More then 250 employees

Transcription

1

2 2

3 Xi An Beijing ShangHai Frankfurt More then 250 employees Tokyo Los Angeles New Jersey Shenzhen Taiwan Taipei Headquter 3

4 x86 Instruction Set Compatible Extensive S/W support Wide range of development resources Ease of migration, integration, and maintenance Highly Integrated Simplified System Design Smaller PCB footprint Lower PCB cost Low Power Consumption Fan-less design Simplified solution for heat dissipation Low Risk Mainboard design Long Term Supply : 10 years Wide Temp support : -40 C to 85 C 4

5 Legacy x86 software support DOS Windows CE 5, 6 & 7 Windows XP, XP embedded Windows 7 Linux (Ubuntu, Debian, Fedora, OpenSUSE) QNX 6.3 VxWorks 6.8 RTOS32 FreeBSD 5

6 Target Applications HMI / Motion Control MP: Sept 2014 DX3 Embedded/ Thin Client / HMI MX DX2 MX+ Embedded Controller SX DX Microprocessor (up) EX CPU Clock Speed 300MHz 500MHz 800MHz 1GHz 1.5GHz 6

7 Motor/ Motion Controller Full Duplex 7

8 CPU 800MHz / 1000 MHz x86 Compatible, Support FPU & ACPI Cache L1: 16K I-Cache, 16K D-Cache L2: 4-way 256KB L2 Cache DRAM 400MHz DDR2 DRAM (up to 2GB) GPU 2D Graphics Engine 720 x 480 x 30fps Video Capture-Input VGA / DVO (TTL 18 or 24-bit, LCD or HDMI or DP) 12-bit TV-out 1280 x 32bpp 31x31mm 720 PBGA C 8

9 Bus PCIe (x1) Slots x 2 16-bit ISA (8.3MHz / 16.6MHz / 33MHz) Mass Storage SATA SD Card PATA Audio High Definition Audio LAN Ethernet 10/100Mbps USB USB Host 2.0 x 4 Ports USB Device 1.1 x 1 Port 9

10 I/O Interface UART x 9 Ports SPI x 2 Ports I²C x 2 Ports GPIO x 88 Pins Parallel Port (SPP/EPP/ECP) PS/2 Keyboard/Mouse South Bridge Motion/Motor-Control Interface 12 Motion-Control Modules support up to 36 axis simultaneously 4 Modes of Motion Control Servo Mode (stepping motors, AC servo drivers) Encoder Mode (incremental encoders) SSI Mode (synchronous serial interface absolute encoders) Capture Mode (tachometers, home/limit switches) 2 Modes of Motor Control PWM Mode (DC motors, brushless DC motors, PMSM Motors, AC induction motors) Hall Sensor Mode (hall sensors in brushless DC motors) x86 core 8051 core PCI 8051 I/O Bus MCM 0 MCM 1 MCM 11 servo motor encoder 10

11 Vortex86DX2 PWM IGBT Motor HMI + Motion Control + Motor Control Pulse A/B, Index Encoder Vortex86DX2 HMI + Motion Control Pulse/DIR CW/CCW Pulse A/B P-cmd Servo Driver Pulse A/B, Index Motor Encoder 11

12 JTAG Vortex86EX CPU/FPU L1 CACHE 16+16KB L2 CACHE 128KB DDR3-16bit Bank x 2 NB / SB SPI Bus Boot GPIO P0 GPIO P1 GPIO P2 GPIO P3 GPIO P4 GPIO P5 GPIO P6 GPIO P7 GPIO P8 GPIO P9 COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 8051A P0 8051A P1 8051A P2 8051A P3 8051A P4 8051A P5 8051A P6 8051A P7 8051A P8 8051A P9 RICH I/O P0 RICH I/O P1 RICH I/O P2 RICH I/O P3 RICH I/O P4 RICH I/O P5 RICH I/O P6 RICH I/O P7 RICH I/O P8 RICH I/O P9 MUX Port 0 ~ 3 Bit MUX MUX MUX Port 4 to 9 Port MUX MUX Digital I/O Port 0 ~ 9 80 bits max. 5V Tolerant High/Low slew rate Schmitt-Trigger Pull High/Low Tri-state 8mA/16mA sel. CMOS RAM 256B RTC Clock PLL khz 25 MHz 3.3 V 1.5 V COM1: TXD, RXD (2) COM2: TXD, RXD (2) COM3: TXD, RXD (2) COM4: TXD, RXD (2) SPI: CS1, CLK, DO, DI (4) I2C: SDA, SCL (2) CAN: TXD, RXD (2) USB Device: D+, D- (2) Keyboard: DATA, CLK (2) Mouse: DATA, CLK (2) LAN LED: LINK, Duplex (2) PRT: 1/17 Perror (1) SPEAKER (1) WDTOUT (1) COM TX DEN: 1-8 (8) CLK OUT (1) SPI: CS2 (1) MTBF (1) HDA BCLK, SYNC, SDO, SDI, RST (5) Bit function selection (max 24/43) x8 x8 x8 MCM P0 MCM P1 MCM P2 PRT 8/17 PRT 8/17 SD/MMC COM5,6,7,8 TXD,RXD Bit-Rich-I/O Port 1 Bit-Rich-I/O Port 2 Bit-Rich-I/O Port 3 RICH I/O IOCHCK,REFRESH,SYSCLK,OSC,IRQ3,4,5,6 ISA P0 IRQ7,10,11,12,15, TC, DRQ1, DACK1 ISA P1 SA16,17,18,19, AEN, IOCHRDY, SBHE, BALE ISA P2 SA8 ~ SA15 ISA P3 SD8 ~ SD15 ISA P4 IOW,IOR,MEMW,MEMR, IOCS16,MEMCS16, GPCS0, GPCS1 ISA P5 SA0 ~ SA7 ISA P6 SD0 ~ SD7 ISA P7 Analog I/O USB 2.0 x2 SATA x1 LAN 10/100 x1 A/D 11bit x8 CPU Temp. Sensor PCI Express x1 12

13 CPU 300MHz / 500 MHz x86 Compatible, Support FPU & Cache L1: 16K I-Cache, 16K D-Cache L2: 4-way 256KB L2 Cache DRAM 300MHz DDR3 DRAM (up to 1GB) EX 0MB integrated 16x16mm 288 TFBGA C Exm 128MB DDR3 & 8MB SPI E²PROM integrated EXm2 256MB DDR3 & 16MB SPI E²PROM integrated 13

14 Bus PCIe (x1) Host or Target 16-bit ISA (8.3MHz / 16.6MHz / 33MHz) Mass Storage SATA SD Card Audio High Definition Audio LAN Ethernet 10/100Mbps USB USB Host 2.0 x 2 Ports USB Device 1.1 x 1 Port 14

15 I/O Interface UART x 10 Ports SPI x 2 I²C CAN Bus GPIO x 80 Pins (access from both x86 & 8051A) 11bit ADC x 8 Parallel Port (SPP/EPP/ECP) PS/2 Keyboard/Mouse Motion/Motor-Control Interface 4 Motion-Control Modules support up to 12 axis simultaneously 15

16 SoM pins 70 x 70 mm² Onboard DRAM ISA & PCIe COM, USB, GPIO LAN SATA VGA / LCD HD Audio WDT SoM pins 52 x 52 mm² Onboard DRAM ISA COM, USB, GPIO LAN SATA Audio WDT Heat spreader = EMI protection cover Temp. Range C 16

17 Features 66 x 100 mm² Onboard 1GB DRAM ISA & PCIe 4x COM, 2x USB, 8x GPIO LAN SATA emmc or SD Card slot VGA / LVDS HD Audio WDT Temp. Range C 17

18 Features 90 x 96 mm² Onboard 512MB/1GB DRAM PC/104 standard compliant 4x COM, 2x USB, 32x GPIO LAN SATA Parallel Port VGA / LCD / LVDS HD Audio WDT 12x PWM Temp. Range C 18

19 Features 102 x 146 mm² Onboard 512MB/1GB DRAM PC/104 standard compliant 4x COM, 5x USB, 32x GPIO LAN 100Mb + 2x 1Gb SATA Parallel Port VGA / LCD / LVDS HD Audio WDT 16x PWM T/S Controller Temp. Range C 19

20 Features 122 x 184 mm² Onboard 512MB/1GB DRAM PC/104 standard compliant 4x COM, 4x USB, 16x GPIO LAN 100Mb + 1x 1Gb SATA Parallel Port VGA / LCD / LVDS HD Audio WDT 16x PWM T/S Controller Temp. Range C 20

21 Features 80 x 82 mm² Onboard 512MB/1GB DRAM PCIe 4x COM, 4x USB, 2x SPI, I²C GPIO LAN 1Gb SATA LCD / LVDS HD Audio WDT Temp. Range C 21

22 86Duino ZERO 86Duino ONE Educake 22

23 128MB/8S/2USB/LAN/ emmc (or SD-Cardslot) 90x95mm² 128MB/4S/3USB/LAN/GPIO/I ²C/ CAN/AUDIO/AD/ emmc (or SD-Cardslot) 90x95mm² 23

24 Features 4.3 up to 15 LCD 512MB/1GB DRAM 2x COM, 3x USB LAN 100Mb & 1Gb SATA, SD & CF Slot HD Audio WDT Temp. Range C 24

25 Features 115 x 115 mm² 1GB/2GB DRAM 4x COM, 4x USB 2x LAN (PXE boot) VGA / HDMI 2.5 Drive Bay SD Card Slot Line out, Mic in V DC in Temp. Range C 25

26 Features 78 x 78 mm² 512MB DRAM 1x COM, 2x USB LAN (PXE boot) SD Card Slot Line out, Mic in 5V DC in Temp. Range C 26

27 Features 152 x 104 x 54 mm³ 1GB/2GB DRAM 4x COM, 3x USB, 16x GPIO LAN 100MB & 1Gb (PXE boot) VGA SATA DOM SD Card Slot (internal) Line out, Mic in V DC in Temp. Range C 27

28 Features Customizable enclosure for PC/104 boards Fits any PC/104 modules Various I/O ports supported Personalized laser engraving logo available IP65 rated 28

29 29