RELEASE NOTE ETERNITY PE/GE/ME. DATE: 19 th May VERSION: V12R4 Release 5. AUTHOR: Tapan Upmanyu

Transcription

1 RELEASE NOTE ETERNITY PE/GE/ME DATE: 19 th May 2015 VERSION: V12R4 Release 5 AUTHOR: Tapan Upmanyu

2 Contents Parameters getting default when upgraded to current Version/Revision from Previous Version/Revision.. 3 Upgradation Procedure...3 Bugs Solved New features implemented 5 Compatibility Charts.. 6

3 Parameters getting default when upgraded to current Version/Revision from Previous Version/Revision Below given configurations are going to be defaulted with this firmware upgrade from last field Release. 1. System Activity Log Upgradation Procedure Log in to the system's FTP. Delete all files from 'system' folder. Go to Field folder. Copy all files from "Firmware-Part-1" folder to "system' folder. Reboot the system. After "Firmware-Part-1" up gradation successfully it will show message as given below on web login.

4 Now again Log in to the system's FTP. Delete all files from 'system' folder. Copy all files from "Firmware-Part-2" folder to "system' folder. Reboot the system. Upgrade SMS Server, VoIP Server Card & VMS Card firmware as per compatibility with reference to Master firmware. Bugs Solved Getting Call Progress tone when ETERNITY is used as a Gateway for PRI to GSM. OG call not going from PRI line by Global/Personal Directory. Forward CLI of calling party when routing calls through Voice Mail. Noise Observed after some time during speech in SIP-E&M connectivity. Select Offset drop down menu in Key Template become non editable. Not Able to view the incoming call report for PRI line. SMS Over IP not working with New Line Character.

5 Voice Module file is not getting uploaded after proper format conversion. Prefix Area Code isn't getting prefixed to the received CLI in the case of IC call on SIP trunk. SNTP is not working. New features implemented Update password policy for System Engineer mode, System Administrator Mode and Front Desk User mode: The password must be alphanumeric with one uppercase alphabet, one lower case alphabet, one numeral and one special character. Login restriction from default password: Login and configuration cannot be done using the default passwords of respective modes. Update password policy for SIP Extension: SIP extension password must be of minimum six characters with one uppercase alphabet, one lower case alphabet, one numeral and one special character. By default SA mode is active only in Class of service group 20, when the system is in Hotel mode. FTP access restrictions: FTP access can be restricted to a specific IP or subnet. SIP Extension Security: Trusted and blacklisted IPs can be configured from which a device can send requests to be registered as a SIP extension. Security Setting for ETERNITY [FTP, web, Telnet, Third party Auto Configuration, SIP Extension black list]: Trusted and blacklisted IPs can be configured from which ETERNITY can be accessed. Enhancement of SIP Trunk logic: SIP trunks work with trusted IPs only. During a Peer to Peer call the trunk on which the call will be landed will be hunted on the basis of trusted IP programmed against them.

6 Compatibility Charts Telephony Service Provider (TSP) Sr. No. TSP Version Revision Compatible Master Application Version Revision Remarks V12R02 Release-1 V12R02 Release-2 Base Release of TSP. Only Supported for 32-bit OS V12R02 Release-1 V12R02 Release-2 V12R03 Release-1 V12R03 Release-2 V12R03 Release-3 Support added for 64-bit OS V12R03 Release-4 V12R04 Release-1 V12R04 Release-2 Trunk Identification for extension is added V12R03 Release-4 V12R04 Release-1 V12R04 Release-2 V12R04 Release-3 V12R04 Release-4 V12R04 Release-5 Support added for Outlook & Microsoft TAPI Server. COMMUNICATION MANAGER (ETERNITY ME) FOR ETERNITY ME CARD Communication Manager Master Application V4R1 V4R2 V4R3 V10Rx V11R1 X (Note-1) X (Note-1) V11R2 X (Note-1) X (Note-1) V11R3

7 V11R4 V11R5 V12R1 V12R2 V12R3 V12R4 NOTE: Compatibility Issue of Redundancy supported application (V11R2) and V4R2 Comm. Manager. This is solved in V4R3. For ETERNITY ME CPU Card (Hot Redundancy Supported Card) Communication Manager Master Application V5R1 V5R2 V5R3 V10Rx V11R1 V11R2 X V11R3 X V11R4 X V11R5 X V12R1 X V12R2 X V12R3 X VMS Card (ETERNITY ME/PE/GE/LE) VMS Application (NE/NAVAN) Master Application VMS Card/Application V6R5 V6R6 V6R7 V6R8 V6R9.1.0 V6R9.2.0 V6R9.3.0 V10Rx X X X X V11R1 X X X X V11R2 X X X X V11R3 X X X X V11R4 X X X V11R5 X X X V12R1 X X X V12R2 X X X V12R3 X X X V12R4 X X

8 GSM Card (ETERNITY ME/LE) Hardware Software Remarks (To Upgrade/Downgrade specify string as below in build.txt) Old :: Below PCB: P Old :: V1R1 to V2Rx GSM:GSM_vxrx.mfb New :: PCB: P and Onward New :: V3R1 and Onwards MOB:MOB_vxrx.mfb Note: If you want to Upgrade/Downgrade the GSM card with Version/Revision V3R1 and V3R2 then you must have to specify the string mention in the table above otherwise the card will continuously restart and will not enter in Update mode. T1E1 CARD (ETERNITY ME/LE) Master Application T1E1 Card V4R5 V4R6 V4R7 V4R8 V4R9 V10Rx X X V11R1 X X V11R2 X X V11R3 X X V11R4 X X V11R5 X X V12R1 V12R2 V12R3 V12R4 VoIP CARD Master Application VoIP Card V1R8 V1R9 V1R10 V1R11 V1R12 V1R13 V2R1 V2R2 V2R3 V2R4 V2R5 V10R11.18 X X X X X X X X V10R12.00 X X X X X X X X X V11R1 X X X X X X X X X V11R3 X X X X X X X X V11R4 X X X X X X X V11R5 X X X X X X X X V12R1 X X X X X X X X V12R2 X X X X X X X X V12R3 X X X X X X X X V12R4 X X X X X X X X

9 DATA CARD Compatibility Data Card S/w Ver-Rev below V2R1 is not auto upgradable SMS SERVER Master SMS Server Application V1R1 V1R2 V1R3 V1R4 V1R5 V1R6 V1R7 V11R1 X X X X X X V11R2 X X X X X X V11R3 X X X X X X V11R4 X X X X X V11R5 X X X X X V12R1 X X X X X X V12R2 X X X X X X V12R3 X X X X X X V12R4 X X X X X MATRIX PHONES VP248 IP PHONE Master VP248 IP Phone Application V5R12 V5R13 V5R14 V5R15 V5R16 V11R1 X X X X V11R2 X X X X V11R3 X X X X V11R4 X X X X V12R1 X X X X V12R2 X X X X V12R3 X X X X V12R4 X X X X ANDROID SPARSH M2S CLIENT Master Android SPARSH M2S Client Application V1R1 V1R2 V1R3 V1R4 V11R3 V11R4 V12R1 V12R2

10 V12R3 V12R4 Note: V1R3 version must be used to support RTP Relay and DRTP feature. iphone SPARSH M2S CLIENT Master Application V1R1 V1R2 V1R3 V12R1 V12R2 V12R3 V12R4 iphone SPARSH M2S Client