5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Transcription

1 Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V RoHS compliant package Mechanical Data Case : Void-free molded plastic body Epoxy : UL94V-0 rate flame retardant Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed Polarity : Color band denotes cathode end Graphic symbol Mounting position : Any Weight : 2.1 gram Packing & Order Information 500/T MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified. Symbol Parameter Value Unit PPK Peak Pulse Power Dissipation at tp=1 ms (Note1,Fig. 4) Minimum 500 W PD Steady State Power Dissipation at TL=75 C Lead Lengths 0.375, (9.5mm) (Fig. 2) 8.0 W IFSM Peak Forward Surge Current, 8.3 ms single half Sine-Wave Superimposed on Rated Load 400 A (JEDEC Method) (Note3) TJ,Tstg Operating Junction and Storage Range - 55 to C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on Copper Leaf of 0.79 in 2 (20mm 2 ) (3) Measured on 8.3 ms, single half sine-wave or equivalent square wave, duty cycle=4 pulses per minutes maximum. Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

2 Peak Pulse Clamping 5KP KP5.0A KP KP6.0A KP KP6.5A KP KP7.0A KP KP7.5A KP KP8.0A KP KP8.5A KP KP9.0A KP KP10A KP KP11A KP KP12A KP KP13A KP KP14A KP KP KP Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

3 Peak Pulse Clamping 5KP16A KP KP17A KP KP18A KP KP20A KP KP22A KP KP24A KP KP26A KP KP28A KP KP30A KP KP33A KP KP36A KP KP40A KP KP43A KP KP45A KP KP48A Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

4 Peak Pulse Clamping 5KP KP51A KP KP54A KP KP56A KP KP58A KP KP60A KP KP64A KP KP70A KP KP75A KP KP78A KP KP85A KP KP90A KP KP100A KP KP110A KP KP120A KP Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

5 Peak Pulse Clamping 5KP150A KP KP160A KP KP170A KP KP180A Note : (1) VBR measured after IT applied for 300μs, IT= square wave pulse or equivalen. (2) Surge Current waveform per Fig.3 and Derate per Fig.2 (3) VF=3.5 Volts max. for devices of VR<100 V, and VF=5 Volts max. for devices of VR>100 V (4) For Bi-directional devices having VR of 10 Volts and under the IR limit is doubled. Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

6 RATING AND CHARACTERISTIC CURVES ( 5KP SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016

7 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Bruckewell ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [] Bruckewell Technology Corporation Rev. A -2016