Hardware Supported by XProtect Basis and Basis+

Transcription

1 Hardware by XProtect Basis and Basis+ XProtect Basis and Basis+ offer compatibility with IP devices from the world's leading manufacturers, with the list growing all the time. Below is the list of devices and firmware versions supported by the latest version of XProtect Basis and Basis+. Please note that the use of preset positions is not supported Basis, in Basis+ up to 25 preset positions are supported. Also note that audio is not supported in Basis, in Basis+ there is support for one audio channel. The latest released XProtect Basis has Driver packver. 2. installed. The latest released XProtect Basis+ has Driver packver. 2.5 installed. s and firmware versions in bold are new in 2.5 compared to release 2.. s and firmware versions in green bold are new in 2.8 compared to 2.5. ACTI s: ACD200 V /0 ACM00 V /0 ACM30 V /0 ACM430 V /0 ACM300 V /0

2 Milestone The Open Platform IP Software Stránka č. 2 z 20 ACM320 V /0 ACM3300 V /0 500H V V /0 CAM CAM 500M V V /0 CAM500S V V /0 CAM520 V V /0 CAM530 V /0 CAM540 V /0 CAM550 V /0 CAM5200 V V /0 CAM5220 V V /0 CAM5300 V V /0 CAM5320 V V /0 CAM5500 V V /0 CAM5520 V V /0 CAM600 V V /0 Yes 2 CAM60 V V /0 Yes 2 CAM620 V V /0 Yes 2 CAM6200 V.03.06, V.04.0 V /0 Yes 2

3 Milestone The Open Platform IP Software Stránka č. 3 z 20 CAM620 V V.04.0 V /0 Yes 2 CAM6220 V V.04.0 V /0 Yes 2 CAM6230 V V.04.0 V /0 Yes 2 CAM6500 V /0 Yes 2 CAM650 V /0 Yes 2 CAM6520 V /0 Yes 2 CAM6600 V /0 Yes 2 CAM660 V /0 Yes 2 CAM6620 V /0 Yes 2 CAM700 V V /0 CAM7200 V /0 CAM7300 V /0 SED200R V V.04.7 V /0 Yes 2 SED200S V V.04.7 V /0 Yes 2 SED220 V V /0 Yes 2 SED230 V V /0 Yes 2 SED240 V V /0 Yes 2 SED2200 V /0 Yes 2 SED 2300Q V V /0

4 Milestone The Open Platform IP Software p Stránka č. 4 z Q V V /0 V V /0 SED2400 V V /0 SED240 V /0 SED2420 V /0 SED2600 V /0 Only one channel or quad view channel can be monitoredat the same time Only support for relative positioning analog camerausing Pelcop protocol. Advantec s: ADAM /6 ADAM /6 This device require a License Key, as all other devices. Using these devices requires Basis+ version 4.0i or newer. Basis+ supports input not output. Agilemesh s: 00 SED SED 2320Q NO 2.3.b.4MM 0/0 Appro s: LC /0 LC /0

5 Milestone The Open Platform IP Software Stránka č. 5 z 20 Arecont s: AV /0 AV /0 AV /0 AV /0 AV /0 AV880 x /0 AV8360 x /0 x Camera will require one camera license for each video channel. AXIS s: / , / , /0 206M 4.0, , /0 206W 4.0, / / 207MW 4.40 / Yes # 207W 4.33, 4.40 / Yes # , , 4.20, 4.30 * /

6 Milestone The Open Platform IP Software p Stránka č. 6 z 20 20A 4.30 / Yes , , 4.30 * / 2A 4.3, 4.30 * / Yes 22 4,34 / Yes Yes , , 4.30 * 2/3 Yes Yes / Yes Yes , / Yes , 4.20, 4.30 * 2/ 223M 4.40 * 2/ Yes 225FD 4.3 2/ 23D 4.02, 4.20, 4.30 * 4/4 Yes 23D /4 Yes 232D 4.02, * 4/4 Yes 232D /4 Yes /0 Yes 240Q 4.20, /4 Yes 24Q 4.20, /4 Yes 24QA 4.20, /4 Yes Yes 4.0, 4.02

7 Milestone The Open Platform IP Software Stránka č. 7 z 20 24S 4.03, * 4/4 Yes 24SA 4.2, /4 Yes Yes 243SA /4 Yes Yes /2 Yes , , / Yes , , / Yes , , / Yes , , /0 Yes 2400 Osys.2,.5 4 4/ Yes 2400 Linux 2.32, / Yes Yes , / Yes 3.0, 3. Yes Osys.0,.5 4/ Yes 240 Linux 2.32, / Yes Yes , / Yes 3.0, 3. Yes , / , /0 Yes , , / Yes Yes + * supportrequire firmware version 4.20 or higher. + via Axis 29 Module.

8 Milestone The Open Platform IP Software Stránka č. 8 z 20 Resolutions 76x2/76x44 not supported. 2 Resolutions 76x2/76x44 and 704x204/704x288 not supported. # support requires firmware version 4.40 or higher. Baxall s: XStream /4 Yes Destiny /0 Yes 2 Yes 3 Driver must be requested separately from Milestone BOSCH s: Dinion NWC04550P # 0/0 Dinion NWC04950P # 0/0 Jet / 5 * VIP / VIP X # 4/ Yes 2 VIP X # 4/ Yes 2 *Only one inputcan be defined and used, including Motion alarm and loss alarm. Outputs can only be used to change view. # has only support for QCIF and CIF resolutions. Canon s: VBC0.0 rev. 5 0/0 Yes

9 Milestone The Open Platform IP Software Stránka č. 9 z 20 VBC50.0 rev. 2 0/0 Yes Convision s: S 4.3.3, /0 Yes V , /0 Yes V , /0 Yes V / 2 Yes V / 2 Yes DLink s: DCS000/ DCS000W.27,.30 0/0 DCS /0 DCS200+ / 200/200G.06 0/0 DCS G.02 0/0 DCS5300 series.02,.03 0/0 Yes 2 DCS5300G.02, /0 Yes 2 DCS G.0 0/0 Yes 2 Flir Systems s:

10 Milestone The Open Platform IP Software Stránka č. 0 z FLIR on Axis 24S 4.0, 4.03, /4 Infinova s: Infinova V700NC NetDome 2.0 0/0 Yes 2 Infinova V700NL NetDome.5 0/0 Yes 2 Intellinet s: MNCL0 4. 0/ IPIX s: IS 2000, CVD 2000, CVN 2000 R70 hw. 0/0 CVD 3000 R3294 hw. 0/0 IQinvision s: IQEye 0 2.4/2 /0 IQEye3 series 4.8.2, B2.2/2, 2.4/, 2.4/2, 2.6/2 /0 IQEye /2, 2.5/5, 2.6/2 /0

11 Milestone The Open Platform IP Software p Stránka č. z 20 IQEye6 series 4 v2.3/, 2.4/, 2.4/2, 2.6/2 /0 IQEye7 series B2.6/4 2.6/2 /0 4 Only authentication mode = 'Basic'is supported JVC s: VN AU 3.0 0/0 Yes VN C0U.3, 2.0 0/0 C20U.0,.3 0/0 C30U.3, 3.2, 4.0 0/0 Yes C3WU.3, 3.2 0/0 Yes VNC25.02, /0 VNC625U.02, /0 Yes VNC655U 2.00, /0 Yes VNE4 /E4E/ E4U.0E, /0 Linudix s: LWS / Lumenera s: LE65.,.6 0/0 LE75.,.6 0/0

12 Milestone The Open Platform IP Software Stránka č. 2 z 20 LE275.,.6 0/0 LE375.,.6 0/0 Mobotix s: MM M V /0 M0/D0 M0 V V /0 M0M M0 V V /0 M2/D2 MX V V /0 M22M MX V V /0 Panasonic s: BLC.30 0/0 BLC0.3,.20,.22,.25 0/0 Yes 2 BLC20 #.30 0/0 BLC30.,.20,.24R0,.30 0/0 Yes 2 BBHCE , 2.0 2/ Yes 2 BBHCM3.02,.08,.25,.30 2/ Yes 2 BBHCM33.04,.0,.25,.30 2/ Yes 2.05,.0,

13 Milestone The Open Platform IP Software Stránka č. 3 z BBHCM37A.25,.30 2/ Yes 2 BBHCM38.05,.0,.25,.30 2/ Yes 2 KXHCM8 #.62,.76,.80, 83 2/ KXHCM0.62,.76,.80, 83 2/ Yes 2 KXHCM0A #.23,.25,.30 2/ Yes 2 KXHCM230.62,.76,.80,.83 2/ Yes 2 KXHCM250 #.62,.76,.80,.83 2/ Yes 2 KXHCM270 #.62,.76,.80,.83 2/ Yes 2 KXHCM280 (except 280A).62,.76,.80,.83 2/ Yes 2 KXHCM280A #.09, 30 / Yes 2 NP 240/244.06, 22E2 / NP /E / NP 000/004.06E0, 2E0 / NS P7,.0PB / Yes NS 320.5E, 20E / Yes 2 NT 04.00G of 4 0/0 Yes NW E / # Tested by Camera manufacturer. Philips s: NETSRV.2.7 /0

14 Milestone The Open Platform IP Software Stránka č. 4 z NETSVR /0 Pixord s: , , / / , , , / , / , , , / / 24x 2.6, , , 2.42, / , , /0 Yes 2 400/400W 2., 2.2 0/0 46 V2. / Yes V2. / Yes , , , / Yes 2 40/40W 2., 2.2 0/0 Yes , , , / Yes , , , / Yes 2

15 Milestone The Open Platform IP Software Stránka č. 5 z Polar Industries s: zpan00 V.04.0NB 0/0 Yes # 2 # up/down arrows changes views and left/right arrows pans the views. Samsung s: SCCC (0809) 0/0 Yes 2 SNT00 i.3 0/0 Yes 2 Sanyo s: WB2000 / WB ,.43M.44,.45,.46 0/0 DP9585P M /0 Yes 2 VSPSV ,.43M.44,.45, /0 Sony s: SNCCS3 0.5 /2 SNCCS0.0 /2 SNCCS.0 /2 Yes SNCCS50N #.02 2/2 SNCDF40.00,. /2 Yes

16 Milestone The Open Platform IP Software Stránka č. 6 z SNCDF70.0,. /2 Yes SNCM / SNCMW.0 0/0 SNCM3 / SNCM3W.0 0/0 Yes SNCP.0,.03.,.22 / Yes SNCP5.00,.22 0/ Yes Yes SNCRX550.02, /2 Yes Yes SNCRZ25.02,..22 2/2 Yes Yes SNCRZ , a, /2 Yes SNCRZ30/ /2 Yes SNCRZ /2 Yes Yes SNCVL0P.4.0 /2 SNCZ20.00,.2 /2 Yes SNTV , /0 Yes SNTV50 /2 SNTV704.24, /4 Yes 2 # SNCCS50P is supported in our Beta device package The framerate must be set to "fastest", on the devices own website for the SNTV704 device. Toshiba s: IKWB0A , /0 Yes 2

17 Milestone The Open Platform IP Software Stránka č. 7 z IKWB02A A 0/0 IKWBA , , /0 Yes 2 IKWB5A /0 Yes 2 IKWB2A.00.E.0 0/0 Yes 2 IKWR0A /0 5 Ceiling mount is not supported. Vantage s: VIPS220 # 0/0 VIPS230 # 0/0 VIPS240 # 0/0 VIPC5300 # 0/0 VIPC5320 # 0/0 VIPC700 # 0/0 VIPC7200 # 0/0 V NB V NB V NB V NB V NB V NB V NB VIPC7300 # V NB 0/0 # Tested by Camera Manufacturer Veo s:

18 Milestone The Open Platform IP Software Stránka č. 8 z Veo XT * /0 Yes * Only usable within a local network segment, cannot be routed through network routers. Verint s: S700e 4.00m, 4.22d 0/0 Yes # 2 Yes S704e 4.22b 4 0/0 Yes #, 2 S708e 4.20f, 4.22b 8 0/0 Yes #, 2 S900e 4.40j 0/0 Yes # 2 Yes S950e 4.62d 0/0 Yes # 2 Yes S970e 4.62d 0/0 Yes # 2 Yes S2700e 4.40i 0/0 # support for PelcoD, PelcoP and JVC TKC655 Dome camera Address ID for Multidrop must be set to the same value as the camera number on the Server Vivotek s: FD b 0/0 IP22 020c 0/0 IP e 0/0 IP32 020b 0/0 IP d 0203a 0/0 IP f 000g 0/0 IP624 00e 0/0 IP735 r 0202b 0/0 IP737 r 0202b 0/0

19 Milestone The Open Platform IP Software Stránka č. 9 z PT b 0/0 Yes 2 PT735 r 020b 0/0 Yes 2 PT737 r 020b 0/0 Yes 2 PZ622 00d 002j 0/0 Yes 2 SD622V 000h 0/0 Yes 2 VS20 020d 0/0 VS ,0202b 0204e, 3.0b 4 0/0 Yes 2 VS p 4 0/0 VS c 0/0 VS b 020c 0/0 Yes 2 for the full Vivotek 3xx series &Vivotek 6xxseries is implemented, but it has onlybeen tested at Milestone with the devices listed above. Webgate s: WebEye E0.2.0,.2.3 2/0 XView s: AP / * Preset s: : : Pan/Tilt/Zoom () Preset Positions can be defined in the software, this requires the camera to be of the socalled "absolute positioning" kind (as opposed to "relative positioning"). If the camera is not of the absolute positioning kind the Preset

20 Milestone The Open Platform IP Software Stránka č. 20 z Positions will NOT be available. Please consult the video server manufacturer for more information. 2: Pan/Tilt/Zoom () Preset Positions can be defined in video server controlling the camera. The software can utilize these Preset Positions. In this way Preset Positions may also be supported for cameras of the "relative positioning" kind. Please consult the video server manufacturer for more information. : For this video server the software supports both ways of handling Preset Positions.