BRITISH STANDARD - SIMPLEX
|
|
- Kristopher Rose
- 6 years ago
- Views:
Transcription
1 BRITISH STANDARD - SIMPLEX Inside Roller Plate Plate Plate Pin Pin Con F B Weight No No No No No No No Inch mm Width Dia Height Width Width Dia Len Link lbf lb/ft No Inner Outer Extra Min A A B C D E F G H1 J * B B B # B # B # B B B B B B CHAINS TO BS 228 :1984 * BUSH CHAIN F B = AXIAL BREAKING FORCE # THESE CHAINS CAN BE SUPPLIED NICKEL PLATED STRAIGHT SIDE PLATES NOTE: MULTIPLEX VERSIONS AVAILABLE ON REQUEST No.4 No.107 No.11 No.26 No.12 No.30 Page 21
2 BRITISH STANDARD - DUPLEX Inside Roller Plate Plate Plate Pin Pin Con Trans F B Weight No No No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf lb/ft No Inner Outer Extra Min A A B C D E F G H2 J K 05B B * B B B B B B B B B CHAINS TO BS 228 :1984 * STRAIGHT SIDE PLATES F B = AXIAL BREAKING FORCE No.4 No.107 No.11 No.26 No.12 No.30 Page 22
3 BRITISH STANDARD - TRIPLEX Inside Roller Plate Plate Plate Pin Pin Con Trans F B Weight No No No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf lb/ft No Inner Outer Extra Min A A B C D E F G H3 J K 06B * B B B B B B B B B F B = AXIAL BREAKING FORCE * STRAIGHT SIDE PLATES No.4 No.107 No.11 No.26 No.12 No.30 Page 23
4 BRITISH STANDARD - STRAIGHT SIDE PLATE STRAIGHT SIDE PLATE - SIMPLE Inside Roller Plate Plate Plate Pin Pin Con Trans F B Weight No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf lb/ft No Inner Outer Extra Min A A B C D E F G H1 J K 06B B B B B STRAIGHT SIDE PLATE - DUPLEX 06B B B B STRAIGHT SIDE PLATE - TRIPLEX 06B F B = AXIAL BREAKING FORCE No.4 No.107 No.26 No.30 Page 24
5 BRITISH STANDARD - SIMPLEX DOUBLE PITCH BRITISH STANDARD Inside Roller Plate Plate Plate Pin Pin Con F B Weight No No No No No No No Inch mm Width Dia Height Width Width Dia Len Link lbf kg/m No Inner Outer Extra Min A A B C D E F G H J 208B * B * B * B B B B F B = AXIAL BREAKING FORCE * STRAIGHT SIDEPLATE No.4 No.107 No.11/58 No.12 No.30 Page 25
6 BRITISH STANDARD - SYNO RENOLD SYNO LUBE FREE CHAIN Renold Syno combines the technology of a radical new built-in lube system, with the proven precision components of Renold. It is ideal for chain applications requiring a clean environment, or where maintenance is difficult. A new technology self-lubricating system. Direct replacement for standard oiled chains on existing sprockets. High performance ratings. Available for drive chains and conveyor attachment chains. Solid, durable gearing rollers reduce noise and sprocket wear. BS/ANSI chains available. Significantly lower maintenance costs. Up to double wear life of other lube free chains. Extended chain life compared to standard chains (up to 15 times longer than standard chains when run unlubricated). Application and disposal of expensive lubricants not required. Provides a clean environment around the chain drive/conveyor. Reduces hazards caused by waste lubricants. Operating temperature range -10 to +70 C. Renold Syno is also suitable for: bookbinding, canning plants, electronics assembly, food packaging, food preparation plants, paper and tissue manufacture, pet food processing, pharmaceutical industry, printing/carton equipment, textiles and clothing manufacture RENOLD SYNO BS Standard Lube free chain - Simple Inside Roller Plate Plate Plate Pin Pin Con F B Weight No No No No No Inch mm Width Dia Height Width Width Dia Len Link lbf lb/ft No Inner Outer Extra Min A A B C D E F G H1 J 08B-I B-I B-I B-I F B = Axial Breaking Force N.B Renold Syno does not conform exactly to BS standards. A larger bush and thus a smaller pin diameter are needed to meet the high performance requirements. However, all gearing dimensions of Renold Syno do comply with BS standards. Consult Renold for specific requirements. Page 26
7 BRITISH STANDARD - SYNO ATTACHMENTS LUBE FREE CHAIN: BS STANDARD ATTACHMENTS Renold Syno BS standard M1 attachments (outer plates only) No. Inch mm No. A A F L M N P 08B-I B-I B-I B-I Renold Syno BS standard K1 attachments (outer plates only) No. Inch mm No. (max) A A F L O P T U 08B-I B-I B-I B-I Renold Syno BS standard K2 attachments (outer plates only) No. Inch mm (max) No. A A F O P R S T U 08B-I B-I B-I B-I Renold Syno BS standard extended bearing pins-type D Pin Extension length Pin No. Inch mm dia ± 0.01 length No. ± (max) A A G V H 08B-I B-I B-I B-I Page 27
8 BRITISH STANDARD - CORIS RENOLD CORIS STAINLESS STEEL CHAIN Renold Coris Roller is manufactured using Class 300 Series stainless steel specification. These chains are ideal for acidic or alkaline environments, or where the chain will be exposed to water, and for very high or very low temperature locations, -40 to +752 F where resistance to corrosion is a requirement. Renold Coris should be selected when resistance to chemical action is critical. Renold Coris is manufactured using FDA approved material and is prelubricated with USDA H1 approved lubricant. RENOLD CORIS BS standard stainless steel chain - Simple Inside Roller Plate Plate Plate Pin Pin Con Trans F B Bearing Weight No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf Area lb/ft No Inner Outer Extra Min Sq. in A A B C D E F G H1 J K 08B-I B-I B-I B-I RENOLD CORIS BS standard stainless steel chain - Duplex A A B C D E F G H2 J K 08B B B B F B = Axial Breaking Force No.4 No.107 No.11 No.26 Page 28
9 BRITISH STANDARD - NICKEL PLATED NICKEL PLATED BS STANDARD - SIMPLE Inside Roller Plate Plate Plate Pin Pin Con Trans F B Weight No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf lb/ft No Inner Outer Extra Min A A B C D E F G H1 J K 06B B B B F B = AXIAL BREAKING FORCE No.4 No.107 No.26 No.30 Page 29
10 CRANKED LINK (OFFSET SIDEBAR) CHAIN G A B C H F API Renold Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Con Trans F B Weight No No No No No No No Inch mm Width Dia Height Width Width Dia Len Link Pitch lbf lb/ft No Inner Outer Extra Min A A B C D E F G H J K API API F B = AXIAL BREAKING FORCE No.59 Page 30
11 BRITISH STANDARD - ATTACHMENTS ISO/BS STANDARD M1 ATTACHMENTS M1 ATTACHMENTS No Inch mm No A A E F L M N P Q B B * B B B B B B * Straight Plate RENOLD BS STANDARD M1 ATTACHMENTS No Inch mm No A A E F L M N P Q 08B B B B B Page 31
12 BRITISH STANDARD - ATTACHMENTS ISO/BS STANDARD M2 ATTACHMENTS M2 ATTACHMENTS No Inch mm No A A E F M N P Q R S B B * B B B B B B * Straight Plate Page 32
13 RENOLD BS STANDARD K1 ATTACHMENTS K1 ATTACHMENTS No Inch mm No A A E F L O P Q T U 08B B B B B Page 33
14 BRITISH STANDARD - ATTACHMENTS ISO/BS STANDARD K1 ATTACHMENTS K1 ATTACHMENTS No Inch mm No A A E F L O P Q T U B B * B B B B B B * Straight Plate Page 34
15 BRITISH STANDARD - ATTACHMENTS RENOLD BS STANDARD K2 ATTACHMENTS K2 ATTACHMENTS No Inch mm No A A E F O P Q R S T U 08B B B B B Page 35
16 BRITISH STANDARD - ATTACHMENTS ISO/BS STANDARD K2 ATTACHMENTS K2 ATTACHMENTS No Inch mm No A A E F O P Q R S T U B B * B B B B B B * Straight Plate Page 36
17 BRITISH STANDARD - EXTENDED BEARING PINS RENOLD BS STANDARD EXTENDED BEARING PINS EXTENDED PINS WITH SNAP-RING GROOVE Extended pin + snap-ring groove (type C) Unit Assemblies No.163 Outer link No.165 Connecting link-spring clip EXTENDED PINS TYPE C No.164 Outer link No.166 Connecting link-spring clip Pin Extension length Snap-ring groove track No Inch mm dia. to snap-ring groove Width Dia. from chain centre No ±.0004 (max) (min) (min) line (max) A A b c d e f 08B B B B STRAIGHT EXTENDED PINS Straight extended pin (type D) G EXTENDED PINS TYPE D Pin Extension Pin No Inch mm dia. length Length ± ±0.01 (max) No A A G V H Unit Assemblies 06B * B B B B B B No. 563 Outerlink No. 565 Connecting link - spring clip * Straight side plates No. 564 Outerlink No. 566 Connecting link - spring clip Page 37
18 BRITISH STANDARD - CONNECTING LINKS ATTACHMENT CONNECTING LINKS FOR RENOLD BS/DIN SIMPLE ROLLER CHAIN No.240 No.272 No.140 No.172 No.144 No.175 No.242 No.276 No.142 No.176 No.145 No.180 No.270 No.278 No.170 No.178 No.174 No.181 No.164 No.165 No.563 Outerlink No.565 Connecting link - spring clip No.163 No.166 No.564 Outerlink No.566 Connecting link - spring clip SPECIAL OR ADAPTED TRANSMISSION CHAIN In addition to our ranges of standard series chain we can also offer: Transmission up to in. pitch and 500 ton breaking load. Standard Series adapted to your unique needs with special attachments. Special designed with integral attachments to meet individual requirements. Renold Adapted can be in the form of special plates, pin rollers, or blocks which can be designed, manufactured and assembled into chain of all pitch sizes. Attachments can be made from normal materials, stainless steel or plastics. We will be pleased to receive details of your requirements and evaluate them for strength, durability, price and despatch. They can be manufactured from your own designs or adapted from existing drawings. The illustrations below show only a small selection of the wide range of variants and these chains have been used successfully in many branches of industry for the feeding, conveying and discharge of a variety of products. Page 38
A3-USA Multi-Rake & Step Screens
A3-USA Multi-Rake & Step Screens www.a3-usa.com Wastewater Equipment CBS Multi-Rake Bar Screen Headworks in-channel bar screen The A3 CBS multi-raked bar screen is ideal for pre-treatment of wastewater
More informationAutomatic Access Interlock User Manual - Original Language Version
The Salus is a single key automatic access interlock for use on hinged or sliding doors. The interlock is available in both left and right hinged and sliding door configurations. The unit is manufactured
More informationRexroth Linear Bushings and Shafts, GreenLight Selection
4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Rexroth Linear Bushings and Shafts, GreenLight Selection Bosch Rexroth is the global leader in metric bushings. Whether you need standard bushings
More informationTEN GOOD REASONS TO USE PLASTIC BALL BEARINGS
TEN GO REASONS TO USE PLASTIC BALL BEARINGS magnetic 316 stainless balls. They are ideal for use where there can be no magnetic distortion. 6. HYGIENIC: Plastic ball bearings are naturally clean because
More informationVersaPro Non-Metallic Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Class III CSA - Type 3 R Enclosed & Gasketed Features: Non-Metallic Fluorescent
More informationACCESSORIES. Setscrew Ball Bearings LUBRICANTS AIR HANDLING SEALS HOUSING MATERIAL HIGH TEMPERATURE OTHER MODIFICATIONS
Setscrew Ball Bearings LUBRICANTS DODGE ball bearings are factory lubricated with a lithium complex base lubricant. For applications where extreme ambient temperatures or speeds are anticipated or environmental
More informationUNIFLEX TRIPLE SPRING COUPLING
Specialty Couplings Overview Uniflex Coupling Design Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design The Uniflex Coupling is an all steel, single piece coupling that solves a variety
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationFuture Trends Part 3 Building Taper Roller Bearings the AIES way Dr Ian McLuckie
Future Trends Part 3 Building Taper Roller Bearings the AIES way Dr Ian McLuckie April 2016 ian.mcluckie@aiesl.co.uk 1 Taper Roller Bearings the AIES way Tribology and Bearing Design see future papers
More informationCALCULATION AND DESIGN OF CHAIN TRANSMISSIONS
CALCULATION AND DESIGN OF CHAIN TRANSMISSIONS Project and calculation of the chain transmission follows standards CSN 0 809 and DIN 89. Chain selection and the first chain project are coming from Diagram
More informationPN Gold Mounted Ball Bearings
PN Gold Mounted Ball Bearings PN Gold with high strength reinforced composite housing PN Gold with 1 passivated stainless steel housing PN Gold Extended Bearing Life for Highly Corrosive Environments Reinforcing
More informationProject 8.1 Model A Button Maker
Project 8.1 Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part or product is also important. Communicating
More informationContents. Page 2 TRCTFP101
Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial
More informationSmall Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More informationRoller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
More informationEngineering Class Chain and Sprockets
sec_09_ 11/18/08 2:55 PM Page 88 ngineering lass hain an Sprockets eavy-uty poer transmission applications require tough, long-lasting chains an sprockets. Renol Jeffrey has the experience an the expertise
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationFO-BD2 Series. When connected with. SFP transceiver. When connected with. modular jack
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Waterproof I/O Connector to Make Direct Connection with SFP FO-BD2 Series When connected with SFP transceiver CONNECTOR MB-0278-2 May 2015 Plug Receptacle
More informationActuator Series Common to Miniature, V-Size models
V/VX/D3V Common Accessories Ordering Information Actuators (Sold Separately) Actuators are supplementary components used when operating pin plunger switches using cams or dogs or when transmitting mechanical
More informationdrylin specialists drylin Specialists Telescopic guides Measuring systems Roller guides Square linear guide Slide disks
drylin Specialists Telescopic guides Measuring systems Roller guides Square linear guide Slide disks 865 drylin Specialists Product Overwiew drylin NT Telescopic rails ubrication-free solid polymer/aluminum
More informationrobust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
More informationPosition of HMTL in Hitachi Group
HITACHI CHAIN Position of HMTL in Hitachi Group Hitachi,Ltd. Total employee: 400,000- Total Sales : US$100 billion Affiliates : 900 Hitachi Construction Machinery Hitachi Metals Hitachi Cable Hitachi Chemical
More informationProbe Pin XP3A. Electroplated Probe Pin for High Reliability. Feature. List. New Product News
New Product News Probe Pin Electroplated Probe Pin for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard probe
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationMembers: Sponsor: Dalton Hamilton Preston-Eastin Levi Edens Kenneth Mui Brice Abbott
Members: Dalton Hamilton Levi Edens Brice Abbott Sponsor: Preston-Eastin Kenneth Mui Mission Statement Wolf Pack Engineering strives to provide our customer with innovative solutions. We take a cost effective
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationCat.8 Shielded Keystone Jack Description
Description RiT s CAT8 Shielded Keystone Jacks are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations. Phosphor
More informationFume Hood Cable Sash Sensor
Desigo Room Automation Fume Hood Cable Sash Sensor DXA.B130 and DXA.B200 A peripheral device, to acquire the sash position of a laboratory fume hood for Siemens laboratory fume hood controllers. Cable
More informationMore than safety. Precision Multiple Limit Switches
More than safety. Precision Multiple Limit Switches Automation More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian
More informationTable 1. Termini Types
1. SCOPE. This NAVSEA Drawing covers multiple removable pin termini and socket termini which are required for circular, plug and receptacle style, fiber optic connectors respectively. The connector plugs
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationElectroformed Probe Pins XP3A
New Product Electroformed Probe Pins Electroplated Probe Pins for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationActuator LA31. Data sheet LINAK.COM/DESKLINE
Actuator LA31 Data sheet LINAK.COM/DESKLINE LA31 The LA31 actuator is a very quiet and powerful linear actuator desigend for a variety of desk applications ranging from kitchen applications to industrial
More informationDME DIN Metric Components. New components expand in-stock line
DME DIN Metric Components New components expand in-stock line Bronze-Plated Wear Plates Metric T DME Bronze-Plated Wear Plates provide a long-lasting wear surface for Bronze-Plated molds requiring slides,
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 196 Extremely quiet and low-vibration for highly dynamic applications* Long service life Ideal for highly dynamic applications High lateral stability Suitable for clean rooms Simple shortening and
More informationFlanged Hi-Roller FHR Bearings
Flanged Hi- FHR Bearings Flanged High Stud Other Spec A B C D E F G H I S Stud Stud Flange Flange FHR-100 1.000 0.781 0.437 1.000 0.500 7/16-20 0.500 0.219 1.375 0.031 630 140 230 FHR-112 1.125 0.781 0.437
More informationCommon to all H3CR. Basic Setting. Setting of Selectors. Selection of Operating Mode. Selection of Time Unit and Time Range. Common to all H3CR 1
Common to all H3CR Note: The undermentioned is common for all H3CR models. Basic Setting Setting of Selectors The s can be turned clockwise and counterclockwise to select the desired time unit, time range,
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationNEW BenchPro Series Multi-Purpose Digital Bench Scale
The BenchPro Series family of digital bench scales is ideal for many diverse industries and markets around the world. As a general purpose scale, the BenchPro offers many benefits, including the ability
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationPOWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE
POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.
More informationParts Catalogue MP1 554 WSQE MP1 554 WSQE. for model
Parts Catalogue for model MP1 55 WSQE MP1 55 WSQE Use GLOBAL GARDEN PRODUCT Genuine Spare Parts specified in the parts list for repair and/or replacement. The contents described in the parts list may change
More informationYOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
More informationTimken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
More informationHigh Torque Type Ball Spline
58-1E Models LBS, LBST, LBF, LBR and LBH Seal Spline shaft Spline nut Ball Retainer Snap ring Fig.1 Structure of Model LBS Point of Selection Point of Design Options Precautions on Use Accessories for
More informationNew Ceramy. Venetian Blind
Venetian Blind New Ceramy New Ceramy offers open-and-close and tilting operations with a one-control pipe. The pipe can be easily switched from one side to the other. Fine ceramic parts inside Stopper
More informationLCC Pump Series - Wear Resistant, High Performance Slurry Pumps
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals
More informationThe 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
More informationAmphe-Lite Series contacts, sealing plugs, plastic dust caps
contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More informationROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
More informationLevel Plus. Liquid-Level Sensors With Temposonics Technology. Accessories Catalog
Features Level Plus Liquid-Level Sensors With Temposonics Technology Floats, s and Accessories for Process Level and Tank Gauging Applications Accessories Catalog Variety of styles and sizes to fit most
More informationInductive displacement measurement system model series IE25P with programmable analogue interface
Inductive displacement measurement system Document No.: IE 12781 BE Date: 05.01.16 Contactless, wear-free sensor system Analogue interface Measuring range programmable Measuring range up to 0 mm Stainless
More informationXSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value
XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products
More informationSolutions for Linear Measurement
Solutions for Linear Measurement Magnetic Linear Measurement Systems LIMES Draw ire Sensors from Mini to Maxi Measuring heels, Length Measurement Kits Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415
More informationBEAVER TECHNOLOGY SERVICES
BEAVER TECHNOLOGY SERVICES EMPOWERED E E BY INNOVATION N O N CONTENTS CUSTOM FABRICATION ENGINEERING & CONSULTING SERVICES... 2 TRIPODS & ACCESSORIES... 3 HOISTS, DAVITS, CRANES & ACCESSORIES... 4 PORTABLE
More informationCat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
More informationKodak Single Use Camera
Kodak Single Use Camera The Shutter Where is the shutter in the life cycle of the disposable camera? All parts of the Kodak disposable camera go through an entire life cycle. This consists of research
More informationI/O delay. (0.32 in ±0.06 in)
R Inductive Power Couplers Allows Wireless Transmission of ON/OFF Signals from Input Devices and Power to Input Devices H Use the electromagnetic coupler to transmit input signals to the B7A Output Unit
More informationNecklace Microphone User Manual
Necklace Microphone User Manual Introduction The DPA d:screet Necklace Microphone is designed for use with wireless systems in environments like theater and television, and is especially well suited for
More information1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
More informationTORQUE LIMITER SERIES 200
TORQU LIMITR SRIS 00 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.
More informationHeat Exchanger Condenser Expanders
Heat Exchanger Condenser Expanders The world standard in tube expanders Airetool heat exchanger and condenser expanders have long been recognized as the standard to which all other brands are measured.
More informationIN QUALITY BUILT TO CASE TAPERS. BB-2 BB-2/SS TB-2 SB-2HD SB-2EX SB-2EX RANDOM SB-2/FC EASY PACKER VCTS Accessories. First in Quality. Built to Last.
IN QUALITY BUILT TO CASE TAPERS BB-2 BB-2/SS TB-2 SB-2HD SB-2EX SB-2EX RANDOM SB-2/FC EASY PACKER VCTS Accessories First in Quality. Built to Last. 1 (800) 85-944 www.eastey.com COST-EFFECTIVE CASE SEALING
More informationDatamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
More informationTURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products General Accessories Liquid Tight Strain Relief Cable Glands Lock Nuts Page R2 - R4 Page R6 Snap-in Labels Strain Relief Cord Grips Page R5 Page R5 Protective Sleeving
More informationLEXMARK E250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS
LEXMARK E250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS LEXMARK E450 LASER PRINTER DRUM UNIT REMANUFACTURING THE LEXMARK E250/350/450 DRUM UNIT By Mike Josiah SUPPLIES REQUIRED New replacement drum
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationJuly Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
More informationGanged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
More informationFOR TUBE FITTINGS OR-910N OR-910NA 5/8" 7/8" ".097" 11/16".863".116" 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS
FOR TUBE FITTINGS O-Ring Seals - Nitrile / Neoprene oints toriques d'étanchéité nitrile / néoprène can supply the right NITRILE O-Ring to suit YOUR purpose. The Nitrile O-Rings listed below are made especially
More informationCompact, fast, reliable. Inductive, capacitive and magnetic sensors.
Compact, fast, reliable. Inductive, capacitive and magnetic sensors. Around the globe, automation would not be the same without non-contact inductive proximity sensors. For decades, millions of such metal-detecting
More informationGoTo Europe Focused Delivery Program
GoTo Europe Focused Delivery Program Product Produktübersicht Overview Lineartechnik Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts.
More informationWaterproof Bearings Designed for demanding environments
Waterproof Bearings Designed for demanding environments /// Flange bearings /// Pillow block bearings /// Solid housings /// Easy assembly Vill du veta mer ring: 019-12 77 96 /// USDA accepted /// Food
More informationBall Spline Types LT and LF
Ball Spline Types and LF Ball Spline nut Snap ring Seal Retainer Spline shaft Fig. Construction of Ball Spline Type Construction and Features Ball Spline types and LF have four or six trains of loadbearing
More informationConnectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
More informationC11.11 CHRONO STANDARD C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS C11.11 CHRONO STANDARD 01.06.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...c11.11.03
More informationMechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
More informationOUTDOOR SECURITY CATALOGUE 2015/16
OUTDOOR SECURITY CATALOGUE 2015/16 Introduction Eurospec was formed in 1997 as a subsidiary of Carlisle Brass specialising in the commercial sector of the architectural ironmongery market. Following the
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationGRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
More informationParts Catalogue MP1 504 WQ MP1 504 WQ. for model
Parts Catalogue for model MP1 50 WQ MP1 50 WQ Use GLOBAL GARDEN PRODUCT Genuine Spare Parts specified in the parts list for repair and/or replacement. The contents described in the parts list may change
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More informationHARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
More informationLevel Plus. Product Accessories. Magnetostrictive Liquid-Level Sensors with Temposonics Technology
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology SENSORS Product Accessories Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming Document Part Number 551103
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationNARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
More informationOSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
More informationMETRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationBS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationRosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationSeries 200 Double-Spiral Tube Brushes...Powered Use
Series 200 Double-Spiral Tube Brushes...Powered Use Series 200 Brushes are beefed up to withstand the rigors of being driven by power tools, drills and drill presses. Handles are double-strand heavy-gauge
More information