지원기종 : NAIS (Matsushita) FP series include FP-X, FP-Σ, FP0, FP1, FP2, FP2SH, FP10SH and FP3 Ethernet support FP-X with AFPX-COM5.

Transcription

1 Panasonic FP 지원기종 : NAIS (Matsushita) FP series include FP-X, FP-Σ, FP0, FP1, FP2, FP2SH, FP10SH and FP3 Ethernet support FP-X with AFPX-COM5. Website: [ 편집 ]->[ 시스템파라미터 ]->[ 디바이스설정 ] 에서아래의사항을설정합니다. HMI 설정 : 파라미터권장사항선택사항참조 PLC 기종 Panasonic FP PLC I/F RS232 RS232/RS485 통신속도 , 19200, 38400, 데이터비트 8 7 or 8 패리티 Odd Even, Odd, None 정지비트 1 1 or 2 PLC 국번 Must match the PLC port setting. FP3 must set to 0. 디바이스주소 : Bit/Word Device type Format Range Memo B X DDDDh 0 ~ 9999f Input (X) B Y DDDDh 0 ~ 9999f Output (Y) B R DDDDh 0 ~ 9999f Internal Relay (R) B L DDDD 0 ~ 9999 Link Relay (L) B L_Bit DDDDh 0 ~ 9999f B T DDDD 0 ~ 9999 Timer (T) B C DDDD 0 ~ 9999 Counter (C) W SV DDDD 0 ~ 9999 Timer/Counter Set Value (SV) W EV DDDDD 0 ~ Timer/Counter E lapse V alue W DT DDDDD 0 ~ Data Register (DT) W LD DDDD 0 ~ 8447 Link Register (LD) W WX DDDD 0 ~ 9999 Input (WX) (read only) W WY DDDD 0 ~ 9999 Output (WY)

2 Bit/Word Device type Format Range Memo W WR DDDD 0 ~ 9999 Internal Relay (WR) W WL DDDD 0 ~ 9999 Link Relay (WL) W FL DDDDD 0 ~ File Register (FL) 결선도 : 기종과연결단자를확인하십시오. FP0, FP2, FP2SH, FPM CPU : 9P D-Sub to 5P Mini-DIN emt3000 series COM 3 RS232 9P D- RS232 5P Mini-DIN Male 2 RX 8 RX 2 TXD 3 TX 7 TX 3 RXD 5 GND cmt/mtv series RS232 5P Mini-DIN Male 2 RX 2 TXD 3 TX 3 RXD MT8000iE series RS232 5P Mini-DIN Male 2 RX 2 TXD 3 TX 3 RXD

3 MT6000/8000 series (MT6050i/MT8050i은아래의결선도를참조하십시오.) COM2 RS232 9P D- COM3 RS232 9P D- RS232 5P Mini-DIN Male Sub Male 2 RX 6 RX 8 RX 2 TXD 3 TX 4 TX 7 TX 3 RXD 5 GND 5 GND MT6050i/MT8050i RS232 5P Mini-DIN Male 9 RX 2 TXD 6 TX 3 RXD 기종과연결단자를확인하십시오. FP0 CPU : 9P D-Sub to 3P Terminal: emt3000 series COM 3 RS232 9P D- RS232 3P Terminal 2 RX 8 RX S 3 TX 7 TX R 5 GND 5 GND G

4 cmt/mtv series RS232 3P Terminal 2 RX S 3 TX R 5 GND G MT8000iE series RS232 3P Terminal 2 RX S 3 TX R 5 GND G MT6000/8000 series (MT6050i/MT8050i은아래의결선도를참조하십시오.) COM2 RS232 9P D- COM3 RS232 9P D- RS232 3P Terminal Sub Male 2 RX 6 RX 8 RX S 3 TX 4 TX 7 TX R 5 GND 5 GND 5 GND G MT6050i/MT8050i RS232 3P Terminal 9 RX S 6 TX R 5 GND G

5 기종과연결단자를확인하십시오. emt3000 series COM 3 RS232 9P D- RS232 9P 2 RX 8 RX 2 TXD 3 TX 7 TX 3 RXD 5 GND 4 RTS 5 CTS 8 CD 9 ER cmt/mtv series RS232 9P 2 RX 2 TXD 3 TX 3 RXD 4 RTS 5 CTS 8 CD 9 ER

6 MT8000iE series RS232 9P 2 RX 2 TXD 3 TX 3 RXD 4 RTS 5 CTS 8 CD 9 ER MT6000/8000 series (MT6050i/MT8050i은아래의결선도를참조하십시오.) COM2 RS232 9P D- COM3 RS232 9P D- RS232 9P Sub Male 2 RX 6 RX 8 RX 2 TXD 3 TX 4 TX 7 TX 3 RXD 5 GND 5 GND 4 RTS 5 CTS 8 CD 9 ER MT6050i/MT8050i RS232 9P 9 RX 2 TXD 6 TX 3 RXD 4 RTS 5 CTS

7 8 CD 9 ER 기종과연결단자를확인하십시오. FP1 CPU : 9P D-Sub to 8P MiniDIN emt3000 series RS485 4W 8P Hirose Male 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB cmt/mtv series COM2 RS485 4W 9P RS485 4W 8P Hirose Male D-Sub FeMale 7 RX- 2 TXDA 6 RX+ 5 TXDB 9 TX- 3 RXDA 8 TX+ 6 RXDB MT8000iE series RS485 4W 8P Hirose Male

8 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB MT6000/8000 series (MT6050i/MT8050i은아래의결선도를참조하십시오.) RS485 4W 8P Hirose Male 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB MT6050i/MT8050i RS485 4W 8P Hirose Male D- 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB

9 기종과연결단자를확인하십시오. FP3 CPU : 9P D-Sub to 15P D-Sub emt3000 series RS485 4W 15P D-Sub Mal e 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB 4 RTS+ 5 CTS+ 11 RTS- 12 CTS cmt/mtv series COM2 RS485 4W 9P D-Sub FeMale RS485 4W 15P D-Sub Mal e 7 RX- 9 TXDA 6 RX+ 2 TXDB 9 TX- 10 RXDA 8 TX+ 3 RXDB 4 RTS+ 5 CTS+ 11 RTS- 12 CTS MT8000iE series RS485 4W 15P D-Sub Mal

10 e 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB 4 RTS+ 5 CTS+ 11 RTS- 12 CTS- MT6000/8000 series (MT6050i/MT8050i은아래의결선도를참조하십시오.) RS485 4W 15P D-Sub Mal e 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB 4 RTS+ 5 CTS+ 11 RTS- 12 CTS

11 MT6050i/MT8050i D- RS485 4W 15P D-Sub Mal e 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB 4 RTS+ 5 CTS+ 11 RTS- 12 CTS 드라이버버전 : 버전날짜설명 V1.80 Apr/09/2010 Added registers: FL