Guide to Screen and Kit sizes 612 Retractable Pleated Insect Screen

Transcription

1 Guide to Screen and Kit sizes Screen sizes: Width - screen reduces in width to the size of the next smallest screen, eg. a 3600mm wide screen can be installed in an opening that is between 2700mm-3600mm wide. Height - each screen can be cut down by up to 200mm. HEAD Single screen W Double screen W H REBATE RSC AND RST OR RSTT RSC AND RST OR RSTT (W) Min 900mm Max 4500mm (W) Min 900mm Max 4500mm THRESHOLD Min 600mm Max 3200mm Min 600mm Max 3200mm Codes Screen: RSDL PBK PBK (powder coat black), PWT (powder coat white), PGY (powder coat silver) Screen frame width (W) Screen frame height Brio 612 retractable pleated insect screen Frame kit: KIT L PBK PBK (powder coat black), PWT (powder coat white), PGY (powder coat silver) L (low head track), T (tall head track system), R (retro fit extrusions, Framing Kit No. Frame kit selection: Applies to Data Sheet G40 and G50 Screen width (W) mm KIT-9 KIT-9 KIT-10 KIT-11 KIT-12 KIT KIT-9 KIT-9 KIT-10 KIT-11 KIT-12 KIT KIT-9 KIT-9 KIT-10 KIT-11 KIT-12 KIT KIT-9 KIT-9 KIT-10 KIT-11 KIT-12 KIT-12 Screen height mm KIT-5 KIT-5 KIT-6 KIT-7 KIT-8 KIT KIT-5 KIT-5 KIT-6 KIT-7 KIT-8 KIT KIT-5 KIT-5 KIT-6 KIT-7 KIT-8 KIT KIT-5 KIT-5 KIT-6 KIT-7 KIT KIT-5 KIT-1 KIT-2 KIT-3 KIT KIT-5 KIT-1 KIT-2 KIT KIT-1 KIT-1 KIT-2 KIT KIT-1 KIT-1 KIT KIT-1 KIT-1 KIT-2 Double screen applications use a combination of 2 screens to suit panel configuration and position of access doors Brio, part of the Allegion family of brands. ISSUE 3.1 DATA SHEET G

2 Guide to Screen and Kit sizes Frame kit selection: Applies to Data Sheet G60 Single screen Screen width (W) mm Meeting screen Screen width (W) mm Screen height mm KIT-11 KIT KIT-7 KIT-8 Screen height mm KIT-26 KIT KIT-22 KIT-23 Screen install overview: 1. Cutting screen assembly TOP (PRE-ASSEMBLED PARTS) CASSETTES AND CORDS TO BE LOCATED AWAY FROM BOTTOM CUT AREA LENGTH OF SCREEN ASSEMBLY = H - 33 (INCLUDE TOP OF PLASTIC) BOTTOM (CUT THIS END ONLY) PRE-ASSEMBLED PARTS 2. Install screen assembly 3. Install cassette MAX CUT 200mm (2) SNAP (1) INSERT No. RST OR No. RSTT TRACK CASSETTE ASSEMBLIES CORDS CASSETTE ASSEMBLIES 4. Tension cords 5. Fit handlebar cover SCREEN COMPRESSED DURING TENSIONING ADJUST ANCHORS (2) SNAP (1) INSERT COVER MESH COMPRESSED COVER Product improvement is a continuous process. Please check specification at time of purchase. ISSUE 3.1 DATA SHEET GB

3 Integrated with Top Hung Exterior Folding Weatherfold 4s Application Suitable for residential screening of folding windows and doors. Aluminium frame is available in three standard powder coat colours: black, silver and white. Custom colours are also available upon request. Assembled with high grade materials to ensure quality is maintained. UV stable pleated mesh and high strength, braided tensioning cords allow the screen to operate smoothly. Opening Specification Screen System: For Individual Screens: Max Opening Height Min Opening Height Max Opening Width Min Opening Width 612 Folding Frame 3200mm 600mm 4500mm 900mm Openings can use two screens in total, one screen in each direction providing a total span of 9000mm wide. Aluminium lengths are supplied in kits, for more information see Data Sheets G. Screen heights can be cut down by 200mm to accommodate exact sizes. Corner applications are also possible. Hardware Specification Screen: RSDLXXXX-XXXXXXX For RSDL sizing codes, see Data Sheet G. Channel: RSC Powder coated aluminium channel. Track: Track RST Powder coated aluminium track, used in KIT-X-LXXX Tall track RSTT Powder coated aluminium track, used in KIT-X-TXXX No. RST TRACK No. KIT-X-LXXX FRAME KIT Jamb Mount: RSJ Powder coated aluminium jamb mount. No. RSTT No. KIT-X-TXXX FRAME KIT No. RSDLXXXX-XXXXXXX SCREEN Brio, part of the Allegion family of brands. ISSUE 3 DATA SHEET G40

4 Integrated with Top Hung Exterior Folding Weatherfold 4s 160 RST TRACK HEAD DETAIL No. RSTT BRIO WEATHERFOLD 4s EXTERIOR FOLDING HARDWARE SCREEN EXTENDED WIDTH (W) PLEATED MESH B. 14 BRIO WEATHERFOLD 4s EXTERIOR FOLDING HARDWARE B. 79 NOSE HEIGHT 120 MEETING SCREEN EXTENDED 161 C. PULL HANDLE BRIO 612 RETRACTABLE INSECT SCREEN (SCREEN CAN BE CUT DOWN 200mm MAX TO SUIT HEIGHT) No. WS-MST MAGNETIC STRIP No. WS-MP MAGNETIC PLATE C. 79 WIDTH (W) DIMENSION C (OVERALL) C Product improvement is a continuous process. Please check specification at time of purchase. ISSUE 3 DATA SHEET G40B

5 Integrated with Top Hung or Bottom Rolling Sliding Panels Application Suitable for residential screening of sliding windows and doors. Aluminium frame is available in three standard powder coat colours: black, silver and white. Custom colours are also available upon request. Assembled with high grade materials to ensure quality is maintained. UV stable pleated mesh and high strength, braided tensioning cords allow the screen to operate smoothly. Opening Specification Screen System: For Individual Screens: Max Opening Height Min Opening Height Max Opening Width Min Opening Width 612 Sliding Frame 3200mm 600mm 4500mm 900mm Openings can use two screens in total, one screen in each direction providing a total span of 9000mm wide. Aluminium lengths are supplied in kits, for more information see Data Sheets G. Screen heights can be cut down by 200mm to accommodate exact sizes. Corner applications are also possible. Hardware Specification Screen: RSDLXXXX-XXXXXXX For RSDL sizing codes, see Data Sheet G. Channel: RSC Powder coated aluminium channel. Track: Track RST Powder coated aluminium track, used in KIT-X-LXXX Tall track RSTT Powder coated aluminium track, used in KIT-X-TXXX No. RST TRACK No. KIT-X-LXXX FRAME KIT Jamb Mount: RSJ Powder coated aluminium jamb mount. No. RSTT No. KIT-X-TXXX FRAME KIT No. RSDLXXXX-XXXXXXX SCREEN Brio, part of the Allegion family of brands. ISSUE 3 DATA SHEET G50

6 Integrated with Top Hung or Bottom Rolling Sliding Panels No. RST TRACK BRIO TIMBEROLL 200 EXTERIOR BOTTOM ROLLER SLIDING DOOR HARDWARE SLIDING DOOR - SCREEN EXTENDED WIDTH (W) PLEATED MESH B. 14 BRIO TIMBEROLL 200 EXTERIOR BOTTOM ROLLER SLIDING DOOR HARDWARE HEIGHT 120 STACKING DOOR - SCREEN EXTENDED B. PULL HANDLE B. 79 BRIO 612 RETRACTABLE INSECT SCREEN (SCREEN CAN BE CUT DOWN 200mm MAX TO SUIT HEIGHT) 12 NOSE Product improvement is a continuous process. Please check specification at time of purchase. ISSUE 3 DATA SHEET G50B

7 Retrofit with Folding or Sliding Panels Application Suitable for residential screening of folding or sliding windows and doors with suitable outer frame for installation. Aluminium frame is available in three standard powder coat colours: black, silver and white. Custom colours are also available upon request. Assembled with high grade materials to ensure quality is maintained. UV stable pleated mesh and high strength, braided tensioning cords allow the screen to operate smoothly. Opening Specification Screen System: 612 Retrofit Frame For Individual Screens: Max Opening Height 3200mm Min Opening Height 600mm Max Opening Width 4500mm Min Opening Width 900mm Openings can use two screens in total, one screen in each direction providing a total span of 9000mm wide. Aluminium lengths are supplied in kits, for more information see Data Sheets G. Screen heights can be cut down by 200mm to accommodate exact sizes. Hardware Specification Screen: RSDLXXXX-XXXXXXX For RSDL sizing codes, see Data Sheet G. Channel: RSCE Powder coated aluminium channel with reinforced wall thickness. Track: Tall rack RSTTE Powder coated aluminium track with face fix screw point. Fixings not included. Jamb Mount: RSJE Powder coated aluminium jamb mount with face fix screw point. Fixings not included. Jamb Rebate: RSRE Powder coated aluminium jamb rebate with face fix screw point. Fixings not included. Jamb rebates not included in meeting retrofit kits. No. RSTTE E E No. KIT-X-RXXX SINGLE SCREEN KIT No. RSRE REBATE No. RSTTE E E No. KIT-X-RXXX MEETING SCREEN KIT No. RSDLXXXX-XXXXXXX SCREEN Brio, part of the Allegion family of brands. ISSUE 3 DATA SHEET G60

8 Retrofit with Folding or Sliding Panels SINGLE SCREEN EXTENDED X (NOT INCLUDED) WALL CONSTRUCTION WIDTH (W) PLEATED MESH B. 12 No. RSTTE 60 BRIO WEATHERFOLD 4s SHOWN AS REFERENCE* BRIO WEATHERFOLD 4s EXTERIOR FOLDING HARDWARE 14 X 12 E B. NOSE 12 X No. RSRE REBATE MEETING SCREEN EXTENDED D. 161 C. D. HEIGHT 120 C. PULL HANDLE BRIO 612 RETRACTABLE INSECT SCREEN (SCREEN CAN BE CUT DOWN 200mm MAX TO SUIT HEIGHT) D. 12 No. WS-MST MAGNETIC STRIP E No. WS-MP MAGNETIC PLATE 12 E X X 25 FLOOR *RETRO FIT SYSTEMS ARE SUITABLE TO ALL PRE-EXISTING FOLDING OR SLIDING DOOR SYSTEMS WITH SUITABLE OUTER FRAME Product improvement is a continuous process. Please check specification at time of purchase. ISSUE 3 DATA SHEET G60B