CASEMENT. Operator/Stationary Units
|
|
|
- Cassandra Mosley
- 6 years ago
- Views:
Transcription
1 Operator/ Units MO (mm) 1-4 1/2 (419) 1-8 1/2 (521) 2-0 1/2 (622) 2-4 1/2 (724) 2-8 1/2 (826) 3-0 1/2 (927) RO (mm) 1-5 (432) 1-9 (533) 2-1 (635) 2-5 (737) 2-9 (838) 3-1 (940) FS (mm) 1-4 (406) 1-8 (508) 2-0 (610) 2-4 (711) 2-8 (813) 3-0 (914) DLO (mm) /32 (274) /32 (376) /32 (477) /32 (579) /32 (680) /32 (782) /32 (1674) /32 (1471) /32 (1369) /32 (1268) /32 (1065) 3-2 1/32 (966) /32 (861) /32 (760) /32 (658) ICA1731 ICA1735 ICA1739 ICA1743 ICA1747 ICA1755 ICA1759 ICA1763 ICA1771 T ICA2131 ICA2135 ICA2139 ICA2143 ICA2147 ICA2155 ICA2159 ICA2163 ICA2171 T ICA2531 ICA2535 ICA2539 ICA2543 ICA2547 ICA2555 ICA2559 ICA2563 ICA2571 T ICA2931 ICA2935 ICA2939 ICA2943 E ICA2947 E ICA2955 E ICA2959 E ICA2963 E ICA2971 ET ICA3331 ICA3335 ICA3339 ICA3343 E ICA3347 E ICA3355 E ICA3359 E ICA3363 E ICA3371 ET ICA3731 ICA3735 E* ICA3739 E* ICA3743 E ICA3747 E ICA3755 E ICA3759 E ICA3763 E ICA3771 ET
2 Construction Details Casements available as an operator or stationary. L or R handing determined from exterior. Operator INTEGRITY FROM MARVIN WOOD-ULTREX SERIES LEFT RIGHT TECHNICAL PUBLICATIONS DRAWING IS INTENDED FOR ILLUSTRATIVE PURPOSES ONLY. Operator - Casemaster & Awning DRAWING IS INTENDED FOR ILLUSTRATIVE PURPOSES ONLY. TECHNICAL PUBLICATIONS Operator - Casemaster & Awning Operator Head and Sill Operator - Casement Operator Vertical Mullion Operator - Awning Operator - Awning Rough Opening Head Frame jamb Size & sill UGHRING CKIEASP HUGHRING JACKIEASP Operator - Casement Head and Sill Head jamb & sill DESCRIPTION: PRICE GUIDE Special sized units available within product size ++NEW++ ICA AND AWNING- CONSTRUCTION Masonry DETAIL Opening matrix. See your Integrity retailer. Operator - Rough Casement E = These windows meet National APPROVED Opening Egress BY: SIZE: DRAWING NO: Codes for fire evacuation. AH APPROVAL DATE: SCALE: DRAWN BY: DATE: PROFILE NO.: Optional Casement Grilles, GBGs and SDLs 1 =1' 0" JEANIEP 06/12/07 are available in a standard Rectangular cut shown. Other available lite cuts shown on page 3. * 3735 and 3739 meet Egress if installed at proper height from floor.
3 2 Wide Operator/ Units MO (mm) 2-8 1/2 (826) 3-4 1/2 (1029) 4-0 1/2 (1232) 4-8 1/2 (1435) 5-4 1/2 (1638) 6-0 1/2 (1842) RO (mm) 2-9 (838) 3-5 (1041) 4-1 (1245) 4-9 (1448) 5-5 (1651) 6-1 (1854) FS (mm) 2-8 (813) 3-4 (1016) 4-0 (1219) 4-8 (1422) 5-4 (1626) 6-0 (1829) ICA1731 2W ICA2131 2W ICA2531 2W ICA1735 2W ICA2135 2W ICA2535 2W ICA1739 2W ICA2139 2W ICA2539 2W ICA1743 2W ICA2143 2W ICA2543 2W ICA1747 2W ICA2147 2W ICA2547 2W ICA1755 2W ICA2155 2W ICA2555 2W ICA1759 2W ICA2159 2W ICA2559 2W ICA1763 2W ICA2163 2W ICA2563 2W ICA1771 2W T ICA2171 2W T ICA2571 2W T ICA2931 2W ICA2935 2W ICA2939 2W ICA2943 2W E ICA2947 2W E ICA2955 2W E ICA2959 2W E ICA2963 2W E ICA2971 2W ET ICA3331 2W ICA3731 2W ICA3335 2W ICA3735 2W E* ICA3339 2W ICA3739 2W E* ICA3343 2W E ICA3743 2W E ICA3347 2W E ICA3747 2W E ICA3355 2W E ICA3755 2W E ICA3359 2W E ICA3759 2W E ICA3363 2W E ICA3763 2W E ICA3371 2W ET ICA3771 2W ET Special sized units available within product size matrix. See your Integrity retailer. E = These windows meet National Egress Codes for fire evacuation. * 3735 and 3739 meet Egress if installed at proper height from floor. Any unit in these combinations can be operating or stationary. Operating sash are viewed from the exterior. 113"x 71 5 /8" Maximum up to 7 units wide by 1 unit high. 85"x 94 3 /4" Maximum up to 4 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information.
4 3 Wide Operator/ Units INTEGRITY FROM MARVIN WOOD-ULTREX SERIES MO (mm) 4-0 1/2 (1232) 5-0 1/2 (1537) 6-0 1/2 (1842) 7-0 1/2 (2146) 8-0 1/2 (2451) 9-0 1/2 (2756) RO (mm) 4-1 (1245) 5-1 (1549) 6-1 (1854) 7-1 (2159) 8-1 (2464) 9-1 (2769) FS (mm) 4-0 (1219) 5-0 (1524) 6-0 (1829) 7-0 (2134) 8-0 (2438) 9-0 (2743) ICA1731 3W ICA2131 3W ICA2531 3W ICA1735 3W ICA2135 3W ICA2535 3W ICA1739 3W ICA2139 3W ICA2539 3W ICA1743 3W ICA2143 3W ICA2543 3W ICA1747 3W ICA2147 3W ICA2547 3W ICA1755 3W ICA2155 3W ICA2555 3W ICA1759 3W ICA2159 3W ICA2559 3W ICA1763 3W ICA2163 3W ICA2563 3W ICA1771 3W T ICA2171 3W T ICA2571 3W T ICA2931 3W ICA2935 3W ICA2939 3W ICA2943 3W E ICA2947 3W E ICA2955 3W E ICA2959 3W E ICA2963 3W E ICA2971 3W ET ICA3331 3W ICA3335 3W ICA3339 3W ICA3343 3W E ICA3347 3W E ICA3355 3W E ICA3359 3W E ICA3363 3W E ICA3371 3W ET ICA3731 3W ICA3735 3W E* ICA3739 3W E* ICA3743 3W E ICA3747 3W E ICA3755 3W E ICA3759 3W E ICA3763 3W E ICA3771 3W ET 113"x 71 5 /8" Maximum up to 7 units wide by 1 unit high. 85"x 94 3 /4" Maximum up to 4 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information.
5 4 Wide Operator/ Units MO (mm) 5-4 1/2 (1638) 6-8 1/2 (2045) 8-0 1/2 (2451) 9-4 1/2 (2858) RO (mm) 5-5 (1651) 6-9 (2057) 8-1 (2464) 9-5 (2870) FS (mm) 5-4 (1626) 6-8 (2032) 8-0 (2438) 9-4 (2845) ICA1731 4W ICA2131 4W ICA2531 4W ICA1735 4W ICA2135 4W ICA2535 4W ICA1739 4W ICA2139 4W ICA2539 4W ICA1743 4W ICA2143 4W ICA2543 4W ICA1747 4W ICA2147 4W ICA2547 4W ICA1755 4W ICA2155 4W ICA2555 4W ICA1759 4W ICA2159 4W ICA2559 4W ICA1763 4W ICA2163 4W ICA2563 4W ICA1771 4W T ICA2171 4W T ICA2571 4W T ICA2931 4W ICA2935 4W ICA2939 4W ICA2943 4W E ICA2947 4W E ICA2955 4W E ICA2959 4W E ICA2963 4W E ICA2971 4W ET Special sized units available within product size matrix. See your Integrity retailer. E = These windows meet National Egress Codes for fire evacuation. Any unit in these combinations can be operating or stationary. Operating sash are viewed from the exterior. 113"x 71 5 /8" Maximum up to 7 units wide by 1 unit high. 85"x 94 3 /4" Maximum up to 4 units wide by 5 units high. Field mull kits are available. Structural mullion reinforcement is required for some assemblies. Please consult your local Integrity from Marvin representative for more information.
VistaLuxe Collection - Standard Sizes & Size Limitations
Kolbe & Kolbe Millwork Co., Inc. Page 1 of 7 VistaLuxe Collection - Standard Sizes & Size Limitations Crank-Out Casements (venting) Size Limitations Min Max Size : 1' 4" 1' 8" 2' 0" 2' 4" 2' 6" 2' 8" 3'
Low "E" Insulating Glass. Authentic Divided Light. Modular Replacement Sash. Crafting Products that Fit Northeast Lifestyles Since 1890
Low "E" Insulating Glass Authentic Divided Light Modular Replacement Sash Crafting Products that Fit Northeast Lifestyles Since 1890 Turn Your Dreams into Reality with BROSCO Window Units. Windows that
DOUBLE HUNG XL WINDOWS
WHXL11 22 5 8" (575) 26 5 8" (676) 30 5 8" (778) 32 5 8" (829) 34 5 8" (575) 36 5 8" (930) 38 5 8" (981) 42 5 8" (1083) 21 5 8" (549) 25 5 8" (651) 31 5 8" (803) 35 5 8" (905) 41 5 8" (1057) 19" (484)
Andersen Intelligent Quote (iq) Software Update
Andersen Intelligent Quote (iq) Software Update RELEASE: Version 15.2 October 26, 2015 SUBJECT: EFFECTIVE: Andersen Intelligent Quote (iq) Software Update Immediately Version 15.2 Overview Andersen is
400 Series Woodwright Picture and Transom Windows (2002 to Present)
400 Series Woodwright Picture and Transom Windows (2002 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Picture & Transom Windows........................................ Page
iq Training (iq Quote & Order Tool)
1. Setting Default Information a. Changing your dealer number. It is important to use the correct dealer number when quoting with iq as this will give you access to the Andersen products that are available
Doors, Windows & Joinery
Doors, Windows & Joinery RETAIL PRICE LIST SUPPLYING WA BUILDINGS SINCE 1981 Timber Structural Timber Decking Mouldings Flooring Doors, Windows & Joinery Heating Architectural Hardware Lighting & Ceilings
Andersen Windows - Abbreviated Quote Report Project Name:
Quote #: 006413 Print Date: 07/31/2008 Quote Date: 04/17/2008 iq Version:8.0 Page 1 Of 6 Customer: RUSE/DENNIS 0001 3 BSMT2813 (V) BASEMENT $ 78.33 $ 234.99 RO Size = 2' 8 1/4" W x 1' 3 3/4" H Unit Size
STAFF BRIEF. Project: 2018-COA-286 LPC Meeting: August 21, 2018 Address: 635 Downing Street Staff: Jessi White
Community Planning and Development Denver Landmark Preservation 201 West Colfax, Dept. 205 Denver, CO 80202 p: (720)-865-2709 f: (720)-865-3050 www.denvergov.org/preservation STAFF BRIEF E-Mail: landmark@denvergov.org
400 Series Woodwright Picture and Transom Windows (2002 to Present)
400 Series Woodwright Picture and Transom Windows (2002 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Picture & Transom Windows........................................ Page
Technical Guide G. GSpecialty Windows. Technical Guide G1
Technical Guide G Specialty Windows G Technical Guide G1 Product Features Styles Picture, Fixed Casement, Operating Casement, Double Hung, Single Hung, Radius Top and Cottage options. Standard Features
TECHNICAL GUIDE M LOEWEN MULTISLIDE
TECHNICAL GUIDE M LOEWEN MULTISLIDE LOEWEN MULTISLIDE LOEWEN MULTISLIDE STANDARD FEATURES Standard panel heights up to feet Standard panel widths up to 5 feet; custom sizes available Natural Douglas Fir
WINDOW OPENING CONTROL DEVICES. Meeting ASTM F Standard
WINDOW OPENING CONTROL DEVICES Meeting ASTM F2090-10 Standard SAFE. SECURE. BEAUTIFUL. The Marvin Family of Brands has always been committed to creating quality window and door products. As a company with
SPECIALTY WINDOWS. Product Features Specifications Parts Identification. Round Top Window. G6 G12 Product Elevations
SPECIALTY INDOS G2 G4 G5 Product Features Specifications Parts Identification G5 Round Top indow G6 G12 Product Elevations G6 G7 G8 G9 G10 G11 G12 alf Round and Extended alf Round indows Quarter Round
making your dream home a reality
making your dream home a reality L i b e r t y C o L L e C t i o n Contents Tudor Casement Windows 2 Caribbean Awning Windows 3 Fixed Lite Windows 4 Decorative Windows 5 Twintilt Double Hung Windows 6
400 Series Tilt-Wash Insert Windows (2011 to Present)
400 Series Tilt-Wash Insert Windows (2011 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Tilt-Wash Insert Windows........................................... Page 3 Parts
Series 417 LouvreMASTER Sun Control Shutters
Series 417 LouvreMASTER Sun Control Shutters ARCHITECTURAL SERIES Photo courtesy of Manly Windows DATE: MAY 2013 REPLACES: MARCH 2008 ARCHITECTURAL SERIES Series 417 KEY FEATURES/PERFORMANCE CHARACTERISTICS
Protecting All That Matters. www.assurawindows.com www.assurawindows.com Florida s newest window and door company that has been in business for over 0 years. Assura offers an extensive line of impact and
1700 SERIES WINDOW COLLECTION
ALSIDE NEW CONSTRUCTION 1700 SERIES WINDOW COLLECTION SIZE GUIDE TABLE OF CONTENTS 3 Specifications 4 Quick Spec Guide 5 Single-Hung Model 1700 14 Twin Single-Hung Model 1720 22 Triple Single-Hung Model
400 Series Tilt-Wash Insert Windows (2011 to Present)
400 Series Tilt-Wash Insert Windows (2011 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Tilt-Wash Insert Windows........................................... Page 3 Parts
Reed Construction Data (RCD) Revit Modeling Guidelines 1.0
Reed Construction Data (RCD) Revit Modeling Guidelines 1.0 Table of Contents Page 1. Overview.. 1-2 2. Family Files and Templates.. 2 3. System Families.. 2 4. Determining the Amount of Detail to Include
ROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 6-3/4" / SCREW SPLINE ASSEMBLY / STRUCTURAL SILICONE GLAZED Elev-Rcs-SS-Silicone-2.5x6.75 H1401-Head H1402-Horizontal
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 10-7/8" / SHEAR BLOCK ASSEMBLY / STRUCTURAL SILICONE GLAZED Elev-Rcs-SB-Silicone-2.5x10.875 H1241-Head H1242-Horizontal
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 10-7/8" / SHEAR BLOCK ASSEMBLY / 3M VHB TAPE GLAZED Elev-Rcs-SB-VHB-2.5x10.875 H1141-Head H1142-Horizontal H1143-Sill
RFA 2315 WINDOW. Revit Content WINDOW. Copyright by Content & More Limited, All Rights reserved
Copyright 29-2 by Content & More Limited, All Rights reserved Dimension Overview Frame Width Frame Depth Window Profile Depth Window Profile Width Frame Depth Position Width GENERAL PLAN DIMENSIONS FIG
Bizmantools Quoting Lite -Quick Start-
B i z m a n t o o l s Q u i c k S t a r t P a g e 1 -Quick Start- Contents 1. Initial Setup (page 2) 2. How to quote a. Create a Quote Project (page 7) b. Create Drawing from Template (page 9) c. Create
Commercial Design Using Autodesk Revit Architecture 2013
Commercial Design Using Autodesk Revit Architecture 2013 Includes video instruction Daniel John Stine CSI, CDT Multimedia DVD SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks.
Window and Door Selection Made Easy. The Right Function The Right Style The Right Choices
Window and Door Selection Made Easy The Right Function The Right Style The Right Choices Trust your Decision Above: Essence Series picture-over-double casement windows Cover: Style Line Series picture-over-offset
NFRC Lab Simulation Uploadsheet Format Checking Tool
NFRC Lab Simulation Uploadsheet Format Checking Tool A simulation uploadsheet format checking tool has been implemented in order to minimize and identify issues and to reduce investigation time on errors
Guide to Screen and Kit sizes 612 Retractable Pleated Insect Screen
Guide to Screen and Kit sizes Screen sizes: Width - screen reduces in width to the size of the next smallest screen, eg. a 3600mm wide screen can be installed in an opening that is between 2700mm-3600mm
Area. 5. What is the perimeter of a square whose area is 64? A. 16 B. 32 C. 64 D. 256
Name: Date: 1. The area of a triangle is 24 square centimeters. If the base of this triangle is 8 centimeters, find the number of centimeters in the altitude. 5. What is the perimeter of a square whose
DuraShutter SELECT in aluminum. Phone: RAYNOR Fax:
DuraShutter SELECT in aluminum A T T R A C T I V E D U R A B L E D E P E N D A B L E Phone: 1-800-4-RAYNOR Fax: 1-815-288-7142 www.raynor.com With a proven track record for durability, DuraShutter counter
Seceuro Range CD38 Built On
Seceuro Range CD38 Built On Technical Specifications www.hag.co.uk Advice Line 0800 072 3444 Seceuro Range CD38 Built On What is it made from The Seceuro range offers an all Aluminium Construction Typical
100 SERIES PRODUCT GUIDE FOR PROFESSIONALS
100 SERIES 2014 PRODUCT GUIDE FOR PROFESSIONALS CONTENTS 100 SERIES Product Overview......................... 1 Windows.............................. 15 Patio Doors............................ 79 Combination
Smart Entities Tutorial
Smart Entities Tutorial Smart Entities Tutorial... 1 Getting Ready to Draw... 2 Working with Smart Walls... 5 Customize the Exterior Walls... 5 Draw the Exterior Walls... 8 Draw the Interior Walls... 9
INDEX. Main Page (Projects) Getting around the Main Page... 8 Standard Types... 9
INDEX Getting Started Recommended System Requirements...... 3 Download and Installation... 3 Setting Glass Prices... 3 Setting supplier discounts... 5 Costing Defaults... 5 Setting up printers... 6 Network
Precision. Introduction...i. Precision Units. 4-inch Wide inch Wide Interlocking Fence Units Scored Caps & Fence Units...
Precision Introduction...i Precision Units 4-inch Wide...1 6-inch Wide... 2 Interlocking Fence Units... 4 Scored Caps & Fence Units...5 8-inch Wide... 6 10-inch Wide... 8 12-inch Wide... 9 16-inch & Pilasters...11
Characteristics. High impact with draw wire (ICTA 3422) Use. Accessories for conduits (p. 754)
flexible conduits flexible conduits Characteristics 610 16 612 16 Flame-retardant Conform to standard: EN 0086-2-2 and IEC 6186-2 Crush resistance: 70 Newtons Supplied wrapped in film, the coil acts as
Capabilities and Limitations of Autodesk Revit in a Construction Technology Course
Capabilities and Limitations of Autodesk Revit in a Construction Technology Course 55 Capabilities and Limitations of Autodesk Revit in a Construction Technology Course Mike Christenson University of Minnesota
BS EN :2006. Clause 4.8 Load Bearing Capacity of Safety Devices. Test of: Window Restrictors
Exova Warringtonfire KeyIndustrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com BS EN 14351-1:2006 Clause
DEVELOPMENT OF IMPROVED ALGORITHMS FOR IMPROVING ACCURACY OF CMA METHODOLOGY
16 Bridge St. TEL: (413) 256-4647 home@fenestration.com Millers Falls, MA 01349 FAX: (413) 256-4823 http://www.fenestration.com Progress Report: DEVELOPMENT OF IMPROVED ALGORITHMS FOR IMPROVING ACCURACY
Table of Contents. 18 Column Wrap 20 Garage Door ThermoStop 22 Window & Door Trim 26 Mouldings 39 Reference
Product Directory 2 Table of Contents 3 4 S4S Trimboard 6 SurEdge Trimboard 8 Conceal Trim System 12 Precision Cut Trimboard 16 Sheet Board 17 Nickel Gap/Shiplap, Beadboard & Wainscoting 18 Column Wrap
NEWSLETTER. LogiKal Version CONTENT 3RD SEPTEMBER 2008
NEWSLETTER LogiKal Version 5.2.0.152 3RD SEPTEMBER 2008 CONTENT INPUT OF ELEMETS... 3 Position Selection... 3 Align Profiles... 4 Profile Splices... 6 Roller Shutters... 7 Set FFL for Doors and Windows...
INSTALLATION GUIDE. Timberlane, Inc. 150 Domorah Drive, Montgomeryville, PA Timberlane.com
INSTALLATION GUIDE Timberlane, Inc. 150 Domorah Drive, Montgomeryville, PA 18936 800-250-2221 Timberlane.com WELCOME Thank you for choosing Timberlane. This guide provides clear, step-by-step instructions
CONTENTS. AA TM 250/425 Thermal Entrances
EFFECTIVE FEBRUARY 1, 2018 CONTENTS A9/1 CONTENTS SECTION A9...AA TM 250/425 THERMAL ENTRANCES* PAGE AA TM 250/425 BASE DOOR DOOR CHASSIS... A9/3 DOOR GLAZING/WEATHERING OPTIONS... A9/4 DOOR BOTTOM RAIL
Curries Inventory and List Prices October 17, 2016
Curries Doors & s 3650 Fraser St. - Unit D Curries Inventory and List Prices October 17, 2016 Effectove: 10/17/16 List Prices subject to change and correction I N D E X Page # Series Size Description 2
Chief Architect X2.6 Update Notes
Chief Architect X2.6 Update Notes October 12, 2009 Contents 1 General Notes 4 2 12.2 Update Notes 4 2.1 Overview...................................... 4 2.2 File Management.................................
T502-T519 Miscellaneous Trims. 19th Century Casing Step. Band Mould or Astragal Flat. Novelty Mini-Mock Bevel. Window & Door Stop.
T502-T519 Miscellaneous s Stock Glass Bead T502 9/16 x 3/4 Window & Door Stop T503 9/16 x 1 Scribe & Shoe T504 3/8 x 7/8 Inside Corner T505 Outside Corner T507 Casing Step T510 1/2 x 3/4 STOCK T511 T512
4C Standard Horizontal Mailboxes
4C Standard Horizontal Mailboxes Note: 3700 series 4C standard horizontal mailboxes and parcel lockers have been U.S.P. S. approved and meet the specifications of USPS-STD-4C. These units are required
Architectural & Design Catalog
Architectural & Design Catalog Welcome To Millwork Concepts The design of a new home is both an exciting and expensive endeavor. From the architect to the installer, the quality of the service creates
CI/SfB (35) Xy April Between us, ideas become reality AXIOM C CANOPY. Installation Guide
CEILING & WALL SYSTEMS Between us, ideas become reality CI/SfB (35) Xy April 2011 AXIOM C CANOPY Installation Guide 1 PREPARATION SUSPENSION POINTS Suspension points should be determined before installing
Series 75. Steel Roller Shutters
Roller Shutters consist of individual interlocking steel slats, providing high strength security for commercial and industrial applications such as factories, loading docks, workshops and warehouses. FEATURES
Library Part Maker for ARCHICAD 20
Library Part Maker for ARCHICAD 20 User Guide United Kingdom & Ireland Printable PDF version GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability
Door Components - Jambs - Northeast
Door Components - Jambs - Northeast 800.253.9000 6'8" FLAT JAMBS JAMB SIZE DIMENSION BELOW DADO EFPMD (GLO PAK) VENEER EGPIN (EDGE GLUED ) VENEER OVER W/WS (EXP3W) BIRCH VENEER (PB CORE FJ EDGE) BIRCH
5849 PEACHTREE ROAD ATLANTA, GEORGIA T T F INNERFACESIGN.COM. ClearView SERIES SPECIFICATIONS
5849 PEACHTREE ROAD ATLANTA, GEORGIA 30341 T 770 921 5566 T 800 445 4796 F 770 279 1327 INNERFACESIGN.COM ClearView SERIES SPECIFICATIONS North Elevators 1L 1K 1J North Mall 1I 1G Central Elevators 1H
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
Electric Window Actuators. Conel Stand Alone Window Operator 126 Conel Keypad Window Operator 128
Electric Window Actuators Conel Stand Alone Window Operator 126 Conel Keypad Window Operator 128 125 Conel Stand Alone Window Operator General Information Opening and closing multiple sashes to optimise
In Store Solutions
In Store Solutions 2015 1 Hello! Welcome to participate in BRIO s in store effort. BRIO is now investing in a common expression in all stores. The physical meeting is clarified with BRIO as a brand and
The Builder s preference for innovative ideas and superior quality. Moulding Selection Guide Orlando Edition Moulding & Millwork
The Builder s preference for innovative ideas and superior quality. 2007 Orlando Edition Moulding & Millwork Casings Casings define the overall character of a room and are often the most visible part of
DRAWING INDEX UNIVERSITY OF NEW MEXICO VR - CLASSROOM UNIVERSITY OF NM CAMPUS MILTON HALL, ROOM 155
3 4 5 OWNER: DRAWING INDEX UNIVERSITY OF NEW MEXICO COVER G-SHEETS CONTACT: NIVIA FRANCO G00 COVER SHEET CONSULTANTS: CIVIL ENGINEERING ARCHITECTURAL A D0 FIRST FLOOR DIMENSIONED PLAN & WALL PARTITION
THERM 6.3 / WINDOW 6.3 NFRC Simulation Manual
THERM 6.3 / WINDOW 6.3 NFRC Simulation Manual Lawrence Berkeley National Laboratory December 2011 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government.
GIESSE OS OPERATOR Revolutionizing the Appearance and Performance of Out Swing Windows
Revolutionizing the Appearance and Performance of Out Swing Windows www.giesse.it Introduction Awning and Casement Window Hardware How it USED to be Until now, anyone using outswing aluminum windows had
RFA Door. Revit Content DOOR MANUAL. Copyright by Content & More Limited, All Rights reserved
DOOR MANUAL DOOR FEATURES OVERVIEW FRAME REBATES FRAME TYPES DOOR FLUSH SYMBOL LINES WOOD FRAME METAL FRAME SIDE LIGHTS & TRANSOM PANEL GLAZING DOUBLE PANEL DOOR ACCESSORIES DOOR TYPES VOID FOR ADDITIONAL
Introduction to Fire Chiefs Online
Introduction to Fire Chiefs Online ISO s Fire Chiefs Online (FCO) website serves as an informational interface between ISO and the fire service community. The site provides password-protected access for
Shape 2 Assessment Calculator allowed for all questions
Shape Assessment Calculator allowed for all questions Foundation Higher All questions Time for the test: 50 minutes Use the π button or take π to be.4 Name: _ Grade Title of clip Marks Score Percentage
SHADING SYSTEMS. PERSIANA METRA (SHUTTERS)
SHADING SYSTEMS. PERSIANA METRA (SHUTTERS) METRA. STYLE THAT ADDS VALUE TO YOUR HOME METRA. Design, Colour, Emotion. Italian style that is envied the world over. METRA s integrated systems have been created
WIND-BORNE DEBRIS MAP " STORM PANEL COVERAGE " STORM PANELS STORM PANEL EXTRUSIONS STORM PANEL ACCESSORIES...
When we first opened our doors as a small hardware store in 1957, our main clients consisted of one-and two-man operations working out of pickup trucks. Today, we are a nationally recognized manufacturer
Product Guide. Server Safes & Cabinets Modular Caging Security Walling Modular Enclosures
Product Guide Server Safes & Cabinets Modular Caging Security Walling Modular Enclosures Ventis Server Safe The Ventis Server Safe is a high security safe suitable for servers, sensitive data and all 19
The ULTIMATE Window Buyer s Guide TOP 10 TIPS FOR BUYING REPLACEMENT WINDOWS
The ULTIMATE Window Buyer s Guide 1 Research Company and Brand Review Background, History and Online Reviews Make sure you are dealing with a well-established and reputable window company. Ask the following
AGENDA: Using Gizmos to Modify 3D Models. AutoCAD 3 LECTURE NOTES: CLASS 08. Using Gizmos to Modify 3D Models
AGENDA: Using Gizmos to Modify 3D Models Using Gizmos to Modify 3D Sub-Objects and Faces 3DArray, Mirror3D, and Align Using Gizmos to Modify 3D Models Gizmos allow us to move, rotate, and scale a set of
Installation Instructions Access Dual Roller FlexShade System by Draper
Installation Instructions Access Dual Roller FlexShade System by Draper Caution 1 The Access Dual Roller FlexShade headbox is shipped in one carton; the shades and/or screen are shipped in a separate carton;
Tables Part I. Session 45: Creating Tables Session 46: Modifying the Layout of Tables Session 47: Formatting the Design of Tables. Unit.
Unit 9 Tables Part I Session 45: Creating Tables Session 46: Modifying the Layout of Tables Session 47: Formatting the Design of Tables 2 45 Creating Tables Session Objectives Create a table Enter data
Hardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
FAQ s. Contents. CTB Quote Plus FAQ s
CTB Quote Plus FAQ s FAQ s This section provides answers to frequently asked questions in CTB Quote Plus. When answers require detailed explanation, the chapter or section within the User Guide is referenced.
Autodesk Revit Architecture 2011 Getting Started Video Tutorials
Autodesk Revit Architecture 2011 Getting Started Video Tutorials Instructor Handout Created by: Marvi Basha, Klaus Hyden und Philipp Müller Autodesk Student Experts TU Graz September 2010 Introduction:
Traditional Mortise & Tenon - Raised Panel
abinet Door & Drawer Front Options Traditional Mortise & Tenon - Raised Panel Style: 10 P: 101 Frame: P101 x 0.6 Style: 20 P: 102 Frame: P102 x 0.6 Style: 2000 P: 102 Frame: P102 x 0.6 Style: 2200 P: 102
See also Accessories. Industrial Corrosion Inhibitors Floor Stand Kit PANELITE Enclosure Lights Overview Bulletin: A28X1, A28X2, A28XM.
Spec-224 H763.422.2211 763.422.26 SEQUESTR Preferred-Cutout s SEQUESTR External s SEQUESTR Preferred-Cutout s SEQUESTR External s SEQUESTR External Package, Type 12 FEATURES INUSTRY STANARS UL 58A Listed;
WEIGHING PLATFORMS. Trade, commerce and industry. Product Numbers 2816, 2817, 2818, 2822
WEIGHING PLATFORMS Product Numbers 2816, 2817, 2818, 2822 Trade, coerce and industry > Weighing platforms for floor scales > Sturdy, flat design > With stainless steel, painted or hot-dip galvanised >
Assembly Instruction. Brackets
9022-601-01 Contents 1 Document Information... 3 2 Tools... 4 2.1 Tools... 4 3 Drawings and BOMs... 5 3.1 Drawing and BOM, 9000-033-01... 5 3.2 Bracket Top Coated R6031, 9022-002...6 3.3 Bracket 18.9"
The power of BIM for structural engineering. Autodesk Revit. Structure
The power of BIM for structural engineering. Autodesk Revit Structure Improve Efficiency, Accuracy, and Coordination Concurrent modeling for structural design, analysis, and coordinated documentation Building
CATALOGUE 2017 / 2018 LOG CABINS LEISURE HOUSES CONSTRUCTIONS
CATALOGUE 2017 / 2018 LOG CABINS LEISURE HOUSES CONSTRUCTIONS ADVANTAGES We control every step from log cutting until our product delivered to the client, this way we ensure effective individual product
Webb Core Cleanroom Wall System
Webb Core Cleanroom Wall System PART 1 GENERAL 1.1 WORK INCLUDED A. This Section specifies the requirements necessary to furnish, install and complete a cleanroom wall system (CRW) including, but not limited
MOULDINGS ARCHITRAVES BASEBOARDS
ARCHITRAVES High above windows and doors, architraves work to add grandeur to any space reducing miter lines and elevating your look. A great architrave is, above all else, the dressing that s built to
SCHOOL BASED FORM 4 EXAM JULY-AUGUST 2017 Kenya Certificate of Secondary Education (K.C.S.E) MATHEMATICS Paper 1 July/August 2017 Time :2 ½ Hours
NAME:. SCHOOL INDEX NO:..... Date:.. Candidate s signature:.. 121/1 MATHEMATICS Paper 1 July/August 2017 Time: 2 ½ Hours SCHOOL BASED FORM 4 EXAM JULY-AUGUST 2017 Kenya Certificate of Secondary Education
MAHESH TUTORIALS I.C.S.E.
MAHESH TUTORIALS I.C.S.E. GRADE - X (2017-2018) Exam No. : MT/ICSE/SEMI PRELIM - I - SET - B 005 Value Added Tax, Banking, Shares and Dividend, Matrices, Reflection, Section and Mid-Point Formula, Equation
05. Autodesk Revit & Parametric Modeling
Design + Computing 05. Autodesk Revit & Parametric Modeling 4/2/2015 Digital Design I HOM3034 Spring 2015 Every Thursday 2:00 p.m. 5:50 pm Jin Kook Lee, Ph.D. 02-2220-2645 designit@hanyang.ac.kr Assistant
Autodesk Revit Building Family Editor - From the Beginning
11/29/2005-8:00 am - 11:30 am Room:Americas Seminar [Lab] (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Revit Building Family Editor - From the Beginning Stephen Stafford
Autodesk Revit Structure Autodesk
Autodesk Revit Structure 2011 What s New Top Features Autodesk Revit Structure 2011 Software Enhanced Design Features Fit and Finish Slanted columns Beam systems and trusses Concrete clean-up Concrete
DUKE UNIVERSITY CONSTRUCTION STANDARDS
1 00 01 10 Table of Contents DIVISION 00: PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 10 Table of Contents 06.17.2014 00 21 13 Instructions to Bidders 11.08.2013 00 22 13 Supplementary Instructions
Table of Contents. KCD Terminology.2-4. KCD Dimensions KCD Toolbar KCD Top Ten Short Cuts...10
Table of Contents KCD Terminology.2-4 KCD Dimensions...5-6 KCD Toolbar...7-9 KCD Top Ten Short Cuts......10 KCD Terminology Main KCD Screen A The Main Menu, this is where you will be able to find all the
Blocks reduce drawing size since multiple instances of a block are stored in one definition.
AGENDA: 1. Blocks and Controlling Block Properties 2. Creating and Inserting Blocks 3. Editing Blocks after Insertion 4. Storing Blocks Blocks A block is a collection of entities, grouped together and
December 22 nd MWF SIPs. User Guide
December 22 nd 2016 MWF SIPs User Guide Table of contents 1. Introduction... 3 1.1 Things to Know Before Starting... 3 1.1.1 Starting from a Template... 3 1.1.2 Material... 3 1.1.3 Creating Revit Wall
MOULDING MOULDING SOLID PINE BASE SOLID PINE BASE. Streamline Base P-220 1/2 x 3-1/4. Streamline Base P-218 1/2 x 2-1/4
SOLID PINE Solid pine, or stain grade pine, is one of the original moulding substrates that can be painted or stained. The grain of this solid piece of wood is continuous for stained or natural finishes.
Autodesk Revit. Structure
The power of BIM for structural engineering. Autodesk Revit S L N E TW R K Structure Improve Efficiency, Accuracy, and Coordination Concurrent modeling for structural design, analysis, and coordinated
product catalog &pricing guide
product catalog &pricing guide PRICES EFFECTIVE JULY 2017 Phone: (334) 264-6158 Fax: (334) 264-6001 Visit us on the web: www.southernshutter.com E-mail: sales@southernshutter.com Terms Conditions / Warranty
When discussing 3-D solids, it is natural to talk about that solid s Surface Area, which is the sum of the areas of all its outer surfaces or faces.
Lesson 3 Lesson 3, page 1 of 10 Glencoe Geometry Chapter 11. Nets & Surface Area When discussing 3-D solids, it is natural to talk about that solid s Surface Area, which is the sum of the areas of all
Rolling Shutter Installation Manual Complete Technical Guide Please read before installing rolling shutters
Please read before installing rolling shutters 5331 West Orange St. Pearland, TX. 77581 Ph: 281.485.1911 Fax: 281.485.0839 www.rollac.com for Rolling Shutter Installation Please familiarize yourself with
Measuring for BLINDS AND SHADES
Measuring for BLINDS AND SHADES FOR BLINDS AND SHADES Our measuring guide will take you through the steps you need to measure your windows. Just a few simple measurements are all you ll need and if you
HARDWARE ms1505 SECTION Page 1
ms1505 SECTION 08 70 00 - Page 1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Hardware for interior and exterior doors. B. Thresholds and weatherstripping. 1.02 RELATED REQUIREMENTS A. Section 08 11 13 - Hollow