Connect cameras to the monitor

Transcription

1 STEP SETTING UP YOUR MONITOR FIRST FLAT SCREEN CRT/DVR OBSERVATION SYSTEM WITH 4 NIGHT VISION CAMERAS Connect cameras to the monitor 4 Color cameras are included with the Observation System. These cameras have a single cable, and receive power directly from the Observation System. 0:00 STEP SHOULD TAKE APPROXIMATELY 5-0 Connect one end of the ethernet cable to a broadband router (not included) and the other end to the back of the monitor.. Connect the female end of the supplied 57 extension cable to the camera. Connect the male end of the supplied 57 extension cable to an open DIN channel on the back of the Observation System. Continue connecting additional DIN cameras. Package Contents ROUTER (NOT INCLUDED) - Color Monitor with Built-in Digital Video Recorder - Set up CD Rom (placed inside the owner s manual) - 60 GB Hard Disk Drive (installed inside hard drive bay) - Owner s Manual - Remote Control with batteries - Quick Installation Guide 4 - Colour cameras with sunshade housing - Power Cord 4 - Camera brackets with mounting screws - keys (for Hard Drive Bay) 4-00ft (0m) Extension Cables for camera - Network Viewer Guide - 0ft (m) Ethernet network cable - Warning Decals - Broadband Router and Computer Required, not Included Connect one end of the power adapter (standard power cable) to the monitor, the other end to an electrical outlet. 4 Turn the Master power switch located at the back of the monitor ON. Version.0 5 Press the Standby button to view picture images. Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page NOTE: The arrow mark on top of the 6 PIN camera cable(s) should face UP while inserting the 6 PIN camera cable(s) to the Monitor s 6 PIN connector(s). FRONT OF THE MONITOR

2 STEP SET UP LOCAL VIEWING ON YOUR PC Press the ENTER button on the remote control (ensure batteries are inserted) *** MASTER HDD DETECT *** POWER ON CHECK _OK HDD IDENTIFY CHECK _ OK SYSTEM CHECK.. 0:00 STEP SHOULD TAKE APPROXIMATELY 5-0 Record the digit IP and the digit MAC Addresses HDD R/W CHECK _OK MODEL : XXXXXXXXXXXXXXXXXXXXXX HDD LBA : XXXXXXXXXXXXXXXXXXXXXX IP ADDRESS : HDD SPACE : 60 GB 00 %... (record the period. It is part of the IP Address) *** NETWORK INFORMATION *** MAC ADDRESS : XX XX XX XX XX XX DYNAMIC IP REQUEST.. OK IP ADDRESS : SUBNET MASK : GATEWAY : PORT : 5000 MAC ADDRESS : Insert the network video CD software into the computer s CD ROM drive 4 Select the netviewer option 6 Double-click the Netviewer icon on your desktop to run the program (DO NOT record the colon (:)) On your Local Computer COMPUTER NOT INCLUDED 5 Close the CD Menu Screen. A Netviewer icon and a Local Player icon will appear on your desktop Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page Version.0

3 STEP SET UP LOCAL VIEWING ON YOUR PC - CONTINUED 7 8 Click the Set-up icon 0:00 Enter the Set-up information followed by clicking OK STEP SHOULD TAKE APPROXIMATELY 5-0 Enter the IP Address recorded in Step -. Enter the DVR/Monitor port (5000 by default) Enter the User ID (admin by default), max. 5 characters Select NTSC NETVIEWER SCREEN SET-UP ICON 9 0 Click the connect icon button Enter your User Name and Password (It is recommended that admin be used for both ID & Password) as the default setting. Press the OK button admin admin NETVIEWER SCREEN View video images from your computer NETVIEWER SCREEN Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page Version.0

4 STEP SET UP INTERNET REMOTE SECURITY MONITORING Port Forward (to the IP of the monitor recorded in Step - of this guide) your Router FIRST before proceeding with the Set-up (you must Port Forward Port 5000, 500 & , Enter ddns.strategicvista.net in the address bar 4 Complete new account information 40:00 STEP SHOULD TAKE APPROXIMATELY Refer to your Router s manual for specific instructions on port forwarding (or) Check the Router configuration guide support document in the consumer guide section on our website Click Create Account option.. FOR PRODUCT LICENSE select the SGFD044-6 option from the drop down menu.. FOR PRODUCT CODE enter the monitor s MAC address (recorded in step, section ).. FOR URL REQUEST enter a unique URL name (eg. Create Account Johndoe). Note: An URL name should not be more than 8 characters. 5 An Automated Registration Confirmation will be sent to your . Print and Save this Registration Confirmatio. Service Provider: ddns.strategicvista.net Domain name: house.strategicvista.net User name: John Doe Password: <leave this field blank> Use Public IP to Register: Yes 6 Enter DDNS SET option on your monitor by pressing the Menu button on your remote control. Use the arrow buttons to highlight DDNS Set. Press the Enter Button MAIN MENU TIME/DATE SET SEQUENCE SET TITLE SET ALARM SET MOTION SET SYSTEM (I) SYSTEM (II) HDD/REC SET ALARM REC SCHEDULE MONITOR SET FIRMWARE DDNS SET Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page Version.0

5 STEP SET UP INTERNET REMOTE SECURITY MONITORING - CONTINUED 7 Set the DDNS Settings Use the UP, DOWN, LEFT, RIGHT and ENTER keys located at the front of the monitor to set DDNS Settings. Ensure the domain name matches the name sent to you via (Note: Do not enter strategicvista.net extension to the user name) DDNS: Select YES DDNS DDNS: Y DOMAIN NAME house USER NAME John Doe USER PASSWORD ROUTER Y RETURN EXIT DDNS STATUS OK Domain Name: Enter the Domain Name sent to you in the registration confirmation (Section -5). 8 User Name: Enter the User Name sent to your in the registration confirmation (Section -5). 40:00 STEP SHOULD TAKE APPROXIMATELY Install the Net Viewer video CD software into your Remote Computer User Password: Leave blank On your Router: Yes Remote Computer Scroll to return and press enter. Enter the DDNS set option and verify that the DDNS STATUS is OK. COMPUTER NOT INCLUDED 9 Select the Netviewer option and follow the dialog boxes to guide you through installation 0 Close the CD Menu Screen. A Netviewer icon and a Local Player icon will appear on your desktop Double-click the Netviewer icon on your desktop to run the program Click the Set-up icon SET-UP ICON Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page Version.0

6 STEP SET UP INTERNET REMOTE SECURITY MONITORING - CONTINUED 4 Enter the Setup information field followed by clicking OK. Click the Connect icon followed by entering the User name and Password (admin by default). Press OK. 40:00 STEP SHOULD TAKE APPROXIMATELY View the video picture remotely. Enter the Domain Name sent to you in the Registration Confirmation (Section -5) followed by.strategicvista.net (eg. house. strategicvista.net) Enter 5000 by default Enter admin by default Select NTSC by default REFER TO YOUR OWNER S MANUAL TO LEARN MORE ABOUT THE DIFFERENT FEATURES AND OPTIONS AVAILABLE WITH THIS SYSTEM It s all on the web Product Information Specification Sheets User Manuals Software Updates Quick Start Guides Firmware Upgrades FOR ADDITIONAL INFORMATION OR TROUBLESHOOTING HELP, REFER TO YOUR OWNERS MANUAL FOR ASSISTANCE. YOU CAN ALSO CALL OR FOR FURTHER SUPPORT. TOLL FREE TECHNICAL SUPPORT: LOREX ( ) SUPPORT: SUPPORT@LOREXTECHNOLOGY.COM WEBSITE: Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE 006 LOREX. All rights reserved. SGFD044-6 Page Version.0