6BMM USER'S MANUAL. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
|
|
|
- Jordan Hodge
- 5 years ago
- Views:
Transcription
1 USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power on by Keyboard: If your ATX power supply supports larger than 300 ma 5V Stand-By current(dependent on the specification of keyboards), you can power on your system by entering password from the Keyboard after setting the Keyboard power on jumper (JP) and password in CMOS Setup. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B) 4. Support Wake-up On LAN. (Your ATX power supply must support larger than 720 ma 5V Stand-By current) 5. ATI RAGE PRO AGP Display Onboard. (8M SDRAM) 6. PCI Sound Onboard. 7. Support STR Function (Optional). For Intel Pentium II / Celeron TM Processor MAINBOARD R
2 REV..4 First Edition
3 The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. January 2, 999 Taipei, Taiwan
4 Quick Installation Guide I. Quick Installation Guide : CPU SPEED SETUP The default system bus speed is set 66/00MHz (). The user can change the DIP SWITCH () selection to set up the CPU speed for MHz processor. The CPU speed must match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than that of CPU. : CLK RATIO X3 X3.5 X4 X4.5 X5 X5.5 X6 X6.5 Set System Bus Speed : CPU AGP PCI Note: We don t recommend you to setup your system speed to 75, 83, 2 or 33MHz because these frequencies are not the standard specifications for CPU, Chipset and most of the peripherals. Whether your system can run under 75, 83, 2 or 33MHz properly will depend on your hardware configurations: CPU, SDRAM, Cards, etc. 2
5 . Pentium II / Celeron 233 MHz / 66MHz FSB Pentium II / Celeron 266MHz / 66MHz FSB Pentium II / Celeron 300MHz / Celeron 300A MHz / 66MHz FSB
6 Quick Installation Guide 4. Pentium II / Celeron 333MHz / 66MHz FSB Pentium II / Celeron 366 MHz / 66MHz FSB Pentium II / Celeron 400 MHz / 66MHz FSB Pentium II / Celeron 433 MHz / 66MHz FSB
7 8. Pentium II 350MHz / 00MHz FSB Pentium II 400MHz / 00MHz FSB Pentium II 450MHz / 00MHz FSB Pentium II 500MHz / 00MHz FSB
8 Quick Installation Guide 2. Pentium II 550MHz / 00MHz FSB Pentium II 600MHz / 00MHz FSB Pentium II 650MHz / 00MHz FSB
9 II. Jumper setting : GN : Green Function Switch Open: Normal operation Short: Entering Green mode GD : Green Function LED PIN FUNCTI LED (+) 2 LED (-) 7
10 Quick Installation Guide HD : IDE Hard Disk Active LED PIN FUNCTI LED (+) 2 LED (-) SPKR : External Speaker/ Internal Buzzer Connector Default : Internal Buzzer + External Speak + Buzzer PIN FUNCTI VCC 2 VCC 3 Data 4 Data 8
11 RES : Reset Switch Open: Normal operation Short: Reset system PWR : Power LED Connector (as 3 steps ACPI LED) PIN FUNCTI LED (+) 2 LED (-) 3 LED (-) 9
12 Quick Installation Guide Soft PWR : Soft Power Connector PIN FUNCTI Signal 2 GND IR : Infrared Connector (Optional) Pin No. Function 2 + IR Data Output GND 3 IR Data Input 4 5 NC POWER (+) 0
13 JP4:CLEAR CMOS FUNCTI -2 Short :Clear CMOS 2-3 Short :Normal Default: 2-3 Short When you will Clear CMOS, please remove AC Power (0V/220V). PS/2 Mouse / Keyboard Connector PS/2 Mouse PS/2 Keyboard PS/2 Mouse/Keyboard Pin No. Function Data 2 NC 3 GND 4 VCC (+5V) 5 Clock 6 NC
14 Quick Installation Guide CPU FAN : CPU Cooling Fan Power Connector Pin No. 2 3 Function GND +2V SENSE Power FAN : Power Fan Power Connector Pin No. 2 3 Function GND +2V SENSE 2
15 System FAN : System Fan Power Connector Pin No. 2 3 Function GND +2V SENSE IDE: For Primary IDE port RED LINE 3
16 Quick Installation Guide IDE2: For Secondary IDE port RED LINE FLOPPY : FLOPPY PORT RED LINE 4
17 ATX POWER : ATX POWER Connector Pin No. 3,5,7,3,5-7 GND Function 4,6,9,20 0 VCC (+5V) +2V 2-2V 8-5V Power Good 5V SB (Stand by+5v) PS- (Soft /) LPT PORT / COM A / COM B / VGA PORT LPT PORT COM B COM A VGA PORT 5
18 Quick Installation Guide GAME & AUDIO PORT Line Out Line In MIC GAME JP : Keyboard Power On Default : 2-3 short JP Enable Disable 6
19 USB: USB Port Pin No. 2 Function USB V0 USB D0-3 4 USB D0+ GND 5 USB V 6 7 USB D- USB D+ 8 GND JP7: Wake on LAN Pin No. Function V SB GND Signal 7
20 Quick Installation Guide CN6 &JP5:CD Audio Line In R G G L JP 5 G R G L CN 6 JP9: Onboard Sound Function Selection JP9 Default: -2 short -2: Onboard Sound Enabled 2-3: Onboard Sound Disabled 8
21 JP8: Onboard VGA Interrupt Function Selection JP8 Default: -2 short -2: Disable VGA INT 2-3: Enable VGA INT JP2: Onboard VGA Function Selection JP2 Default: 2-3 short -2: Onboard VGA Disabled 2-3: Onboard VGA Enabled 9
22 Quick Installation Guide J:Internal Modem Card Ring PWR On J Pin No. 2 Function Signal GND JP3 : Suspend To RAM Function (Optional) JP3 Short : Enable Suspend To RAM Function. Open : (Default) Normal Operation. When STR function is Enabled, please do not unplug the SDRAM modules, for it will burn the SDRAMs and mainboard. Support under Windows 98 ACPI O.S. 20
23 JP5: STR LED Connector (Optional) + LED : DRAM LED (Optional) When RAM LED is on, please do not unplug the SDRAM modules. 2
24 Quick Installation Guide JP: System Acceleration -2 Turbo MHz Normal Default: MHz Normal -2 Turbo: For 00MHz Turbo and other frequencies MHz Normal: For 00MHz Normal BAT:For Battery BAT + Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 22
25 Dispose of used batteries according to the manufacturer s instructions. 23
26 Quick Installation Guide III. Top Performance Test Setting: The following performance data list is the testing results of some popular benchmark testing programs. Users have to modify the value for each item in chipset features as follow for top performance setting. **The above settings have to modify according to different kinds of CPU, SDRAM, and peripherals for your system to work properly. 24
27 These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) CPU DRAM CACHE SIZE DISPLAY STORAGE O.S. DRIVER Pentium II processor (28 x ) MB SDRAM (SEC KM48S8030BT-GH) 52 KB included in CPU Onboard AGP 3D graphics acceleration chip (8MB SDRAM) Onboard IDE (Seagate ST34520A) Windows NT 4.0 Display Driver at 024 x 768 x 64k colors x 75Hz. TRIES Bus Master IDE Driver 3.70 Processor Intel Pentium II 350MHz(00x3.5) 450MHz(00x4.5) Winbench98 CPU mark FPU Winmark Business Disk Hi-End Disk Business Graphics Hi-End Graphics Winstone98 Business Hi-End
28
6SMM7 USER'S MANUAL. Celeron TM Socket 370 Processor MAINBOARD REV. 1.1 First Edition R
USER'S MANUAL. System power on by Keyboard: If your ATX power supply supports larger than 00 ma 5V Stand-By current (dependent on the specification of keyboards), you can power on your system by entering
6BA USER'S MANUAL. For Intel Pentium II / III / Celeron Processor MAINBOARD REV. 3.0 First Edition R
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
5AMMC USER'S MANUAL. Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 CPUs. Support auto detect CPU Voltage.
5AMMC USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 s. Support auto detect Voltage. Support Parity check or Ecc Function. Support Fully.0 Specification. Support
686BX USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM B) 5. Wake-Up on LAN. (on J13) 6. Supports LDCM
686BX USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
5AA USER'S MANUAL. than 720 ma 5V Stand-By current ). Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K6, K6-2, K6-III & IDT Winchip II CPUs.
AA USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM xmx, MII, AMD K, K-, K-III & IDT Winchip II s. Support Parity check or Ecc Function. Support Fully AGP.0 Specification. Support itching mode Voltage
6BXC USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BMM 1.1. PREFACE KEY FEATURES...1-1
6BMM TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6. What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BA
6BA TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II / III Processor...1-4 1.6. What is AGP?...1-5
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATHERS...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATHERS... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM... 1-3 1.5. INTRODUCE THE PENTIUM II/ III PROCESSORS...
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table Of Contents 1.1. PREFACE KEY FEATURES...
Table Of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6.
6VXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EX 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EX TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor...1-4
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II/III Processor...1-4 1.6.
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EM 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EM TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BXDS 1.1. PREFACE KEY FEATURES...1-1
6BXDS 1. INTRODUCTION TABLE OF CONTENTS 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor...1-4 1.6. What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6VX PREFACE KEY FEATHERS
6VX7 TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATHERS... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM... 1-3 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor... 1-4
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6VMA 1.1. PREFACE KEY FEATURES...1-1
6VMA TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II / III Processor...1-4 1.6. What is AGP?...1-5
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6LX7 / 6LX7A 1.1. PREFACE KEY FEATHERS...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATHERS...1-1 1.3. PERFORMANCE LIST...1-3 1.4. BLOCK DIAGRAM...1-4 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor...1-5 1.6. WHAT
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-3 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE PCI - BUS... 1-5 1.6. FEATURES... 1-5 2. SPECIFICATION
GA - 686LX USER'S MANUAL. Pentium II Processor MAINBOARD. REV. 1 First Edition
GA - 686LX USER'S MANUAL Pentium II Processor MAINBOARD REV. 1 First Edition GA-686LX The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-3 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE PCI - BUS... 1-5 1.6. FEATURES...
6LMM7 USER'S MANUAL. 3. Support 3 steps ACPI LED selectable. 4. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
6LMM7 USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents 1. INTRODUCTION TABLE OF CONTENTS 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor...1-4 1.6. What
3.11. GREEN FUNCTION INSTALLATION PERIPHERAL DEVICE INSTALLATION BIOS CONFIGURATION 4.1. ENTERING SETUP...
3.11. GREEN FUNCTION INSTALLATION... 3-8 3.12. PERIPHERAL DEVICE INSTALLATION... 3-8 4. BIOS CONFIGURATION 4.1. ENTERING SETUP... 4-1 4.2. CONTROL KEYS... 4-2 4.3. GETTING HELP... 4-3 4.3.1. Main Menu...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
TABLE OF CONTENTS. INTRODUCTION.. PREFACE... -.2. KEY FEATURES... -.3. PERFORMANCE LIST... -3.4. BLOCK DIAGRAM... -4.5. INTRODUCE THE PCI - BUS... -5.6. FEATURES... -5.7. What is AGP... -6 2. SPECIFICATION
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE PCI - BUS... 1-4 1.6. FEATURES...
6BXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
6BXE USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
6VXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
6VXE USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
Introduction CHAPTER 1
CHAPTER 1 Introduction The ROBO-667 all-in-one single board computer is designed to fit a high performance Pentium-III based CPU and compatible for high-end computer system with PCI/ISA Bus architecture.
The ROBO-8710VLA package should cover the following basic items
The ROBO-8710VLA all-in-one full size single board computer is designed to fit high performance and scalable Intel Pentium 4/Celeron processors and compatible for high-end industrial computer system with
ROBO-603. User's Manual
ROBO-603 Embedded System Board User's Manual P/N: 861106030041 Version 1.0 Copyright Portwell, Inc., 2001. All rights reserved. All other brand names are registered trademarks of their respective owners.
6BX USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM B)
6BX USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
CUV4X-E. JumperFree TM PC-133/VC MHz FSB AGP PRO/4X Socket 370
CUV4X-E JumperFree TM PC-133/VC133 133MHz FSB AGP PRO/4X Socket 370 2 2000 3 4 5 6 7 8 9 10 11 12 1 2 3 4 567 8 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 13 20.9cm (8.22in) PS/2 VIO USB COM1 LED Socket
6BXC USER'S MANUAL. 5. Wake-Up on LAN. (on JP7) (The ATX power supply supports larger than 600 ma 5V Stand-By current) REV. 1.
USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
BX2000+ USER'S MANUAL. 1. Support Suspend To RAM Function. (Optional) 2. CPU Over Voltage Select (Magic Booster).
BX2000+ USER'S MANUAL 1. Support Suspend To RAM Function. (Optional) 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual and Write Protection. 4. System power on by PS/2 Mouse: First, enable this
CUV4X. JumperFree TM PC-133 AGP/4X
CUV4X JumperFree TM PC-133 AGP/4X 2 2000 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 13 20.9cm (8.22in) PS/2 VIO CPU_FAN Socket 370 cyrix 133 VIA VT82C694X
BX2000+ USER'S MANUAL. 1. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual BIOS and BIOS Write Protection.
BX2000+ USER'S MANUAL 1. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual and Write Protection. 4. System power on by PS/2 Mouse: First, enable this function
Quick Start Guide. SY-6BB V1.0 Mainboard F C. Introduction. Installation. Hardware. Quick BIOS Setup. The SOYO CD
SY-6BB V.0 Mainboard Quick Start Guide Introduction Hardware Installation Quick BIOS Setup The SOYO CD F C Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER 00% RECYCLED PAPER SOYO
JumperFree TM CUA
JumperFree TM CUA 2 2000 3 4 5 6 7 8 9 10 11 3D Graphics 12 1 2 3 4 5 6 7 8 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 109 13 21.3 cm (8.38 in) PS/2KBMS VIO USB 2MB SDRAM IC_ PWR_ FAN COM2 2MB
Introduction CHAPTER 1
CHAPTER 1 Introduction The ACTI-788 all-in-one single board computer is designed to fit a high performance Celeron based CPU and compatible for high-end computer system application with PCI/ISA bus architecture.
A7A266-E DDR RAM/SDRAM 266MHz FSB AGP Pro/4X Socket A
A7A266-E DDR RAM/SDRAM 266MHz FSB AGP Pro/4X Socket A 2 2001 3 4 5 6 7 8 9 10 11 / 12 1 2 3 4 5 6 7 27 26 25 24 23 22 21 20 19 18 17 16 15 14 131211 109 8 13 24.5cm (9.64in) PS/2 CPU_FAN USB1 USB2 01 01
6BX7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor MAINBOARD REV. 1.1 First Edition R
6BX7+ USER'S MANUAL. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual BIOS and BIOS Write Protection. 4. System power on by PS/2 Mouse: First, enable this function
5AX USER'S MANUAL. Support Intel Pentium, MMX, Cyrix/IBM, 6x86MX, MII, AMD, K6, K6-2 & IDT C6 CPUs. Support 3 Steps ACPI LED.
5AX USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM, 6x86MX, MII, AMD, K6, K6-2 & IDT C6 CPUs. Support 3 Steps ACPI LED. Support Parity check or Ecc Function (at 66, 75 MHz). Support Fully AGP.0 Specification.
MX3W Pro Online Manual MX3W Pro
MX3W Pro MX3W Pro...1 What s in this manual...2 Before You Start...9 Quick Installation Procedure... 10 Motherboard Map... 11 Models of MX3W Pro Series...12 Block Diagram... 13 Hardware...14 JP14 Clear
PCM-4153-A2 PC/104+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB 2.0, On-board Flash and Memory Startup Manual
PCM--A PC/0+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB.0, On-board Flash and Memory Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following
CLK. Slot1 VIA ATX Mainboard. User s Manual 4
2.1. Mainboard Layout Drawing CLK AGP 1 H14.318 Slot1 VIA693-133 ATX Mainboard ISA2 ISA1 User s Manual 4 2.2. Hardware Installation Steps 2.2.1. Installing System Memory The mainboard is equipped with
6VXE7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor Motherboard REV. 3.0 Third Edition R ME-6VXE7P-3003
6VXE7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
Chapter 1 Specification
SL-I / I-L Chapter Specifications COM LPT Chapter Specification - Mainboard Layout and Components Setup CPU Fan Analog Monitor Front Audio CD-ROM Audio LAN Controller (for I-L) ne in CD AC'97 IT872F JKB
810DTC/810DT+ Pentium II/III Celeron Twin Processor
810DTC/810DT+ Pentium II/III Celeron Twin Processor AT MAINBOARD ( VER. 3.x ) USER S MANUAL DOC. NO. UM-810DTC-E2...PRINTED IN TAIWAN TABLE OF CONTENTS TABLE OF CONTENTS CHAPTER & SECTION Page 1. INTRODUCTION...1-1
5AX USER'S MANUAL. Support Keyboard Power ON/OFF function. Thermal Protection. Pentium Processor PCI - ISA BUS MAINBOARD REV. 3.
5AX USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 CPUs. Support auto detect CPU Voltage. Support Parity check or Ecc Function. Support Fully AGP.0 Specification.
PCA-6781 ISA Celeron M Half-sized SBC with VGA/ LCD/LVDS/10/100 Ethernet/USB2.0 and SSD Startup Manual
PCA-6781 ISA Celeron M Half-sized SBC with VGA/ LCD/LVDS/10/100 Ethernet/USB2.0 and SSD Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following
FAN3 Connector AUX-IN Connector. CD-IN Connector FAN2 Connector. Intel /100 LAN Controller CPU2 FAN Connector AGP Pro Slot USB Connector
PS/2 Mouse Connector SPP/EPP/ECP Parallel Port RJ45 0/00 LAN Jack (Optional) Speaker Out FAN3 Connector AUX-IN Connector PS/2 Keyboard Connector USB Port Port 2 Port Line-In MIC-In CD-IN Connector FAN2
P4B533-X. Motherboard
P4B533-X Motherboard C1458 2003 2 3 4 5 6 7 1 2 2 3 Jumper Mode Jumper Free (Default) 8 9 10 1-1 1-2 1-3 1-4 SB_PWR1 P4B533-X P4B533-X Onboard LED ON Standby Power OFF Powered Off 1-5 CPU_FAN1 ATX12V1
MAINBOARD. Installation Guide
MAINBOARD Rev: 1.01H Date: May - 99 All other product names are trademarks or copyrights of their respective owners. Specifications and information contained in this manual are subject to change without
User s Manual Full-Size PICMG 1.3 SHB Version 1.0
3308360 User s Manual Full-Size PICMG 1.3 SHB Version 1.0 Copyrights This document is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated
IV. Suspend to RAM Installation A.1 Introduce STR function: A.2 STR function Installation
6WXM IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few
Introduction CHAPTER 1
CHAPTER 1 Introduction The ACTI-777 all-in-one single board computer is designed to fit a high performance Pentium-III FC-PGA based CPU and compatible for high-end computer system application with PCI/ISA
Motherboard Specifications, A8AE-LE (AmberineM)
1 of 7 6/28/2009 11:14 PM» Return to original page Motherboard Specifications, A8AE-LE (AmberineM) Motherboard specifications table Motherboard layout and photos Clearing the CMOS settings Clearing the
User s Manual Single Board Computer Version A1, June 2007
User s Manual Single Board Computer 3307900 Version A1, June 2007 Copyrights This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated
6VXE7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor Motherboard REV. 1.0 Second Edition R
6VXE7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
BIOS Setup DESKPOWER 5000
BIOS Setup DESKPOWER 5000 1 Preface What is BIOS setup? BIOS setup is a program that helps the user set up a hardware environment, including memory, hard disks, and floppy disk drives. Minimum setup has
GA 686SLX USER'S MANUAL
GA 686SLX USER'S MANUAL. System power on by PS/2 Mouse: If you are using ATX power supply, you are able to power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
A7PRO. Jumper TM PC133/VC MHz FSB AGP Pro/4X
A7PRO Jumper TM PC133/VC133 200MHz FSB AGP Pro/4X 2000 2 3 4 5 6 7 8 9 10 11 / 12 1 2 3 4 5 6 7 8 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 13 24.5cm (9.64in) PS/2 JTPWR PWR_FAN VIO USB COM1 Socket
Chapter 2 HARDWARE INSTALLATION. 2.1 Central Processing Unit: CPU CHAPTER 2
Chapter 2 HARDWARE INST 2.1 Central Processing Unit: CPU The mainboard operates with Intel Pentium II/Celeron TM processor. The mainboard uses a CPU Slot called Slot 1 for easy CPU installation and a jumper
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 PCM-9584 all-in-one
LV-681. Mini-ITX motherboard. User s Manual. Edition: /04/09. LV-681 User s Manual 1
LV-681 Mini-ITX motherboard User s Manual Edition: 1.00 2007/04/09 LV-681 User s Manual 1 Copyright The trademarks mentioned in the manual are legally registered to their respective companies. Disclaimer
System Upgrade. Stand: Frday, 20. April :52
System Upgrade Stand: Frday, 20. April 2007 14:52 I Content: System Upgrade Teil I Initation... 1 1.1 ISA - Controller with... Win98 1 1.2 ISA - Controller with... WinXP 2 1.3 LT3CC-Controller... at printer
FS-A70. Test Report. Edition 1.2
FS-A70 Test Report Edition 1.2 Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9 2.1 CPU Test... 9 2.2 Memory Test... 10
BIOS Setup DESKPOWER 6000
BIOS Setup DESKPOWER 6000 1 Preface What is BIOS setup? BIOS setup is a program that helps the user set up a hardware environment, including memory, hard disks, and floppy disk drives. Minimum setup has
Intel /100Mbps Ethernet Controller 32bit PCI Slot x2. ATI Rage XL Video Chip with 4MB Video RAM onboard 64bit PCI Slot x4
PS/2 Mouse SPP/ECP/EPP Print Port USB RJ45 LAN JP0 CPU Terminator Jumper PS/2 Keyboard Port VGA BP (Backplane) 2 Port WOL (Wake On LAN) Intel 82559 0/00Mbps Ethernet Controller 32bit PCI Slot x2 ATI Rage
IV. Suspend to RAM Installation A.1 Introduce STR function: A.2 STR function Installation. There are two ways to accomplish this:
Suspend To RAM Installation IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system
Computer Maintenance. Unit Subtitle: Motherboards. Copyright Texas Education Agency, All rights reserved. 1
Computer Maintenance Unit Subtitle: Motherboards 1 Lesson Objectives Describe the function of the motherboard. Identify the different types of motherboards and their characteristics. Identify the main
Computers Are Your Future
Computers Are Your Future 2008 Prentice-Hall, Inc. Computers Are Your Future Chapter 6 Inside the System Unit 2008 Prentice-Hall, Inc. Slide 2 What You Will Learn... Understand how computers represent
PCM-9588 Intel Celeron M EBX SBC with DVI/ TTL/ VGA/ LVDS/ LAN/ 6 COM/ 2 SATA/ 6 USB2.0/16-bit GPIO Startup Manual
PCM-9588 Intel Celeron M EBX SBC with DVI/ TTL/ VGA/ LVDS/ LAN/ 6 COM/ 2 SATA/ 6 USB2.0/16-bit GPIO Startup Manual Packing List Before you begin installing your card, please make sure that the following
Frequently Asked Question
Appendix A Frequently Asked Question Q: How can I identify the mainboard BIOS version? A: The AOpen mainboard BIOS version appears on the upper-left corner of the POST (Power-On Self Test) screen. Normally,
Trademarks. IBM, PC/AT, and PC/XT are trademarks of International Business Machines Corporation.
The information presented in this publication has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. Specifications are subject to change without notice. Trademarks
Important Information
Important Information Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual,
ES-270. Test Report. Edition /08/02
ES-270 Test Report Edition 1.1 2007/08/02 Identify:Gary Test Engineer: Les Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 7 2. Compatibility test...8
6WXM USER'S MANUAL. 3. Support 3 steps ACPI LED selectable. 4. Support Modem Ring-On (Include internal Modem and external modem on COM A and COM B).
6WXM USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
PCM-4381 Intel Pentium M EPIC SBC with VGA/2 LVDS/ 2 Ethernet/ 4 COM/ 2 SATA/6 USB 2.0/ 16 bit GPIO
PCM-4381 Intel Pentium M EPIC SBC with VGA/2 LVDS/ 2 Ethernet/ 4 COM/ 2 SATA/6 USB 2.0/ 16 bit GPIO Before you begin installing your card, please make sure that the following items have been shipped: 1.
FCC Compliance Statement:
DECLARATI OF CFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares
MMX Enhanced. 586 GXM-AV Main Board. Trademarks and / or Registered trademarks are the properties of their respective owners.
586 GXM-AV Main Board Trademarks and / or Registered trademarks are the properties of their respective owners. User s Manual Version 1.1 The Information presented in this publication has been carefully
Operating Guide VB6002-Series Mini-ITX Mainboard
Operating Guide VB6002-Series Mini-ITX Mainboard November 16, 2006 Version 1.01 Table of Contents Table of Contents... i VIA VB6002-Series Overview... 1 VIA VB6002-Series Layout... 2 VIA VB6002-Series
v02.54 (C) Copyright , American Megatrends, Inc.
1 Main Advanced H/W Monitor Boot Security Exit System Overview System Time System Date [ 14:00:09] [Tue 02/21/2006] BIOS Version : P4i65G BIOS P1.00 Processor Type : Intel (R) Pentium (R) 4 CPU 2.40 GHz
Quick Start Guide. SY-6IZM/3 Motherboard F C. Introduction. Installation. Hardware. Quick BIOS Setup. The SOYO CD
SY-6IZM/ Motherboard Introduction Quick BIOS Setup Hardware Installation Quick Start Guide The SOYO CD F C Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER 00% RECYCLED PAPER SOYO
G-MAX TM. ATX Series User s Manual
Copyright Notice Copyright 2001 Gigabyte Technology. All Rights Reserved. No part of this documentation, including but not limited to the products and software described in it, may be reproduced, transmitted,
P4BWA. Test Report. Edition 1.0
P4BWA Test Report Edition 1.0 Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9 2.1 CPU Test... 9 2.2 Memory Test... 10
LS-371. Test Report. Edition /11/05
LS-371 Test Report Edition 1.2 2007/11/05 Identify: Gary Test Engineer: Les Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9
Industrial Single Board Computer 5.25 Embedded Miniboard
Industrial Single Board Computer 5.25 Embedded Miniboard LS-573 Support Intel Penryn CPU with DDRIII SO-DIMM, CRT, LVDS, DVI, HDTV, Gigabit LAN, PCI slot, USB, Serial ATAII, Mini PCI, PCI Express mini
MAINBOARD. Installation Guide
MAINBOARD Rev: 1.01H Date: April - 99 All other product names are trademarks or copyrights of their respective owners. Specifications and information contained in this manual are subject to change without
MAINBOARD. Installation Guide
MAINBOARD Rev: 1.00H Date: April - 99 All other product names are trademarks or copyrights of their respective owners. Specifications and information contained in this manual are subject to change without
PCM-9562 Intel Atom N450/D510 EBX SBC with 3LAN/6 COM/3 SATA/8 USB2.0/2 Watchdog Startup Manual
PCM-9562 Intel Atom N450/D510 EBX SBC with 3LAN/6 COM/3 SATA/8 USB2.0/2 Watchdog Startup Manual Packing List Before you begin installing your card, please make sure that the following items have been shipped:
Overview BookSize PC. BookSize B6. BookSize B2. BookSize B1. DSM-Hotline: +49 (0) BookSize PC NEW. Page.
Overview BookSize B6 Slots: 1 x PCI Drives: 1 x 3.5"/2.5" HDD (EIDE or SATA 150) or int. 60 Watt power supply AC Operating temperatures: 0-50 C Dimensions (WxDxH): 300 x 220 x 90 mm Page 28 Intel - Core
ROBO-698 is a full-sized SBC, and therefore is able to run on any PICMG backplane, active or passive.
Troubleshooting This chapter provides you a few useful tips to quickly get your ROBO-698 running with no failure. As basic hardware installation has been addressed in Chapter 3, this chapter will basically
6VA+ USER'S MANUAL. Pentium II/!!!/Celeron TM Processor Motherboard REV. 1.0 First Edition R
VA+ USER'S MANUAL. System power on by PS/ Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/ Mouse.. System power
2 2001
CUV266 Socket 370 2 2001 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 27 26 25 24 23 22 21 20 19 18 17 1615 14 13 1211109 8 7 13 24.5cm (9.64in) PS/2 USB1_PWR CUV266 USB RJ-45 COM1 JTPWR 0 1 01 3 4 01 01 5 6 VIO3
MX3W DOC. NO. : MX3W-OL-E0001A. A Open
MX3W DOC. NO. : MX3W-OL-E0001A 1 Before You Start This is in PDF format, we recommend using Adobe Acrobat Reader 4.0 for online viewing, it is included in Bonus CD disc or you can get free download from
User s Manual. MMX Enhanced MediaGX System Board. MMX Enhanced MediaGX System Board
MMX Enhanced MediaGX System Board MMX Enhanced MediaGX System Board Trademarks and / or Registered trademarks are the properties of their respective owners. User s Manual IBM, PC/AT and PC/XT are trademarks
LV-651 Test Report. Edition /09/26
LV-651 Test Report Edition 1.02 2006/09/26 Index Index...2 1. Function test...4 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 7 2. Compatibility test...8 2.1 VGA Graphic Test... 8 2.2