DCR (Ohms) Body number (W) Output Aux / bias (khz) pri : sec pri : aux / bias (µh) pri sec aux / bias Schem size Mtg Designed for.
|
|
|
- Maria Craig
- 5 years ago
- Views:
Transcription
1 Document For complete specifications see Body size 2 Body size 3 Body size 4 Body size 7 Body size 13 This list of dc-dc and off-line switching converter transformers are stocked for immediate delivery and may be sampled at no cost. They are organized by input and sorted by output. These transformers also operate well in applications with power levels other than those shown and at a wide range of frequencies. The nominal frequency and circuit reference are only provided as a guide. If no transformer shown here meets your design criteria, consult Document 627 Coilcraft Structured Design Guide for Switching Transformers for a step-by-step guide to transformer design, or contact Coilcraft for assistance. Nominal L at Part Power freq. Turns ratio 0 A DCR (Ohms) Body number (W) Output Aux / bias (khz) pri : sec pri : aux / bias (µh) pri sec aux / bias Schem size Mtg Designed for Telecom input (36 72 Vdc) B0226-EL V, 1.67 ma : B 2 SM On Semi NCP V, 3 ma 1 : POE30P-33L V, 0.91 A 12 V, 20 ma : : D 4 SM PoE C1590-AL V, 0.91 A 12 V, 20 ma : : D 4 SM NSC LM5070 POE30P-50L V, 0.6 A 12 V, 20 ma : : D 4 SM PoE C1591-AL V, 0.6 A 12 V, 20 ma : : D 4 SM NSC LM5070 POE30P-12L V, 0.25 A 12 V, 20 ma : : D 4 SM PoE C1592-AL V, 0.25 A 12 V, 20 ma : : D 4 SM NSC LM5070 POE60F-18L V, 3.3 A 12 V, 20 ma : : D 9 SM PoE POE60C-18L V, 3.3 A 12 V, 20 ma : : D 6 SM PoE POE60D-18L V, 3.3 A 12 V, 20 ma : : D 6 SM PoE POE60F-25L V, 2.4 A 12 V, 20 ma : : D 9 SM PoE POE60C-25L V, 2.4 A 12 V, 20 ma : : D 6 SM PoE POE60D-25L V, 2.4 A 12 V, 20 ma : : D 6 SM PoE POE60F-33L V, 1.8 A 12 V, 20 ma : : D 9 SM PoE POE60C-33L V, 1.8 A 12 V, 20 ma : : D 6 SM PoE POE60D-33L V, 1.8 A 12 V, 20 ma : : D 6 SM PoE POE60F-50L V, 1.2 A 12 V, 20 ma : : D 9 SM PoE POE60C-50L V, 1.2 A 12 V, 20 ma : : D 6 SM PoE POE60D-50L V, 1.2 A 12 V, 20 ma : : D 6 SM PoE POE60F-12L V, 0.5 A 12 V, 20 ma : : D 9 SM PoE POE60C-12L V, 0.5 A 12 V, 20 ma : : D 6 SM PoE POE60D-12L V, 0.5 A 12 V, 20 ma : : D 6 SM PoE A0009-AL V, 3 A 24 V : : D 13 SM NSC LM5000 POE70P-33L V, 2.12 A 12 V, 20 ma : : D 7 SM PoE C1587-AL V, 2.12 A 12 V, 20 ma 10 1 : : D 7 SM NSC LM5070 POE70P-50L V, 1.4 A 12 V, 20 ma : : D 7 SM PoE C1588-AL V, 1.4 A 12 V, 20 ma 10 1 : : D 7 SM NSC LM5070 POE70P-12L V, 0.6 A 12 V, 20 ma : : D 7 SM PoE C1589-AL V, 0.6 A 12 V, 20 ma 10 1 : : D 7 SM NSC LM5070 D1766-AL V,.5 A : C 14 SM Linear LTC V, 1.5 A 1 : V, 2.5 A 1 : C1048-AL 10 5 V, 2 A 15 V, 0.2 A : : D 9 SM Linear LT1725 FA2519-AL V, 3.3 A 10 V, 20 ma : : D 14 SM NSC LM5071, LM5072 POE13F-18L V, 7.2 A 12 V, 20 ma : : D 9 SM PoE POE13F-25L V, 5.2 A 12 V, 20 ma : : D 9 SM PoE POE13F-33L V, 3.9 A 12 V, 20 ma : : D 9 SM PoE POE13P-33L V, 4.0 A 12 V, 20 ma : : D 8 SM PoE POE13F-50L V, 2.6 A 12 V, 20 ma : : D 9 SM PoE POE13P-50L V, 2.6 A 12 V, 20 ma : : D 8 SM PoE DA2362-AL V, 2.6 A 12 V, 20 ma : : D 8 SM Freescale MC34670 GA3372-AL V, 2.6 A 10 V, 20 ma : : D 8 SM NSC LM5015 Please check our website for latest information. Document Revised 09/03/08
2 Document Part Power Nominal freq. Turns ratio L at 0 A DCR (Ohms) Body number (W) Output Aux / bias (khz) pri : sec pri : aux / bias (µh) pri sec aux / bias Schem size Mtg Designed for Telecom input (36 72 Vdc) continued POE13F-12L V, 1.1 A 12 V, 20 ma : : D 9 SM PoE POE13P-12L V, 1.08 A 12 V, 20 ma : : D 8 SM PoE POE13F-19L V, 0.67 A 12 V, 20 ma : : D 9 SM PoE POE13P-19L V, 0.67 A 12 V, 20 ma : : D 8 SM PoE POE13F-24L V, 0.54 A 12 V, 20 ma : : D 9 SM PoE POE13P-24L V, 0.54 A 12 V, 20 ma : : D 8 SM PoE B0695-AL V, 4.5 A 12 V 10 1 : : D 14 SM NSC LM5020 C1023-AL V, 4.5 A 24 V 10 1 : : D 14 SM NSC LM5070 POE300F-33L V, 9 A 19.5 V, 1.5 A : : D 14 SM PoE+ POE300F-50L V, 6 A 24 V, 1.25 A : : D 14 SM PoE+ POE300F-12L V, 2.5 A 3.3 V, 9 A : : D 14 SM PoE+ POE300F-19L V, 1.5 A 5 V, 6 A : : D 14 SM PoE+ POE300F-24L V, 1.25 A 12 V, 2.5 A : : D 14 SM PoE+ Telecom input (36 57 Vdc) C1453-AL V, 1.5 A 10 V : : D 3 SM Texas Instruments PMP717 DA2062-AL V, 2 A 14 V : : E 5 SM Power Integrations DPA423G HA3801-AL V, 3 A 10 V, 20 ma : : F 9 SM TI TPS23753 FA2671-AL V, 3 A : A 7 SM Silicon Labs Si3400 HA3802-AL V, 2 A 10 V, 20 ma : : F 9 SM TI TPS23753 FA2672-AL V, 2 A : A 7 SM Silicon Labs Si3400 HA3803-AL V, 0.83 A 10 V, 20 ma : : F 9 SM TI TPS23753 FA2732-AL V, 0.83 A : A 7 SM Silicon Labs Si3400 GA3271-AL V, 1.0 A 15 V, 20 ma : : D 9 SM Maxim MAX5941B C1495-AL V, 4.0 A 12 V, 20 ma : : D 8 SM NSC LM5070 C1585-AL V, 2.6 A 12 V, 20 ma : : D 8 SM NSC LM5070 C1586-AL V, 1.08 A 12 V, 20 ma : : D 8 SM NSC LM5070 FA2805-CL V, 3 A : A 8 SM Silicon Labs Si3400/3401 FA2924-AL V, 4.5 A : A 8 SM Silicon Labs Si3400/3401 FA2925-AL V, 1.25 A : A 8 SM Silicon Labs Si3400/3401 Telecom extended input (14 60 Vdc) DA2257-AL V, 2 A 10 V, 50 ma : : H 8 SM NSC LM V, 1 A 1 : Telecom extended input (16 32 Vdc) FA2636-AL V, 1 A 7.5 V : : D 8 SM NSC LM5001 Telecom extended input (18 57 Vdc) FA2677-AL V, 7.5 A 11 V, 20 ma : : D 14 SM NSC LM5072 FA2898-AL V, 5 A 11 V, 20 ma : : D 14 SM NSC LM5072 FA2899-AL 25 9 V, 2.8 A 11 V, 20 ma : : D 14 SM NSC LM5072 FA2900-AL V, 2.1 A 11 V, 20 ma : : D 14 SM NSC LM5072 FA2901-AL V, 1.7 A 11 V, 20 ma : : D 14 SM NSC LM5072 A9967-AL V, 2 A 1.25 V : : B 14 SM Linear LT1725 Telecom extended input (18 72 Vdc) C1099-AL V, 2.5 A 14 V : : B 9 SM Maxim MAX5941A C1154-BL V, 2 A 15 V / 5 V : : G 9 SM Maxim MAX5941A 2.5 V, 0.6 A 1 : C1173-AL V, 3 A 10 V / 5.6 V : : F 9 SM TI TPS23750 C1174-AL V, 2 A 10 V / 7.5 V : : F 9 SM TI TPS23750 Telecom extended input (24 60 Vdc) DA2383-AL V, 4 A 10 V, 0.05 A : : D 8 SM NSC LM Vdc input CJ5143-AL V, 0.015A : A 1 SM ON NCP5080 Capacitor Charger 3 24 Vdc input DA2032-AL V, 3 A Pulsed : A 9 SM Linear LTC3750 Capacitor Charger DA2033-AL V, 6 A Pulsed : A 11 SM Linear LTC3750 Capacitor Charger DA2034-AL V, 9 A Pulsed : A 14 SM Linear LTC3750 Capacitor Charger 3.3 Vdc input DA2420-AL V, 0.1 A : A 14 SM ST Micro STE12PS DA2421-AL V, 0.1 A : A 14 SM ST Micro STE12PS 4 6 Vdc input S6057-AL V / 0.9 A : A 15 SM NSC LM258X (T7) S6000-AL V / 0.9 A : A 17 TH NSC LM258X (T7) Q4435-BL V, 1.6 A : A 15 SM NSC LM258X (T1) Q4434-BL V, 1.6 A : A 17 TH NSC LM258X (T1) Q4436-BL V, 0.35 A : B 15 SM NSC LM258X (T2) 12 V, 0.35 A 1 : Q4337-BL V, 0.35 A : B 17 TH NSC LM258X (T2) 12 V, 0.35 A 1 : Please check our website for latest information. Document Revised 09/03/08
3 Document Nominal L at Part Power Aux / bias freq. Turns ratio 0 A DCR (Ohms) Body number (W) Output output (khz) pri : sec pri : aux / bias (µh) pri sec aux / bias Schem size Mtg Designed for Vdc input FA2469-AL V, A : A 4 SM STMicro STLC Vdc input FA2470-AL V, A : A 4 SM STMicro STLC Vdc input IFLY V, 0.17 A : C 10 SM Intersil ISL V, 0.17 A 1 : Vdc input GA3136-BL V, 0.17 A : : D 16 SM TI UCC Vdc input Q4437-BL V, 1.8 A : C 15 SM NSC LM258X (T5) 12 V, 0.25 A 1 : V, 0.25 A 1 : Q4338-BL V, 1.8 A : C 17 TH NSC LM258X (T5) 12 V, 0.25 A 1 : V, 0.25 A 1 : Q4438-BL V, 0.63 A : B 15 SM NSC LM258X (T6) 12 V, 0.63 A 1 : Q4339-BL V, 0.63 A : B 17 TH NSC LM258X (T6) 12 V, 0.63 A 1 : Q4344-BL V, 0.75 A : C 19 TH NSC LM258X (T4) 12 V, 0.75 A 1 : V, 3 A 1 : Q4343-BL V, 1.4 A : B 19 TH NSC LM258X (T3) 12 V, 1.4 A 1 : ac line input ( Vac) A9619-C 7 12 V, 0.58 A : : D 19 TH ON Semi NCP101X ac line input ( Vac) B0570-B V, 1.25 A : : D 19 TH ON Semi NCP101X Universal ac line input ( Vac) Y8844-AL V, 0.54 A : A 12 TH ON Semi NCP1201 DA2077-AL V, 2 A 20 V, 10 ma 65 1 : : D 19 TH ON Semi NCP1027 Y8848-AL V,.83 A : A 19 TH ON Semi NCP1202 GA0007-AL V, 1 A 16 V, 20 ma 45 1 : : I 18 TH ON Semi NCP V, 0.75 A 1 : Z9007-BL V, 4.2 A : A 20 TH ON Semi NCP1200 Z9260-AL V, 4.2 A 15 V, 1.2 A : : D 20 TH ON Semi NCP1200 GA3366-BL V, 4.62 A 16 V, 20 ma : : D 22 TH ON Semi NCP1606 FA2443-AL V, 6.2 A : : D 21 TH TI UCC28600 Schematics A D F H B Drive C E ½ ½ G Gate I Drive 3 Please check our website for latest information. Document Revised 09/03/08
4 Document Dimensions 1 EE , , ,80 6 ER , ,80 10 EFD , ,50 2 ER , , , , ,16 7 EP ,0 11 EFD ,78 3 ER , , , , , , , ,711 4 EP , ,02 8 EP , ,75 12 EF , , , , , , , ,24 5 ER , ,76 9 EFD , , , , ,20 Please check our website for latest information. Document Revised 09/03/08
5 Document Dimensions 13 RM ,5 16 EFD ,0 18 PQ20/ , , , , , , , ,42 14 EFD , , ,00 17 EE , , ,78 19 EE , , , ,13 15 RM , , , , , , ,05 Please check our website for latest information. Document Revised 09/03/08
6 Document Dimensions 21 EE ,10 20 EE , , , , , , , , ,72 22 EER35L , , , ,5 Please check our website for latest information. Document Revised 09/03/08
RoHS. Primary Ind H. Turn Ratio ( + 3%)
* Power from Watts to 0 Watts. * High Frequency. * 00Vrms Minimum Isolation Voltage. * High Operating Temperature Range. ELECTRICAL TEMP RANGESPECIFICATIONS AT O C - OPERATING TEMPERATURE RANGE -0 O C
WEBENCH System Power Architect APEC 2012
WEBENCH System Power Architect APEC 2012 1 Beginning To End: Design And Prototyping 1. Choose a Part 2. Create a Design 3. Analyze a Design 4. Build It! Enter Specifications Custom Prototype Kit Overnight
MAX3804 Evaluation Kit. Evaluates: MAX3804. Features DC-Coupled EV Kit SMA Connectors for All High-Speed Inputs and Outputs Fully Assembled and Tested
19-2821; Rev 1; 2/09 General Description The MAX3804 DC-coupled evaluation kit (EV kit) simplifies evaluation of the MAX3804 12.5Gbps settable equalizer. The EV kit enables full testing of the device functions
DSP Filter System. Author: Nels Pearson Org Date: July 5, 2007 Rev Date: July 6, Doc Number: AIGO-009
DSP Filter System Author: Nels Pearson Org Date: July 5, 2007 Rev Date: July 6, 2007 Doc Number: AIGO-009 2-13 Table of Contents Introduction...3 Overview...3 A2D Input Filter Board...4 Overview...4 Input
SPECIFICATION FOR APPROVAL
PART NO.: XMV-9768-DD611A0-006 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De XuLong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED
TRF-250A. automatic, 3-phase transformer turns ratio finder
TRF-250A automatic, 3-phase transformer turns ratio finder TRF-250A 3-phase transformer turns ratio finder Product Overview The TRF-250A is the battery-powered version of the TRF- 250. Its battery offers
SPECIFICATION FOR APPROVAL
PART NO.: XMG-9771-AE51131-246 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xu Long CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
Bias Flyback Design. The analysis that follows is that of the flyback transformer design required to serve this bias power need.
There is a requirement in this digital DC-DC converter to supply auxiliary power. The dspic requires 3.3V and the gate drivers require 12V. The dspic device must have power supplied to it prior to start-up
1. INTRODUCTION. PSpice with OrCAD Capture (release 16.6 edition)
1. INTRODUCTION SPICE (Simulation Program for Integrated Circuits Emphasis.) is a powerful general purpose analog and mixed-mode circuit simulator that is used to verify circuit designs and to predict
The PCI Series. Precise power control for complex SCR applications. Phase Angle Fired SCR Power Controls AMPS VAC
The PCI Series Phase Angle Fired SCR Power Controls 25-1200 AMPS 120-600 VAC Precise power control for complex SCR applications. ROBICON 1996 Distributed Worldwide by www.mcgoff-bethune.com Applications
Experiment #4: Solid State Diodes Applications III
SCHOOL OF ENGINEERING AND APPLIED SCIENCE DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING ECE 2115: ENGINEERING ELECTRONICS LABORATORY Experiment #4: Solid State Diodes Applications III COMPONENTS Type
The Programmable Mixed Signal Company
The Programmable Mixed Signal Company 1 Table of Contents 1. Introduction 2. Digitally Controlled Potentiometer 3. Advantages of XDCP Calibration of Power Supply 4. Front End 5. Power Mesh 6. Secondary
E101 - Strain Gauge Transducer Display Module. Contents
E101 - Strain Gauge Transducer Display Module Contents Torque Transducer Display Interface: TSE3249R Strain Gauge Transducer Display Interface [E101] Operating Guide: TSE2097V (Includes Introduction, Description
Lite-On Power ChungHo Controlled. Do Not Copy.
Specification Model No: PB-1120-8SA1 Description: 12V 12W single output AC adapter Revision: A Issued Date: Mar. 13, 2013 Customer Part No.: 90, Chien I Rd, Chung Ho city, Taipei Hsien 235, Taiwan Tel:
Line Impedance Stabilization Network (LISN)
Model 3816/2 Line Impedance Stabilization Network (LISN) User Manual ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any
LM5050 High Side OR-ing FET Controller
LM5050 High Side OR-ing FET Controller TI reference design number: PMP20096 Rev A Input: 5V 75V DC DC Test Results Page 1 of 14 Table of Contents Contents 1 Circuit Description... 3 2 Schematic... 3 3
CDN502 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN502 HIGH DENSITY I/O ADAPTER USER GUIDE 13050201 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN502 PRODUCT OVERVIEW 1 DN502 INSTALLATION 1 POWER
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
S IEEE 802.3af/at-Compliant PSE Circuit. Maxim Integrated Products 1
19-5740; Rev 0; 1/11 MAX5971A Evaluation Kit General Description The MAX5971A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet single-port power-sourcing
ENGINEERING SPECIFICATION. 40W AC Adaptor. Part Number: PA W1
Engineering Specification ENGINEERING SPECIFICATION 40W AC Adaptor Part Number: PA-1400-26W1 Approval By: A Anson Hsu 2013.04.29 SHEET 1 of 10 Revision History Engineering Specification REV.X01, 2012.07.24
Series MPM-X12Y 120W PFC MEDICAL POWER ADAPTER
FEATURES 120W medical adapter with active PFC Green power CEC/Energy star group complied Designed to meet medical standard type BF rated Conductive EMI meets CISPR/FCC class B Wall mount mechanical construction
+Denotes lead(pb)-free and RoHS compliant. FOUTL-, FOUTL+, FOU TR-, FO U TR+, V D D, P G N D
19-4071; Rev 1; 9/09 MAX9736A Evaluation Kit General Description The MAX9736A evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that configures the MAX9736A Class D amplifier
DIGITAL PANEL METERS
DIGITAL PANEL METERS 3 1/2 digit,4 1/2 digit - A/C D/C Voltage/Current 3 1/2 digit4 1/2 digit- AC/DCVoltage/Current-TRMS DPM U AC/DC VOLTAGE / CURRENT 3 1/2 DIGIT - MODEL : PE 3000 4 1/2 DIGIT - MODEL
Mid-span 802.3af PoE Injector. Installation Guide KPOE-100
Mid-span 802.3af PoE Injector Installation Guide KPOE-100 Doc. 070521 1 (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used
February 2003 PMP EVMs SLVU081
User s Guide February 2003 PMP EVMs SLVU081 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and
ECE 480 Design Team 3 Proposal. Power-over-Ethernet for Wireless Home Automation Sponsored by Texas Instruments
ECE 480 Design Team 3 Proposal Power-over-Ethernet for Wireless Home Automation Sponsored by Texas Instruments David DeLuca Kang Hu Lee Sasang Balachandran Hassan Abdullahi Raghava Karthik Hemmanur Dr.
CompletePower Drives
CompletePower Drives Simply what you need. No more, no less! For over 60 years, ElectroCraft has been helping engineers translate innovative ideas into reality one reliable motor at a time. As a global
Design Considerations for USB type C Power Delivery Brian King
Design Considerations for USB type C Power Delivery Brian King 1 What will I get out of this session? Purpose: 1. Learn more about USB C Power Delivery (PD) requirements. 2. Understand architecture of
NCP107X, 12 Vout, Off-line Buck Regulator
Design Note DN05058/D NCP107X, 12 Vout, Off-line Buck Regulator Device Application Input Voltage Output Power Topology I/O Isolation NCP1071 NCP1075 NCP1077 Smart Meters Electric Meters, White Goods 85
SILICON DESIGNS, INC Model 1210 ANALOG ACCELEROMETER
SILICON DESIGNS, INC Model 1210 ANALOG ACCELEROMETER SENSOR TYPE: Capacitive Micromachined Nitrogen Damped Hermetically Sealed ±4V Differential Output or 0.5V to 4.5V Single Ended Output Fully Calibrated
DIGITAL AUDIO DELAY MODULE (DADM) INSTRUCTIONS
DIGITAL AUDIO DELAY MODULE (DADM) INSTRUCTIONS Thank you for purchasing the ICS Digital Audio Delay Module! PRODUCT DESCRIPTION The Digital Audio Delay Module (DADM) is an enhanced replacement for the
PoE Ethernet Switches Commercial Grade
PoE Ethernet Switches Commercial Grade Featured Products EX17008A / EX17008 / 8-port 10/100BASE-TX PoE Ethernet Switch EX17908A / EX17908 / 8-port Gigabit PoE (IEEE802.3at) Ethernet Switch EX17016A / EX17016
Reference Design. 50-W Push-Pull Converter Reference Design Using the UCC38085 (PR100B) Reference Design
Reference Design 50-W Push-Pull Converter Reference Design Using the UCC38085 (PR100B) Reference Design 1 50-W Push-Pull Converter Reference Design Using the UCC38085 (PR100B) John Bottrill System Power
Power LED Driver. By Dushan Grujich, on February 14 th. 2014
Power LED Driver By Dushan Grujich, on February 14 th. 2014 Most often microscope enthusiasts encounter a problem when converting their microscope illuminator from incandescent lamp to a power LED. Problem
+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
GM/2 Dual Gain Manager Operation Manual
GM/2 Dual Ga Manager Operation Manual Biamp Systems, 14130 N.W. Science Park, Portland, Oregon 97229 U.S.A. (503) 641-7287 an affiliate of Rauland-Borg Corp. GM/2 # $ # % # & # ' # ()* # +. /0 012$ 3 4.3
10/100BASE-T SINGLE PORT, SMT TRANSFORMER
Meets IEEE802.3 and ANSI X3.263 standards, including 350 µh OCL with 8 ma DC bias Pin-compatible to Pulse Gigabit Ethernet part numbers H5004 and H5007 Part Number Electrical Specifications @ 25 C Operating
D115 The Fast Optimal Servo Amplifier For Brush, Brushless, Voice Coil Servo Motors
D115 The Fast Optimal Servo Amplifier For Brush, Brushless, Voice Coil Servo Motors Ron Boe 5/15/2014 This user guide details the servo drives capabilities and physical interfaces. Users will be able to
Introduction to USB Type-C & Power Delivery
Introduction to USB Type-C & Power Delivery Focus on Charging Applications Deric Waters, System Engineer Agenda Introduction to USB Type-C and Power Delivery Detailed discussion of a USB Type-C universal
Homework 6: Printed Circuit Board Layout Design Narrative Due: Friday, February 27, at NOON
Homework 6: Printed Circuit Board Layout Design Narrative Due: Friday, February 27, at NOON Team Code Name: _Magic Wand Group No. 5 Team Member Completing This Homework: Michelle Zhang E-mail Address of
CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE 13050301 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN503 PRODUCT OVERVIEW 1 DN503 INSTALLATION 1 POWER
BG1B Universal Gate Drive Prototype Board
BG1B Universal Gate Drive Prototype Board Description: The BG1B is a single channel gate drive circuit board for high power IGBT modules. The BG1B utilizes Powerex hybrid gate drivers and DC-to-DC converters
MAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
Typical Input current at 1.15A 0.65A 60 Watt 24VDC / 2.5A. 1.84A 1.0A 120 Watt 24VDC / 5.0A
SmartPower TM The Autotech SmartPower is a DC switching power supply with 24V output Voltage. This user friendly power supply has two 7-segment LED displays for voltage and current monitoring. This DC
SERVICE SPECIFICATION SU-4586
SERVCE SPECFCATON SU-4586 STYLE F-70 NVERTER- DRVER UN45l034-6801 1 General This service specification covers the testing and maintenance procedures for the Style F-70 nverter-driver The F-70 supplies
UG352: Si5391A-A Evaluation Board User's Guide
UG352: Si5391A-A Evaluation Board User's Guide The Si5391A-A-EVB is used for evaluating the Si5391A Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier revision D. The device revision is distinguished
BG2D Solderless Connection Gate Drive Prototype Board
Application NOTES: First Release: May, 2008 BG2D Solderless Connection Gate Drive Prototype Board Description: The BG2D is a two channel gate drive circuit for that the dual NX series modules pins plug
ENGINEERING SPECIFICATION. 65W AC Adaptor. Part Number: PA P1
ENGINEERING SPECIFICATION 65W AC Adaptor Part Number: PA-1650-90P1 EFFECTIVE DATE: May 28, 2013 Customer Rev. Written By Approval By LITE-ON Technology Corp. PEGETRON X01 William Hsu SHEET 1 of 9 Revision
Development Board EPC9118 Quick Start Guide
Development Board EPC9118 Quick Start Guide EPC2001C/EPC2021 48 V Buck Converter Revision 1.0 DESCRIPTION The EPC9118 demonstration board is a 5 V output, 400 khz buck converter with a 20 A maximum output
IELR Series
IELR Series Rail-Mount Magnetic Circuit Protectors Introduction Poles Specifications Operating Characteristics Delay Curves Approvals Decision Tables 6 62 63 64 65 69 70 IELR Series Rail-Mount Hydraulic
Table of Contents. 1 General 1.1 Scope
Table of Contents 1 General 1.1 Scope 2 Input Characteristics 2.1 Input Voltage 2.2 Input Frequency 2.3 Max. Input AC Current 2.4 Inrush Current 2.5 Efficiency 3 Output characteristics 3.1 Nominal Operation
Daikin McQuay. Centrifugal Chiller LiquiFlo 2.0 Water-Cooled VFD VF2037, VF2055, VF2080, VF2110
Replacement Parts List No. 70002300 Revision B 08/204 Daikin McQuay Centrifugal Chiller LiquiFlo 2.0 Water-Cooled VFD VF2037, VF2055, VF2080, VF20 To find your Daikin Applied parts distributor, call -800-377-2787
IELR Rail-Mount Series Magnetic Circuit Protectors
IELR Rail-Mount IELR Rail-Mount Series Magnetic Circuit Protectors Introduction 92 Single Pole 93 Specifications 94 Operating Characteristics 95 Delay Curves 96 Approvals & Decision Tables 200 IELR Series
PhlatLight LED Development Kit Manual
PhlatLight LED Development Kit Manual DK-105T-1 Introduction: PhlatLight LEDs, from Luminus Devices, have been designed from the ground up to enable a new class of illumination and projection systems.
S Complete 2:1 VGA Multiplexer S VGA Connections and Power S LED Indicators for Switch Connections S VGA Inputs/Outputs S Fully Assembled and Tested
19-5030; Rev 0; 10/09 MAX4885AE Evaluation Kit General Description The MAX4885AE evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX4885AE VGA 2:1 multiplexer.
Tri-Phase. true 3-phase transformer turns ratio tester
Tri-Phase true 3-phase transformer turns ratio tester Tri-Phase true 3-phase transformer turns ratio tester Product Overview The Tri-Phase can be used as a stand-alone unit or can be computer-controlled.
The PUMPKIN LIGHT LED
The PUMPKIN LIGHT LED PUMPKIN LIGHT LED By Mark McCuller Email: mcculler@mail.com DESIGN SUMMARY The PUMPKIN LIGHT LED By: Mark McCuller The Pumpkin Light LED is a battery-powered device that illuminates
INSTRUCTION MANUAL. Dual-System Signal Interface
INSTRUCTION MANUAL Model 604B Dual-System Signal Interface February 17, 2008, Revision 3 Copyright 2004-2008 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora, Ontario,
Maxim Integrated Products 1
19-2881; Rev 0; 6/03 General Description The MAX1543 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that provides the voltages and features required for active-matrix,
Maxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
Bel Power Solutions AC Power Distribution Unit (PDU) is used to distribute AC voltage in IT Racks following the Open Rack specification.
Bel Power Solutions AC Power Distribution Unit (PDU) is used to distribute AC voltage in IT Racks following the Open Rack specification. This device is installed in an IT chassis and works in conjunction
Introduction. Chapter 2
The Vantage PRO unit (Figure 2-1) combines a digital and graphing multimeter, lab scope and ignition scope with a powerful diagnostic database. Figure 2-1 Vantage PRO This diagnostic database gives you
Displays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
IS31LT3935 Bulb Lighting Evaluation Board Guide. Description. Features. Applications. Quick Start. Ordering Information. or call
Description The Flicker-Free TM IS31LT3935 is a single stage current mode LED driver optimized for high power factor and compatibility with all TRIAC dimmers. The PFC architecture enables excellent power
FUSERBLOC LMDC Fuse combination switches FUSERBLOC Live Maintenance DC
Fuse protection The solution for > Live maintenance of speed drives supplied by a common DC bus > Live maintenance of PV inverters connected in parallel on a same circuit fuser-lm_2_a Strong points > Compact
metrum PQ 110 Power Quality Unit, Class A Normative reference instrument for MV substation monitoring
metrum PQ 110 Power Quality Unit, Class A Normative reference instrument for MV substation monitoring Background The Metrum PQ instrument range are specially designed for normative measurements in the
PMC-16AIO 16-Bit Analog Input/Output PMC Board With 32 Input Channels, 4 Output Channels and 16-Bit Digital I/O Port
PMC-16AIO 16-Bit Analog Input/Output PMC Board With 32 Input Channels, 4 Output Channels and 16-Bit Digital I/O Port Features Include: 32 Single-Ended or 16 Differential 16-Bit Scanned Analog Input Channels
QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 824 MULTIDISPLAY LED CONTROLLER
LTC3208 WARNING: The LEDs on this demo board produce very bright light. Do not look directly at LEDs when power is applied. Serious eye damage may occur. DESCRIPTION Demonstration circuit 824 is a multi-display
Features. General Description. Component List
MAX5988A Evaluation Kit Evaluates: MAX5988A General Description The MAX5988A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S114 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 S114D S114DD DESCRIPTION RELAY TYPE DPDT basic relay DPDT relay with internal
Design Note DN05038/D Non-Isolated, 8 Watt Dual Output, Off-line Power Supply
Design Note DN05038/D Non-Isolated, 8 Watt Dual Output, Off-line Power Supply Device Application Input Voltage Output Power Topology I/O Isolation NCP075 White Goods, Non-Isolated No isolation from 80
PQ-Box 100, 150, 200 & 300 Power Quality Analyser Clamps & Accessories
Mini Clamps: Part Number 111.7015 PQ-Box 100, 150, 200 & 300 Power Quality Analyser Clamps & Accessories Description 10 ma-to-20 A or 100 ma-to-200 A. Switchable range mini clamp. 40 Hz 20 khz 4 x mini
Copyright 2014, R. Eckweiler & OCARC, Inc. Page 1 of 6
HOM rev. new Heathkit of the Month: by Bob Eckweiler, AF6C Heathkit of the Month #52 - SK-211 AC Monitor Heathkit SK-211 AC Monitor Introduction: When club president, Nicholas - AF6CF, mentioned he had
OPERATOR S MANUAL MODEL LS110 MINI-PBX SIMULATOR
1 OPERATOR S MANUAL MODEL LS110 MINI-PBX SIMULATOR Micro Seven, Inc. 1095-K N.E. 25 th Hillsboro, OR 97124 U.S.A. phone: 503-693-6982 fax: 503-693-9742, email to: sales@microseveninc.com www.microseveninc.com
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT
Series S134 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES S134 S134D S134DD RELAY TYPE DPDT basic relay DPDT relay with internal diode
Fast and Reliable Production Flash and Gang Programmers for MCUs
Fast and Reliable Production Flash and Gang Programmers for MCUs 2 Programmer Selection Programmers for ARM MCUs from Multiple Vendors: FlashPro-ARM, GangPro-ARM Texas Instruments ST Microelectronics Silicon
Ihr autorisierter Distributor: Neumüller Elektronik GmbH
IELR Series Rail-Mount Magnetic Circuit Protectors Introduction Poles Specifications Operating Characteristics Delay Curves Approvals Decision Tables 6 62 63 64 65 69 70 Neumüller Elektronik GmbH Gewerbegebiet
Exercise 1: Introduction to Digital Circuits EE214 Fall 2014
Exercise 1: Introduction to Digital Circuits EE214 Fall 2014 I am submitting my own work in this exercise, and I am aware of the penalties for cheating that will be assessed if I submit work for credit
product catalog Telecom / Network Datacom Medical Commercial / Industrial Powering Technology
product catalog 2012 Telecom / Network Datacom Commercial / Industrial Medical High Voltage Military / C.O.T.S. For Support call: North America: 954-346-2442 x1071 Europe: +44(0) 1903 768 200 www.unipowerco.com
Transducers for Pt-100/1000, Resistors
Transducers for Pt-100/1000, Resistors Microprocessor-based technology General Description Isolating transducers with digital programming of ranges, for DIN-rails or for printed circuit boards. Modules
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
SPECIFICATION. SFX Form Factor. SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input. SFX Form Factor
SPECIFICATION SFX Form Factor SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input.GENERAL DESCRIPTION AND SCOPE This is the specification of Model SST-ST45SF; AC-line powered switching
VCL-TP, Teleprotection Equipment
VCL-TP, Teleprotection Equipment Data Sheet Copyright: Valiant Communications Limited. - 2013 1 Product Overview VCL-TP, Teleprotection Equipment is an extremely reliable and flexible product that offers
Electronic Devices. Special Purpose Diodes. Chapter Three. Dr. Hisham Alrawashdeh
Electronic Devices Chapter Three Special Purpose Diodes Dr. Hisham Alrawashdeh Chapter Three Special Purpose Diodes Introduction Chapter 2 was devoted to general-purpose and rectifier diodes, which are
Orientation F7 Drive Software Technical Manual
Software Number: VSF11006X, Drive Models: CIMR-F7UXXXXXX-063 Document Number: TM.F7SW.063, Date: 03/03/06, Rev: 06-03 Orientation F7 Drive Software Technical Manual This document is intended to provide
Micro Instruments price list All pricing excludes 15%
Micro Instruments price list All pricing excludes VAT @ 15% - 2019 Product Description Solar Smart R1 Solar MPPT regulator 12/24V - 20Amp with R2 799.00 5 Way Relay board R360.00 Ethernet + SNMP support
SPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
Slick Line Acquisition System Manual
SCIENTIFIC DATA SYSTEMS, INC. SLICK LINE ACQUISITION BOX Slick Line Acquisition System Manual This document contains proprietary information. Copyright 2005 Scientific Data Systems, Inc. All rights reserved.
PRODUCT OVERVIEW CPM2A
PRODUCT OVERVIEW CPM2A Micro Controller CPU and Expansion Modules The CPM2A series micro controllers are among some of the most powerful small-scale control solutions in the micro PLC industry today. With
AZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
IRM-5000P. insulation resistance meter. Vanguard Instruments Company, Inc.
IRM-5000P insulation resistance meter Vanguard Instruments Company, Inc. www.vanguard-instruments.com IRM-5000P insulation resistance meter The IRM-5000P is a microprocessor-based, high-voltage, insulation-test
RELIABILITY REPORT FOR. MAX4040Exx PLASTIC ENCAPSULATED DEVICES. June 8, 2001 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086
MAX4040 Rev. B RELIABILITY REPORT FOR MAX4040Exx PLASTIC ENCAPSULATED DEVICES June 8, 2001 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Written by Reviewed by Jim Pedicord Quality
45W TYPE-C PD2.0 Power Adapter Solution
Design Note DN05100/D 45W TYPE-C PD2.0 Power Adapter Solution Device Application Input Voltage Output Power Topology I/O Isolation NCP1340B3 NCP43080D NTMFS6B03 ATP104 Smart phone, PAD and NB adapter supporting
Lab 1: Analysis of DC and AC circuits using PSPICE
Lab 1: Analysis of DC and AC circuits using PSPICE 1. Objectives. 1) Familiarize yourself with PSPICE simulation software environment. 2) Obtain confidence in performing DC and AC circuit simulation. 2.
VCL-TP, Teleprotection Equipment With Trip Counter Display Panel
VCL-TP, Teleprotection Equipment With Trip Counter Display Panel Data Sheet Copyright: Valiant Communications Limited. 2008-2014 1 Product Overview VCL-TP, Teleprotection Equipment is an extremely reliable
Instruction Manual ITC-79-FTF 0-10 VDC. Thresholds: ON: TP1=3V OFF: TP2=1V ON: TP1= OFF: TP2= 100 microsec. Not Installed.
Manufacturers of Process Controls and Instrumentation Instruction Manual Model: ITC-79-FTF Function: Frequency to Frequency Isolator Option: Input: -DIV (Frequency Divider) -BUF (Frequency/Pulse Buffer)
Preliminary Product Overview
Preliminary Product Overview Features 1.0 A per channel / 3.0 A Total Current Maximum Voltage (AC or DC): +150 V Low On-State Resistance < 1.0 Ω 10 GΩ Input to Output Isolation < 10us Switching Time High
Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
BG2E Universal Gate Drive Prototype Board
Application NOTES: First Release: March 23, 200 BG2E Universal Gate Drive Prototype Board Description: BG2E is a fully isolated two channel gate drive circuit designed for use with dual NX-L series IGBT