Wirewound Resistors, Industrial Power, Silicone Coated, Adjustable Tubular

Transcription

1 Wirewound Resistors, Industrial Power, Silicone oated, djustable Tubular FETURES High temperature silicone coating omplete welded construction Tight tolerance of 5 % for values above 1 Excellent stability in operation (< 3 % change in resistance) Material categorization: for definitions of compliance please see STNDRD ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W RESISTNE RNGE RESISTNE RNGE WEIGHT (typical) g ± 5 % ± 10 % to 10.2K 1.0 to 10.2K to 10.2K 1.0 to 10.2K to 18K 1.0 to 18K HL to 60K 0.10 to 60K to 23K 1.0 to 23K to 30K 1.0 to 30K to 24K 1.0 to 24K to 57K 1.0 to 57K to 75K 1.0 to 75K to 84.3K 1.0 to 84.3K to 85.5K 1.0 to 85.5K to 114K 1.0 to 114K HL to 111K to 132K 1.0 to 132K to 192K 1.0 to 192K to 398K 1.0 to 398K HL to 398K to 337K 1.0 to 337K to 337K 1.0 to 337K Revision: 30-ug-16 1 Document Number: 31852

2 GLOL PRT NUMER INFORMTION Global Part Numbering example: R00JE (visit SP parts manual for all options) S T E 2 5 R 0 0 J E GLOL (6 digits) (see Standard Electrical Specifications Global Model column for options) TERMINL DESIGNTION (2 digits) F = ferrule cap TERMINL FINISH (1 digit) E = lead (Pb)-free VLUE (5 digits) R = decimal K = thousand 1R500 = 1.5 1K500 = 1.5 k TOLERNE (1 digit) J = ± 5 % K = ± 10 % Historical Part Number example: % % PKGING ODE (1 digit) E = lead (Pb)-free cell and bulk pack SPEIL (up to 2 digits) (dash number) from 1 to 99 as applicable 91 = 100 style horizontal high bracket 92 = 200 style push-in bracket 93 = 300 style thru-bolt bracket T = center tap NI = non-inductive NP = non-inductive + 92 style push-in bracket NH = non-inductive + 91 style horizontal bracket NV = non-inductive + style vertical bracket HISTORIL RESISTNE VLUE TOLERNE SPEIL Revision: 30-ug-16 2 Document Number: 31852

3 DIMENSIONS in inches (millimeters) TERMINL SETK DISTNE ENTER TO ENTER O.D. I.D. LENGTH (MX.) (10.31) (17.48) (19.56) (17.48) (17.48) (33.34) (33.35) (33.35) (33.34) (33.35) LENGTH (44.45) (38.10) (101.6) (101.6) (114.3) (152.4) (152.4) (101.6) (165.1) (165.1) (215.9) (215.9) 1 (266.7) ORE DIMENSIONS O.D. ± (11.13) (11.11) (15.88) I.D. ± (4.78) (6.60) (7.94) (12.7) (11.51) (13.89) TERMINL SETK ± (2.38) (1.57) (3.18) (5.56) (3.18) (7.16) (6.78) (5.56) (6.76) DISTNE ETWEEN TERMINLS (REF.) (34.93) (41.28) (23.80) (39.67) (39.67) (39.67) (90.47) (92.10) (101.60) (141.27) (141.27) (71.42) (152.40) (136.50) (188.06) (185.72) (238.91) TERMINL DESIGNTION STNDRD OPTIONL (QUIK ONNET) SLIDER NUMER TERMINL DIMENSIONS in inches (millimeters) Style 05, 06, and 20 D Styles 14 and 15 D DIMENSIONS (HOLE DIMETER) D TERMINL STYLE (14.27) (5.18) (4.76) (9.98) (3.38) (4.76) (9.98) (3.38) (4.36) (4.76) (14.29) (1.27) (15.08) (1.65) Revision: 30-ug-16 3 Document Number: 31852

4 VT SLIDERS-DIMENSIONS in inches (millimeters) Hole dia. Width Height Note (1) Order HEI slider with global part number. MOUNTING HRDWRE FOR VT PRODUTS - Dimensions in inches (millimeters) 91 = 100 Style Horizontal 1 High racket GLOL PRT NUMER (1) (RoHS OMPLINT) GLOL PRT NUMER FOR EXTR SLIDERS SLIDER TYPE WIDTH 93 = 300 Style Thru-olt racket DIMENSIONS HEIGHT HOLE DIMETER E29 010, (4.75) (13.11) (3.18) E E E29 025, 25, 050, 50, , 50, 75, , 160, 200, (18.26) (3.58) (21.44) (3.58) (7.92) (20.24) (4.32) (1.17) ore length plus X H RKET TYPE X Y Z H (26.99) (26.99) (26.99) (31.75) (24.13) (21.83) (25.40) MOUNTING SLOT x (25.40) (5.56 x 11.11) x (31.75) (5.56 x 11.11) x (38.10) (7.14 x 14.29) (23.55) (34.93) (44.45) (53.98) RKET X TYPE (PPROXIMTE) THRED (9.47) 8 to (6.88) 10 to (11.76) 1/4 to = 200 Style Push-In racket RKET TYPE Y Z X H Y Z (12.14) (14.80) (17.78) (21.49) (21.49) (17.78) (21.49) (14.73) (14.68) (20.32) (20.62) (20.62) ore length plus X (3.175) (4.78) (11.68) (15.24) (15.24) (17.45) (15.24) H HOLE (DI.) (4.32) (2.92) (3.96) x (8.71 x 5.46) x (8.71 x 5.46) x (6.35 x 4.78) x (8.71 x 5.46) MOUNTING HRDWRE GLOL VILLE RKET TYPES Y 91 = 100 STYLE HORIZONTL 1 HIGH RKET 92 = 200 STYLE PUSH-IN RKET 93 = 300 STYLE THRU-OLT RKET Revision: 30-ug-16 4 Document Number: 31852

5 TEHNIL SPEIFITIONS PRMETER UNIT RESISTOR HRTERISTIS Power Rating W 12 to 225 Resistance Range 1 to 398K Resistance Tolerance % 5, 10 Temperature oefficient ppm/ ± 260 for 20 and above, ± 400 for 1 to Operating Temperature -55 to 350 Temperature Rise 325 above an ambient of 25 Maximum ltitude f.a.s.l Short-Term Overload - 10x rated power for 5 s Surge Windings vailable Maximum Working Voltage - (P x R) 0.5 Insultation Resistance 1M Dielectric Voltage V RMS 1000 V reepage Varies by wattage, see Terminal Setback in Dimensions table Terminal Sleeves n/a Inductance μh Varies by wattage and resistance Non-Inductive Winding vailable Terminal Strength lb 10 lbs Electrical or Mechanical ustomization ontact factory: ww2dresistors@vishay.com MTERIL SPEIFITIONS Element opper-nickel alloy or nickel-chrome alloy, depending on resistance value ore ordierite, steatite oating Special high temperature silicone Standard Terminals Tinned alloy 42 Optional Terminals lloy 42 Terminal ands lloy 42 Part Marking HEI, model, wattage, value, tolerance, date code DERTING RTED POWER IN % MIENT TEMPERTURE IN Revision: 30-ug-16 5 Document Number: 31852

6 Legal Disclaimer Notice Vishay Disclaimer LL PRODUT, PRODUT SPEIFITIONS ND DT RE SUJET TO HNGE WITHOUT NOTIE TO IMPROVE RELIILITY, FUNTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISHY INTERTEHNOLOGY, IN. LL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000