Release Notes. Digital Sentry IP Camera Compatibility

Transcription

1 C1024RN-A (8/10) Page 1 of 31 Release Notes Digital Sentry Compatibility Digital Sentry digital video management systems (DVMS) support certain IP camera and encoder models. The models listed in this document can be used with Digital Sentry IP camera driver version and later. Refer to each table for information about the hardware and software features validated for use on a Digital Sentry system. General limitations, special instructions, and model-specific information may be listed at the beginning of each table. For information about the general usage of each camera or encoder, refer to the manufacturer s documentation. For additional information on Digital Sentry (including a list of compatible cameras, related documentation, product specifications, software downloads, and so forth), visit the Pelco Web site at For technical issues, contact Pelco Product Support at (USA and Canada) or (international).

2 ACTi IP Cameras General Camera Notes Frame rate and quality settings are based on bit rate and might not exactly match the settings entered in DS Admin. When security is enabled on these cameras, the DS Admin username and password credentials are used by the IP driver for authentication. ACTi (1 of 2) ACD-2300 (Video Server) A8D-R2N-V AC Resolutions Full D1 720 x 480 (NTSC), 720 x 576 (PAL) VGA 640 x x 240 CIF (NTSC), 352 x 288 (PAL) QCIF 160 x 2112 (NTSC), 176 x 144 (PAL Frame Rate 30 (NTSC) 25 (PAL) 1 to 100 ACM-1101 A1D-220-v AC 640 x 480, 352 x to 30 Server-Based 1 to 100 ACM-3311N A1D-220-V AC Full D1 720 x 480 (NTSC), 720 x 576 (PAL) VGA 640 X x 240 CIF (NTSC), 352 x 288 (PAL) QCIF 160 x 112 (NTSC), 176 x 144 (PAL) 30 (NTSC) 25 (PAL) 1 to 100 Page 2 of 31 C1024RN-A (8/10)

3 C1024RN-A (8/10) Page 3 of 31 ACTi (2 of 2) ACM-4001 A1D-220-V AC VGA 640 x QVGA 320 x QQVGA 160 x SXGA 1280 x to 100 HD x ACM-5601 A1D-220-v AC VGA 640 x Server-Based QVGA 320 x QQVGA 160 x CAM-5301 AID-M2N-v AC 720 x 480, 352 x 240, 160 x to 30 Server-Based 1 to 100 CAM-6620 A1D-M2N-V AC SED-2120 SED-2420 SED-2610 Resolutions Full D1 CIF QCIF 720 x 480 (NTSC), 720 x 576 (PAL) 352 x 240 (NTSC), 352 x 288 (PAL) 160 x 112 (NTSC), 176 x 144 (PAL) Frame Rate 30 (NTSC) 25 (PAL) 1 to 100 Yes (Pelco D protocol) A2D-P2N-v AC 720 x 480, 352 x 240, 160 x to 30 Server-Based 1 to 100 SXGA 1280 x TCM-4301 A1D-310-V AC, HD x VGA 640 x QVGA 320 x to 100 QQVGA 160 x

4 Arecont Vision s General Camera Notes Frame rates are rounded up to the next valid value listed in the tables. For example, if the requested frame rate is 7.5 frames per second (fps), the camera provides 8 fps. The frame rate requested might not match specifications in the camera manufacturer s documentation. Camera resolutions configured in DS Admin must match resolutions supported in this document. Always stop the Digital Sentry VideoServer service before running the Arecont Vision AV Manager application. After AV Manager configuration is complete, change the AV Manager server startup type to Disabled (LMSrv), and then restart the VideoServer service. Digital Sentry cannot function properly while any Arecont Vision application is active on the same system. Check the system tray to verify that Arecont Vision applications are not active. Using Integral motion detection decreases Digital Sentry performance because of increased CPU usage, especially at higher resolutions. Pelco recommends that in-camera motion detection be used at higher resolutions. Frame rates could be reduced as resolution and quality settings are increased. Arecont Vision IP cameras cannot be dual-homed (that is, they cannot be streamed to two Digital Sentry systems or applications simultaneously). To provide a stable camera environment, make sure local or Power over Ethernet (PoE) power meets or exceeds the requirement of the camera used. For optimal performance, do not use the Digital Sentry client software on the Digital Sentry system to view video from Arecont Vision cameras, except for configuration purposes. Some servers do not meet the minimum requirements to run the client software in this manner. A single Arecont Vision driver in DS Admin controls all supported Arecont Vision cameras. The Arecont IP cameras are fixed and do not support Pan/Tilt/Zoom (). Specific Camera Notes: AV1300 and AV2100: In-camera motion detection on AV1300 is less sensitive at lower resolutions. It is recommended that Integral motion detection be used at lower resolutions with this camera. AV1355: When security is enabled on the camera, the DS Admin username/password credentials are used by the IP driver for authentication. Page 4 of 31 C1024RN-A (8/10)

5 C1024RN-A (8/10) Page 5 of 31 AV3100, AV3130, and 5100: To capture images larger than 2 megapixels (MPx), you must install Integral IP camera driver or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all necessary software versions, go to To view images larger than 2 MPx, you must install Megapixel Support for DS Client/Admin 4.1 and DS ControlPoint or later. To obtain a copy of all necessary software versions, go to Short communication delays (2 to 3 minutes) could occur when you use Digital Sentry to change the configuration of AV3100, AV3130, AV The number and frequency of delays can be decreased by combining multiple configuration changes into as few groups as possible. AV3100: In-camera motion detection on an AV3100 is less sensitive at lower resolutions. Pelco recommends that Integral motion detection be used at lower resolutions with this camera. AV3130: When configuring AV3130 in DS Admin, three different drivers are available including one each for Day, Night, and Automatic modes. The selected driver must match the mode selected in the camera.s software. AV3135: AV3135 can be used with Digital Sentry IP camera driver When security is enabled on the camera, the DS Admin username and password credentials are used by the IP driver for authentication. AV5100: In-camera motion detection will be supported on the AV5100 in a later release. AV8180 and AV8360: The frame rate and quality for all four camera sensors (heads) must be set to the same value. AV8180 and AV8360 do not have a configuration Web page. AV8180 and AV8360 support in-camera motion detection in version and later. Using Integral motion detection at 1600 x 1200 resolution can significantly reduce the performance of the Digital Sentry system. To use Integral motion detection, it is recommended that you select 800 x 600 resolution. AV8180 camera input numbers are not in the same order as their physical locations on the camera. AV8180, AV8185, AV8360, and AV8365: Only the maximum frame rate is supported on these cameras. AV10005: When security is enabled on this camera, the DS Admin username/password credentials are used by the IP driver for authentication.

6 Page 6 of 31 C1024RN-A (8/10) Arecont Vision (1 of 2) Resolutions Frame Rate AV MJPEG 1280 x 1024, 640 x to AV1355 Only full FOV resolutions are supported 640 x x AV MJPEG 1600 x 1200, 800 x to 24 AV x 1200, Full Field of View (FOV) x 600 Data Transmission 1280 x AV MJPEG 1920 x 1200, 960 x to 22 AV MJPEG AV MJPEG Day Mode Night/Auto Mode 1920 x 1200, 960 x x 1024, 640 x to 20 Server-Based x x 1024, 1024 x 768, 640 x AV MJPEG 2560 x 1920, 1280 x to 16 Server-Based 20 AV x 1944, 1296 x 972 Up to 9 AV MJPEG 1600 x 1200, 800 x 600 (per sensor) x4 cameras 1 to 22 AV x 1200, 800 x 600 (per sensor) x4 cameras 1 to 22 AV MJPEG 1600 x 1200, 800 x 600 (per sensor) x4 cameras 1 to 22 AV x 1200, 800 x 600 (per sensor) x4 cameras 1 to

7 C1024RN-A (8/10) Page 7 of 31 Arecont Vision (2 of 2) Resolutions Frame Rate AV Only full FOV resolutions are supported x x x

8 Axis s General Camera Notes A single Axis driver in DS Admin controls all supported Axis IP cameras. When security is enabled on Axis IP cameras, the DS Admin username and password credentials are used by the IP driver for authentication. Specific Camera Notes Axis 223M: Camera quality settings in DS Admin are not supported when using compression on the Axis 223M IP camera. Complex video scenes at high quality settings are not supported at 1600 x 1200 resolution when using Axis 223M cameras on Digital Sentry systems. Axis (1 of 2) Resolutions Frame Rate 206, 207, 207W MJPEG 640 x 480 maximum 1 to MW 210, 210A, 211, 211A, , 214, 231D+, 232D+ 216FD 223M 4.41 MJPEG 1280 x 1024 maximum 1 to x 480 maximum 1 to x 480 maximum 1 to x 480 maximum 1 to Yes (solid state) 10 Yes 640 x 480 maximum 1 to 30 Server-Based x 1200 maximum 640 x 480 maximum 1 to 9 10 Page 8 of 31 C1024RN-A (8/10)

9 C1024RN-A (8/10) Page 9 of 31 Axis (2 of 2) Resolutions Frame Rate 225FD 640 x 480 maximum 1 to D x 480, 704 x 240, 352 x 240, 176 x to 30 MJPEG Yes 241S, 241S Blade, 243SA 704 x 480 maximum 1 to Yes 241Q, 241Q Blade, 241QA 704 x 480 maximum 1 to Yes M , 640 x 480, 480 x 360, 320 x 240, 240 x 180, 176 x 144, 160 x P5534 Yes M7001 (Video Encoder) x 480, 704 x 480, 704 x 240, 352 x 240, 176 x (NTSC), 25 (PAL) 1 to 100 Q7404 (Video Encoder) x 480, 704 x 480, 704 x 240, 352 x 240, 176 x Q7406 (Video Encoder) x 576, 720 x 480, 704 x 480, 704 x 240, 352 x 240, 176 x (NTSC), 25 (PAL)

10 Bosch Security Systems s Bosch Security Systems s Resolutions Frame Rate MJPEG 4CIF 704 x 576 (PAL), 704 x 480 (NTSC) Dinion NWC P 3.0 or later (version 3.52 tested and verified) 2CIF Half D1 CIF 704 x 288 (PAL), 704 x 240 (NTSC) 352 x 576 (PAL), 352 x 480 (NTSC) 352 x 288 (PAL), 352 x 240 (NTSC) 25/30 Server-Based 100 QCIF 176 x 144 (PAL), 176 x 120 (NTSC) Page 10 of 31 C1024RN-A (8/10)

11 Canon s General Notes To view live video on the camera s Web page, you must install Java. Visit the Java Web site at click the Free Java Download, and run the installer. (Do not select the installation in the Google toolbar.) When the installation is complete, refresh the live view on the Web page. settings in DSAdmin do not work with this camera. Presets, iris, and focus functionality will be supported by Digital Sentry in a future release. Canon s IP Camera VB-C Revision 4 MJPEG VB-C50iR 1.2 Revision 68 MJPEG Resolutions 640 x 480, 320 x 240, 160 x x 480, 320 x 240, 160 x 120 Frame Rate 1 to 30 Server-Based 1 to 100 Yes 1 to 30 Server-Based Yes C1024RN-A (8/10) Page 11 of 31

12 Grandeye s Inputs 5 to 8 are 180-degree, 360-degree, and fisheye modes. For these inputs, control is not available and image dewarping is not currently supported by Digital Sentry or DS ControlPoint. Pelco recommends that you configure the same quality setting for all cameras on inputs 1 to 7. The selection of a quality setting for one camera could be affected by the quality settings on other cameras. Grandeye Halocam IPW does not allow frame rate settings. The camera streams video at the frame rates listed in the table. Frame rate and quality settings are based on bit rate and might not match the settings entered in DSAdmin. To enable the Grandeye Web interface, complete the following steps: 1. From Internet Explorer, open the Tools menu, and then select Internet Options. 2. Select the Security tab and click Trusted Sites. 3. Click Default Level and move the slider bar to Low. 4. Click Sites, and then clear the selection Require Server Verification https: For All Sites in this Zone. 5. Enter the IP address of the GrandEye camera in the Add this Website to the Zone box, and then click Add. 6. Click Close, and then click OK. To capture images larger than 2 megapixels (MPx), you must install Integral IP camera driver or later and then Megapixel Support for DS Server/VAU 4.1. To obtain copies of all necessary software versions, refer to To view images larger than 2 MPx, you must install Megapixel Support for DS Client/Admin 4.1 and DS ControlPoint or later. To obtain copies of all necessary software versions, refer to Grandeye s IP Camera Halocam IPW MJPEG Resolutions Inputs 1to4 Inputs 5to7 Input x 480, 320 x x x 1944, 1024 x 768, 640 x 480 Inputs 1 to 7 Frame Rate Single View 9.5 Two-camera view Four-camera view Input 8 Up to 10 Server-Based 90 Page 12 of 31 C1024RN-A (8/10) Yes (10 presets)

13 Ipix s IPIX CommandView Dome CV-D2000 Command View Dome CV-D3000 Resolutions Frame Rate MJPEG 1600 x to 20 MJPEG 2048 x to 12 InSight IS-N2000 MJPEG 1600 x to Yes (solid state) Yes (solid state) 10 C1024RN-A (8/10) Page 13 of 31

14 Page 14 of 31 C1024RN-A (8/10) IQinVision s General Camera Notes When IQinVision IP cameras are configured to capture video at high resolutions, set the video quality in DS Admin to a value above 25. At lower quality settings, high resolution video images could be lost or corrupted. Before using on IQinVision cameras, you must create at least one motion window and enable the motion trigger. To create a motion window, run the IQinVision Web interface and select from the Window menu. To enable the motion trigger, select the Trigger tab in the Web interface, and then select Enabled from the drop-down list. Do not use the IQinVision configuration software to crop images unless the resulting resolution exactly matches the resolution configured for the camera in DS Admin. Failure to do so could cause instability in the Digital Sentry software. It is recommended that you do not transmit video from IQinVision IP cameras to the Digital Sentry server over a wide area network (WAN), which can cause video instability. The requested frame rate might not match specifications in the camera manufacturer s documentation. To capture images larger than 2 megapixels (MPx), you must install Digital Sentry IP camera driver or later and then Megapixel Support for DS Server/VAU 4.1. To view images larger than 2 MPx, you must install Megapixel Support for DS Client/Admin 4.1 and DS ControlPoint or later. IQinVision (1 of 2) Resolutions Frame Rate IQ MJPEG 1280 x 1024, 640 x 512, 320 x 256, 160 x to IQ MJPEG IQ MJPEG 1600 x to x to x to x to x 384, 256 x to

15 C1024RN-A (8/10) Page 15 of 31 IQinVision (2 of 2) Resolutions Frame Rate IQ MJPEG 1280 x to x 512, 320 x 256, 160 x to 30 IQ MJPEG 752 x 480, 376 x 240, 188 x to IQ MJPEG IQ MJPEG IQ MJPEG IQ MJPEG IQ MJPEG IQ MJPEG IQ /2 (070504) MJPEG IQ MJPEG 1280 x to x 512, 320 x 256, 160 x to x 1024, 640 x 512, 320 x 256, 160 x to x to x to x to x to x 384, 256 x to x to x to x 480, 320 x to x to x to x to x to x 384, 256 x to x to x to x 480, 320 x to

16 Page 16 of 31 C1024RN-A (8/10) JVC s Specific Camera Notes VN-C655U: For faster tilt functionality, Pelco recommends that you use the camera s Web interface. JVC Resolutions Frame Rate VN-C655U MJPEG 640 x 480, 320 x to 30 VN-V25U 1.03d MJPEG 640 x 480, 320 x to 30 VN-C215V4U 1.01 MJPEG 640 x 480, 320 x to 30 7 Yes (99 presets) 7 7

17 NetBotz s General Camera Notes Security settings prevent the NetBotz Advanced View software from being started directly from DSAdmin. You must install and run Advanced View as a stand-alone application separate from DSAdmin. NetBotz camera and image quality cannot be configured in DSAdmin. It must be configured in NetBotz Advanced View by clicking the Configuration icon, clicking the Capture button, and selecting the quality setting from the Image drop-down list. In the NetBotz Advanced View software, camera labels must use the format DSCamera#x, where x is the Digital Sentry camera input. For example, the camera connected to Digital Sentry camera input 8 must have a camera label of DSCamera#8; however, in the Digital Sentry software, the camera can be named as desired. To view and record video on a Digital Sentry system, a user with a Privilege Set other than None must be created in the NetBotz Advanced View software. The user s NetBotz name and password must be used when configuring the NetBotz cameras in the DSAdmin software. Only users who are assigned the Administrator privilege set in NetBotz Advanced View can change camera settings such as contrast, quality, and motion detection. The requested frame rate might not match specifications in the camera manufacturer.s documentation. Specific Camera Notes NetBotz 320 or NetBotz420: If more than one of these cameras is connected to a Digital Sentry Video Acquisition Unit (VAU), use server-based motion detection instead of in-camera motion detection. NetBotz 500: This camera will support in-camera motion detection in a later release of the IP camera driver. C1024RN-A (8/10) Page 17 of 31

18 Page 18 of 31 C1024RN-A (8/10) NetBotz Resolutions Frame Rate 320, Build _1132 MJPEG 640 x 480, 320 x 240, 160 x to MJPEG 1280 x 1024, 1024 x 768, 800 x to x 480, 320 x 240, 160 x to 30

19 Panasonic s General Camera Notes If the frame rate is set to a value larger than the maximum value for a camera, the frame rate defaults to the maximum value. Frame rates are rounded up to the next value listed in the tables. For example, if the requested frame rate is 8 frames per second (fps), the camera provides 10 fps. Because of a limitation regarding the number of users viewing feeds from the camera, the frame rate requested might not match what the camera can supply at that time. The camera automatically logs off users who are not actively using the feeds, which then increases the total throughput for remaining users. Frame rates could be reduced as quality settings are increased. All camera-specific Panasonic drivers have been replaced by a single Panasonic i-pro driver in DSAdmin. To capture images larger than 2 MP, you must install Digital Sentry IP camera driver or later and then Megapixel Support for DS Server/VAU 4.1. To view images larger than 2 MP, you must install Megapixel Support for DS Client/Admin 4.1 and DS ControlPoint or later. Specific Camera Notes: WV-NP1004: When changing from partial- to full-scan mode using different resolutions, this camera might not display video for up to 4 minutes. WV-NS202, WS-NS202A, and WV-NS324: Digital Sentry systems support a maximum of 10 presets for these cameras. WV-NS202, WS-NS202A and WV-NS484: When changing the camera configuration, the Digital Sentry VideoServer Service might restart, which will interrupt video recording for several minutes. WV-NS324, WV-NS472 and WV-NS474S: Before changing the resolution on these cameras, close the Digital Sentry client software. The Digital Sentry system will not record video for up to 4 minutes. WV-NS954: When using this camera, select the Panasonic ipro driver in DS Admin. C1024RN-A (8/10) Page 19 of 31

20 Page 20 of 31 C1024RN-A (8/10) Panasonic (1 of 2) WV-NF E0_1.06 WV-NP WV-NP304 WV-NP502 WV-NW502S 1.05E0_ , WV-NP MJPEG WV-NS202 WV-NS202A 2.01 P1 Resolutions 1280 x 960 (MJPEG only), 640 x 480, 320 x 240 Frame Rate 1 to 30 Server-Based 640 x 480, 320 x to 30 Server-Based 1280 x 960 (MJPEG only), 640 x 480, 320 x to 30 Server-Based 3 MPx 1.3 MPx MJPEG: 2048 x 1536, 1280 x 960, (VGA: 640 x 480) : (VGA: 640 x 480), (QVGA: 320 x 240) : 1280 x 960 (VGA: 640 x 480), (QVGA: 320 x 240) MJPEG: 1280 x 960 (VGA: 640 x 480) : (VGA: 640 x 480), (QVGA: 320 x 240) : 1280 x 960 (VGA: 640 x 480), (QVGA: 320 x 240) x x x x Server-Based 1 to 100 Server-Based 1 to x 480, 320 x to 30 Server-Based 1 to 100 WV-NS E MJPEG 640 x 480, 640 x 240, 320 x 240, 160 x to 30 Server-Based 1 to 100 WV-NS P MJPEG 640 x 480, 640 x 240, 320 x 240, 160 x to 30 Server-Based 1 to 100 Yes (64 presets) Yes (16 presets)

21 C1024RN-A (8/10) Page 21 of 31 Panasonic (2 of 2) WV-NS474S 2.22E MJPEG WV-NS E1 WV-NS E0 Resolutions 640 x 480, 640 x 240, 320 x 240, 160 x 120 Frame Rate 1 to 30 Server-Based 1 to x 480, 320 x to 30 Server-Based 1 to x 480, 320 x to 30 1 to 100 Yes (presets ) Yes (presets ) Yes (presets )

22 Pelco s Specific Camera Notes IP110: This camera streams video to an IP address of NIC0. On systems with a network port in a PCI slot and on the motherboard, use the network port in the PCI slot. On systems with two network ports on the motherboard, use the network port located on the left (closest to the power supply). IX10, IX30, IXE20, and IXSO: In MJPEG mode, the correct frames per second are not produced. Pelco s and Encoders (1 of 7) Resolutions Maximum Frame Rate IP NTSC PAL 704 x 480, 704 x 240, 352 x x 576, 704 x 288, 352 x IP NTSC PAL 704 x 480, 704 x 240, 352 x x 576, 704 x 288, 352 x Page 22 of 31 C1024RN-A (8/10)

23 C1024RN-A (8/10) Page 23 of 31 Pelco s and Encoders (2 of 7) Resolutions Maximum Frame Rate Spectra IV IP NTSC PAL 704 x 480, 704 x 240, 352 x x 576, 704 x 288, 352 x 288 Yes (Up to 255 presets) Spectra Mini IP NTSC PAL 704 x 480, 704 x 240, 352 x x 576, 704 x 288, 352 x 288 Yes (Up to 55 presets) ID10 Series Network Cameras with Sarix Technology MJPEG 1280 x 1024,1280 x x 720, 800 x x 480, 320 x x 1024,1280 x x x x 480, 320 x 240

24 Page 24 of 31 C1024RN-A (8/10) Pelco s and Encoders (3 of 7) Resolutions Maximum Frame Rate ID30 Series Network Cameras with Sarix Technology x 1536 (4:3) 1920 x 1080 (16:9) 1600 x 1200 (4:3) 1280 x 1024 (5:4) 1280 x 960 (4:3) 1280 x 720 (16:9) 800 x 600, 640 x 480, 320 x 240 (4:3) IDS0 Series Network Cameras with Sarix Technology x x 480, 320 x 240 (4:3) IE10 Series Network Cameras with Sarix Technology MJPEG 1280 x 1024,1280 x x 720, 800 x x 480, 320 x x 1024,1280 x x x x 480, 320 x 240

25 C1024RN-A (8/10) Page 25 of 31 Pelco s and Encoders (4 of 7) Resolutions Maximum Frame Rate IE30 Series Network Cameras with Sarix Technology x 1536 (4:3) 1920 x 1080 (16:9) 1600 x 1200 (4:3) 1280 x 1024 (5:4) 1280 x 960 (4:3) 1280 x 720 (16:9) 800 x 600, 640 x 480, 320 x 240 (4:3) IES0 Series Network Cameras with Sarix Technology x x 480, 320 x 240 (4:3) IEE10 Series Network Cameras with Sarix Technology MJPEG 1280 x 1024,1280 x x 720, 800 x x 480, 320 x x 1024,1280 x x x x 480, 320 x 240

26 Page 26 of 31 C1024RN-A (8/10) Pelco s and Encoders (5 of 7) Resolutions Maximum Frame Rate IEE20 Series EP Network Cameras with Sarix Technology A x 1080, 1600 x 1200, 1280 x 1024, 1280 x 960, 1280 x 720, 800 x 600, 640 x 480, 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, 320 x 240, 320 x 176 IM10 Series Network Cameras with Sarix Technology x 1024 (5:4) 1280 x 960 (4:3) 1280 x 720 (16:9) 800 x 600 (4:3) 640 x 512 (5:4), 640 x 480 (4:3) 640 x 352 (16:9), 480 x 368 (4:3) 480 x 272 (16:9), 320 x 240 (4:3) 320 x 176 (16:9) 800 x 600 (4:3) IMS0 Series Network Cameras with Sarix Technology , 704 x 576 (4CIF PAL) 704 x 480 (4CIF NTSC), 640 x 512 (5:4) 640 x 480 (4:3), 640 x 352 (16:9), 480 x 368 (4:3), 480 x 272 (16:9), 352 x 288 (CIF PAL) 352 x 240 (CIF NTSC), 320 x 250 (5:4) 320 x 240 (4:3), 320 x 176 (16:9)

27 C1024RN-A (8/10) Page 27 of 31 Pelco s and Encoders (6 of 7) IX10 Series Network Cameras with Sarix Technology IX30 Series Network Cameras with Sarix Technology IXE20 Series EP Network Cameras with Sarix Technology IXS0 Series Network Cameras with Sarix Technology NET5301T (Encoder) NET5308T (Encoder) A A A A and later and later Resolutions 1280 x 1024, 1280 x 960, 1280 x 720, 800 x 600, 640 x 480, 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, 320 x 240, 320 x x 1536, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 960, 1280 x 720, 640 x 480, 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, 320 x 240, 320 x x 1080, 1600 x 1200, 1280 x 1024, 1280 x 960, 1280 x 720, 800 x 600, 640 x 480, 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, 320 x 240, 320 x x 600, 704 x 576, 704 x 480, 640 x 480, 640 x 512, 640 x 352, 480 x 368, 480 x 272, 352 x 286, 356 x 240, 320 x 256, 320 x 240, 320 x 176 Maximum Frame Rate 352 x 240, 720 x 240, 720 x to 30 Server-Based x 240, 720 x 240, 720 x to 30 Server-Based 10

28 Page 28 of 31 C1024RN-A (8/10) Pelco s and Encoders (7 of 7) Resolutions Maximum Frame Rate NET5402T (Encoder CIF 2CIF CIF 704 x 576 (PAL), 704 x 480 (NTSC 704 x 288 (PAL), 704 x 240 (NTSC) 352 x 288 (PAL), 352 x 240 (NTSC) 1 to (varies with stream config.) Server-Based NET5404 (Encoder) CIF 2CIF CIF 704 x 576 (PAL), 704 x 480 (NTSC 704 x 288 (PAL), 704 x 240 (NTSC) 352 x 288 (PAL), 352 x 240 (NTSC) 1 to (varies with stream config.) Server-Based

29 C1024RN-A (8/10) Page 29 of 31 Sony s and Encoders General Camera and Encoder Notes Unless otherwise noted, only the NTSC versions of these cameras are currently supported. The frame rate requested might not match specifications in the camera manufacturer s documentation. A single Sony driver in DS Admin controls all supported Sony cameras. Sony s and Encoders (1 of 2) Resolutions Frame Rate SNC-CS3 MJPEG 640 x 480, 320 x to 25 Server-Based 10 SNC-CS SNC-CS x 480, 480 x 360, 384 x 288, 320 x 240, 256 x 192, 160 x x 480, 320 x 240, 160 x 120 MJPEG 5 to 30 (NTSC), 5 to 25 (PAL) 1 to 30 (NTSC), 1 to 25 (PAL) Server-Based 1 to 30 Server-Based MJPEG 5 9 MJPEG 10 9 SNC-DF40 MJPEG 640 x 480, 320 x to 18 Server-Based 10 SNC-DF70 MJPEG 640 x 480, 320 x to 18 Server-Based 10 SNC-DF80N 1.21 SNC-DS MJPEG 640 x x x x x x x x x x x x Server-Based

30 Page 30 of 31 C1024RN-A (8/10) Sony s and Encoders (2 of 2) SNC-P1 MJPEG 640 x 480, 320 x to 18 Server-Based 10 SNC-P5 MJPEG 640 x 480, 320 x to 18 Server-Based 10 SNC-RX _rev1 MJPEG 10 Yes 640 x 480, 320 x 240, 1 to 30 Server-Based ( x presets) SNC-RZ20 MJPEG 640 x 480, 320 x to 25 Server-Based 10 SNC-RZ x 480, 480 x 360, 384 x 288, 320 x 240, 256 x 192, 160 x 120 MJPEG 5 to 30 (NTSC) MJPEG 5 Yes Server-Based (16 1 to 30 (NTSC) 9 presets) SNC-RZ30 MJPEG 640 x 480, 320 x to 25 Server-Based 10 SNTV704 (encoder) SNC-RZ MJPEG 2.10_rev1 Resolutions 720 x 480, 640 x 480, 320 x x 480, 320 x 240, 160 x 120 Frame Rate Yes (16 presets) 1 to 25 Server-Based 1 to 30 Server-Based MJPEG 10 Yes (16 9 presets) Vivotek s Vivotek Resolutions Frame Rate FD g 640 x 480, 320 x 240, 176 x to 30 MJPEG 5 15

31 C1024RN-A (8/10) Page 31 of 31 Contact Information Pelco, Inc. Worldwide Headquarters 3500 Pelco Way, Clovis, California USA USA & Canada Tel: (800) , Fax: (800) International Tel: +1(559) , Fax: +1(559) Document Revision History Document # Date Comments C1024RN 7/10 Original version. C1024RN-A 8/10 Updated the Digital Sentry IP camera driver version to Incorporated all general and specific camera notes from the individual IP camera release notes. Added IP cameras to the ACTi and Axis tables; added IP cameras to the Arecont table and modified the supported codec information; modified the Bosch IP camera information; added IE and IEE series IP cameras to the Pelco table and corrected the Pelco IP camera name from IX0 to IX30. Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice. Copyright 2010, Pelco, Inc. All rights reserved.