Domae and Qwikline ll. Consumer units

Transcription

1 Domae and Qwikline ll Consumer units

2 Features and benefits Contents The range overview 3 Domae consumer units 4 Features and benefits 5 Quick selector - reference numbers & descriptions 6 Consumer unit - dimensions & technical data 8 Devices - technical data 9 Qwikline ll consumer units 10 Features and benefits 11 Quick selector - reference numbers & descriptions 12 Standard consumer units - technical data 14 Split load consumer units - technical data 15 Dual/multi tariff consumer units - technical data 16 Devices - technical data 17 Insulated units - detailed dimensions 18 Metal units - detailed dimensions 19 RSD 20 Loose insulated IP40/54 enclosures & RCDs 20 Other Square D products 22

3 Square D consumer units Square D, a brand of Schneider Electric is a market leader in the design and manufacture of British Standard consumer units. Supported by a network of nation wide stockists, Square D is now able to provide two dramatically different styles of consumer units, Domae and Qwikline II. Suitable for installation in domestic dwellings, schools, colleges etc., both offers provide high levels of quality and installer flexibility. 3

4 Domae consumer units The Domae range of consumer units offers the ultimate in terms of onsite flexibility at a very affordable price. There are no bespoke split load consumer units, however any Domae enclosure can be taken and used with a single incomer or converted to a split load board with the minimum of effort. A wide range of RCD protected and unprotected ways is possible and a standard board can be converted to a split load type at any time in the future. In terms of safety Domae offers a wide range of protective devices and installer safety is maximised via a busbar shield which, once fitted, can only be removed with the use of a tool. Domae is now available with insulated or metal enclosures. 4

5 Domae consumer unit Features and benefits Highly flexible - any Domae consumer unit can be used with a single main incomer or used as a split load board Configurable on site - choose the split of protected or unprotected RCD ways. Standard single incomer boards can be converted to split load at a later date Ideal for rewire applications - right hand incomer for easier installation where existing incoming cables fall on the right Controls flexibility - control devices can be easily installed within the same enclosure Additional installer safety - the busbar shield is firmly held in place when fitted and requires a tool to remove Value for money - backed by the Square D brand you can be assured that Domae is a cost effective and quality solution 5

6 Domae - quick selector Select consumer unit Insulated units Metal units Ref. no. No. ways Ref. no. No. ways DOM2CU 2 DOM2MCU 2 DOM4CU 4 DOM4MCU 4 DOM6CU 6 DOM6MCU 6 DOM8CU 8 DOM8MCU 8 DOM12CU 12 DOM12MCU 12 DOM16CU 16 DOM16MCU 16 Select incoming device Main incoming devices Ref. no. Description Rating DOM63SW Switch Disconnector 63A DOM100SW Switch Disconnector 100A DOM63R30 RCCB (RCD) 63A 30mA DOM80R30 RCCB (RCD) 80A 30mA For split load applications select a split load kit Split load kits [includes cables & RCCB (RCD)] Ref. no. Description Rating DOM63R30KIT2 RCCB & cables 63A 30mA DOM80R30KIT2 RCCB & cables 80A 30mA Select outgoing devices or accessories SP MCBs (B curve) Ref. no. Description Rating DOM03B6 MCB (B curve) 3A DOM06B6 MCB (B curve) 6A DOM10B6 MCB (B curve) 10A DOM16B6 MCB (B curve) 16A DOM20B6 MCB (B curve) 20A DOM32B6 MCB (B curve) 32A DOM40B6 MCB (B curve) 40A DOM45B6 MCB (B curve) 45A DOM50B6 MCB (B curve) 50A SP MCBs (C curve) DOM06C6 MCB (C curve) 6A DOM10C6 MCB (C curve) 10A DOM16C6 MCB (C curve) 16A SP MCBs (C curve) DOMLKIT DOMEARTHKIT DOM16BKIT Door lock kit (for metal boards only) Additional earth terminals for clean earth or high integrity earthing Replacement/spare main busbar 6

7 Domae - ready to install consumer unit packages Domae ready to install consumer unit packages are supplied complete with enclosure, incoming and outgoing devices and all internal connections required. Order 1 part number then simply fix, connect, test and energise. Select consumer unit package Pre-assembled ready to install consumer unit packages Ref. no. Description Typical application SHOWER6340D 2 way enclosure + 63A 30mA RCCB & 40A MCB Electric shower supply SHOWER6345D 2 way enclosure + 63A 30mA RCCB & 45A MCB Electric shower supply GARAGE63D 2 way IP55 enclosure + 63A RCD, 6A & 16A MCB Electricity supply to a garage or shed KITBOXD 12 way enclosure, Switch, 63A 30mA RCCB kit, General residential rebuild 3x6A MCBs, 2x16A MCBs, 4x32A MCBs, 1x40A or rewire MCB KITBOXD80 12 way enclosure, Switch, 80A 30mA RCCB kit, General residential rebuild 3x6A MCBs, 2x16A MCBs, 4x32A MCBs, 1x40A or rewire MCB GARAGE63D KITBOXD 7

8 Domae consumer units - dimensions & technical data Insulated units Ref. no. No. ways Height Dimensions mm Depth (width) DOM2CU DOM4CU DOM6CU DOM8CU DOM12CU DOM16CU Metal units Ref. no. No. ways Height Dimensions mm Depth (width) DOM2MCU DOM4MCU DOM6MCU DOM8MCU DOM12MCU DOM16MCU Note: Incoming and outgoing devices must be selected separately from the devices section. Incoming devices available * Switch disconnector 63A & 100A * RCCB s 63A/30mA 80A/30mA Max. busbar splits 8 way 2+4 to way 4+6 to way 6+8 to 8+6 Technical data Max. busbar current (A) Max. operating voltage Max. cable capacity Certification 100A 50Hz 25 mm 2 (earth & neutral bars) BSEN Fully configurable shrouded busbars Lockable cover option on metal units 8

9 Domae - device & technical data Incoming devices - selection & technical data Ref. no. Description No. Current rating Operating Max. cable Standards poles voltage.v Cap. mm 2 approval DOM63SW Switch 2 63A 230/ BSEN DOM100SW Switch 2 100A 230/ BSEN DOM63R30 RCCB 2 63A 30mA 230/ BSEN61008 DOM80R30 RCCB 2 80A 30mA 230/ BSEN61008 Select incoming device Intermediary RCCB (RCD) kits Ref. no. Description No. Current rating Operating Max. cable Standards poles voltage.v Cap. mm 2 approval DOM63R30KIT2 RCCB 2 63A 30mA 230/ BSEN61008 DOM80R30KIT2 RCCB 2 80A 30mA 230/ BSEN61008 Outgoing 6kA MCBs Select incoming device Ref. no. Description No. Current rating Operating Max. cable Standards poles voltage.v Cap. mm 2 approval DOM03B6 MCB 1 3A B Curve 230/ BSEN60898 DOM06B6 MCB 1 6A B Curve 230/ BSEN60898 DOM10B6 MCB 1 10A B Curve 230/ BSEN60898 DOM16B6 MCB 1 16A B Curve 230/ BSEN60898 DOM20B6 MCB 1 20A B Curve 230/ BSEN60898 DOM32B6 MCB 1 32A B Curve 230/ BSEN60898 DOM40B6 MCB 1 40A B Curve 230/ BSEN60898 DOM45B6 MCB 1 45A B Curve 230/ BSEN60898 DOM50B6 MCB 1 50A B Curve 230/ BSEN60898 DOM06C6 MCB 1 6A C Curve 230/ BSEN60898 DOM10C6 MCB 1 10A C Curve 230/ BSEN60898 DOM16C6 MCB 1 16A C Curve 230/ BSEN

10 Qwikline II consumer units The Qwikline II range of consumer units provides arguably the highest levels of residential circuit protection safety. A wide range of switch disconnectors, RCDs and MCBs is also complimented by an SP RCBO offer for maximum continuity of supply in the event of a fault. What really sets Qwikline II apart, is the plug-on breaker concept and fully encapsulated busbars. All outgoing devices can be connected in seconds and with no incoming terminal to tighten, the correct mechanical connection force is guaranteed every time. For unused ways, Qwikline II s unique fully encapsulated busbar system means that the highest levels of installer and end user protection are always guaranteed. Even with the front cover of the enclosure removed, the main busbar is protected to IP2X, meaning it remains finger safe but allows access with test probes by the installer. For energy management and safety Qwikline II can also accept a wide range of control devices. 10

11 Qwikline ll consumer unit Features and benefits Fully type tested to BS EN and CM16 tested Unrestricted cable entry can be made from any side Totally encapsulated busbar system. Provides complete finger safety to IP2XB, bringing new levels of safety to consumer unit design Incoming devices can be ordered separately giving over 1000 combinations from just 46 references Single pole RCBO. Tested to BS EN Unique MCB/RCBO fixing system. Retains plug-on philosophy for speed of installation and guaranteed connections. Provides the additional benefit of a rear clip which increases device security once plugged on Control devices may be installed on any outgoing way. No extra mounting accessories required Lockable cover option now available on metal units 11

12 Qwikline ll - quick selector Select consumer unit: insulated units Standard Split load Dual incomer Ref no. No. ways Ref no. No. ways Ref no. No. ways Cir A RCD ways Cir A RCD ways SQO2 2 SQOS2R4 2 4 SQO SQO4 4 SQOS3R3 3 3 SQO SQO6 6 SQOS4R2 4 2 SQO SQO8 8 SQOS4R6 4 6 SQO SQO12 12 SQOS5R5 5 5 SQO SQO16 16 SQOS6R4 6 4 SQO SQO23 24 SQOS7R3 7 3 SQO SQOS7R7 7 7 SQO Select consumer unit: metal units Standard Split load Dual incomer Multi tariff Ref No. Ref No.ways Ref No.ways Ref No.ways no. ways no. Cir A RCD ways no. Cir A RCD ways no. Cir A Cir B Cir C SQOM2 2 SQOMS4R6 4 6 SQOM SQOM SQOM4 4 SQOMS5R5 5 5 SQOM SQOM SQOM6 6 SQOMS6R4 6 4 SQOM SQOM SQOM8 8 SQOMS7R7 7 7 SQOM SQOM12 12 SQOM16 16 SQOM Note: Flush mounted standard metal consumer units are available by adding an F suffix to the above part numbers. e.g. SQOM2F = 2 way flush mounted unit. For flush mounting of split load, dual incomer and multi tariff boards use SQOFC12 for 10 mod. boards and SQOFC16 for 14 mod. boards Select incoming devices Incoming devices Ref. no. Description No. poles Current rating SQO1100M 2 pole switch disconnector 2 100A SQO1100L 2 pole terminal block 2 100A SQOE RCCB 2 100A, 30mA SQOE RCCB 2 100A, 100mA SQOE RCCB 2 100A, 300mA SQOE100100S RCCB 2 100A, 100mA TD SQOE RCCB 2 63A, 30mA SQOE RCCB 2 63A, 100mA Note: All Qwikline II consumer units are supplied without incoming devices. Any incoming device may be installed at the incoming point, or busbar split in any Qwikline II consumer unit. Requirements Standard units Dual incomer units Split load units Multi tariff units 1 incoming device required. 2 incoming devices required. 1 main incoming device and 1 busbar split device required. 3 incoming devices required. 12

13 Qwikline ll - quick selector Select outgoing devices MCBs (B curve) Ref. no. Description No. poles Curve type Current rating SQO103EB6 MCB 1 B 3A SQO106EB6 MCB 1 B 6A SQO110EB6 MCB 1 B 10A SQO116EB6 MCB 1 B 16A SQO120EB6 MCB 1 B 20A SQO125EB6 MCB 1 B 25A SQO132EB6 MCB 1 B 32A SQO140EB6 MCB 1 B 40A SQO150EB6 MCB 1 B 50A SQO163EB6 MCB 1 B 63A MCBs (C curve) Ref. no. Description No. poles Curve type Current rating SQO103EC6 MCB 1 C 3A SQO106EC6 MCB 1 C 6A SQO110EC6 MCB 1 C 10A SQO116EC6 MCB 1 C 16A SQO120EC6 MCB 1 C 20A SQO125EC6 MCB 1 C 25A SQO132EC6 MCB 1 C 32A SQO140EC6 MCB 1 C 40A SQO150EC6 MCB 1 C 50A SQO163EC6 MCB 1 C 63A RCBOs (B curve) Ref. no. Description No. poles Curve type Current rating SQOR106B03 RCBO (30mA) 1 B 6A, 30mA SQOR110B03 RCBO (30mA) 1 B 10A, 30mA SQOR116B03 RCBO (30mA) 1 B 16A, 30mA SQOR120B03 RCBO (30mA) 1 B 20A, 30mA SQOR132B03 RCBO (30mA) 1 B 32A, 30mA SQOR145B03 RCBO (30mA) 1 B 45A, 30mA Select control devices and accessories Control devices Ref no. Device Ways occupied CCN225 2P 25A contactor 1 CCN425 4P 25A contactor 2 CCN240 2P 40A contactor 2 CCN340 3P 40A contactor 3 CCN440 4P 40A contactor 3 CCN363 3P 63A contactor 4 CIR116 1P Impulse relay (16A) 1 CIR216 2P Impulse relay (16A) 1 CCR110 1P Changeover relay (10A) 1 CBL8 Bell (8V) 1 CBX8 Transformer 240-8V (8VA) 2 CBZ8 Buzzer (8V) 1 CLS110 Light sensitive switch 3.5 CTS24 Single pole time switch 1 CPT11 Single channel electrical time switch 2.5 CPT21 Dual channel electrical time switch 2.5 CDT116 1P Delay off timer 1 Accessories Note: All control devices are suitable for mounting in any Qwikline II consumer unit. SQODNBP DIN blanking plates 5 CPS9 Half mod spacer 0.5 QOEPLA Padlock device (suitable for use with all - Qwikline II devices) QOPL Padlock - DOMLKIT Door lock kit (metal units only) - 13

14 Qwikline ll - standard consumer unit technical data Insulated units Dimensions (mm) Ref. no. No. Ways Height Width Depth SQO SQO SQO SQO SQO SQO SQO Metal units Dimensions (mm) Ref. no. No. Ways Height Width Depth SQOM SQOM SQOM SQOM SQOM SQOM SQOM Note: Incoming and outgoing devices must be selected separately from the Qwikline ll devices section. Incoming devices available * Switch disconnector 100A * Terminal block 100A * RCCB s 63A/30mA, 63A/100mA, 100A/30mA, 100A/100mA, 100A/300mA 100A/100mA TD Incoming Switch disconnector Terminal block RCCB s - 100A - 100A - 63 or 100A/30mA, 100 or 300mA Outgoing MCB s RCBO s - B or C curve, 3-50A, 6kA - B curve 6-45A, 6kA Technical specification Metal Insulated Max. busbar current rating (A) Max. operating voltage (V) Operating frequency (Hz) Max. incoming cable capacity mm 2 (phase & neutral) Max. outgoing cable capacity mm Certification BS EN BS EN IP rating BS EN (internal) 2XB 2XB 14

15 Qwikline ll - split load consumer unit technical data Insulated units No. ways Dimensions (mm) Ref. no. CIRC.A RCD ways Height Width Depth SQOS2R SQOS3R SQOS4R SQOS4R SQOS5R SQOS6R SQOS7R SQOS7R Metal units No. ways Dimensions (mm) Ref. no. CIRC.A RCD ways Height Width Depth SQOMS4R SQOMS5R SQOMS6R SQOMS7R Note: Split load units are supplied without incoming devices. These should be selected separately from the Qwikline ll devices section. e.g. SQOS2R4 + SQO1100M + SQOE = 2+4 Split load insulated consumer unit supplied with site installable switch disconnector and 63A 30mA RCCB. Any RCCB may be selected as the main incomer or split portion device. Incoming Switch disconnector - 100A Terminal block - 100A RCCB s - 63 or 100A/30, 100 or 300mA Split RCCB - 63 or 100A/30, 100 or 300mA Control Devices may be installed at any outgoing point on the RCD protected or unprotected side Outgoing MCB s RCBO s - B or C curve, 3-50A - B curve 45,6kA Technical specification Metal Insulated Max. busbar current rating (A) Max. operating voltage (V) Operating frequency (Hz) Max. incoming cable capacity mm 2 ( phase & neutral ) Max. outgoing cable capacity mm Certification BS EN BS EN IP rating BS EN (Internal) 2XB 2XB 15

16 Qwikline ll - dual incomer & multi tariff technical data Insulated units No. ways Dimensions (mm) Ref. no. CIRC.A CIRC.B CIRC.C Height Width Depth Dual incomer SQO SQO SQO SQO SQO SQO SQO SQO Metal units No. ways Dimensions (mm) Ref. no. CIRC.A CIRC.B CIRC.C Height Width Depth Dual incomer SQOM SQOM SQOM SQOM Multi tariff SQOM SQOM SQOM Note: Incoming and outgoing devices must be selected separately from the Qwikline ll devices section. One incoming device is required per circuit. Incoming Switch disconnector - 100A Terminal block - 100A RCCB s - 63 or 100A/30mA, 100 or 300mA Control Devices May be installed at any outgoing position Outgoing MCB s RCBO s - B or C curve, 3-50A, 6kA - B curve 6-45A, 6kA Technical specification Metal Insulated Max. busbar current rating (A) Max. operating voltage (V) Operating frequency (Hz) Max. incoming cable capacity mm 2 (phase & neutral) Max. outgoing cable capacity mm Certification BS EN BS EN IP rating BS EN (internal) 2XB 2XB 16

17 Qwikline ll - devices technical data Qwikline ll - incoming devices Ref. no. Description No. Current Operating Max. cable Standards Width of poles rating Voltage.V cap. mm 2 approval (17.5mm mods) SQO1100M Switch dis A 230/ BS EN SQO1100L Term block 2 100A 230/ SQOE RCCB 2 100A, 30mA 230/ BS EN SQOE RCCB 2 100A, 100mA 230/ BS EN SQOE RCCB 2 100A, 300mA 230/ BS EN SQOE100100S RCCB 2 100A, 100mA TD 230/ BS EN SQOE RCCB 2 63A, 30mA 230/ BS EN SQOE RCCB 2 63A, 100mA 230/ BS EN Note: All Qwikline II consumer units are supplied without incoming devices. Any incoming device may be installed at any incoming point, or busbar split in any Qwikline II consumer unit. Qwikline ll - outgoing devices Requirements Standard units Dual incomer units Split load units Multi tariff units - 1 incoming device required. - 2 incoming devices required. - 2 incoming devices required. - 3 incoming devices required. SQD single pole circuit breakers (B curve) Ref. no. Current rating Operating Breaking cap Max. cable Standards approval voltage.v (Icn (ka)) cap. mm 2 SQO103EB6 3A 230/ BS EN SQO106EB6 6A 230/ BS EN SQO110EB6 10A 230/ BS EN SQO116EB6 16A 230/ BS EN SQO120EB6 20A 230/ BS EN SQO125EB6 25A 230/ BS EN SQO132EB6 32A 230/ BS EN SQO140EB6 40A 230/ BS EN SQO150EB6 50A 230/ BS EN SQO163EB6 63A 230/ BS EN SQD miniature circuit breakers (C curve) Ref. No. Current rating Operating voltage.v Breaking cap Max. cable Standards approval (Icn (ka)) cap. mm 2 SQO103EC6 2 3A 230/ BS EN SQO106EC6 6A 230/ BS EN SQO110EC6 10A 230/ BS EN SQO116EC6 16A 230/ BS EN SQO120EC6 20A 230/ BS EN SQO125EC6 25A 230/ BS EN SQO132EC6 32A 230/ BS EN SQO140EC6 40A 230/ BS EN SQO150EC6 50A 230/ BS EN SQO163EC6 63A 230/ BS EN SQD RCBO s (B curve) Ref. no. Current rating Operating Breaking cap Max. cable Standards approval voltage.v (Icn (ka) cap. mm 2 SQOR106B03 6A, 30mA (AC class) 230/ BS EN SQOR110B03 10A, 30mA (AC class) 230/ BS EN SQOR116B03 16A, 30mA (AC class) 230/ BS EN SQOR120B03 20A, 30mA (AC class) 230/ BS EN SQOR132B03 32A, 30mA (AC class) 230/ BS EN SQOR145B03 45A, 30mA (AC class) 230/ BS EN

18 Qwikline ll - insulated unit dimensions Ref. no. No. ways Type Dimensions (mm) A B SQO2 2 Standard SQO4 4 Standard SQO6 6 Standard SQO8 8 Standard SQO12 12 Standard SQO16 16 Standard SQO23 24 Standard SQO Dual SQO Dual SQO Dual SQO Dual SQO Dual SQO Dual SQO Dual SQO Dual SQOS2R4 2+4 Split SQOS3R3 3+3 Split SQOS4R2 4+2 Split SQOS4R6 4+6 Split SQOS5R5 5+5 Split SQOS6R4 6+4 Split SQOS7R3 7+3 Split SQOS7R7 7+7 Split Type D E F G H I J K L M N 2 way a2 4 way way way way way Cable entry sizes (mm) D 23 x 51 J 25 x 30 E 15 x 38 K 25 x 65 F 15 x 51 L 13 x 30 G 13 x 16 M 13 x 48 H 15 x 25 N 13 x 65 I 25 x 48 Note: 24 way unit is made up of 2, stacked, 12 way enclosures. Knockout quantities for Split load and Dual incomer units are obtained by adding the total number of outgoing ways, plus 2 then relating to the table, eg ways + 2 =16/16 way knockout quantity. 42 M I M I L or N J or K E H 240 B H E G F E D E F G Cable Access Points in Cover A 18

19 Qwikline ll - metal unit dimensions Ref. no. No. ways Type Dimensions (mm) No. of knockouts A B D E F G H 250X X192 SQOM2 2 Standard SQOM4 4 Standard SQOM6 6 Standard SQOM8 8 Standard SQOM12 12 Standard SQOM16 16 Standard SQOM2F 2 Flush SQOM4F 4 Flush SQOM6F 6 Flush SQOM8F 8 Flush SQOM12F 12 Flush SQOM16F 16 Flush SQOMS4R6 4+6 Split SQOMS5R5 5+5 Split SQOMS6R4 6+4 Split SQOMS7R7 7+7 Split SQOM Dual SQOM Dual SQOM Dual SQOM Dual SQOM Multi tariff SQOM Multi tariff SQOM Multi tariff WAY ONLY 5.5Ø 63 D H F D Ø (surface) 259 (flush) 5.5Ø 73 D H F D 31 B A Dotted line indicates co (all dimensions in mm) G E E F F G G G G G & 16 Way only 6 to 16 Way only 4 to 16 Way only Note: Rear of enclosure = 242mm high 19

20 RSD unit mounted RCCB s and insulated enclosures Unit mounted RCCB's and their associated enclosures offer a cost effective method of supplementing existing installations with the benefits of earth fault protection. Enclosures may be mounted at the incoming point of the installation or locally to the load eg, in garages or sheds with socket outlets. n n n Test button enables RCCB to be tested periodically Comply with BS EN Specification for residual current operated circuit breakers Rated voltage 240/415Vac single/three phase For short circuit back-up protection, maximum fuse rating: RSD 25A Fuse to BS 88 Type T 40A or BS 1361 Type RH 30A RSD 40A Fuse to BS 88 Type T 50A or BS 1361 Type RH 40A RSD 63A Fuse to BS 88 Type T 63A or BS 1361 Type RH 60A RSD 80A Fuse to BS 88 Type T 80A or BS 1361 Type RH 80A RSD 100A Fuse to BS 88 Type T 100A or BS 1361 Type RH 100A Residual current breakers Ref. no. Description Terminal Dimensions Weight Capacity Height Width Depth kg mm 2 RSD A RCCB 30mA trip 2 pole RSD A RCCB 300mA trip 2 pole RSD A RCCB 30mA trip 2 pole RSD A RCCB 100mA trip 2 pole RSD A RCCB 300mA trip 2 pole RSD A RCCB 30mA trip 2 pole RSD A RCCB 100mA trip 2 pole RSD A RCCB 300mA trip 2 pole RSD A RCCB 30mA trip 2 pole RSD A RCCB 100mA trip 2 pole RSD A RCCB 30mA trip 2 pole RSD A RCCB 100mA trip 2 pole Individual RCCB insulated enclosures Ref. no. Description Dimensions Weight Height Width Depth kg RSD2IP40 2 x 18mm module IP40 protection RSD4IP54 4 x 18mm module IP A cost effective method of providing earth fault protection for existing single circuits or entire installations 20

21 21

22 Other Square D products LoadCentre KQII 3 phase distribution boards n 6 to 72 triple pole ways n 125A to 250A rated busbars n Modular allowing addition of metering and control equipment n Unique plug-on MCB connections Twinbreak and Quadbreak fusegear Twinbreak Full AC 23 ratings (to 100A) AC22 to 160A n 20A to 100A switch disconnector fuses n 20A to 100A switch disconnectors n 160 busbar chambers Quadbreak Full AC 23 ratings (to 630A) n 63A to 630A switch disconnector fuses (supplied with fuses) n 63A to 630A switch disconnectors supplied isolator links n 200A to 800A busbar chambers I-Line panelboards MCCB panelboards n Four sizes with incoming devices from 250A to 2000A n Outgoing plug-on single pole and triple MCCB devices, 16A to 1250A n Full complement of accessories, cable extension boxes, plinths, side extension boxes, instrumentation kits and blanking plates A cost effective method of providing earth fault protection for existing single circuits or entire installations. 400A to 2000A Fuse switch panelboards n Four sizes with incoming devices from n Outoing plug-on fuse combination of units 22

23

24 Nationwide support on one number - call the Customer Information Centre on Fax Schneider Electric s local support Schneider Electric is committed to supporting its customers at every stage of a project. Our 180 sales engineers, the largest dedicated sales force in the UK electrical industry, operate from 4 customer support centres. Our sales engineers are skilled at assessing individual requirements and combined with the expert support of our product specialists, will develop the most effective and economical answer taking relevant regulations and standards fully into account. To access the expertise of the Schneider Electric group, please call Each customer support centre includes facilities for demonstrations and training, and presentation rooms fully equipped with audio visual and video, providing excellent meeting facilities. Merlin Gerin is a world leader in the manufacture and supply of high, medium and low voltage products for the distribution, protection, control and management of electrical systems and is focused on the needs of both the commercial and industrial sectors. The newly launched VDI Network Solutions offer provides flexible, configurable ethernet systems for all communication needs. Square D is a total quality organisation and its business is to put electricity to work productively and effectively, protecting people, buildings and equipment. Its low voltage electrical distribution equipment, systems and services are used extensively in residential and commercial applications. Telemecanique is a UK market leader and world expert in automation and control. It provides complete solutions, with its range of components, Modicon range of high technology programmable controllers (PLCs), multiple fieldbus and ethernet communication networks, HMI, motion control systems, variable speed drives and communications software. In addition, it offers power distribution through prefabricated busbar trunking. Local customer support centres Scotland Schneider Electric Ltd Unit 18 Claremont Centre 112a Cornwall Street South Kinning Park Glasgow G41 1AA South West Schneider Electric Ltd PO Box 41 Langley Road Chippenham Wiltshire SN15 1JJ North West Schneider Electric Ltd First Floor Market House Church Street Wilmslow Cheshire SK9 1AY Product showrooms Industrial systems and solutions showroom Schneider Electric Ltd, University of Warwick Science Park, Sir William Lyons Road, Coventry CV4 7EZ Building systems and solutions showroom Schneider Electric Ltd, Stafford Park 5, Telford, Shropshire TF3 3BL Energy and Infrastructure systems and solutions showroom Schneider Electric Ltd, 123 Jack Lane, Hunslet, Leeds LS10 1BS member of SQD5806 Enclosed switch disconnectors OCT 2005