K2 Dyno. Replay System USO RESTRITO. Quick Start Guide. Software Version 2.0
|
|
- Wilfrid Edwards
- 5 years ago
- Views:
Transcription
1 K2 Dyno Replay System Quick Start Guide Software Version May 2011
2 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: The Quality System of: Thomson Inc, and its wor dwide Grass Valley division affiliates DBA GRASS VALLEY Headquarters 400 Providence Mine Rd Nevada City, CA United States Kapittelweg HG Breda The Nederlands Rue du Clos Courtel CS Cesson-Sevigné Cedex France 40 Rue de Bray 2 Rue des Landelles Cesson Sevigné France Carl-Benz-Strasse Schifferstadt Germany SW Greystone Ct. Beaverton, OR United States 7140 Baymeadows Way Ste 101 Jacksonville, FL United States 1 rue de l Hautil Z.I. des Boutries BP Conflans-Sainte Honorine Cedex France Spinnereistrasse 5 CH-5300 Turgi Switzerland Including its implementation, meets the requirements of the standard: ISO 9001: Presidential Way Suite 300 Woburn, MA United States 2300 So. Decker Lake Blvd. Salt Lake City, UT United States Technopole Brest-Iroise Site de la Pointe du Diable CS Brest Cedex 3 France Brunnenweg 9 D Weiterstadt Germany Scope: The design, manufacture and support of video and audio hardware and software products and related systems. This Certificate is valid until: June 14, 2012 This Certificate is valid as of: June 14, 2009 Certified for the first time: June 14, 2000 H. Pierre Sallé President KEMA-Registered Quality The method of operation for quality certification is defined in the KEMA General Terms And Conditions For Quality And Environmental Management Systems Certifications. Integral publication of this certificate is allowed. KEMA-Registered Quality, Inc County Line Road Chalfont, PA Ph: (215) Fax: (215) CRT Accredited By: ANAB
3 K2 Dyno Replay System Quick Start Guide Software Version May 2011
4 Copyright Disclaimer U.S. Government Restricted Rights Legend Trademarks and Logos Revision Status Copyright Grass Valley USA, LLC. All rights reserved. Printed in the United States of America. Portions of software , Microsoft Corporation. All rights reserved. This document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U.S. copyright law, without the prior written consent of Grass Valley USA, LLC., P.O. Box 59900, Nevada City, California This product may be covered by one or more U.S. and foreign patents. Product options and specifications subject to change without notice. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Grass Valley USA, LLC. Grass Valley USA, LLC. assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS or in subparagraph c(1) and (2) of the Commercial Computer Software Restricted Rights clause at FAR , as applicable. Manufacturer is Grass Valley USA, LLC., P.O. Box 59900, Nevada City, California U.S.A. Grass Valley, STRATUS, K2, Aurora, Summit, ChannelFlex, Dyno, Solo, ClipStore, Infinity, Turbo, Profile, Profile XP, NetCentral, NewsBrowse, NewsEdit, NewsQ, NewsShare, NewsQ Pro, and Media Manager are either registered trademarks or trademarks of Grass Valley USA, LLC. in the United States and/or other countries. Grass Valley USA, LLC. products are covered by U.S. and foreign patents, issued and pending. Additional information regarding Grass Valley USA, LLC. trademarks and other proprietary rights may be found at Other trademarks and logos used in this document are either registered trademarks or trademarks of the manufacturers or vendors of the associated products, such as Microsoft Windows operating system, Windows Media player, Internet Explorer internet browser, and SQL Server. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom. Rev Date Description June 17, 2009 Initial release of the K2 Dyno Replay System Quick Start Guide January 28, 2010 Updates for version April 13, 2010 Updates for version May 16, 2011 Updates for version K2 Dyno Replay System Quick Start Guide 16 May 2011
5 Chapter 1 Installation This section documents the installation of the bundled K2 Summit Production Client and K2 Dyno Replay Controller that you buy as a Dyno-Pack. If you are connecting a K2 Solo Media Server or a K2 Summit Production Client that is not part of a Dyno-Pack and has not been previously controlled by a K2 Dyno Controller, refer to the K2 Dyno Controller Installation Manual. Unpack and check contents Find the following items in the packaging for the K2 Summit Production Client. K2 Summit Production Client NOTE: Do not lose the Recovery Flash Drive that is stored inside the bezel. It contains the image for this specific K2 Summit Production Client. Rack slides rass all roup rass all roup usss usss usss usss usss usss usss usss usss usss usss usss rass all roup rass all roup rass all roup rass all roup rass all roup rass all roup Licenses and Warranties Release Notes Power cords LTC cables Find the following items in the packaging for the K2 Dyno Controller. 1 K2 Dyno Replay Controller Power cord Keyboard Mouse Recovery Flash Drive NOTE: Do not lose the Recovery Flash Drive. It contains the image for this specific K2 Dyno Replay Controller. rass all roup rass all roup usss usss usss usss usss usss usss usss usss usss usss usss rass all roup rass all roup rass all roup rass all roup rass all roup rass all roup Licenses and Warranties Release Notes 1. Optional accessory: AES breakout cables (K2-AES-Breakout) 16 May 2011 K2 Dyno Replay System Quick Start Guide 5
6 Chapter 1 Installation Gather additional items To complete a typical K2 Dyno Replay System, as referenced in this Quick Start Guide, you must provide the following items: Two VGA monitors (1280 x 1024 x 32 or greater) and cables Ethernet cable, either crossover or straight-through Video monitors and cables Audio monitoring system USB keyboard USB mouse System overview The procedures and explanations in this Quick Start Guide assume a typical K2 Dyno Replay System, such as that illustrated in the following diagram. If your installation requires a different system configuration, apply the information in this Quick Start Guide accordingly. SDI in (A) SDI in (B) C1 Record C2 Ethernet connection AppCenter Pro on K2 Summit Production Client K2 Summit Client K2 SUMMIT PRODUCTION CLIENT C3 Play C4 K2 Dyno Replay application VGA output PGM P1 SDI out (C) SDI out (D) PVW P2 Video/audio monitoring K2 Dyno Controller Also refer to Channel operation overview on page 26 and K2 AppCenter Elite ChannelFlex configurations on page K2 Dyno Replay System Quick Start Guide 16 May 2011
7 Cable K2 Summit Client Cable K2 Summit Client If desired, mount the K2 Summit Client in an equipment rack. Refer to the K2 System Guide for rack mount procedures. Make K2 Summit Client cable connections as illustrated. Use C1 as record channel. Connect Power cord Channels (C1, C2, C3, C4) are bi-directional Use C2 as record channel. Connect Keyboard and mouse Each channel can be both an input (record channel) and an output (play channel). For the K2 Dyno Replay System documented in this Quick Start Guide, C1 and C2 are record channels and C3 and C4 are play channels. For complete cabling instructions, refer to the K2 System Guide. If using ChannelFlex Suite features, refer to the K2 Dyno Controller Installation Manual and the K2 AppCenter User Manual. Cable K2 Dyno Controller Ethernet (Control port) VGA monitor Make K2 Dyno Controller cable connections as illustrated. RS-232 Use C3 as play channel. Keyboard and mouse Use C4 as play channel. Power cord AES audio V~ 4A 50-60Hz Power cord VGA monitor Ethernet (Control port) GB1 The Ethernet connection between the K2 Summit Client and the K2 Dyno Controller can be via direct connect cable or via an Ethernet switch. 16 May 2011 K2 Dyno Replay System Quick Start Guide 7
8 Chapter 1 Installation Start up K2 Dyno Controller Open power switch door Press power switch V~ 4A 50-60Hz There is no logon for the K2 Dyno Controller. After you have started the Dyno, proceed to Start up K2 Summit Client and the topics dealing with configuring the K2 Summit before proceeding to Start using the K2 Dyno Controller on page 13. Start up K2 Summit Client RS-232 Press standby switch K2 SUMMIT PRODUCTION CLIENT Log on to the K2 Summit Client with the default Windows administrator account: Username: Administrator Password: admink2 (The password is case sensitive) At first startup, End User License Agreements appear on the K2 Summit Client screen. Accept the agreements to continue. The Power LED goes on and stays on. The Service LED stays off. Startup processes complete in approximately two minutes and the K2 Summit Production Client is ready for connection and operation. 8 K2 Dyno Replay System Quick Start Guide 16 May 2011
9 Configure network Configure network If the network has not previously been configured, configure it now. A K2 Dyno Controller package configured at the factory will have these settings already configured. On both the K2 Summit Client and on the K2 Dyno Controller, use standard Windows operating system procedures to configure a static IP address. IP addresses must be on the same subnet. You can also configure a host name if desired. 16 May 2011 K2 Dyno Replay System Quick Start Guide 9
10 Chapter 1 Installation Configure K2 Summit Client channels Configure channels according to your required formats and resolutions. 1 Open AppCenter and logon with the K2 administrator account. If a licensing message appears, refer to K2 Release Notes. 2 Click System Configuration. A er nte AppCe 3 Click tabs, buttons, and scroll bar to locate settings. 4 Select from drop-down lists to make settings. 5 Click OK and Yes to save settings. For the default K2 administrator account, use the following to logon: Username: K2Admin Password: K2admin (The password is case sensitive) In Configuration Manager, click Channel and then select a channel tab to make settings for 2 record 2 play mode as follows: Configure channels C1 and C2 as record channels. Make video and audio settings as appropriate for your input. Configure channels C3 and C4 as play channels. Make video and audio settings as appropriate for your output. If using ChannelFlex features, refer to the K2 AppCenter User Manual. 10 K2 Dyno Replay System Quick Start Guide 16 May 2011
11 Monitor K2 Summit Client channels Monitor K2 Summit Client channels On the VGA monitor connected to the K2 Summit Client, you can monitor the four channels. This requires an AppCenter Pro license. In AppCenter, click View Video Monitor Toolbar Full Screen Video Monitor K2 SUMMIT PRODUCTION CLIENT TIP: You can also double-click on a monitor area in multi-view or control screen to switch between views. 16 May 2011 K2 Dyno Replay System Quick Start Guide 11
12 Chapter 1 Installation 12 K2 Dyno Replay System Quick Start Guide 16 May 2011
13 2 Chapter Operation Start using the K2 Dyno Controller 1 When you start the K2 Dyno Replay Controller, the Server List displays. y pla Re nt K2 Clie 2 Select the K2 Summit Client, or touch Add Server and enter the server name. 3 Select Connect or Reconnect. Select New session. 4 5 Set C1 and C2 to Recorder, C3 and C4 to Player. Touch On and then touch Start. After Start is pressed, the Home tab displays on the controller s touch screen and on its VGA output screen. 16 May 2011 K2 Dyno Replay System Quick Start Guide 13
14 Chapter 2 Operation View home page status 1 Select Home tab 2 Check available remaining storage* 3 Check audio levels, press level meters *The remaining storage time is available in terms of an Event Day. Dyno takes into account the available time for all Record channels. Select input and playout channels 1 Select A or B input 2 Select P1 or P2 (camera angle) playout PGM P1 PVW P2 M/E Send Goto To gang channels, press both P1 and P2 at the same time. For more information about channel operation modes, refer to Channel operation overview on page K2 Dyno Replay System Quick Start Guide 16 May 2011
15 Chapter 2 Operation Replay 1 Start Live mode (button lights red) al Loc il ve PGM P1 PVW P2 M/E Send Goto 3 Play or t Fas 2 Slo Mo playback Player channel program is controlled. Live/Local button Red al Loc e Liv Clear al Loc e v i L = Live: You are watching the live video of the selected channel being recorded. Yellow = Replay: You are controlling your replay in still, slow motion or normal playout mode. al The recording of the live video continues Loc e Liv while you are in this mode. = Off: A highlight clip or playlist has been loaded into a player channel. Shift button Clear ft Shi = Bottom function: For each button, the function shown on the bottom of the button label is currently active. Trim Take Yellow = Top function: For each button, the function shown on the top of the button label is currently active. Trim t f hi S Take To switch angles during playout, press A, B or C. The Shift button also affects controls displayed on the touch screen. For more information on button functions, refer to Controller buttons: Reference on the inside back cover. 16 May 2011 K2 Dyno Replay System Quick Start Guide 15
16 Chapter 2 Operation Capture highlight clip 7 Change highlight views* 6 View highlights on Highlight tab *Views: Turn knob to desired In Point Add highlight to HL bin Add Lib Add HL M/E Send Goto Highlight clip plus metadata keywords Press In button Top In 4 PGM P1 Btm Out Turn knob to desired Out Point PVW P2 Press Out button Highlight clip plus thumbnail Highlight clip with text only 16 K2 Dyno Replay System Quick Start Guide 16 May 2011
17 Chapter 2 Operation Add metadata 1 3 Select highlight Assign stars (rating)* 4 2 Highlight name* 5 *Keyboard shortcuts: Name: Enter + name + Enter Rating (stars): F1 Keywords - Quick Key number recalls that keyword 7 Return to highlight screen Open the metadata screen 6 Select preset keyword names* Auto: go to next category after input. SET FKEYS: Set F2 -F9 for frequent keywords You can pre-make metadata keywords with the Dyno Keyword Editor application, which you install on a separate PC. You then import K2 Dyno Editor files (XML) into the Dyno Controller by opening them on the Library tab. See Import page. 16 May 2011 K2 Dyno Replay System Quick Start Guide 17
18 Chapter 2 Operation Play highlight clip 2 Select a highlight 1 Select Highlight tab 18 3 Cue highlight ch MatUp Cue PGM P1 PVW P2 M/E Send Goto t 4 Play highlight. Fas You can customize play operations as follows: On the Home tab or VGA monitor, click Auto Cue. select a highlight, it is automatically cued up. Auto Cue In this mode, when you On the Home tab or VGA monitor click Auto Play. select a highlight, it automatically plays. Auto Play In this mode, when you K2 Dyno Replay System Quick Start Guide 16 May 2011
19 Chapter 2 Operation Create a playlist: Controller interface 1 Select Highlight tab 2 Select a highlight 3 Add highlight to playlist PL New PL Add On the controller touch screen, select the Playlist tab to see the highlight clip added to the playlist. Create a playlist: VGA interface Click and drag highlights into playlist You can also move highlight clips within the playlist using the mouse or with the cut/ move or copy/paste soft keys. 16 May 2011 K2 Dyno Replay System Quick Start Guide 19
20 Chapter 2 Operation Play a playlist with mix effects 1 Cue playlist (press 3 times) + + M/E PL M/E PL M/E PL 2 Select global video mix effects or toggle the button next to the video track to apply an effect for the individual track. 4 4 Move to next highlight with flying mix effects Trim Take Play the playlist with mix effects To select mix effects, such as transition types, touch the button next to the event and toggle through the options. You can put playlists into a loop by pressing the Loop button. The Playlist button performs different tasks based on how many times you press it: Press the Playlist button once the Playlist tab displays Press the Playlist button twice the last clip inserted is cued up Press the Playlist button three times the first event in the playlist is cued up 3 Fast 20 K2 Dyno Replay System Quick Start Guide 16 May 2011
21 Chapter 2 Operation Setting up auxiliary audio 1 On the Home tab, touch the Audio Meters panel. Touch Show Aux. 2 3 Select P1 or P2 Touch the audio output for main and aux audio Add auxiliary audio to a playlist 2 1 Open a playlist and enable aux audio If desired, toggle the Main button to view only auxiliary audio 3 From a bin, select the audio clip and press Add Pl Audio clips display a speaker icon. Audio clips are derived from importing 16 bit, 48 khz.wav files. The Playlist screen displays two auxiliary audio events at a time. You can add audio clips from a Highlight or a Library bin. 16 May 2011 K2 Dyno Replay System Quick Start Guide 21
22 Chapter 2 Operation Import 4 Select Dyno 3 Touch 2 Select Controller Session list Library tab 22 1 Insert USB drive Dyno Controller 5 Double-touch to open USB drive To import a clip, touch Copy, then Paste in 1 the destination bin. OR To import a.xml file, touch Open and confirm that you want to overwrite the current file. 6 Select an item, such as a highlight clip or.xml file On the Config tab touch Network Transfers to monitor transfer progress. Indicators on highlight clip thumbnails also show progress. If you are importing keywords, confirm that you want to overwrite any existing keyword file already on the Dyno. You create these files with the Dyno Keyword Editor application. K2 Dyno Replay System Quick Start Guide 16 May 2011
23 Chapter 2 Operation Set export path If you re exporting to a non-network drive, insert a USB drive before setting the export path. 2 1 Select Config tab Touch Network 3 Touch 4 Select the USB drive or Send List server and select a bin. 5 Touch Primary, any other desired angles, or All. 6 Touch Accept. Export To monitor transfer progress on the CONFIG tab, touch Network Transfers. 1 Select HIGHLIGHT tab 16 May Select highlight clip ft 3 Press Shift Shi 4 Press Send d Sen o Got K2 Dyno Replay System Quick Start Guide 23
24 Chapter 2 Operation Manage bins 1 24 Touch HIGHLIGHT or LIBRARY tab 2 Open the bin screen Browse up to see bins 4 Double-touch to open a bin If desired, use keyboard to rename bin. Touch < or > to navigate between bins.you can use a keyboard to navigate bins on the Library tab. K2 Dyno Replay System Quick Start Guide 16 May 2011
25 Chapter 2 Operation Shutdown K2 Dyno Controller 3 1 Select CONFIG tab Touch EXIT 2 ft Shi 4 Toggle through shutdown modes and record options 16 May Touch the corresponding action button K2 Dyno Replay System Quick Start Guide 25
26 Chapter 2 Operation Channel operation overview The following sections explain channel operation modes. Standard mode 3 Record, 1 Playback/PGM K2 Summit Client Record Record Record Play C1 A K2 Dyno Controller The 3 Record and 1 Playback channel set-up is done when the session is configured at start-up screen A,B,C angles can be selected for playback on the D (P2) channel In this mode the P1 and P2 Player channel always illuminates red. Multichannel independent mode 2 Record, 2 Playback. Also known as A-Side, B-Side. Record C1 A Play C3 P1 P1 C2 B C3 C C4 D Cue A or B angle on P1 or P2 channel. Playback independently P2 P2 Record C2 Play C4 PGM playout with transitions The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen B P2 P2 Select either P1 or P2 button to control that playout channel. A,B, angles can be selected for playback on P1 or P2 P1 and P2 playout channel content can be swapped by pressing buttons Fn then Take. 26 K2 Dyno Replay System Quick Start Guide 16 May 2011
27 Chapter 2 Operation Multichannel + gang mode 2 Record, 2 Playback. Player channels in sync. Record C1 Record C2 A B Play C3 P1 P1 gang The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen A,B, angles can be selected for playback on the P1, (C3) or P2 (C4) Gang operation is based on Independent mode with selection of both channels and turning on gang Preview/Program mode 2 Record, 1 Playback/PGM, 1 Preview. Toggle Preview control mode on and off. Press Shift then PVW or PGM button Cue A or B angle on P1 or P2 channel. Playback independently then put in Gang mode. Record C1 A Play C3 P1 PGM TAKE Play C4 P2 P2 gang Press both P1 and P2 buttons at same time to enter Gang mode. Press P1 or P2 to get out of Mutichannel mode. Record The 2 Record and 2 Playback channel set-up is done when the session is configured at start-up screen A,B, angles can be selected for playback on the C Program (C3) and D (C4) Preview In this mode, the PVW button illuminates yellow when PGM is selected. PVW lights green when selected and the Take button illuminates green to indicate ready for Take to PGM channel. C2 B Play C4 P2 Cue A or B angle on Preview channel. PVW Press Take to put Preview cued point onto Program. 16 May 2011 K2 Dyno Replay System Quick Start Guide 27
28 Chapter 2 Operation K2 AppCenter Elite ChannelFlex configurations Dyno-Packs are available to provide ChannelFlex features, such as these illustrated examples. K2 Dyno Controller setup: 4 record, 2 playout SD I IN 1( SDI A) IN2 C1 (B) C3 Record SDI IN1 2 I IN PGM P1 ) out SDI Play C4 (C) C2 K2 Summit Client SDI out PVW P2 (D) SD K2 Dyno Controller setup: 1 Super Slo Mo, 2 regular inputs, 2 playout SDI IN1 SDI IN2 (A) C1 Super Slo-Mo SDI IN3 C3 Record SDI IN1 2 I IN (C) PGM P1 ) out SDI Play C4 C2 K2 Summit Client SDI out PVW P2 (D) SD There are many other types of configuration setups. For more information, consult your Grass Valley representative. 28 K2 Dyno Replay System Quick Start Guide 16 May 2011
29 Chapter 2 Operation Tips and shortcuts To assign a rating (stars) to a highlight clip, use keyboard shortcut F1. The Shift button toggles between the top and bottom functions, as labeled on the controller s buttons. The Shift button also affects the function of controls displayed on the touch screen. From Config Panel, you can adjust controller panel attributes such as LCD and button brightness. You can adjust the speed, range, and other parameters of the jog knob and the T-bar. To play an angle from the beginning of the clip, press FN and then press A or B or C. Swap channels between PI and P2 playout channels by pressing Fn and then Take. To cue up a highlight, double-tap on the highlight. All Angle Playlist select highlight clip, press Fn then Add PL. Change angles in the playlist Fn and Angle button Slot box selection: To select a bin, enter its number. Example: typing 1 selects bin 1. To select a particular slot inside a bin, type the bin number and the slot number. Example: typing 1.2 cues up the second slot in bin 1. To select a particular angle, type the bin, slot, and angle number. Example, typing selects the third angle of the second slot in bin 1 To add a pause to a single event in a playlist, press Fn and the corresponding M/E symbol to the right of the event. 16 May 2011 K2 Dyno Replay System Quick Start Guide 29
30 Chapter 2 Operation 30 K2 Dyno Replay System Quick Start Guide 16 May 2011
31 Chapter 3 Problems and solutions The following table provides corrective action for some common problems. Problem Possible Cause Corrective Action Dyno Replay Controller can not connect to K2 Summit Client. Play channel video output is periodically unstable in E-to-E mode. The channel output is black in E-to-E, but playback is fine. Audio level too high or too low Digital video display device does not display properly. Bad cable connection or network setup. Video reference is not connected. Loss of input signal. Record or play channel audio level adjusted too low. Wrong video output type selected for the Play channel. Check network cable connections. At the Command Prompt, ping the network IP address. If E-to-E mode is used, you must connect a video reference signal. Verify that you have a valid input signal. In Summit AppCenter, use the audio level in recorder to adjust audio level. Use audio level adjust in player to adjust audio output level. Verify and select video output type required by the display device (see display device manuals). 16 May 2011 K2 Dyno Replay System Quick Start Guide 31
32 Chapter 3 Problems and solutions Finding more information You can find the information you need in product manuals and elsewhere. K2 Dyno Release Notes and K2 Release Notes The release notes contain the latest information about the software shipped on your system. The information includes software upgrade instructions, software specifications, software requirements, feature changes from the previous releases, and any known problems. Because release notes contain the latest information, they are provided as a printed document, rather than being included in the Documentation Set. K2 Summit Production Client Quick Start Guide You receive this guide in the product packaging with your K2 Summit Production Client. The Quick Start Guide provides step-by-step installation instructions for basic installation and operation of your K2 Summit Production Client, including recording and playing clips. K2 Documentation Set The full set of support documentation, including this Quick Start Guide, is available on the Documentation Set zip file that you download with your product. The K2 Documentation Set includes the following documents: K2 Dyno Installation Manual Provides instructions for a installing a K2 Dyno Replay System using a K2 Solo Media Server or a K2 Summit Production Client that is not part of a Dyno-Pack and has not been previously controlled by a K2 Dyno Controller. K2 Dyno User Manual Provides instructions for configuring and operating the K2 Dyno Replay Application via the controller and the VGA interface. K2 Dyno Service Manual Contains information on servicing and maintenance. K2 System Guide Contains the product specifications and step-by-step instructions for modifying system settings. K2 AppCenter User Manual Provides instructions for configuring and operating the media channels of the K2 Summit Production Client. K2 Summit Production Client Service Manual Contains information on servicing and maintenance. K2 Solo Media Server Service Manual Contains information on servicing and maintenance. 32 K2 Dyno Replay System Quick Start Guide 16 May 2011
33 Grass Valley Product Support Grass Valley Product Support To get technical assistance, check on the status of a question, or to report a new issues, contact Grass Valley Product Support via , the Web, or by phone or fax. Web Technical Support To access support information on the Web, visit the product support Web page on the Grass Valley Web site. You can download software or find solutions to problems. World Wide Web: Technical Support Address:gvgtechsupport@grassvalley.com Grass Valley Knowledge Base: In the Knowledge Base you can search by topic, search by product, or browse the Table of Contents to find Frequently Asked Questions (FAQ). Telephone Support Use the following information to contact Product Support by phone. International Support Centers Our international support centers are available 24 hours a day, 7 days a week. Support Center Toll free In country France United States Authorized Local Support Representative A local support representative may be available in your country. To locate a support center during normal local business hours, refer to the following list. This list is regularly updated on the website for Grass Valley Product Support ( After hours local phone support is also available for warranty and contract customers. Region Country Telephone Asia China Hong Kong, Taiwan, Korea, Macau Japan Southeast Asia - Malaysia Southeast Asia - Singapore India May 2011 K2 Dyno Replay System Quick Start Guide 33
34 Chapter 3 Problems and solutions Region Country Telephone Pacific Australia New Zealand For callers outside Australia or New Zealand Central America, South America All North America North America, Mexico, Caribbean ; Europe UK, Ireland, Israel Benelux Netherlands +31 (0) Benelux Belgium +32 (0) France ; Germany, Austria, Eastern Europe Belarus, Russia, Tadzhikistan, Ukraine, Uzbekistan Northern Europe Southern Europe Italy Southern Europe Spain Middle East, Near East, Africa Middle East Near East and Africa ; K2 Dyno Replay System Quick Start Guide 16 May 2011
35 Waste Electrical and Electronic Equipment Directive Waste Electrical and Electronic Equipment Directive 16 May 2011 K2 Dyno Replay System Quick Start Guide 35
36 Controller buttons: Reference 1 New PL Create new playlist Add PL Add current selected item to PL as bottom event 2 Add Lib Add clip to Library type bin (Default bin) Add HL Add selected item to selected Highlight bin. 3 Match Cue Up 4 Shift Fast Match to timecode point in record train Cue up current selected item Enable Shift Function. On buttons, toggles between top and bottom functions. On touch screen, similarly toggles function of controls. Toggles Fast Jog on/off Play Open Open selected playlist Stop D A E B F C Locking REW Navigate to previous Locking FFW Navigate to next Change current angle to D Change current angle to A Change current angle to E Change current angle to B Change current angle to F Change current angle to C 12 Fn Invokes special functions 13 Local Switch between local (playback) and Live live (record) views on play channels 14 Brws Browse remote record trains Add Mrk Adds mark at current point in record train 15 PGM Toggles Preview/Program mode P1 Player 1 output or ganged channel 16 PVW Toggles Preview/Program mode P2 Player 2 output or ganged channel 17 M/E PL Turn on/off Flying M/E (Lights green) Open Playlist page. If cue point not in PL, cue up last. If cue point in PL, cue up first. 18 Send Send clip to preset path Goto Go to selection, HL, TC Top Btm Trim Take Cue up beginning of clip or playlist Mark in point Cue up to end of clip or playlist Mark out point Trim HL or event in and out point Skip to next event in playlist. Swap video on preview channel and program channel, complete Trim function. The Shift button toggles between top and bottom functions. To add multiple clips in the order selected, press and hold Fn. To add a range of clips, press Shift and select first and last clip in the series.
K2 Dyno Replay Controller USO RESTRITO. Installation Manual. Software Version 2.0
K2 Dyno Replay Controller Installation Manual Software Version 2.0 071-8744-02 June 2011 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040.001 The Quality System of:
More informationK2 APPCENTER APPLICATION SOFTWARE
K2 APPCENTER APPLICATION SOFTWARE K2 AppCenter User Manual Software Version 7.1 071-8723-00 October 2009 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040.001 The Quality
More informationK2 Dyno S. Replay Controller. User Manual. Software Version
K2 Dyno S Replay Controller User Manual Software Version 3.1 071-8909- 00 20130719 K2 Dyno S Replay Controller User Manual Software Version 3.1 071-8909- 00 20130719 Contents Introduction...9 What is
More informationAMP AMP AT A GLANCE ADVANCED MEDIA PROTOCOL VERSION 1.1
AMP ADVANCED MEDIA PROTOCOL AMP AT A GLANCE VERSION 1.1 JAN 2006 Copyright Trademarks Disclaimer U.S. Government Restricted Rights Legend Revision Status Copyright 2004 Thomson Broadcast and Media Solutions,
More informationPower Analyzer Firmware Update Utility Version Software Release Notes
Power Analyzer Firmware Update Utility Version 3.1.0 Software Release Notes Contents General Information... 2... 2 Supported models... 2 Minimum system requirements... 2 Installation instructions... 2
More informationU85026A Detector 40 to 60 GHz
Operating and Service Manual U85026A Detector 40 to 60 GHz Serial Numbers This manual applies directly to U85026A detectors with serial numbers 100 and above. For additional information on serial numbers,
More informationAPPLICATION NOTE. ChannelFlex for the K2 Summit/ K2 Solo Media Servers
APPLICATION NOTE ChannelFlex for the K2 Summit/ K2 Solo Media Servers Tim Slate, Director of Product Management September 2010 The K2 Summit is described as a four-channel media server, the K2 Solo as
More informationProgramming Note. Agilent Technologies Quick Reference Guide For the 8757D/E Scalar Network Analyzer
Programming Note Agilent Technologies Quick Reference Guide For the 8757D/E Scalar Network Analyzer Manufacturing Part Number: 08757-90130 Printed in USA Print Date: July 1992 Agilent Technologies, Inc.
More informationSafety. Introduction
KickStart Guide Safety Introduction Safety precautions Before using this product, see the safety precautions associated with your instrument. The instrumentation associated with this software is intended
More informationUSER MANUAL. Version April 2013 USO RESTRITO
USER MANUAL Version 2.1 - April 2013 Copyright EVS Broadcast Equipment Copyright 2011-2013. All rights reserved. Disclaimer The information in this manual is furnished for informational use only and subject
More informationApplication. Using the Grass Valley K2 Solo Media Server in a File-based Graphics Workflow with a Range of Production Switchers
Application Note Using the Grass Valley K2 Solo Media Server in a File-based Graphics Workflow with a Range of Production Switchers Jim Pierson, Technical Sales Support Engineer July 2010 This application
More informationInstallation Note. Removable Hard Disk Drive Upgrade Kit. For All PNA Series RF Network Analyzers. Network Analyzer Model Number
Installation Note Removable Hard Disk Drive Upgrade Kit For All PNA Series RF Network Analyzers Network Analyzer Model Number E8356A, E8357A, E8358A E8801A, E8802A, E8803A N3381A, N3382A, N3383A Upgrade
More informationT2 INTELLIGENT DIGITAL DISK RECORDER Express/Pro/Elite
T2 INTELLIGENT DIGITAL DISK RECORDER Express/Pro/Elite Release Notes Software Version 2.1 (July 2013) www.grassvalley.com Grass Valley Product Support For technical assistance, to check on the status of
More informationMatthew Allard September 2010
Dorna Sports Dorna Sports Use of the Grass Valley K2 Dyno Replay System and K2 Dyno Production Assistant (PA) for Coverage of the FIM MotoGP World Championship Matthew Allard September 2010 TABLE OF CONTENTS
More informationCISCO IP PHONE 7970G NEW! CISCO IP PHONE 7905G AND 7912G XML
Q & A CISCO IP PHONE 7970G NEW! CISCO IP PHONE 7905G AND 7912G XML GENERAL QUESTIONS Q. What is the Cisco IP Phone 7970G? A. The 7970G is our latest state-of-the-art IP phone, which includes a large color,
More informationUsing the Grass Valley K2 Solo Media Server in a File-based Graphics Workflow with a Range of Production Switchers
Using the Grass Valley K2 Solo Media Server in a File-based Graphics Workflow with a Range of Production Switchers Jim Pierson, Technical Sales Support Engineer Grass Valley, a Belden Brand July 2010 TABLE
More informationUSER MANUAL. Xedio Playout Organizer. Version August 2014
USER MANUAL Xedio Playout Organizer Version 4.50 - August 2014 USER MANUAL Xedio Suite 4.50 Xedio Playout Organizer Copyright EVS Broadcast Equipment SA Copyright 2010-2014. All rights reserved. Disclaimer
More informationNokia Intellisync Mobile Suite Client Guide. S60 Platform, 3rd Edition
Nokia Intellisync Mobile Suite Client Guide S60 Platform, 3rd Edition Published May 2008 COPYRIGHT Copyright 1997-2008 Nokia Corporation. All rights reserved. Nokia, Nokia Connecting People, Intellisync,
More informationEND-USER MANUAL. Sennheiser HeadSetup Pro
END-USER MANUAL Sennheiser HeadSetup Pro Content 1. Introduction 4 1.1 Product overview 4 1.2 Scope of the document 4 1.3 Intended audience of this document 4 2. System requirement 4 2.1 Hardware requirement
More informationKeysight Technologies Accelerate Program Development using Keysight Command Expert with LabVIEW. Application Note
Keysight Technologies Accelerate Program Development using Keysight Command Expert with LabVIEW Application Note This application note contains two main sections: Command Expert Basics Introduces you to
More informationDialling Access to the PGi Virtual Meeting Room Service (All Methods)
Dialling Access to the PGi Virtual Meeting Room Service (All Methods) There are several different user types that need to be considered when accessing a meeting hosted in a PGi Virtual Meeting Room. Definitions
More informationKeysight Technologies 8163B Lightwave Multimeter 8164B Lightwave Measurement System 8166B Lightwave Multichannel System.
Keysight Technologies 8163B Lightwave Multimeter 8164B Lightwave Measurement System 8166B Lightwave Multichannel System Data Sheet 02 Keysight 8163B Lightwave Multimeter, 8164B Lightwave Measurement System,
More informationKeysight Technologies Accelerate Program Development using Command Expert with Keysight VEE Pro. Application Note
Keysight Technologies Accelerate Program Development using Command Expert with Keysight VEE Pro Application Note This application note contains two main sections: Command Expert Basics Introduces you to
More informationTable of Contents TABLE OF CONTENTS. BTAir User Manual Rev. 1
User Manual TABLE OF CONTENTS Table of Contents 1. About The App... 1 Downloading the App... 1 Text Conventions... 1 Symbols... 1 Disclaimer... 1 2. Operation... 2 Before You Begin... 2 Startup... 2 Program
More informationConferencing and Recording
Conferencing and Recording User Guide 03 July 2018 Contents About conferencing 3 How to schedule a meeting 4 How to join a StarLeaf meeting 6 About global telephone dial-in numbers 10 Europe, Middle East,
More informationRef No: Date: January 20, 1999 ELECTRICAL AND ELECTRONIC EQUIPMENT NO. 4
Ref No: 99-003 Date: January 20, 1999 ELECTRICAL AND ELECTRONIC EQUIPMENT NO. 4 To: Manufacturers of Cord-Connected Equipment Subject: Publication of Technical Information Letter No. K-18 Interim Certification
More informationKeysight Technologies Accelerate Program Development using Command Expert with Keysight VEE Pro. Application Note
Keysight Technologies Accelerate Program Development using Command Expert with Keysight VEE Pro Application Note This application note contains two main sections: Command Expert Basics Introduces you to
More informationEDIUS 7. Release Notes EDIT ANYTHING. Software Version 7.3 (April 2014)
EDIUS 7 EDIT ANYTHING Release Notes Software Version 7.3 (April 2014) www.grassvalley.com Grass Valley Product Support For technical assistance, to check on the status of a question, or to report a new
More informationSupplier Responding to New Products RFP Event
This presentation contains instructions focused on the required steps needed for suppliers to respond to a RFP request made from the New Products group. For more general information on how to respond to
More informationKeysight N2753A and N2754A Windows XP to Windows 7 Upgrade Kits For Infiniium 9000, 90000, and X-Series Oscilloscopes. Configuration Guide
Keysight N2753A and N2754A Windows XP to Windows 7 Upgrade Kits For Infiniium 9000, 90000, and 90000 X-Series Oscilloscopes Configuration Guide 02 Keysight N2753A and N2754A Windows XP to Windows 7 Upgrade
More informationBuild Operator Menu Multiple menu configuration control for the 5DX Auto UI
Multiple menu configuration control for the 5DX Auto UI Application Note User Contributed Disclaimer This is not a legal document, however, this is user contributed software and as such may be outdated
More informationSiebel esmart (Siebel eservice Management and Request Tool) Customer Training Guide
Siebel esmart (Siebel eservice Management and Request Tool) Customer Training Guide 1 Contents esmart Overview esmart Service Request Process Overview esmart How to Login into esmart? esmart Password Change
More informationTektronix Logic Analyzer Probes P5900 Series Datasheet
Tektronix Logic Analyzer Probes P5900 Series Datasheet Applications Digital hardware validation and debug Monitoring, measurement, and optimization of digital hardware performance Embedded software integration,
More informationKeysight Technologies Accelerate Program Development using Keysight Command Expert with MATLAB. Application Note
Keysight Technologies Accelerate Program Development using Keysight Command Expert with MATLAB Application Note Introduction Keysight Command Expert for fast and easy instrument control! Keysight Technlologies,
More informationDemo Guide. Keysight Multi-Operator with M937xA PXIe Vector Network Analyzers
Demo Guide Keysight Multi-Operator with M937xA PXIe Vector Network Analyzers Table of Contents Preparation for Demo... 3 Equipment Requirements... 3 Setup Four Operators Configuration Using 4 x 4-Ports
More informationRTPA2A. TekConnect probe adapter for real-time spectrum analyzers. Tektronix high-performance probing solutions. Applications. Notice to EU customers
RTPA2A Extends the troubleshooting capabilities of Tektronix real-time spectrum analyzers with the world s best probes Troubleshoot and determine RF faults directly on circuit boards where no coaxial connection
More informationK2 Media Server & Storage Platform
K2 Media Server & Storage Platform 1. Are K2 clients PCs with standard I/O boards? No. K2 clients are purpose-built devices with the performance, reliability and real-time processes necessary for use in
More informationKeysight Technologies
Keysight Technologies FET Characterization Using the B2900A Series of SMUs Technical Overview Introduction Keysight B2901/02/11/12A Precision Source/Measure Unit Keysight B2901A Precision SMU, 1ch, 100
More informationKeysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter Configuration Guide The world s only graphical Picoammeter/Electrometer that can confidently measure down to 0.01 fa and up to
More informationUSO RESTRITO. Model No. DMAT-AB SPORTS CONTROLLER. Abekas Mira. For. Digital Video Production Server. User Manual. Version 1.3
12843 Foothill Blvd. Suite C Sylmar, California 91342 V: 818.898.3380 F: 818.898.3360 sales@dnfcontrols.com Model No. DMAT-AB SPORTS CONTROLLER For Abekas Mira Digital Video Production Server User Manual
More informationDaniel MeterLink Software v1.40
Quick Start Manual P/N 3-9000-763, Rev K June 2017 Daniel MeterLink Software v1.40 for Daniel Gas and Liquid Ultrasonic Flow Meters Software License Agreement PLEASE READ THIS SOFTWARE LICENSE AGREEMENT
More informationDVR 528 Digital Video Camera
DVR 528 Digital Video Camera User Manual 2010 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the
More informationAgilent N8300A Wireless Networking Test Set N630XA Measurement Applications and N7300 Series Chipset Software
Agilent N8300A Wireless Networking Test Set N630XA Measurement Applications and N7300 Series Chipset Software Configuration Guide Introduction The Agilent N8300A wireless networking test set is a one-box
More informationCodian IP VCR IP VCR 2200 Series
Codian IP VCR IP VCR 2200 Series Getting Started: Watching and Creating Recordings Table of contents Watching recordings stored on the IP VCR... 3 Watching recordings from a video endpoint... 3 Connecting
More informationKeysight Technologies E36100 Series Programmable DC Power Supplies. Data Sheet
Keysight Technologies E36100 Series Programmable DC Power Supplies Data Sheet 02 Keysight E36100 Series Programmable DC Power Supplies - Data Sheet Power forward Designs change and so should your DC power
More informationKeysight Technologies Using PXI Modules, I/0 Libraries and IVI Switch Drivers with National Instruments Switch Executive.
Keysight Technologies Using PXI Modules, I/0 Libraries and IVI Switch Drivers with National Instruments Switch Executive Application Note Table of Contents Using Keysight PXI modules with National Instruments
More informationField-Replaceable Units and Region- and Country-Specific Power Cables
CHAPTER 5 Field-Replaceable Units and Region- and Country-Specific Power Cables June 5, 2013, This chapter describes the tasks you perform to replace the Field-Replaceable Units (FRUs) for your Cisco TelePresence
More informationThinkPad i Series 1200/1300 Setup Guide
Part Number: 04P496 ThinkPad i Series 00/00 Setup Guide Unpacking checklist Thank you for purchasing the IBM ThinkPad i Series 00/00 computer. Match the items on this list with the items in the box. If
More informationKeysight Technologies Using FieldFox RF and Microwave Analyzers with Mass Storage Devices. Application Brief
Keysight Technologies Using FieldFox RF and Microwave Analyzers with Mass Storage Devices Application Brief Introduction This document describes the capabilities of using FieldFox with mass storage devices.
More informationAgilent N1918A Power Analysis Manager
Agilent N1918A Power Analysis Manager Data Sheet Features Enhanced viewing on large PC display Intuitive GUI for easy navigation to functions Multiple flexible display formats List view of more than 20
More informationTroubleshooting Ethernet Problems with Your Oscilloscope APPLICATION NOTE
Troubleshooting Ethernet Problems with Your Oscilloscope Introduction Ethernet is a family of frame-based computer networking technologies for local area networks (LANs), initially developed at Xerox PARC
More informationUSING VMWARE HORIZON USER S GUIDE FOR MACINTOSH
U N I V E R S I T Y O F S O U T H E R N C A L I F O R N I A USING VMWARE HORIZON USER S GUIDE FOR MACINTOSH NOVEMBER 2015 U N I V E R S I T Y O F S O U T H E R N C A L I F O R N I A 2015 UNIVERSITY OF
More informationSetting up a LAN Instrument Network. Installation Guide
Setting up a LAN Instrument Network Installation Guide Notices Agilent Technologies, Inc. 2010 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval
More informationBroadcast. User Guide. 1 Before Installation P2 Option VARICAM Option XDCAM Option GXF Option...
Broadcast User Guide Contents 1 Before Installation................ 1 2 P2 Option....................... 2 3 VARICAM Option................ 12 4 XDCAM Option.................. 16 5 GXF Option.....................
More informationSettings for Timecode Chasing for T2 Express/Pro/Elite April 2015
Settings for Timecode Chasing for T2 Express/Pro/Elite April 2015 Introduction With Service Pack 2.0, released in November 2014, any T2 Express/Pro/Elite from Grass Valley, a Belden Brand, has the ability
More informationCyberLink. U Webinar. User's Guide
CyberLink U Webinar User's Guide Copyright and Disclaimer All rights reserved. To the extent allowed by law, U Webinar IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
More informationIBM ThinkPad 770 Setup Guide
IBM ThinkPad 770 Setup Guide IBM IBM ThinkPad 770 Setup Guide First Edition (September 1997) IBM might not be offering the products, services, or features discussed in this document in all countries,
More informationCisco Unified CallConnector for Microsoft Office Quick Reference Guide 1
Quick Reference Cisco Unified CallConnector for Microsoft Office Quick Reference Guide 1 Overview 2 Starting and Accessing Features 3 Using the Call Popup Window 4 Using QuickSearch 5 Toolbar Overview
More informationAgilent OpenLAB. Agilent Instrument Controller Installation and Configuration Guide
Agilent OpenLAB Agilent Instrument Controller Installation and Configuration Guide Notices Copyright Scientific Software, Inc 1997-2005 Agilent Technologies, Inc. 2005-2007. No part of this manual may
More informationHigh-Performance Differential Probes P7350 P7330 P6330 Datasheet
High-Performance Differential Probes P7350 P7330 P6330 Datasheet Applications Communications (Gigabit Ethernet, Fibre Channel, InfiniBand) Semiconductor characterization and validation PCI Express Serial
More informationIntellisync Mobile Suite Client Guide. S60 3rd Edition Platform
Intellisync Mobile Suite Client Guide S60 3rd Edition Platform Published July 2007 COPYRIGHT 2007 Nokia. All rights reserved. Rights reserved under the copyright laws of the United States. RESTRICTED RIGHTS
More informationVISA, SICL, VISA COM,
Agilent IO Libraries Suite 16.2 Quick Start Guide This Quick Start Guide describes how to: Install the Agilent IO Libraries Suite and instrument software Find the information you need to make instrument
More informationHeadSetup Pro Manager
Quick User Guide Contact information Support Portal: www.sennheiser.com/cco-support E-mail: hsuphelp@senncom.com Phone: Find your local support phone number and opening hours here below. Asia-Pacific Australia
More informationQuick Install Guide. ibypass TM I2BP-4x Rev A 11/14
- Quick Install Guide ibypass TM 40-10 I2BP-4x10 913-2106-01 Rev A 11/14 PLEASE READ THESE LEGAL NOTICES CAREFULLY. Trademarks and Copyrights Net Optics, and ibypass TM are registered trademarks of Net
More informationNokia Intrusion Prevention with Sourcefire Appliance Quick Setup Guide. Sourcefire Sensor on Nokia v4.8
Nokia Intrusion Prevention with Sourcefire Appliance Quick Setup Guide Sourcefire Sensor on Nokia v4.8 Part No. N450000774 Rev 001 Published September 2008 COPYRIGHT 2008 Nokia. All rights reserved. Rights
More informationKeysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter
Keysight B2980A Series Femto/Picoammeter Electrometer/High Resistance Meter Coniguration Guide The world s only graphical Picoammeter/Electrometer that can conidently measure down to 0.01 fa and up to
More informationDVR 505 Digital Camcorder
DVR 505 Digital Camcorder User Manual 2016 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property
More informationDedicated to the Science of Motion.
Dedicated to the Science of Motion Included CD Quick Start Guide FireWire Cable Typically Required Npaq Drive Rack and/or Digital Ndrive Motor(s) Computer FireWire Card Motor and Feedback Cables FireWire
More informationOFFICIAL USER MANUAL 1
OFFICIAL USER MANUAL 1 Contents: Getting Started with Musician Video Maker 3 Launching And Activating Musician Video Maker 3 Beta Tester Users 5 Start Mode And Demo Mode 6 Importing Your Video Footage
More informationChemiDoc and ChemiDoc MP Imaging Systems with Image Lab Touch Software Installation Qualification Protocol (IQ)
ChemiDoc and ChemiDoc MP Imaging Systems with Image Lab Touch Software Protocol (IQ) Catalog #17001401 and 17001402 Table of Contents Page Section 1: General Information... 3 1.1 Scope... 3 1.2 Protocol
More informationCTRL7100A CTRL7100A Instrument Controller
CTRL7100A CTRL7100A Instrument Controller Streaming capture to internal RAID of over 2 hours at full 800 MHz bandwidth enables environment recording and analysis of long event sequences SignalVu-PC and
More informationAgilent U8000 Series Single Output DC Power Supplies. Data Sheet
Agilent U8000 Series Single Output DC Power Supplies Data Sheet Key Features Excellent load and line regulation: (CV:
More informationUSER MANUAL. VTR Control Panel. Version December 2014 USO RESTRITO
USO RESTRITO USER MANUAL VTR Control Panel Version 6.57 - December 2014 USER MANUAL IPDirector 6.57 VTR Control Panel Copyright EVS Broadcast Equipment SA Copyright 2005-2014. All rights reserved. Disclaimer
More informationSPORTS CONTROLLER. For. Odetics Protocol USER MANUAL. For Software Version V and above
12843 Foothill Blvd., Suite D Sylmar, CA 91342 818 898 3380 voice 818 898 3360 fax www.dnfcontrols.com Model No. DMAT-O-42 SPORTS CONTROLLER For 4 Record / 2 Playback Configuration Odetics Protocol USER
More informationMediaNXS. Complete I/O Solution
MediaNXS Complete I/O Solution Table of Contents About MediaNXS... 1 Reference... 2 File Menu... 2 New Project... 2 Open Project... 2 Save Project... 2 Save Project As... 2 Add Media... 2 Import... 2 Export...
More informationKeysight B4655A FPGA Dynamic Probe for Xilinx. Data Sheet
Keysight B4655A FPGA Dynamic Probe for Xilinx Data Sheet 02 Keysight B4655A FPGA Dynamic Probe for Xilinx - Data Sheet The Challenge You rely on the insight a logic analyzer provides to understand the
More informationKeysight Technologies EPM and EPM-P Series Power Meters E-Series Power Sensors. Configuration Guide
Keysight Technologies EPM and EPM-P Series Power Meters E-Series Power Sensors Configuration Guide Introduction This configuration guide describes the standard configurations, options, and compatible accessories
More informationTekExpress 10GBASE-T Automated Compliance Software Features & Benefits
TekExpress 10GBASE-T Automated Compliance Software Features & Benefits Comprehensive Automated Solution for 10GBASE-T PHY Compliance One-button Selection of Multiple Tests and Four-channel Support Detailed
More information87421/22A Power Supply. Operating and Service Manual
87421/22A Power Supply Operating and Service Manual Agilent Part Number: 87421-90001 Printed in USA April 2001 Supersedes: September 1998 Notice The information contained in this document is subject to
More informationKeysight Technologies Using Source/Measure Unit as an Ammeter
Keysight Technologies Using Source/Measure Unit as an Ammeter B2900A Precision Source/Measure Unit Demo Guide 02 Keysight Using Source/Measure Unit as an Ammeter Demo Guide Introduction The Keysight B2900A
More informationhp l1619a smart attachment module
hp l1619a smart attachment module user s guide Smart Attachment Module 1 Notice This manual and any examples contained herein are provided as is and are subject to change without notice. Hewlett-Packard
More informationTraffic Offload. Cisco 7200/Cisco 7500 APPLICATION NOTE
APPLICATION NOTE Cisco 700/Cisco 700 Traffic offload allows exchange carriers to offload their telephony traffic to a packet network from the Public Switched Telephone Network (PSTN). By doing so, carriers
More informationAvigilon Control Center Standard Web Client User Guide. Version 5.6
Avigilon Control Center Standard Web Client User Guide Version 5.6 2006-2015, Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright,
More informationKeysight E5063A ENA Series Network Analyzer
Keysight E5063A ENA Series Network Analyzer 100 khz to 500 M/1.5 G/3 G/4.5 G/6.5 G/8.5 G/14 G/18 GHz Configuration Guide 02 Keysight E5063A ENA Series Network Analyzer - Configuration Guide Ordering Guide
More information615HD Digital Video Camera
615HD Digital Video Camera User Manual 2009-2011 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are
More informationN2753A and N2754A Windows XP to Windows 7 Upgrade Kits. For Infiniium 9000, 90000, and X-Series Oscilloscopes
N2753A and N2754A Windows XP to Windows 7 Upgrade Kits For Infiniium 9000, 90000, and 90000 X-Series Oscilloscopes All new Infiniium 9000, 90000, and 90000-X oscilloscopes now ship standard with Microsoft
More information4 GHz Active Probe P7240 Datasheet
4 GHz Active Probe P7240 Datasheet Applications High-speed digital systems design Component design/characterization Signal integrity, jitter, and timing analysis Mechanical engineering and test Measures
More informationUSER MANUAL. Version May 2015
USER MANUAL Version 6.60 - May 2015 USER MANUAL IPClipLogger 6.60 Disclaimer This manual and the information contained herein are the sole property of EVS Broadcast Equipment SA and/or its affiliates
More information4 GHz Active Probe P7240 Datasheet
4 GHz Active Probe P7240 Datasheet Applications: High-speed digital systems design Measures 3.0 V logic, InfiniBand, PCI Express, DDR, Rambus Data Lines, Gigabit Ethernet Component design/characterization
More informationKeysight Technologies I 2 C and SPI Protocol Triggering and Decode
Keysight Technologies I 2 C and SPI Protocol Triggering and Decode For Infiniium 9000 and S-Series Oscilloscopes Data Sheet This application is available in the following license variations. Fixed to an
More informationQuick Install Guide. Net Optics Tap. 10/100/1G Copper 10 LINK Rev C 3/15
Quick Install Guide Net Optics Tap 10/100/1G Copper Network Monitor Zero Delay 2 1 10 LINK 100 CT 1000 TP-CU3-ZD, -DC Gig Zero Delay Network Monitor Full Duplex Tap 2 1 10 LINK 100 CT 1000 TP-CU3, -DC
More informationAudio Conferencing. quick reference guide: conferencing. 1. Planning Your Meeting Feature Chart Scheduling Your Meeting...
quick reference guide: conferencing Audio Conferencing 1. Planning Your Meeting............................................ 2 2. Feature Chart...........................................5 3. Scheduling
More informationFrequently Asked Questions
Autodesk MotionBuilder 2012 Frequently Asked Questions Autodesk MotionBuilder 2012 software is a leading real-time animation software: an ideal tool for high-volume game animation pipelines, director-driven
More informationEND-OF-SALE AND END-OF-LIFE ANNOUNCEMENT FOR THE CISCO MEDIA CONVERGENCE SERVER 7845H-2400
END-OF-LIFE NOTICE, NO. 2566 END-OF-SALE AND END-OF-LIFE ANNOUNCEMENT FOR THE CISCO MEDIA CONVERGENCE SERVER 7845H-2400 Cisco Systems announces the end of life of the Cisco Media Convergence Server 7845H-2400.
More informationAgilent E363xA Series Programmable DC Power Supplies. Data Sheet
Agilent E363xA Series Programmable DC Power Supplies Data Sheet Reliable Power, Repeatable Results Single and triple output 80 W to 200 W output power Dual range output Low noise and excellent regulation
More informationKeysight Technologies E3620A and E3630A Non-programmable DC Power Supplies. Data Sheet
Keysight Technologies and E3630A Non-programmable DC Power Supplies Data Sheet 02 Keysight and E3630A Non-programmable DC Power Supplies Data Sheet Reliable Power, Repeatable Results Linear power supply
More information100GBASE-SR4/TDEC Compliance and Characterization Solution
100GBASE-SR4/TDEC Compliance and Characterization Solution Key features 80STDEC offers streamlined high performance Transmitter and Dispersion Eye Closure (TDEC) on a variety of Tektronix optical acquisition
More informationNEW METHOD FOR ORDERING CISCO 1700 SERIES MODULAR ACCESS ROUTERS AND CISCO 1800 SERIES INTEGRATED SERVICES ROUTERS SOFTWARE SPARE IMAGES
PRODUCT BULLETIN, NO. 2748 NEW METHOD FOR ORDERING CISCO 1700 SERIES MODULAR ACCESS ROUTERS AND CISCO 1800 SERIES INTEGRATED SERVICES ROUTERS SOFTWARE SPARE IMAGES Until recently, every release of Cisco
More informationAvigilon Control Center Web Client User Guide
Avigilon Control Center Web Client User Guide Version: 4.12 Standard PDF-WEBCLIENT-S-E-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice.
More informationNokia Intellisync Mobile Suite Client Guide. Palm OS Platform
Nokia Intellisync Mobile Suite Client Guide Palm OS Platform Published May 2008 COPYRIGHT Copyright 1997-2008 Nokia Corporation. All rights reserved. Nokia, Nokia Connecting People, Intellisync, and Intellisync
More information