIMPLEX/DUPLEX]) Select the surface of the original to be scanned. 1 On the main screen (Scan mode), press the + or, key to select the current setting of [SIMPLEX/DU- PLEX], then press the Select key. 2 Select the side to scan the original, then press the Select key. Settings [1-sided] [2-sided] Description Scan a single side of original. Scan both sides of the original. 3 If you select [2-sided] in Step 2, select the binding margin of the original, then press the Select key. Settings [Long Edge] [Short Edge] Description Select this option when the binding position is set to the left of the original. Select this option when the binding position is set to the top of the original. Scanning a number of originals in several batches ([Separate Scan]) If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can load them in several batches and handle them as one job. In [Separate Scan], you can switch between the ADF and Original Glass to scan the originals. 0 This function is available when an optional Hard Disk is installed. 1 Load the original. NOTICE Do not load more than 50 sheets at a time into the original tray, and do not load the sheets up to the point where the top of the stack is higher than the, mark. Doing so may cause a paper jam involving the originals, damage the originals, and/or cause an ADF failure. 2 On the main screen (Scan mode), press the + or, key to select [Separate Scan], then press the Select key. 3 Select [ON], then press the Select key. 4 Press the Start key. The original is scanned. 5 Load the next original, then press the Start key. % If necessary, select [Change Settings] to change the option settings according to the new original. 6 Repeat Step 5 until all originals have been scanned. 7 After all originals have been scanned, select [Finish], then press the Select key. [Scan Functions] 1-13

18 1.4 Scan option settings Other option settings Changing the sender's address ([From]) 1 On the main screen (Scan mode), press the + or, key to select [From], then press the Select key. 2 Enter the sender's address (using up to 320 characters) using the Keypad, then press the Select key. % For details on how to enter characters, refer to Chapter 7 "Control Panel" in [User's Guide: Introduction]. % To correct the entered contents, press the Back key. Changing the subject of an ([SUBJECT]) 1 On the main screen (Scan mode), press the + or, key to select [SUBJECT], then press the Select key. 2 Enter the subject (using up to 64 characters) using the Keypad, then press the Select key. % "From (model name of this machine)" is specified by default for the subject of an . % For details on how to enter characters, refer to Chapter 7 "Control Panel" in [User's Guide: Introduction]. % To correct the entered contents, press the Back key. Related setting The default subject of an can be registered or changed using Web Connection. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. Changing the message text of an ([Body]) 1 On the main screen (Scan mode), press the + or, key to select [Body], then press the Select key. 2 Enter the message text (using up to 256 characters) using the Keypad, then press the Select key. % The default message text of an is blank. % For details on how to enter characters, refer to Chapter 7 "Control Panel" in [User's Guide: Introduction]. % To correct the entered contents, press the Back key. Related setting The default message text of an can be registered or changed using Web Connection. For details, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. Notifying where to save original data by ([notify url]) Send an , which contains a destination specifying where to save original data, to a specified address after SMB Send, FTP Send, or Save to HDD has been ended. For details, refer to page [Scan Functions] 1-14

19 2 Sending Original Data as an Attachment (Scan to )

20 2.1 Scan to function 2 2 Sending Original Data as an Attachment (Scan to ) 2.1 Scan to function The Scan to function converts original data scanned by this machine into a file supported by a computer, and sends it to any address as an attachment. Using this function, you can send a file in the same way as when sending an , enabling easy operation and installation. If the LDAP server or Active Directory of Windows Server is used for user management, an address can be searched via the server. [Scan Functions] 2-2

21 2.2 Preparation for Scan to (for administrators) Preparation for Scan to (for administrators) Preparation flow Connecting this machine to the network Checking a LAN cable for connection Checking the network settings % Check that an IP address is assigned to this machine. Preparing the environment Enabling the Scan to function Registering an server (SMTP) Registering an address of this machine % The registered address is used as the "From" address. Configuring the machine to suit your environment Registering frequently used addresses % This will save you from having to enter a destination each time you send data. Using an LDAP server to specify addresses % When the LDAP server or Active Directory is used, you can search for a destination on the server. Registering the subject and message text of an to be sent % Register subjects and fixed message text phrases as the standard; you can select a desired one when sending an . Using SMTP authentication % This machine supports SMTP authentication. If SMTP authentication is installed in your environment, configure its setting. Using POP before SMTP authentication % This machine supports POP before SMTP authentication. If POP before SMTP authentication is installed in your environment, configure its setting. Using an SSL/TLS communication % This machine supports SMTP over SSL and Start TLS. If a communication with an server is encrypted using SSL in your environment, configure its setting. Preparation finished Operations required to use this function Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. Checking the network settings Print out the Configuration Page, then check that an IP address is assigned to this machine. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen. dreference If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chapter 5 "Initial Settings of This Machine" in [Quick Start Guide]. [Scan Functions] 2-3

22 2.2 Preparation for Scan to (for administrators) 2 Configuring the Scan to environment Enable the Scan to function. Also, register the server for transmission and address of this machine. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions] Option settings Registering a frequently used destination Registering a frequently used address to this machine as a destination will save you from having to enter it each time you send an . For details on how to register it, refer to page 9-2. Using an LDAP server to specify addresses When the LDAP server or Active Directory is used for user management, an address can be searched or specified via the server. To use the LDAP server to specify a destination, you must register the server on this machine. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. dreference For details on how to search using the LDAP server, refer to page 1-8. Registering the subject and message text of an to be sent The subject and message text of an can be registered using Web Connection. For details on the registration procedure, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. Using SMTP authentication This machine supports SMTP authentication. If SMTP authentication is installed in your environment, configure its setting. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Using POP before SMTP authentication This machine supports POP before SMTP authentication. If POP before SMTP authentication is installed in your environment, configure its setting. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Using an SSL/TLS communication This machine supports SMTP over SSL and Start TLS. If a communication with an server is encrypted using SSL in your environment, configure its setting. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 2-4

23 2.3 How to send How to send 1 Load the original. 2 Press the Scan key. 3 Specify the destination address. % For details on how to specify a destination, refer to page Specify scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page % For details on configuring option settings, refer to the respective columns of the following table. Purpose Reference To configure basic options such as file type and original size page 1-10 To adjust the image quality or density depending on the contents of the original page 1-11 To specify the method to scan the original page 1-13 To specify the subject or message text of an page Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 2-5

24 3 Sending a File to a Shared Folder of a Computer (SMB Send)

25 3.1 SMB Send function 3 3 Sending a File to a Shared Folder of a Computer (SMB Send) 3.1 SMB Send function This function converts original data scanned by this machine into a file supported by a computer, and sends it to a shared folder of a computer or server. It also sends a file to your computer as well as to a file server that is usually used to transfer files, which enables sharing of the file between computers. [Scan Functions] 3-2

26 3.2 Preparation for SMB Send Preparation for SMB Send Preparation flow Preparing a destination computer Checking the computer and user names % Check the destination computer name and available user name. Creating a shared folder % Create a destination folder, and start sharing. Connecting this machine to the network Checking a LAN cable for connection Checking the network settings % Check that an IP address is assigned to this machine. Preparing the environment required to use the SMB Send function Enabling the SMB Send function % You can use this function with the default settings unless otherwise requested. Registering a sending destination % A destination must be registered in advance. Configuring the machine to suit your environment Using the WINS server % If WINS (Windows Internet Name Service) is used to communicate with a device on the network, register the WINS server. Using the direct hosting SMB service % When using the direct hosting SMB service to communicate with a device on the network, enable the direct hosting SMB service. (You can use this function with the default settings unless otherwise requested.) Using LLMNR % When using LLMNR (Link-local Multicast Name Resolution) to communicate with a device on the network, enable LLMNR. (You can use this function with the default settings unless otherwise requested.) Using DFS % If DFS (Distributed File System) is installed in your environment, configure its setting. (You can use this function with the default settings unless otherwise requested.) Preparation finished [Scan Functions] 3-3

27 3.2 Preparation for SMB Send Computer side: Operations required to use this function When using Windows 7/8/8.1: Carry out preparations to send original data scanned by this machine to your computer. First, check the name of your computer and that of the login user. 0 Administrator privileges are required to perform this task. 1 From the Start menu, click [Computer] - [System Properties]. % In Windows 8.1, click [ ] in the Start window, then click [PC]. From the toolbar, click [Computer] - [System Properties]. % In Windows 8, right-click the Start window, then click [All apps] - [Computer]. From the toolbar, click [Computer] - [System Properties]. 2 Check [Computer name]. % The computer name is required to specify a destination. Write down the computer name. % For domain user, the domain name is required to specify a destination along with the user name. Write down the domain name. Then, close the window. 3 From the Start menu, click [All Programs] - [Accessories] - [Command Prompt]. % In Windows 8.1, click [ ] in the Start window, then click [Command Prompt]. From the toolbar, click [Computer] - [System Properties]. % In Windows 8, right-click the Start window, then click [All apps] - [Command Prompt]. [Scan Functions] 3-4

28 3.2 Preparation for SMB Send 3 4 Check the name of the user who logs in to the computer. % The user name is required to configure folder sharing settings and specify destinations. Write down the user name. % For domain users, type in "set user", and check the user name. Then, close the window. Next, create a folder where to send the scanned original data, and start sharing. 5 From the Start menu, click [Control Panel] - [Network and Internet] - [Network and Sharing Center] - [Change advanced sharing settings]. % In Windows 8.1, click [ ] in the Start window, then click [Control Panel] - [Network and Sharing Center] - [Change advanced sharing settings]. % In Windows 8, right-click the Start window, then click [All apps] - [Control Panel] - [Network and Sharing Center] - [Change advanced sharing settings]. 6 In the [Advanced sharing settings] screen, click [Turn on file and printer sharing]. Click [Save Changes], and close the window. 7 Create a new folder in any place, and name it. % The folder name is required to specify a destination. Write down the folder name. % Specify the folder name using alphanumeric characters. 8 Right-click on the folder, then click [Properties]. [Scan Functions] 3-5

29 3.2 Preparation for SMB Send 3 9 Click the [Sharing] tab, and also click [Advanced Sharing...]. 10 Select the [Share this folder] check box, then click [Permissions]. 11 In [Group or user names], click [Everyone]. 12 Select the check box to permit [Change], then click [OK]. 13 Click [OK] or [Close], then close each screen. The settings on the computer are then completed. The computer, user, and folder names you wrote down in this procedure are required to specify a destination. [Scan Functions] 3-6

30 3.2 Preparation for SMB Send 3 When using Windows Vista: Carry out preparations to send original data scanned by this machine to your computer. First, check the name of your computer and that of the login user. 0 Administrator privileges are required to perform this task. 1 From the Start menu, click [Computer] - [System Properties]. 2 Check [Computer name]. % The computer name is required to specify a destination. Write down the computer name. % For domain user, the domain name is required to specify a destination along with the user name. Write down the domain name. Then, close the window. 3 From the Start menu, click [All Programs] - [Accessories] - [Command Prompt]. [Scan Functions] 3-7

31 3.2 Preparation for SMB Send 3 4 Check the name of the user who logs in to the computer. % The user name is required to configure folder sharing settings and specify destinations. Write down the user name. % For domain users, type in "set user", and check the user name. Then, close the window. Next, create a folder where to send the scanned original data, and start sharing. 5 From the Start menu, click [Control Panel] - [Network and Internet] - [Network and Sharing Center]. 6 In [File sharing] of [Sharing and Discovery], click [Turn on file sharing]. Click [Save changes], and close the window. 7 Create a new folder in any place, and name it. % The folder name is required to specify a destination. Write down the folder name. % Specify the folder name using alphanumeric characters. 8 Right-click on the folder, then click [Properties]. 9 Click the [Sharing] tab, and also click [Advanced Sharing...]. % If you see the screen for reconfirming the start of file sharing, click [Continue]. [Scan Functions] 3-8

32 3.2 Preparation for SMB Send 3 10 Select the [Share this folder] check box, then click [Permissions]. 11 In [Group or user names], click [Everyone]. 12 Select the check box to permit [Change], then click [OK]. 13 Click [OK] or [Close], then close each screen. The settings on the computer are then completed. The computer, user, and folder names you wrote down in this procedure are required to specify a destination. When using Mac OS X 10.5/10.6/10.7/10.8/10.9: Carry out preparations to send original data scanned by this machine to your computer. First, create a shared folder that is only to be used to receive scanned original data. Then, check the IP address and user name, and start sharing. The following shows a procedure example for Mac OS X Administrator privileges are required to perform this task. 1 Create a new folder in any place, and name it. % The folder name is required to specify a destination. Write down the folder name. % Specify the folder name using alphanumeric characters. 2 Select [About This Mac] in the Apple menu. The [About This Mac] screen appears. 3 Click [More Info...]. % In Mac OS X 10.7/10.8/10.9, click [More Info...], then click [System Report...]. [Scan Functions] 3-9

33 3.2 Preparation for SMB Send 3 4 Check the IP address and the name of the user who logs in to the computer. % The IP address and user name are required to configure folder sharing settings and specify destinations. Write them both down. Then, close the window. 5 Select [System Preferences...] in the Apple menu. 6 In the [System Preferences...] screen, click [Sharing]. 7 Select the [File Sharing] check box. [Scan Functions] 3-10

34 3.2 Preparation for SMB Send 3 8 Click [Options...], and select the [Share files and folders using SMB (Windows)] check box. Then, select the log-in user name (displayed name) check box. % When the [Authentication] screen appears, enter the password of the login user, then click [OK]. Click [Done], and close the window. 9 Click [+]. On the displayed window, select the created folder, then click [Add]. 10 Check the user name and access rights of the created folder. % Check that the user name you wrote down is displayed and the access rights are set to [Read & Write]. The settings on the computer are then completed. The IP address, user name, and folder name you wrote down in this procedure are required to specify a destination. [Scan Functions] 3-11

35 3.2 Preparation for SMB Send Machine side: Operations required to use this function (for administrators) Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. Checking the network settings Print out the Configuration Page, then check that an IP address is assigned to this machine. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen. dreference If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chapter 5 "Initial Settings of This Machine" in [Quick Start Guide]. Configuring the SMB Send environment Enable the SMB Send function. (You can use this function with the default settings unless otherwise requested.) For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Tips In Mac OS X 10.7/10.8/10.9, the following settings are required. - Setting [Authentication] in [SMB Client Settings] to [NTLM v1/v2] - Enabling the direct hosting SMB service - Synchronizing the date and time, including the time zone, between the machine and your computer Registering destinations The destination computer and server must be registered as destinations on this machine in advance. SMB destinations can only be registered using Web Connection. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions] Option settings Using the WINS server If WINS (Windows Internet Name Service) is used to communicate with a device on the network, register the WINS server. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Using the direct hosting SMB service When using the direct hosting SMB service to communicate with a device on the network, enable the direct hosting SMB service. (You can use this function with the default settings unless otherwise requested.) A communication destination can be specified using the IP address (IPv4 or IPv6) or host name. In the IPv6 environment, be sure to enable this service. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 3-12

36 3.2 Preparation for SMB Send 3 Using LLMNR When using LLMNR (Link-local Multicast Name Resolution) to communicate with a device on the network, enable LLMNR. (You can use this function with the default settings unless otherwise requested.) LLMNR is a protocol to resolve the name of the device on the network in a local network environment with no DNS server. It is available in Windows Vista or later. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Using in the DFS environment If DFS (Distributed File System) is installed in your environment, enable DFS. (You can use this function with the default settings unless otherwise requested.) For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 3-13

37 3.3 How to send How to send 0 The target SMB destination must be registered in advance. SMB destinations can only be registered using Web Connection. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. 1 Load the original. 2 Press the Scan key. 3 Specify the destination computer. % For details on how to specify a destination, refer to page Specify scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page % For details on configuring option settings, refer to the respective columns of the following table. Purpose Reference To configure basic options such as file type and original size page 1-10 To adjust the image quality or density depending on the contents of the original page 1-11 To specify the method to scan the original page Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 3-14

38 3.4 Application functions Application functions Notifying where to save original data by (URL notification) URL notification Send an , which contains a destination where to save original data, to a specified address after scan transmission or HDD saving has been completed. For example, to enable ease of information sharing when using a shared folder or FTP server to transfer a file between project members, specify an address for the mailing list as a destination of a notification E- mail. Tips The Scan to function, which can notify of where original data is saved, is only available for SMB Send, FTP Send, and Save to HDD. Operations required to use this function (for administrators) Prepare the environment. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Operation flow 1 Load the original. 2 Press the Scan key. 3 Specify the destination. 4 On the main screen (Scan mode), press the + or, key to select [notify url], then press the Select key. 5 Select [notify url setting ], then press the Select key. 6 Select [ON], then press the Select key. 7 Select [ ADDRESS], then press the Select key. 8 To specify a destination, directly enter the address to notify of the storage location, or select one from the address book ( destination). % When selecting the target destination from the address book, press the Addressbook key. % The Scan function can notify only one address. If the mailing list is used, it is convenient to register its address as a destination. 9 Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 3-15

39 4 Sending to an FTP Server (FTP Send)

40 4.1 FTP Send function 4 4 Sending to an FTP Server (FTP Send) 4.1 FTP Send function This function converts original data scanned by this machine into a file supported by a computer, and uploads it to the FTP server. This function is useful when usually transferring a file through the FTP server. A file uploaded to the FTP server can be downloaded from a computer. [Scan Functions] 4-2

41 4.2 Preparation for FTP Send (for administrators) Preparation for FTP Send (for administrators) Preparation flow Connecting this machine to the network Checking a LAN cable for connection Checking the network settings % Check that an IP address is assigned to this machine. Preparing the environment required to use the FTP TX function Enabling the FTP TX function % You can use this function with the default settings unless otherwise requested. Registering a sending destination % A destination must be registered in advance. Configuring the machine to suit your environment Using the proxy server % When transferring data via a proxy server in your network environment, configure its setting. Preparation finished Operations required to use this function Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. Checking the network settings Print out the Configuration Page, then check that an IP address is assigned to this machine. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen. dreference If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chapter 5 "Initial Settings of This Machine" in [Quick Start Guide]. Checking the environment to use the FTP TX function Enable the FTP TX function. (You can use this function with the default settings unless otherwise requested.) For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Registering destinations The destination FTP server must be registered on this machine in advance. A FTP destination can only be registered using Web Connection. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 4-3

42 4.2 Preparation for FTP Send (for administrators) Option settings Using the proxy server When transferring data via a proxy server in your network environment, register a proxy server. For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 4-4

43 4.3 How to send How to send 1 Load the original. 2 Press the Scan key. 3 Specify a destination FTP server. % For details on how to specify a destination, refer to page Specify scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page % For details on configuring option settings, refer to the respective columns of the following table. Purpose Reference To configure basic options such as file type and original size page 1-10 To adjust the image quality or density depending on the contents of the original page 1-11 To specify the method to scan the original page Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 4-5

44 4.4 Application functions Application functions Notifying where to save original data by (URL notification) URL notification Send an , which contains a destination where to save original data, to a specified address after scan transmission or HDD saving has been completed. For example, to enable ease of information sharing when using a shared folder or FTP server to transfer a file between project members, specify an address for the mailing list as a destination of a notification E- mail. Tips The Scan to function, which can notify of where original data is saved, is only available for SMB Send, FTP Send, and Save to HDD. Operations required to use this function (for administrators) Prepare the environment. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Operation flow 1 Load the original. 2 Press the Scan key. 3 Specify the destination. 4 On the main screen (Scan mode), press the + or, key to select [notify url], then press the Select key. 5 Select [notify url setting ], then press the Select key. 6 Select [ON], then press the Select key. 7 Select [ ADDRESS], then press the Select key. 8 To specify a destination, directly enter the address to notify of the storage location, or select one from the address book ( address). % When selecting the target destination from the address book, press the Addressbook key. % The Scan function can notify only one address. If the mailing list is used, it is convenient to register its address as a destination. 9 Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 4-6

45 5 Saving a File on the Hard Disk of This Machine (Save to HDD)

46 5.1 Save to HDD function 5 5 Saving a File on the Hard Disk of This Machine (Save to HDD) 5.1 Save to HDD function The Save to HDD function is used to save original data scanned by this machine on the hard disk of this machine. The original data saved on the hard disk can be downloaded via the Web browser on your computer. Tips This function is available when an optional Hard Disk is installed. [Scan Functions] 5-2

47 5.2 How to save How to save 0 Up to 100 files can be saved. 1 Load the original. 2 Press the Scan key. 3 On the main screen (Scan mode), press the + or, key to configure scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page % For details on configuring option settings, refer to the respective columns of the following table. Purpose Reference To configure basic options such as file type and original size page 1-10 To adjust the image quality or density depending on the contents of the original page 1-11 To specify the method to scan the original page On the main screen (Scan mode), press the + or, key to select [SCAN TO], then press the Select key. 5 Select [Scan to HDD], then press the Select key. 6 Select [Save Document], then press the Select key. % If you select [Delete Document], you can delete files on the hard disk. 7 If you are logged in as a registered user while user authentication is enabled, select [Save Folder], then press the Select key. % If user authentication is not enabled or you are logged in as a public user, go to Step 9. 8 If necessary, change the storage location, then press the Select key. % If you are logged in as a registered user while user authentication is enabled, you can select [Personal] (personal area on the hard disk) as a destination for where to save a file. 9 Select [Document Name], then press the Select key. 10 Check the name of the file to be saved, then press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 5-3

48 5.3 Using files saved on the hard disk Using files saved on the hard disk Downloading the file saved on the hard disk Use Web Connection to check, download, or delete files on the hard disk. 1 Access to the Web Connection using the Web browser. % Enter the IP address of this machine in the URL field of the Web browser, then press the Enter key on the keyboard. address of this machine>/ 2 Log in as a public user or registered user. % If you log in to the administrator mode, you can view or delete files of all users. 3 In the [Storage] tab, click [Scan to HDD]. This displays a list of users who are saving files on the hard disk. 4 Click [View] in the column of the user who is saving the file to be downloaded in the HDD. % If you are logging in to the administrator mode, click [Delete]; you can delete all files of the selected user. 5 Click [Copy] in the column of the file to be downloaded. % Clicking a thumbnail or file name displays detailed information of the selected file. % Click [Delete] to delete the selected file. This starts downloading the selected file. dreference For details on how to use Web Connection, refer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions]. Tips The [Storage] tab for Web Connection is available when an optional Hard Disk is installed. [Scan Functions] 5-4

49 5.4 Application functions Application functions Notifying where to save original data by (URL notification) URL notification Send an , which contains a destination where to save original data, to a specified address after scan transmission or HDD saving has been completed. For example, to enable ease of information sharing when using a shared folder or FTP server to transfer a file between project members, specify an address for the mailing list as a destination of a notification E- mail. Tips The Scan to function, which can notify of where original data is saved, is only available for SMB Send, FTP Send, and Save to HDD. Operations required to use this function (for administrators) Prepare the environment. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Operation flow 1 Load the original. 2 Press the Scan key. 3 Specify the destination. 4 On the main screen (Scan mode), press the + or, key to select [notify url], then press the Select key. 5 Select [notify url setting ], then press the Select key. 6 Select [ON], then press the Select key. 7 Select [ ADDRESS], then press the Select key. 8 To specify a destination, directly enter the address to notify of the storage location, or select one from the address book ( address). % When selecting the target destination from the address book, press the Addressbook key. % The Scan function can notify only one address. If the mailing list is used, it is convenient to register its address as a destination. 9 Press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 5-5

50 6 Saving Data in USB Memory (Save to USB)

51 6.1 USB memory saving function 6 6 Saving Data in USB Memory (Save to USB) 6.1 USB memory saving function The USB memory saving function is used to save original data scanned by this machine in the USB memory device connected to this machine. [Scan Functions] 6-2

52 6.2 Preparation for saving data to USB memory Preparation for saving data to USB memory USB memory devices that have the following specifications can be connected to this machine. Item Interface Format type Security Requirement Compatible with USB Version 1.0/2.0 interface Formatted in FAT32 Securities such as data encryption and password lock shall be released, or the security function shall be turned Off. Note the following points when connecting a USB memory device to this machine. - Do not disconnect the USB memory device while saving a file to the USB memory or printing a file in the USB memory. - Use only a USB memory device on this machine. Do not use other USB devices (such as a hard disk unit or USB switching hub). - When this machine is starting up, do not insert or remove the USB memory device to/from the USB port. - Do not disconnect the USB memory device directly after connecting it. Related setting (for the administrator) You can select whether or not to permit saving files in the USB memory. To configure settings: [UTILITY] - [Admin Settings] - [System Settings] - [Folder Settings] - [ExtMemFuncSettings] - [Restrict ScantoUSB] (default: [OFF]). [Scan Functions] 6-3

53 6.3 How to save How to save 1 Connect a USB memory device to the USB port of this machine. 2 Load the original. 3 Press the Scan key. 4 On the main screen (Scan mode), press the + or, key to configure scan transmission options. % Before scanning the original on this machine, specify the size of the original to be scanned. If you fail to set the original size correctly, the image may be cut off. For details on how to specify the original size, refer to page % For details on configuring option settings, refer to the respective columns of the following table. Purpose Reference To configure basic options such as file type and original size page 1-10 To adjust the image quality or density depending on the contents of the original page 1-11 To specify the method to scan the original page On the main screen (Scan mode), press the + or, key to select [SCAN TO], then press the Select key. 6 Select [SCAN TO USB MEMORY], then press the Select key. 7 Check the name of the file to be saved, then press the Start key. % To scan in color, press the Start (Color) key. To scan in black and white, press the Start (B&W) key. % If you press the Stop/Reset key while scanning the original, scan processing stops, and the confirmation screen appears to check whether you wish to cancel the job. To stop sending, cancel the job. Sending starts. [Scan Functions] 6-4

54 7 Sending with Web Service (WS Scan)

55 7.1 WS Scan function 7 7 Sending with Web Service (WS Scan) 7.1 WS Scan function This function imports original data by issuing a scan instruction from a computer without configuring complicated system settings, or sends original data scanned by this machine to a computer. This function is supported in an operating system of Windows Vista or later (Windows Vista/7/8/8.1/Server 2008/Server 2008 R2/Server 2012/Server 2012R2). [Scan Functions] 7-2

56 7.2 Preparation for WS Scan Preparation for WS Scan Preparation flow Connecting this machine to the network Checking a LAN cable for connection Checking the network settings % Check that an IP address is assigned to this machine. Preparing the environment required to use the WS Scan transmission function Enabling the Web service function % Check the Web service settings and scanner name. Preparing the environment required to use a computer Installing the scanner driver % Install a scanner driver used for Web service. Configuring the machine to suit your environment Using SSL communication % If a communication that uses the Web service is encrypted with SSL in your environment, configure its setting. Preparation finished Machine side: Operations required to use this function (for administrators) Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. Checking the network settings Print out the Configuration Page, then check that an IP address is assigned to this machine. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen. dreference If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chapter 5 "Initial Settings of This Machine" in [Quick Start Guide]. Configuring the environment to use the WS Scan transmission function Enable the scan using the Web service. In addition, configure settings used to detect this machine using the Web service, information for this machine as a scanner, and the method to connect to this machine. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. [Scan Functions] 7-3

57 7.2 Preparation for WS Scan Computer side: Operations required to use this function Install a scanner driver required for WS scan transmission in a computer. Then, configure operations to be performed after scan transmission, in the scanner driver. This example shows a procedure for Windows 7. Before installation, from the Start menu, select [Control Panel] - [Network and Internet] - [Network and Sharing Center] - [Change advanced sharing settings], and check that [Network Discovery] is enabled. 1 From the Start menu, click [Computer] - [Network]. This displays the devices connected to the network. 2 Right-click the scanner icon of this machine, and select [Install]. % Depending on the settings on the computer, the UAC (User Account Control) dialog box may appear. Check the details, and proceed to the next step. % If both of the scan and printer functions are enabled in the Web service settings of this machine, this machine is represented by the printer icon. % In Windows 8/8.1/Server 2012/Server 2012 R2, click [Network] - [Add devices and printers] on the toolbar. In the displayed window, select the device name of this machine, then click [Next]. The driver is installed automatically. When the confirmation dialog box appears, click [Close]. 3 From the Start menu, click [Devices and Printers]. 4 Right-click the icon of this machine, then click [Scan properties]. [Scan Functions] 7-4

58 7.2 Preparation for WS Scan 7 5 Click the [Events] tab, and specify the operation (how to save original data) of a destination computer at scan transmission (WS Scan). Settings [Select an event] [Actions] Description Select [Scan]. Select the operation of a destination computer when performing a scan transmission on this machine. [Start this program]: Starts the application for WS Scan that is installed on a computer selected as a WS Scan destination, and displays the scanned original data in the application window. Select the application to be started from the list. [Prompt for which program to run]: Displays a list of applications for WS Scan installed on your computer (destination computer) in the screen of the computer that performed a scan transmission. [Take no action]: Saves original data in the following folder as a file without starting the application. On your computer, select Start - [Documents] - [Scanned Documents]. 6 If necessary, right-click the icon of this machine, then click [Scan profiles] to change the default scan settings. % For details on the scan settings, refer to page On the Control Panel of this machine, select [SCAN TO] - [Scan to DPWS] on the main screen (Scan mode), and check that the target computer is displayed. The settings on the computer are then completed Machine side: Option settings (for administrators) Using SSL communication If a communication that uses the Web service is encrypted with SSL in your environment, configure SSL communication settings. For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's Guide: Applied Functions]. Tips If you are using Windows 8/8.1, a communication that utilizes the Web service cannot be encrypted using SSL. [Scan Functions] 7-5

59 7.3 How to send How to send 1 Load the original. 2 Press the Scan key. 3 On the main screen (Scan mode), press the + or, key to select [SCAN TO], then press the Select key. 4 Select [Scan to DPWS], then press the Select key. The computers on the network, in which this machine is designated as the Web service scanner, appear as the destinations. 5 Select a destination computer, then press the Start key. % When you select a destination computer and press the Select key, the details of the destination are displayed. Sending starts. 6 Use the destination computer to handle the application for importing original data or check files saved by a scan transmission. % When using a scan transmission from this machine, start the application on a destination computer to import original data, or save original data in a specific folder. For details, refer to page 7-4. [Scan Functions] 7-6

60 7.4 Importing data from a computer Importing data from a computer Operate this machine through the application on a destination computer, and import the scanned original data. The imported original data can be edited or saved in a computer. This section explains an example using Windows 7 and [Windows Fax and Scan] application software. 1 From the Start menu, click [All Programs] - [Windows Fax and Scan]. 2 Click [New Scan]. The [New Scan] dialog box appears. 3 Specify the desired items from among the following to fit the original to be scanned. Settings [Scanner] [Profile] Description Displays the scanner name of this machine. To switch other scanner, click [Change...]. Select a profile to fit the original you want to load onto this machine. [Photo]: Select this option to scan an original that consists primarily of photos. [Documents]: Select this option to scan an original that consists primarily of text. [Last used settings]: Select this option to scan an original using the previous settings. [Add profile...]: Select this option to create a new profile other than the options above and add it as an option. Selecting [Add profile...] displays the [Add New Profile] window. [Scan Functions] 7-7

61 7.4 Importing data from a computer 7 Settings [Source] [Paper size] [Color format] [File type] [Resolution (DPI)] [Brightness] [Contrast] Description Select the position to set the original. [Flatbed]: Select this option to load the original on the Original Glass. By selecting [Flatbed], you can use [Preview], which is a scan function. [Feeder]: Select this option to load the original into the ADF. When [Feeder] is selected in [Source], specify the size of the original to be scanned. Select either [Color] or [Gray Scale] as the color mode to scan originals. The original is scanned in the selected color mode regardless of the original color. Select a file type to save a file. [BMP]: Used to save an image file adopted by the "Paint" software supplied with Windows. This type does not support a function that compresses data to be saved, so the file size is larger than JPEG or PNG. [JPG]: Used to save files frequently used with digital cameras, which is available for saving photos. JPEG does not support the saving of multiple pages into one file. [PNG]: Used to save an image file with no quality degradation when compressing a file. Note that some files cannot be displayed in old Web browsers. [TIF]: This is one kind of versatile image formats. This type is available for a multi-page file that provides multiple pages in one file. [XPS]: A file type that is supported in Windows Vista or later. Specify the resolution at which to scan the original. Specify the brightness with which to scan the original. To specify the brightness level, drag the slider, or type in a numerical value. Specify the contrast at which to scan the original. To specify the contrast level, drag the slider, or type in a numerical value. 4 Click [Scan]. % If you select [Flatbed] in [Source], click [Preview] before saving data as a file, and check the image of the scanned original. If necessary, trim a displayed image, or adjust [Brightness], [Contrast], or [Resolution (DPI)]. After checking the scanned original, click [Scan]. The original is scanned, and displayed in the application window of [Windows Fax and Scan]. [Scan Functions] 7-8