MINI BUDDY portable speaker

Transcription

1 kitsound.co.uk MINI BUDDY portable speaker JB / Made in China. KitSound 2015 USER Manual Christchurch, Dorset, BH23 4FL, UK 1 1

2 We are craftspeople. We are musicians. We are KitSound And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We ll settle for nothing less. 2 3

3 At KS we believe your music deserves to be showcased on great quality products that don t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that s worth celebrating. 4 5

4 Box contents Mini Buddy Portable Speaker USB charge cable Keyring attachment Instruction manual Charging the battery The Mini Buddy has a built-in rechargeable lithium battery. Before charging, make sure that the Mini Buddy is switched off. Connect one end of the USB power cable to the charging port of the Mini Buddy and connect the other end to your PC or USB mains adaptor. The battery will start charging automatically. 6 7

5 Note: It takes 3 hours to fully charge the battery Whilst charging, the LED will show blue When fully charged, the LED will not change colour. However a 3 hour charge is sufficient to fully charge the battery Using the speaker 1. plug the 3.5 mm cable that is attached to the Mini Buddy into the 3.5 mm socket of your device 2. Switch on the speaker 3. Use your connected device to play music/video and to control volume level 8 9

6 Buddy pairing If you have more than one Mini Buddy speaker, you can pair them together for greater sound. To do this: Connect the 3.5 mm cable from one Mini Buddy speaker to the 3.5 mm socket on another Mini Buddy speaker. This can be repeated as many times as you like Connect the remaining 3.5 mm cable to your device to play your music/video s through all connected Mini Buddies Other information Your device will have an internal amplifier and if it is playing digital files like MP3 s it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this and get the best quality from the speaker, we recommend you do not run your device any higher than 95% volume. Some devices output higher than others so you may need to reduce the volume if you experience distortion

7 Care and maintenance Wipe the unit with a soft dry dust cloth. Do not use any wax, spray polish or abrasive cleaners on them. Caution: Never allow any water or other liquids to get inside the unit while cleaning. Specifications Frequency response: 100 hz 20 khz Driver unit: 36 mm Impedance: 4 ohms Battery type: Li-Po rechargeable Jack plug: 3.5 mm Troubleshooting We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: support@kitsound.co.uk 12 13

8 The use and operation of this speaker is beyond our control. Warranty of the Mini Buddy is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development