GA-P43-ES3G LGA775 Intel Core TM / Intel Pentium / Intel Celeron. Rev MC-P43ES3G-1401R

Transcription

1 GA-P43-ES3G LGA775 Intel Core TM / Intel Pentium / Intel Celeron Rev MC-P43ES3G-1401R

2 Motherboard GA-P43-ES3G Nov. 14, 2008 Motherboard GA-P43-ES3G Nov. 14, 2008

3 REV : X.X REV : X.X

4 GA-P43-ES3G... 7 GA-P43-ES3G (CPU) MB Intelligent Tweaker(M.I.T.) ( / ) Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PC Health Status ( ) Load Fail-Safe Defaults ( ) Load Optimized Defaults ( ) Set Supervisor/User Password ( / ) Save & Exit Setup ( ) Exit Without Saving ( )

5 ( ) Download Center Xpress Recovery Q-Flash EasyTune (Easy Energy Saver) SMART Recovery Auto Green / / 4 / 5.1 / S/PDIF

6 GA-P43-ES3G IDE - 1 SATA - 2 I/O - 1 ( 12CF1-1FD001-7*R) 2 USB 2.0 ( 12CR1-1UB030-5*R) 2 SATA ( 12CF1-2SERPW-0*R) - 6 -

7 GA-P43-ES3G KB_MS ATX_12V CPU_FAN LGA775 ATX IDE R_USB USB_LAN SYS_FAN1 Intel P43 AUDIO F_AUDIO Realtek RTL8111D PCIEX1 PCIEX16 PCI1 GA-P43-ES3G DDR2_1 DDR2_2 COAXIAL LPT COMA DDR2_3 DDR2_4 IDE JMicron JMB368 CODEC PCI2 SPDIF_O PCI3 Intel ICH10 SYS_FAN2 CLR_CMOS ite IT8718 PCI4 PCI5 M_ BATTERY B_ SATA2_3 SATA2_0 SATA2_4 SATA2_1 SATA2_5 SATA2_2 CI F_PANEL CD_IN FDD PWR_LED F_USB3 F_USB2 F_USB1-7 -

8 GA-P43-ES3G PCIe CLK (100 MHz) LGA775 Processor CPU CLK+/- (400(O.C.)/333/266/200 MHz) Host Interface DDR2 1200/1066/800/667 MHz ATA-133/100/66/33 IDE Channel PCI Express x16 JMicron JMB368 Intel P43 Dual Channel Memory MCH CLK (333/266/200 MHz) PCI Express Bus x1 Dual x1 x1 PCIe CLK (100 MHz) Realtek RTL8111D Intel ICH10 6 SATA 3Gb/s 1 PCI Express x1 PCI Bus RJ45 LAN 12 USB 2.0/1.1 Floppy ite IT8208M CODEC IT8718 LPT Port COM Port PS/2 KB/Mouse 5 PCI PCI CLK (33 MHz) Line-Out (Front Speaker Out) MIC (Center/Subwoofer Speaker Out) Line-In (Rear Speaker Out) SPDIF Out - 8 -

9 1-1 (CPU) - 9 -

10 1-2 USB (CPU) LGA775 Intel Core TM 2 Extreme / Intel Core TM 2 Quad / Intel Core TM 2 Duo / Intel Pentium / Intel Pentium D / Intel Pentium 4 / Intel Pentium 4 / Intel Celeron ( ) L2 CPU (FSB) 1600(O.C.)/1333/1066/800 MHz Intel P43 Intel ICH V DDR2 DIMM 16 GB ( ) DDR2 1200/1066/800/667 MHz ( ) Realtek ALC888/892 High Definition Audio 2 / 4 / 5.1 / 7.1 ( ) S/PDIF CD Realtek RTL8111D (10/100/1000 Mbit) 1 PCI Express x16 x16 PCI Express PCI Express x1 5 PCI - 6 SATA 3Gb/s 6 SATA 3Gb/s JMicron JMB368-1 IDE ATA-133/100/66/33 2 IDE ite IT USB 2.0/1.1 (6 6 USB )

11 1 24-pin ATX 1 4-pin ATX 12V 1 1 IDE 6 SATA 3Gb/s 1 CPU S/PDIF 3 USB 2.0/ PS/2 1 PS/ S/PDIF 6 USB 2.0/1.1 1 RJ-45 3 ( / / ) I/O ite IT8718 CPU/ CPU/ CPU CPU/ CPU/ ( )

12 2 8 Mbit flash AWARD Dual TM PnP 1.0a DMI 2.0 SM 2.4 ACPI Q-Flash Xpress Rescue Download Center Xpress Install Xpress Recovery2 EasyTune ( ) (Easy Energy Saver) ( ) SMART Recovery Auto Green ON/OFF Charge Q-Share Norton Internet Security (OEM ) Microsoft Windows 7/Vista/XP ATX 30.5 x 21 ( ) Windows 32-bit 4 GB 4 GB ( ) 7.1 HD (High Definition ) ( ) CPU/ CPU/ ( ) EasyTune ( ) Intel Core TM 2 Extreme/ Core TM 2 Quad/ Core TM 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron

13 1-3 (CPU) CPU ( CPU ) CPU CPU CPU CPU ( CPU CPU ) CPU CPU CPU CPU CPU (CPU) A. CPU CPU LGA775 CPU LGA775 CPU CPU

14 B. CPU CPU CPU CPU CPU CPU CPU ( CPU ) CPU ( CPU CPU ) CPU CPU ( ) CPU ( CPU ) CPU

15 1-3-2 CPU CPU ( Intel ) CPU ( ) CPU ( ) ' ' CPU CPU (CPU_FAN) CPU CPU CPU CPU

16 1-4 ( ) DDR2 (Dual Channel Technology) 4 DDR2 (Channel) 0 (Channel 0) DDR2_1 DDR2_2 ( 1 2) 1 (Channel 1) DDR2_3 DDR2_4 ( 3 4) DDR2_1 DDR2_2 DDR2_3 DDR2_4 2 DS/SS - - DS/SS DS/SS - - DS/SS 4 DS/SS DS/SS DS/SS DS/SS (SS DS -- ) DDR2_1 DDR2_2 DDR2_3 DDR2_4 1. DDR2 2. DDR2 ( ) DDR2-16 -

17 1-4-2 DDR2 DDR DDR2 DDR2 DDR2-17 -

18 1-5 PCI Express x1 PCI Express x16 PCI / PCI Express x16 PCI Express x16 PCI Express x

19 1-6 PS/2 PS/2 PS/2 ( ) ( ) S/PDIF USB 2.0/1.1 USB 2.0/1.1 USB USB / USB USB / (RJ-45) (Gigabit Ethernet) 1 GB (1 Gbps) / 1 Gbps 100 Mbps 10 Mbps

20 ( ) ( ) ( ) 4/ HD (High Definition ) 2/4/5.1/

21 ) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN1/SYS_FAN2 5) FDD 6) IDE 7) SATA2_0/1/2/3/4/5 8) PWR_LED 9) BATTERY 10) F_PANEL 11) F_AUDIO 12) CD_IN 13) SPDIF_O 14) F_USB1/F_USB2/F_USB3 15) CI 16) CLR_CMOS

22 1/2) ATX_12V / ATX (2x2-pin 12V 2x12-pin ) 12V CPU 12V (500 ) ATX_12V V ATX_12V 4 +12V ATX 12 1 ATX V 2 3.3V V V 7 8 Power Good 9 5V SB(stand by +5V) V V ( 2x12-pin ) V ( 2x12-pin ) V 14-12V PS_ON(soft On/Off) V 21 +5V 22 +5V 23 +5V ( 2x12-pin ) 24 ( 2x12-pin )

23 3/4) CPU_FAN / SYS_FAN1 / SYS_FAN2( ) CPU_FAN SYS_FAN2 4-pin SYS_FAN1 3-pin ( ) CPU CPU CPU_FAN CPU_FAN V / 3 4 SYS_FAN 2 1 SYS_FAN V / 3 4 SYS_FAN1 1 SYS_FAN V 3 CPU CPU 5) FDD ( ) 1.44 MB 2.88 MB 360 KB 720 KB 1.2 MB

24 6) IDE (IDE ) IDE IDE ( ) IDE (Master/Slave) ( IDE ) ) SATA2_0 / 1 / 2 / 3 / 4 / 5 (SATA 3Gb/s ICH10 ) SATA SATA 3Gb/s SATA 1.5Gb/s SATA SATA 7 7 SATA2_3 SATA2_4 SATA2_ SATA2_0 SATA2_1 SATA2_ TXP 3 TXN 4 5 RXN 6 RXP SATA SATA L

25 8) PWR_LED ( ) (S3/S4) (S5) (S1) 1 1 MPD+ 2 MPD- 3 MPD- S0 S1 S3/S4/S5 9) BATTERY ( ) CMOS ( ) CMOS CMOS ( ) (+) (-) ( )

26 10) F_PANEL ( ) (+/-) HD+ HD- RES- RES+ NC MSG- MSG+ SPEAK- PW- PW+ SPEAK+ MSG ( ) S0 S1 S3/S4/S5 (S3/S4) (S1) (S5) PW ( ) ( Power Management Setup ) SPEAK ( ) HD ( ) RES ( ) (Reset) NC( )

27 11) F_AUDIO ( ) HD (High Definition ) AC'97 HD AC'97 1 MIC2_L 1 MIC MIC2_R 2 3 MIC ACZ_DET 5 LINE2_R 4 5 Line Out (R) 6 7 FAUDIO_JD LINE2_L 8 9 Line Out (L) HD AC'97 2/4/5.1/7.1 HD 2/4/5.1/7.1 12) CD_IN ( )

28 13) SPDIF_O (S/PDIF ) S/PDIF ( ) HDMI HDMI 1 SPDIFO ) F_USB1 / F_USB2 / F_USB3 (USB ) USB 2.0/1.1 USB USB USB (5V) 2 (5V) 3 USB DX- 4 USB DY- 5 USB DX+ 6 USB DY x5-pin IEEE 1394 USB USB USB

29 15) CI ( ) ) CLR_CMOS ( CMOS ) CMOS ( ) CMOS CMOS CMOS CMOS (Load Optimized Defaults) ( )

30 - 30 -

31 (Basic Input and Output System ) CMOS (POST Power-On Self- Test) CMOS POST <Delete> <Ctrl> + <F1> Windows CMOS ( CMOS Load Optimized Defaults CLR_CMOS )

32 2-1 A. LOGO ( ) B. POST Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. P43-ES3G F14a.... <DEL>: Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 08/23/2010-P43-ICH10-7A69PG0CC-00 <TAB> POST Screen <Tab> POST POST 45 Full Screen LOGO Show <DEL> Setup\Q-Flash <Delete> Q-Flash <F9> Xpress Recovery2 Xpress Recovery2 Xpress Recovery2 POST <F9> Xpress Recovery2 <F12> Boot Menu Boot Menu < > < > <Enter> <Esc> Boot Menu <End> Q-Flash <End> Q-Flash

33 2-2 ( F14a) <Enter> CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Change CPU's Clock & Voltage / < > <Enter> <Esc> <Page Up> <Page Down> <F1> <F2> (Item Help) <F5> ( ) <F6> ( ) <F7> ( ) <F8> Q-Flash <F9> <F10> <F11> CMOS <F12> CMOS (General Help) (Item Help) <F1> <Esc> <Ctrl> + <F1> Load Optimized Defaults

34 <F11> <F12> ( ) F11 Save CMOS to CMOS (Profile) (Profile 1-8) ( <SPACE> <Enter> F12 Load CMOS from CMOS <Enter> MB Intelligent Tweaker(M.I.T.) ( / ) CPU/ Standard CMOS Features ( CMOS ) / POST Advanced Features ( ) / CPU Integrated Peripherals ( ) IDE SATA USB Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PnP PCI PC Health Status ( ) Load Fail-Safe Defaults ( ) Load Optimized Defaults ( ) Set Supervisor Password ( ) Set User Password ( ) Save & Exit Setup ( ) CMOS <Y> <F10> Exit Without Saving ( ) <Esc>

35 2-3 MB Intelligent Tweaker(M.I.T.) ( / ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster [Auto] CPU Clock Ratio ( ) [10X] Fine CPU Clock Ratio ( ) [+0.0] CPU Frequency 2.66GHz (266x10) ******** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control [Disabled] x CPU Host Frequency (Mhz) 266 PCI Express Frequency (Mhz) [Auto] ******** DRAM Performance Control ******** Performance Enhance [Turbo] Extreme Memory Profile (X.M.P.) ( ) [Disabled] (G)MCH Frequency Latch [Auto] System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) DRAM Timing Selectable (SPD) [Auto] >>>>> Standard Timing Control Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) x CAS Latency Time 5 Auto x trcd 5 Auto x trp 5 Auto x tras 15 Auto >>>>> Advanced Timing Control Advanced Timing Control [Press Enter] ******** Mother Board Voltage Control ******** Voltage Types Normal Current >>> CPU CPU Vcore V [Auto] CPU Termination 1.200V [Auto] CPU Reference 0.760V [Auto] >>> MCH/ICH MCH Core 1.100V [Auto] >>> DRAM DRAM Voltage 1.800V [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU ( CMOS ) ( ) ( )

36 Robust Graphics Booster ( ) (R.G.B.) Auto Auto ( ) Fast Turbo CPU Clock Ratio (CPU ) ( ) CPU CPU Fine CPU Clock Ratio (CPU ) ( ) CPU Frequency (CPU ) CPU CPU CPU Clock Ratio 0.5 ******** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control (CPU ) CPU 20 CMOS ( Disabled) CPU Host Frequency (Mhz) (CPU ) CPU CPU Host Clock Control Enabled 100MHz ~ 1200MHz CPU 100 MHz 1200 MHz FSB 800 MHz 200 MHz FSB 1066 MHz 266 MHz FSB 1333 MHz 333 MHz PCI Express Frequency (Mhz) (PCI Express ) PCI Express 90 MHz 150 MHz Auto PCI Express 100 MHz ( Auto) ******** DRAM Performance Control ******** Performance Enhance ( ) Standard Turbo ( ) Extreme Extreme Memory Profile (X.M.P.) ( ) XMP SPD Disabled ( ) Profile1 Profile2 ( ) ( )

37 (G)MCH Frequency Latch Auto ( ) 200MHz 266MHz 333MHz 400MHz System Memory Multiplier (SPD) ( ) FSB CPU (G)MCH Frequency Latch Auto SPD ( Auto) Memory Frequency (Mhz) ( ) CPU Host Frequency (Mhz) DRAM Timing Selectable (SPD) Manual Auto ( ) Manual >>>>> Standard Timing Control CAS Latency Time Auto ( ) 3~7 trcd trp Auto ( ) 1~15 Auto ( ) 1~15 tras Auto ( ) 1~63 >>>>> Advanced Timing Control Advanced Timing Control System Memory Multiplier CMOS Setup Utility-Copyright (C) Award Software Advanced Timing Control x trrd 2 Auto x twtr 2 Auto x twr 4 Auto x trfc 28 Auto x trtp 2 Auto x Command Rate (CMD) 0 Auto >>>>> Channel A Channel A Timing Settings [Press Enter] Channel A Driving Settings [Press Enter] >>>>> Channel B Channel B Timing Settings [Press Enter] Channel B Driving Settings [Press Enter] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults trrd Auto ( ) 1~

38 twtr Auto ( ) 1~31 twr Auto ( ) 1~31 trfc Auto ( ) 1~255 trtp Auto ( ) 1~15 Command Rate(CMD) Auto ( ) 1~3 >>>>> Channel A/B Channel A/B Timing Settings CMOS Setup Utility-Copyright (C) Award Software Channel A Timing Settings x Static tread Value 6 Auto x trd Phase0 Adjustment 1 Auto x trd Phase1 Adjustment 0 Auto x trd Phase2 Adjustment 1 Auto x trd Phase3 Adjustment 1 Auto x Trd2rd(Different Rank) 6 Auto x Twr2wr(Different Rank) 6 Auto x Twr2rd(Different Rank) 5 Auto x Trd2wr(Same/Diff Rank) 8 Auto x DIMM1 Clock Skew Control Auto x DIMM2 Clock Skew Control Auto x DDR Write Training Auto Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Static tread Value Auto ( ) 1~15 trd Phase0 Adjustment Auto ( ) 0-Normal 1-Advanced trd Phase1 Adjustment Auto ( ) 0-Normal 1-Advanced trd Phase2 Adjustment Auto ( ) 0-Normal 1-Advanced trd Phase3 Adjustment Auto ( ) 0-Normal 1-Advanced Trd2rd(Different Rank) Auto ( ) 1~15 Twr2wr(Different Rank) Auto ( ) 1~

39 Twr2rd(Different Rank) Auto ( ) 1~15 Trd2wr(Same/Diff Rank) Auto ( ) 1~15 DIMM1 Clock Skew Control Auto ( ) +800ps~-700ps DIMM2 Clock Skew Control Auto ( ) +800ps~-700ps DDR Write Training Auto ( ) Disabled Enabled Channel A/B Driving Settings CMOS Setup Utility-Copyright (C) Award Software Channel A Driving Settings x Driving Strength Profile Auto x Data Driving Pull-Up Level Auto x Cmd Driving Pull-Up Level Auto x Ctrl Driving Pull-Up Level Auto x Clk Driving Pull-Up Level Auto x Data Driving Pull-Down Level Auto x Cmd Driving Pull-Down Level Auto x Ctrl Driving Pull-Down Level Auto x Clk Driving Pull-Down Level Auto Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Driving Strength Profile Auto ( ) 667MHz 800MHz 1066MHz OC-1200 OC-1333 Data Driving Pull-Up Level Auto ( ) +8~-7 Cmd Driving Pull-Up Level Auto ( ) +8~-7 Ctrl Driving Pull-Up Level Auto ( ) +8~-7 Clk Driving Pull-Up Level Auto ( ) +8~-7 Data Driving Pull-Down Level Auto ( ) +8~

40 Cmd Driving Pull-Down Level Auto ( ) +8~-7 Ctrl Driving Pull-Down Level Auto ( ) +8~-7 Clk Driving Pull-Down Level Auto ( ) +8~-7 ******** Mother Board Voltage Control ******** >>> CPU CPU Vcore Auto CPU Termination Auto CPU Reference Auto >>> MCH/ICH MCH Core Auto >>> DRAM DRAM Voltage Auto

41 2-4 Standard CMOS Features ( CMOS ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Sun, Aug Time (hh:mm:ss) 22:31:24 IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel 1 Master [None] IDE Channel 1 Slave [None] IDE Channel 2 Master [None] IDE Channel 3 Master [None] IDE Channel 4 Master [None] IDE Channel 4 Slave [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Item Help Menu Level Halt On [All, But Keyboard] Base Memory Extended Memory 640K 510M : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Total Memory CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features 512M Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) ( ) ( )/ / / Time (hh:mm:ss) ( ) IDE Channel 0, 1 Master/Slave ( / IDE/SATA ) IDE Channel 0, 1 Master/Slave IDE/SATA Auto POST IDE/SATA ( ) None IDE/SATA None

42 Manual Access Mode ( ) CHS Access Mode Auto ( )/CHS/LBA/Large IDE Channel 2, 3 Master, IDE Channel 4 Master/Slave ( / IDE/SATA ) Extended IDE Drive IDE/SATA Auto POST IDE/SATA ( ) None IDE/SATA None Access Mode Large/Auto ( Auto) ( ) Capacity Cylinder Head Precomp (Precompensation) Landing Zone Sector Drive A ( ) None None 360K, 5.25" 1.2M, 5.25" 720K, 3.5" 1.44M, 3.5" 2.88M, 3.5" Floppy 3 Mode Support ( 3 Mode ) 3 Mode Disabled ( ) Drive A ( A 3 Mode ) Halt On ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST (Power On Self Test) Base Memory PC 640 KB MS-DOS Extended Memory Total Memory

43 2-5 Advanced Features ( ) CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help Quick Boot [Disabled] Menu Level First Boot Device [Hard Disk] Second Boot Device [CDROM] Third Boot Device [Floppy] Password Check [Setup] HDD S.M.A.R.T. Capability [Enabled] CPU Multi-Threading ( ) [Enabled] Limit CPUID Max. to 3 ( ) [Disabled] No-Execute Memory Protect ( ) [Enabled] CPU Enhanced Halt (C1E) ( ) [Enabled] C2/C2E State Support ( ) [Disabled] C4/C4E State Support ( ) Disabled CPU Thermal Monitor 2(TM2) ( ) [Enabled] CPU EIST Function ( ) [Enabled] Virtualization Technology ( ) [Enabled] Delay For HDD (Secs) [0] Full Screen LOGO Show [Enabled] Backup Image to HDD [Disabled] Init Display First [PCI] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Hard Disk Boot Priority ( ) <Enter> < > < > <+>/ <PageUp> <->/<PageDown> <Esc> Quick Boot ( ) ( Disabled) First / Second / Third Boot Device ( / / ) < > < > <Enter> Floppy LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD Legacy LAN Disabled( ) Password Check ( ) Set Supervisor/ User Password Setup ( ) System HDD S.M.A.R.T. Capability ( ) S.M.A.R.T. ( Enabled) ( ) Intel CPU Intel

44 CPU Multi-Threading ( CPU ) ( ) Intel CPU CPU Enabled CPU ( ) Disabled CPU Limit CPUID Max. to 3 ( CPUID ) ( ) CPUID Windows XP Disabled Windows NT 4.0 Enabled ( Disabled) No-Execute Memory Protect (Intel ) ( ) Intel Execute Disable Bit (buffer overflow) ( Enabled) CPU Enhanced Halt (C1E) (Intel C1E ) ( ) Intel CPU Enhanced Halt (C1E) ( ) CPU ( Enabled) CPU C2/C2E State Support ( ) CPU C2/C2E CPU ( Disabled) C4/C4E State Support ( ) C2/C2E State Support CPU C4/C4E CPU C2/C2E ( Disabled) CPU Thermal Monitor 2 (TM2) (Intel TM2 ) ( ) Intel Thermal Monitor 2 (TM2) (CPU ) CPU CPU ( Enabled) CPU EIST Function (Intel EIST ) ( ) CPU Enhanced Intel Speed Step (EIST) CPU ( Enabled) Virtualization Technology (Intel ) ( ) EIST Intel Virtualization Technology ( ) Intel ( Enabled) Delay For HDD (Secs) ( ) 0~15 ( 0) ( ) Intel CPU Intel

45 Full Screen LOGO Show ( ) Logo POST ( Enabled) Disabled Backup Image to HDD ( ) ( Disabled) Init Display First ( ) PCI PCI PCI ( ) PEG PCI Express PCI Express

46 2-6 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals SATA AHCI Mode [IDE] Item Help SATA Port0-3 Native Mode [Disabled] Menu Level Azalia Codec [Auto] Onboard H/W LAN [Enabled] Green LAN [Disbabled] SMART LAN [Press Enter] Onboard LAN Boot ROM [Disabled] Onboard IDE Controller [Enabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] USB Controllers [Enabled] USB Keyboard Function [Disabled] USB Mouse Function [Disabled] USB Storage Function [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Default F7: Optimized Defaults SATA AHCI Mode (Intel ICH10 ) Intel ICH10 SATA AHCI IDE SATA AHCI SATA IDE ( ) AHCI SATA AHCI AHCI (Advanced Host Controller Interface) Serial ATA Native Command Queuing (Hot Plug) SATA Port0-3 Native Mode ( SATA Native IDE ) SATA Disabled SATA Legacy IDE ( ) Legacy IDE IRQ Native IDE Disabled Enabled SATA Native IDE Native IDE Enabled Azalia Codec ( ) ( Auto) Disabled Onboard H/W LAN ( ) ( Enabled) Disabled Green LAN Enabled ( Disabled)

47 SMART LAN ( ) CMOS Setup Utility-Copyright (C) Award Software SMART LAN Start detecting at Port... Part1-2 Status = Open / Length = 0m Part3-6 Status = Open / Length = 0m Part4-5 Status = Open / Length = 0m Part7-8 Status = Open / Length = 0m Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 0m Status Open Length Gigabit hub 10/100 Mbps hub Start detecting at Port... Link Detected --> 100Mbps Cable Length= 30m Link Detected hub Cable Length 10m Cable length less than 10M MS-DOS 10/100 Mbps Windows LAN Boot ROM Gigabit hub 10/100/ 1000 Mbps hub Status Short Length Part1-2 Status = Short / Length = 2m Part /100 Mbps Part Status Open Length

48 Onboard LAN Boot ROM ( ) ( Disabled) Onboard IDE Controller (JMicron JMB368 ) JMicron JMB368 ( Enabled) Onboard Serial Port 1 ( ) Boot ROM IDE Auto Disabled Auto 3F8/IRQ4 ( ) 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled Onboard Parallel Port ( ) Disabled 378/IRQ7 ( ) 278/IRQ5 3BC/IRQ7 Disabled Parallel Port Mode ( ) SPP ( ) EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ECP+EPP EPP ECP USB Controllers ( USB ) USB ( Enabled) USB Keyboard Function ( USB ) MS-DOS ( Disabled) USB Mouse Function ( USB ) MS-DOS ( Disabled) USB USB USB Storage Function ( USB ) POST USB USB USB ( Enabled)

49 2-7 Power Management Setup ( ) CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S3(STR)] Item Help Soft-Off by PWR-BTTN [Instant-Off] Menu Level PME Event Wake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 HPET Support ( ) [Enabled] HPET Mode ( ) [32-bit mode] Power On By Mouse [Disabled] Power On By Keyboard [Disabled] x KB Power ON Password Enter AC Back Function [Soft-Off] ErP Support [Disabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S1(POS) ACPI S1 (POS Power On Suspend) S1 S3(STR) ACPI S3 (STR Suspend To RAM) ( ) S3 S1 Soft-Off by PWR-BTTN ( ) MS-DOS Instant-Off ( ) Delay 4 Sec. 4 4 PME Event Wake Up ( ) ACPI PCI PCIe / +5VSB 1 ATX ( Enabled) Power On by Ring ( ) ACPI / ( Enabled) ( ) Windows 7/Vista

50 Resume by Alarm ( ) ( Disabled) Date (of Month) Alarm : Everyday ( ) 1~31 ( ) Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) ( ) HPET Support ( ) Windows 7/Vista High Precision Event Timer (HPET ) ( Enabled) Windows 7/Vista HPET 32-bit Windows 7/Vista 32-bit mode 64-bit Windows 7/Vista 64-bit mode HPET Support ( 32-bit mode) Power On By Mouse ( ) PS/2 / +5VSB 1 ATX Disabled ( ) Double Click PS/2 Power On By Keyboard ( ) PS/2 / +5VSB 1 ATX Disabled ( ) Password 1~5 Keyboard 98 Windows 98 KB Power ON Password ( ) Power On by Keyboard Passoword <Enter> 1~5 <Enter> <Enter> <Enter> <Enter> AC Back Function ( ) Soft-Off Full-On Memory ErP Support Disabled) ( ) (S5 ) 1 ( ( ) Windows 7/Vista

51 2-8 PnP/PCI Configurations ( PCI ) CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations PCI1 IRQ Assignment [Auto] Item Help PCI2 IRQ Assignment [Auto] Menu Level PCI3 IRQ Assignment [Auto] PCI4 IRQ Assignment [Auto] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI1 IRQ Assignment ( / PCI IRQ ) / PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 / PCI IRQ PCI2 IRQ Assignment ( PCI IRQ ) PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI IRQ PCI3 IRQ Assignment ( PCI IRQ ) PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI IRQ PCI4 IRQ Assignment ( PCI IRQ ) PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI IRQ

52 2-9 PC Health Status ( ) CMOS Setup Utility-Copyright (C) Award Software PC Health Status Reset Case Open Status [Disabled] Item Help Case Opened No Menu Level Vcore 1.316V DDR18V 1.808V +3.3V 3.264V +12V V Current System Temperature 43 o C Current CPU Temperature 28 o C Current CPU FAN Speed 2518 RPM Current SYSTEM FAN2 Speed 0 RPM Current SYSTEM FAN1 Speed 0 RPM CPU Warning Temperature [Disabled] CPU FAN Fail Warning [Disabled] SYSTEM FAN2 Fail Warning [Disabled] SYSTEM FAN1 Fail Warning [Disabled] CPU Smart FAN Control [Auto] CPU Smart FAN Mode [Auto] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status ( ) Disabled ( ) Enabled Case Opened ( ) CI Yes Reset Case Open Status Enabled Current Voltage(V) Vcore / DDR18V / +3.3V / +12V ( ) Current System/CPU Temperature ( /CPU ) /CPU Current CPU/SYSTEM FAN Speed (RPM) ( ) CPU/ CPU Warning Temperature (CPU ) CPU CPU Disabled ( CPU ) 60 o C / 140 o F 70 o C / 158 o F 80 o C / 176 o F 90 o C / 194 o F CPU/SYSTEM FAN Fail Warning (CPU/ ) No ( Disabled)

53 CPU Smart FAN Control (CPU ) CPU Auto ( ) Disabled CPU Enabled CPU CPU EasyTune CPU Smart FAN Mode (CPU ) CPU Smart FAN Control Enabled Auto Auto CPU ( ) Voltage 3-pin CPU Voltage PWM 4-pin CPU PWM 3-pin 4-pin CPU Voltage 4-pin CPU Intel PWM PWM

54 2-10 Load Fail-Safe Defaults ( ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup PnP/PCI Configurations Exit Without Saving PC Health Status Load Fail-Safe Defaults <Enter> <Y> 2-11 Load Optimized Defaults ( ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Optimized Defaults (Y/N)? N Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving Load Optimized Defaults CMOS <Enter> <Y>

55 2-12 Set Supervisor/User Password ( / ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup Enter Password: PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving Change/Set/Disable Password <Enter> 8 <Enter> Supervisor ( ) Setup Advanced Features System Password Check User ( ) System Advanced Features Password Check <Enter> <Enter> PASSWORD DISABLED

56 2-13 Save & Exit Setup ( ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced Features Set Supervisor Password Integrated Peripherals Save to CMOS and EXIT (Y/N)? Set User Y Password Power Management Setup Save & Exit Setup PnP/PCI Configurations Exit Without Saving PC Health Status Save Data to CMOS <Enter> <Y> <N> <Esc> 2-14 Exit Without Saving ( ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Quit Without Saving (Y/N)? Set User N Password Save & Exit Setup Exit Without Saving Abandon all Data <Enter> <Y> <N> <Esc>

57 ( Run.exe) 3-1 Xpress Install Xpress Install Xpress Install Xpress Install ( ) Xpress Install Windows XP USB 2.0 Windows XP Service Pack 1 " \ " "?" ( " ") ( USB 2.0 )

58 ( )

59

60 3-6 Download Center Download Center

61 4-1 Xpress Recovery2 Xpress Recovery2 PATA SATA NTFS FAT32 FAT16 Xpress Recovery2 * Xpress Recovery2 ( 10 GB ) Xpress Recovery2 512 MB VESA Windows XP SP1( ) Windows Vista Xpress Recovery Xpress Recovery2 Xpress Recovery Xpress Recovery2 USB RAID/AHCI Xpress Recovery2 Windows Vista A. Windows Vista ( ) (*) PATA IDE1/IDE2... SATA port0/port1/ port2... PATA IDE1 SATA port0 PATA IDE1 SATA port0 SATA port1 SATA port0-61 -

62 10 GB ( ) Xpress Recovery2 Xpress Recovery2 B. Xpress Recovery2 1. Xpress Recovery2 Press any key to startup XpressRocovery2 Xpress Recovery2 2. Xpress Recovery2 Xpress Recovery2 POST <F9> C. Xpress Recovery2 (Backup) Xpress Recovery2 BACKUP

63 D. Xpress Recovery2 (Restore) RESTORE E. Xpress Recovery2 (Remove) Xpress Recovery2 REMOVE F. Xpress Recovery2 REBOOT

64 4-2 TM Q-Flash TM DOS Dual Dual TM (Main ) (Backup ) Q-Flash TM Q-Flash DOS Windows Q-Flash Q-Flash A ( P43ES3G.F1) USB ( USB FAT32/16/12 ) 3. POST <End> Q-Flash ( POST <End> Setup <F8> Q-Flash RAID/AHCI IDE/SATA POST <End> Q-Flash ) Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. P43-ES3G F14a.... <DEL>: Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 08/23/2010-P43-ICH10-7A69PG0CC

65 B. 1. Q-Flash Q-Flash Update from Drive <Enter> Save to Drive FAT32/16/12 RAID/AHCI IDE/SATA POST <End> Q-Flash 2. Floppy A <Enter> Q-Flash Utility v2.15 Flash Type/Size...MXIC 25L8005/8006 1M Keep DMI Data Enable Update from Drive Save 0 file(s) found to Drive Enter Floppy : Run A :Move ESC:Reset <Drive> F10:Power Off HDD 0-0 <Drive> Total size : 0 Free size : 0 3. <Enter> to update?" <Enter> /USB "Are you sure Q-Flash Q-Flash Utility v2.15 Flash Type/Size...MXIC 25L8005/8006 1M Keep DMI Data Enable!! Copy Update completed from Drive - Pass!! Save to Drive Enter : Run Please :Move press any key ESC:Reset to continue F10:Power Off

66 <Esc> <Enter> Q-Flash POST POST <Delete> Load Optimized Defaults <Enter> CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Load Optimized Defaults (Y/N)? Y Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving Load Optimized Defaults <Y> Save & Exit Setup <Y> CMOS

67 A Windows 2. ( ) 3. G.O.M. (GIGABYTE Online Management) Update from GIGABYTE 2. Update from 3. Save Current to File 4. Load CMOS default after update C

68 4-3 EasyTune 6 EasyTune TM 6 EasyTune 6 Easytune 6 CPU CPU CPU Memory Tuner / Easy Mode CPU Advance Mode / Save (.txt ) Load Set Default Graphics ATI NVIDIA Smart CPU HW Monitor Advanced CPU / CPU (.wav ) EasyTune 6 EasyTune 6 CPU

69 4-4 (Easy Energy Saver) (Easy Energy Saver) ( ) A. 1 / ( ) 2 / CPU ( ) ( ) 3 CPU 4 CPU 5 CPU ( 1) ( ) 6 CPU / ( )

70 B. ( ) 1 / ( ) 2 / CPU ( ) 3 CPU 4 CPU 5 CPU ( 1) ( ) 6 CPU 7 8 ( ) ( ) C. ( ) Intel Core TM 2 Extreme/ Core TM 2 Quad/ Core TM 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron 400 CPU Enhanced Halt (C1E) CPU EIST Function Enabled ( ) ( ) 1 ( ) 2 3 ( ) ( )

71 4-5 SMART Recovery SMART Recovery Windows Vista PATA SATA ( ) NTFS Config Preference Smart Recovery Enable ( ) Schedule Capacity ( ) 64 ( ) 1 GB Copy ( ) ( ) ( ) 25%

72 4-6 Auto Green Auto Green Configuration Auto Green Configure Configuration Configure BT devices ( ) ( Refresh Auto Green ) 8~16 ) ( Other Settings Set Exit Device Scan Time (sec.) Rescan Times Green Auto Green 2 5 Auto Turn off HD Save Standby Suspend Disable Auto Green Power on Suspend Suspend to RAM ( ) Suspend ( ) Auto Green Key Auto Green, ( )

73 5-1 / / 4 / 5.1 / ( ) Retasking 2 / 4 / 5.1 / (High Definition Audio) HD 75 (HD) (DAC) 44.1KHz 48KHz 96KHz 192KHz (Multi-Streaming) / MP3 A. ( Windows Vista ) ( )2 / 4 / 5.1 / / 7.1 /

74 /

75 B. C. AC'97 AC'97 AC'97 D. ( HD )

76 5-1-2 S/PDIF S/PDIF ( ) 1. S/PDIF S/PDIF S/PDIF S/PDIF 2. S/PDIF Digital Output RCA ( ) ( ) S/PDIF ( ) Digital Output (RCA) S/PDIF (SPDIF_O) Digital Output

77 5-1-3 ( ) ( )

78 \ \ ) (

79 5-1-4 A. 1. ( ) 2. [ ] 3. [ ] B

80 \ Q A POST <Delete> <Ctrl> + <F1> Q / A / Q CMOS A CMOS_SW ( ) Clear CMOS (CLR_CMOS) CLR_CMOS CMOS CMOS CMOS Q A Q ( Windows XP) A Service Pack 1 Service Pack 2 ( > > ) Microsoft UAA Bus Driver for High Definition Audio ( > > > ) Audio Device on High Definition Audio Bus ( ) Microsoft UAA Bus Driver for High Definition Audio \ Q A Award CMOS

81 5-2-2 CPU CPU CPU_FAN CPU ATX 12V A ( )

82 A CPU CPU CPU POST <Delete> Load Fail-Safe Defaults Load Optimized Defaults Save & Exit Setup IDE/SATA IDE/SATA \

83 5-3 RoHS ( Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment, RoHS) WEEE ( Waste Electrical and Electronic Equipment, WEEE) RoHS ( ) RoHS WEEE 2002/96/EC WEEE

84 ( ) ( ) (China RoHS)

85 1. ( ) SN SN ( 11 ) ( ) a. b. c. d. e (V1.1) f. g. h. i. ( RAM VGA USB )

86 ~ 11:00~21:00 11:00~18:00( ) (02) ~ 8:30 ~ 17:30 ( ) (02) ~ 9:00 ~ 12:00 13:00 ~ 17:00 ( ) 215 (03) ~ 11:00~21:00 11:00~18:00( ) 278 (03) ~ 11:00~21:00 11:00~18:00( ) 81 (04) ~ 11:00~21:00 11:00~18:00( ) 173 (06) ~ 11:00~21:00 11:00~18:00( ) 51-1 (07)

87 (2) (2) ~ 09:30~ 08:30 09:30~ 05:30 / ( ) ( ) G.B.T. INC ( / ) ~ 09:00~12:00 01:00~06:00 / G.B.T. INC. (U.S.A.) x 215 (Soporte de habla hispano) Correo: soporte@gigabyte-usa.com GIGA-BYTE SINGAPORE PTE. LTD GIGABYTE TECHNOLOGY (INDIA) LIMITED GIGABYTE TECHNOLOGY PTY. LTD

88 G.B.T. TECHNOLOGY TRADING GMBH - G.B.T. TECH. CO., LTD. - GIGA-BYTE TECHNOLOGY B.V. - GIGABYTE TECHNOLOGY FRANCE ( )