MYFM2 WIRELESS FM TRANSMITTER USER MANUAL. kitsound.co.uk

Transcription

1 kitsound.co.uk All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Your product and batteries must be recycled or disposed of properly. Please contact your local recycling centre for more information on proper disposal. MYFM2 WIRELESS FM TRANSMITTER JB a / Made in China. KitSound is a trademark of Kondor Ltd, Christchurch, Dorset, BH23 4FL, UK. USER MANUAL

2 Please read this manual carefully before use. Box contents KS MyFM2 Wireless FM Transmitter User manual Functions 1. LCD 2. Connectivity LED 3. Channel down (CH ) 4. Channel up (CH+) 5. MFB (Multi-Function Button) 6. USB charge output 7. Standby LED 8. Aux port 9. Microphone Instructions for use Getting started 1. Insert the MyFM2 into the 12/24 V socket in your vehicle 2. With your vehicle turned on, the MyFM2 LCD (1) will be showing a radio frequency and the Standby LED (7) will be solid red Standby/Power off The MyFM2 will go into sleep mode if no connection is made within 3 minutes and will power off completely if no connection is made within 12 minutes. To manually power off, long press MFB (5) and the LCD (1) will turn blank. Connecting to FM It is advised to find an Open FM frequency, not already being used by a radio station. 1. Find an empty FM radio frequency on your car stereo 2. Change the frequency on the MyFM2 to match the one on your car stereo by using Channel down (3) or Channel up (4). Short press to slowly scan and hold down to quickly scan 2 3

3 Pairing to a wireless device 1. Once connected to power, the MyFM2 will automatically enter pairing mode and the Connectivity LED (2) will flash blue and red 2. Turn on your ios, Android, or Windows device s Bluetooth ON and search for new devices 3. Select KS MYFM2 from the list of found devices 4. If asked for a passcode, enter 0000 or 1234 and the MyFM2 will then be connected to your device 5. After pairing successfully, the Connectivity LED (2) will be solid blue Note: the MyFM2 will automatically connect to a previous device once turned off when in range. Note: Bluetooth is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated with or endorsed by Bluetooth SIG Inc. Re-pairing or pairing new devices 1. Turn off Bluetooth connectivity on any previously paired devices 2. Follow the Pairing to a wireless device instructions 3. If a previously paired device is not present within the wireless connectivity range then the speaker will re-enter pairing mode Call handling Answer a call When a call comes through, short press MFB (5) End call During a call, short press MFB (5) Re-dial Whilst not in a call, short press MFB (5) twice Playing music Play/Pause Short press MFB (5) to play/pause 4 5

4 Aux connection 1. Once connected to power and a radio frequency, plug an aux cable into the Aux port (8) and the MyFM2 will automatically go into aux mode 2. The Connectivity LED (2) will slowly flash blue Note: While in aux mode, call handling and play/pause will be disabled. Guidance & General Safety Instructions Due care and attention is required when driving a motor vehicle. The operation of any device whilst driving may cause a lack of attention, and pose a hazard to other road users. Please follow general safety guidelines before and when using any connected device. Do not attempt to connect your product whilst driving. Ensure your product fits correctly and securely into the power outlet socket before driving. Do not attempt to adjust or tune your music device whilst vehicle is in motion or operating the controls of the vehicle. Do not insert any objects other than the correct adaptor into the power outlet without disconnecting the battery of the vehicle. We do not assume any responsibility for personal injury, or damage incurred due to misuse, or safe operating of devices connected to your vehicle or the vehicle s power outlet. Please drive carefully. 6 7

5 Care for your MyFM2 Please DON T: Get the MyFM2 wet Drop the MyFM2 as this will invalidate your warranty Open up the MyFM2. There are no user serviceable parts inside Expose the MyFM2 to extreme temperatures or rapid changes of hot to cold or vice versa Please DO: Clean the MyFM2 with a soft dry cloth and no detergents Specifications Works with Bluetooth V3.0 Wireless connectivity range FM frequency response USB output Dimensions Weight up to 10 m MHz 5 V / 2.1 A H36 x W36 x D73 (mm) 30 g 8 9

6 Troubleshooting We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: Hereby, Kondor Ltd declares that the radio equipment type, KSMYFM2 Wireless FM Transmitter, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The use and operation of this transmitter is beyond our control. Warranty of the MyFM2 is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery. This may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development