USB evaluation kits and reference tools

Transcription

1 evaluation kits and reference tools

2 NXP product summary Page UTMI+ Low Pin Interface (ULPI) transceivers ISP10 ULPI transceiver for systems with dual-role (host/peripheral) OTG ISP10 ULPI transceiver for standalone systems ISP10 ULPI transceiver for portable OTG systems ISP10x1 ULPI OTG transceiver for mobile & portables ISP10 ULPI OTG transceiver for mobile & portables, with hardware selection for frequency, SDR/DDR ISP102 ULPI OTG transceiver for mobile & portables ISP10 ULPI OTG transceiver for mobile & portables, 0.4-mm ball pitch, 38.4-MHz frequency On-The-Go (OTG) lers ISP101 OTG physical layer transceiver ISP102 OTG carkit transceiver with 50-mA charge pump ISP12 Single-chip OTG dual-role (host/peripheral) ler ISP11 Hi-Speed OTG dual-role (host/peripheral) ler Hub lers ISP120 Hi-Speed hub ler four downstream ports ISP121 Hi-Speed hub ler seven downstream ports Host lers ISP110 host ler for embedded applications ISP111A1 dual-role (host/peripheral) ler for embedded applications ISP1 Low-power Hi-Speed PCI host ler four downstream ports ISP1 Low-power Hi-Speed PCI host ler two downstream ports ISP10 Hi-Speed slave host ler for embedded applications Peripheral lers ISP111B peripheral ler (11.1 MB/s, 8/16-bit parallel bus) ISP11 Low-power peripheral ler (11.1 MB/s, 8-bit parallel bus, DMA) ISP12 Low-power Hi-Speed peripheral ler 16 endpoints ISP1 Low-power Hi-Speed peripheral ler 16 endpoints, ATA/ATAPI PDID12 peripheral ler (2 MB/s, 8-bit parallel bus) Transceivers ISP110x transceivers (ISP1102, ISP1104, ISP1105, ISP1106) ISP110 carkit physical layer transceiver ISP1110 transceiver with UART bypass

3 UTMI+ Low Pin Interface (ULPI) transceivers ULPI transceivers ISP150x/ISP170x (ISP1504, ISP1505, ISP1506, ISP1504x1, ISP1508, ISP1702, ISP1703) ISP150x/ISP170x evaluation kit Demonstrates ISP150x/ISP170x performance. Connects to cores via connector compliant with the ULPI Transceiver and Macrocell Tester (T&MT) interface. ISP150x ISP170x data & ULPI T&MT interface - ISP150x/ISP170x - User manual, schematics - Application note

4 On-The-Go (OTG) lers OTG physical layer transceiver ISP1301 ISP1301 evaluation kit Demonstrates OTG transceiver functions. Includes I 2 C-bus interface for configuring ISP1301 operating modes, accessing OTG status, and adjusting registers. Also includes analog audio interface. parallel PC parallel-to- I 2 C converter audio interface - Evaluation board with ISP1301 (HVQFN24 package) - Test software OTG ler or phone processor HC, DC, and OTG core logic interface connector core interface ISP1301 mini-ab - User manual OTG carkit transceiver ISP1302 with 50-mA charge pump ISP1302 evaluation kit Demonstrates OTG transceiver functions. Includes I 2 C-bus interface for configuring ISP1302 operating modes, accessing OTG status, and adjusting registers. Also includes analog audio interface. - Evaluation board with ISP1302 (HVQFN24 package) - Test software - User manual OTG ler or phone processor UART parallel audio interface PC parallel-to- I 2 C converter HC, DC, and OTG core logic interface connector core interface ISP1302 audio interface mini-ab NXP offers a ler driver that supports multi-threading and multi-tasking environments. This mature, OS-independent driver ports easily to popular RTOSs, including psos, μitron, VxWorks, and Nucleus. For more information, contact your local NXP sales office.

5 Single-chip OTG dual-role (host/peripheral) ler ISP1362 ISP1362 PCI/Linux OTG evaluation kit Standalone board connects to PCI slot of Linux-based PC. OTG and host stacks pre-tested for mass storage on OTG, mouse-to-otg port, speaker-to-otg port, HID class devices, and printer. Full support for Linux OS, with Class-compliant software stack ( Class driver unnecessary). Includes CPLD for local bus, configuration of ISP1362 signals, and interaction with integrated JTAG header. EEPROM stores configuration signals. EEPROM JTAG header local bus address/data CPLD local bus arbiter PCI bus (on PC) PLX9054 PCI to local bus interface local bus interrupt interrupts ISP1362 address & data bus bus signals - ISP1362 with PCI interface - Production-quality host, peripheral, OTG stacks - Linux OS support - Linux-based test applets ISP1362 PCI/WinCE.NET evaluation kit Same as Linux kit (above) but with support for WinCE.NET OS. address/data PCI bus (on PC) - ISP1362 with PCI interface - Production-quality host & peripheral stacks - WinCE.NET OS support EEPROM JTAG header local bus PLX9054 PCI to local bus interface local bus interrupt CPLD local bus arbiter interrupts ISP1362 address & data bus bus signals ISP1362 PXA255/Linux OTG evaluation kit Add-on kit, for use with PXA250/5 development platforms, with two add-on card host ports. Host stacks pre-tested for mass storage, mouse-to-host port, speaker-to-host port, HID-class devices, and printer. Full support for Linux OS, with Class-compliant software stack ( Class driver unnecessary). PXA250/5 development platform ISP1362 (OTG) handhelds PC or host devices - ISP1362 add-on card - Production-quality host, peripheral, OTG stacks - Linux OS support - Linux-based test applets - User manual, schematics

6 On-The-Go (OTG) lers (continued) ISP1362 PXA255/WinCE.NET kit Same as ISP1362 PXA255/Linux kit (page 5) but with support for add-on card WinCE.NET OS and licensable Class drivers. - ISP1362 add-on card PXA250/5 development platform ISP1362 (OTG) handhelds PC or host devices - Production-quality host & peripheral stacks - WinCE.NET OS support - Licensable Class drivers - User manual, schematics ISP1362 PCI/DOS OTG mini kit Same as ISP1362 PCI/Linux and PCI/WinCE.NET kits but with DOS-based software stacks for easy porting. Wasabi stack supports OTG and host operation: plays music in local and remote OTG peer environments, prints raster images, demonstrates SRP, HNP, hubs, and HIDs, and enumerates all devices. OTGC stack supports OTG ler operation: demonstrates SRP and HNP. X2 stack supports host ler operation: monitors host port, demonstrates mouse, performs enumeration and memory analysis, has read/write access to host register. EEPROM JTAG header local bus address/data CPLD local bus arbiter PCI bus (on PC) PLX9054 PCI to local bus interface local bus interrupt interrupts ISP1362 address & data bus bus signals - ISP1362 with PCI interface - DOS-based Wasabi stack for audio and printer applications - DOS-based OTGC stack for OTG ler operation - DOS-based X2 stack for host and mouse applications - User manual, schematics

7 Hi-Speed OTG dual-role (host/peripheral) ler ISP1761 ISP1761 PCI/Linux OTG evaluation kit Standalone board connects to PCI slot of a Linux-based PC. Uses device class drivers from Linux and ISP1761 software stack (included with kit) to demonstrate OTG and host functions at high-, full-, and low-speed data transfer rates. Includes CPLD for configuring ISP1761 signals. Three ports: two host-ler ports and one combination port for OTG, host, or peripheral ler operation. PCI bus PLX9054 PCI to local bus interface CPLD address/ data ISP1761 (OTG, host, or peripheral) - ISP1761 with PCI interface - Production-quality host, peripheral, OTG stacks ISP1761 PCI/WinCE evaluation kit Same as Linux kit (above) but with support for WinCE.NET OS. - ISP1761 with PCI interface - Production-quality host & peripheral stacks PCI bus PLX9054 PCI to local bus interface CPLD address/ data ISP1761 (OTG, host, or peripheral) ISP1761 PXA25x/Linux evaluation kit Add-on kit for PXA250 and PXA255 development platforms. Uses device class drivers from Linux and ISP1761 host stack (included with kit) to demonstrate host functions at high-, full-, and low-speed data transfer rates. Add-on card has three ports: two hostler ports and one combination port that supports OTG, host, or peripheral ler operation. generic processor extension bus data address ISP1761 (OTG, host, or peripheral) - ISP1761 add-on card for use with PXA250/5 development platforms - Production-quality host & peripheral stacks

8 Hub lers Hi-Speed hub ler ISP1520 with four downstream ports ISP1520 evaluation kit Connects to or Hi-Speed host port of any PC running Windows 98, Me, 2000, XP or Vista, or MacOS. - ISP1520 Hi-Speed or host or hub ISP1520 A A A A - PCB design guide - User manual, schematics Hi-Speed hub ler ISP1521 with seven downstream ports ISP1521 evaluation kit Connects to or Hi-Speed host port of any PC running Windows 98, Me, 2000, XP or Vista, or MacOS. A A - ISP PCB design guide - User manual, schematics Hi-Speed or host or hub ISP1521 A A A A A

9 Host lers host ler ISP1160 for embedded applications ISP1160 ISA/Linux evaluation kit Connects to bus of Linux-based PC for 16-bit of host function. Uses expansion bus to port finished software to any RISC-based PC (Linux OS) demo application development board. Linux host stack supports Class-compliant devices and has native support for commonly used applications: HID (mouse, keyboard), printer, mass storage, audio (speaker, mic), hub, network devices. Linux host stack API matches Linux kernel API. host stack class drivers firmware ISA adapter ISP1160 hub keyboard - ISP1160 with ISA add-on card - Linux host stack for kernel version Linux HCD software ISP1160 ISA/DOS evaluation kit Connects directly to ISA slot of PC. Uses DOS-based software for easy porting. Demonstrates enumeration, performing test bulk transfer, PC (DOS) demo application displays contents of ATL buffer, and can erase contents. - ISP1160 with ISA add-on card host stack class drivers firmware ISA adapter ISP1160 hub keyboard - DOS-based software for host & mouse functions ISP1160 PCI/DOS evaluation kit For printer and speaker applications; connects directly to PCI slot of PC. Uses DOS-based software stacks for easy porting. MP100 software: monitors port, demonstrates enumeration, performs test bulk transfer, displays contents of ATL buffer, can erase contents of host ler buffer memory. Kenobi2 software: accepts print image and WAV files, and supplies s for PrinterFile, Bulk, AudioFile, and ISO. EEPROM JTAG header local bus address/data CPLD local bus arbiter PCI bus (on PC) PLX9054 PCI to local bus interface local bus interrupt interrupts ISP1160 address & data bus bus signals - ISP1160 with PCI interface - DOS-based MP100 software for host and mouse functions - DOS-based Kenobi2 software for audio and printer functions NXP offers a ler driver that supports multi-threading and multi-tasking environments. This mature, OS-independent driver ports easily to popular RTOSs, including psos, μitron, VxWorks, and Nucleus. For more information, contact your local NXP sales office.

10 Host lers (continued) dual-role (host/peripheral) ler ISP1161A1 for embedded applications ISP1161A1 ISA/Linux evaluation kit Same as ISP1160 ISA/Linux evaluation kit but with ISP1161A1. PC (Linux OS) demo application - ISP1161A1 with ISA add-on card - Linux host stack for kernel version Linux HCD software host stack class drivers firmware ISA adapter ISP1161A1 hub keyboard - Sample application code ISP1161A1 ISA/DOS evaluation kit Same as ISP1160 ISA/DOS evaluation kit but with ISP1161A1. PC (DOS) demo application - ISP1161A1 with ISA add-on card - DOS-based software for host & mouse functions host stack class drivers firmware ISA adapter ISP1161A1 hub keyboard ISP1161A1 PCI/DOS evaluation kit Same as ISP1160 PCI/DOS evaluation kit but with ISP1161A1. PC (DOS) PCI bus - ISP1161A1 with PCI interface - DOS-based MP100 software for host and mouse functions MP100 (host/mouse) Kenobi2 ISP1161A1 printer audio device - DOS-based Kenobi2 software 10

11 Low-power Hi-Speed PCI host ler ISP1563 with four downstream ports ISP1563 evaluation kit Add-on card connects to the PCI slot of any PC installed with Windows 2000 Hi-Speed -enabled PC main board add-on card SP4, Windows XP SP2, or Windows Vista. Can be used to test legacy signals for on-board solutions. Supports 12- and 48-MHz clocks, offers simple, reliable overcurrent protection scheme, and LEDs that simplify debugging. Power management options support testing of system wake-up (useful for PCI ISP1563 A A A A motherboard and notebook designs). - ISP1563 add-on card - User manual, schematics - Application note Enhanced low-power Hi-Speed PCI host ler ISP1564 with two downstream ports ISP1564 evaluation kit Add-on card connects to the PCI slot of any PC installed with Windows 2000 Hi-Speed -enabled PC main board add-on card SP4, Windows XP SP2, or Windows Vista. Offers simple, reliable overcurrent protection scheme and LEDs that simplify debugging. Power management options support testing of system wake-up (useful for motherboard and notebook designs). PCI ISP1564 A A - ISP1564 add-on card - User manual, schematics - Application note 11

12 Host lers (continued) Hi-Speed slave host ler ISP1760 for embedded applications ISP1760 PCI/Linux evaluation kit Standalone board connects to the PCI slot of a Linux-based PC. Uses device class drivers from Linux and ISP1760 host stack (included with kit) to demonstrate host functions at high-, full-, and low-speed data transfer rates. Board includes a CPLD for configuring ISP1760 signals and has three host ports. PCI bus PLX9054 PCI to local bus interface CPLD address/ data ISP ISP1760 with PCI interface - Production-quality host stack ISP1760 PCI/WinCE evaluation kit Same as Linux kit (above) but with support for WinCE.NET OS. - ISP1760 with PCI interface - Production-quality host stack PCI bus PLX9054 PCI to local bus interface CPLD address/ data ISP1760 ISP1760 PXA255/Linux evaluation kit Add-on kit for PXA250 and PXA255 development platforms. Uses device class drivers from Linux and ISP1760 host stack (included with kit) to demonstrate host functions at high-, full-, and low-speed data transfer rates. Add-on card has three host ports. generic processor extension bus data address ISP ISP1760 add-on card for use with PXA250/5 development platforms - Production-quality host stack 12

13 Peripheral Controllers peripheral ler ISP1181B (11.1 MB/s, 8/16-bit parallel bus) ISP1181B microler evaluation kit Interfaces an 8-bit processor and demonstrates general functionality. host PC 8051 MCU ISP1181B - ISP1181B - Test application program - driver - ISP1181B firmware, driver ISP1181B PC evaluation kit Demonstrates functionality without emulator. Firmware can run from DOS and be debugged with Turbo C. Requires host PC with capability and peripheral PC host PC separate peripheral PC running ISP1181B firmware. ISA bridge board (used in peripheral PC) lets PC acts as peripheral, removing microler resource limitations. ISA bus ISA to local bus bridge ISP1181B - ISP1181B - ISA bridge board - ISP1181B firmware, driver firmware ISP1181B -to-rs-232 reference design Demonstrates -to-rs-232 serial port conversion. Uses ISP1181B as serial an I/O device with an 8-bit data bus. Data and command transfer between the ISP1181B and the asynchronous communications element uses only three endpoints. Built-in tasks include data streaming, host signaling and enumeration, configuration, and. Supports self-powered PC ISP1181B UART RS MCU serial modem or other serial device and bus-powered modes. Modem drivers for Windows 98, 2000, XP and Vista support a 56k modem (not included). - ISP1181B - ISP1181B firmware in C and assembly languages - Modem drivers (Windows 98, 2000, XP and Vista) 13

14 Peripheral lers (continued) Low-power peripheral ler ISP1183 (11.1 MB/s, 8-bit parallel bus, DMA) ISP1183 microler evaluation kit Interfaces to an 8-bit processor. ISP1183 appears as a memory device to host PC the microler, presenting an 8-bit data bus and a 1-bit address bus MCU ISP ISP Test application program - driver - ISP1183 firmware, driver ISP1183 PC evaluation kit Demonstrates functionality without emulator. Firmware can run from DOS and be debugged with Turbo C. Requires host PC with capability and peripheral PC host PC separate peripheral PC running ISP1181B firmware. ISA bridge board (used in peripheral PC) lets PC acts as peripheral, removing microler resource limitations. ISA bus ISA to local bus bridge ISP ISP ISA bridge board - ISP1183 firmware, driver firmware Low-power, Hi-Speed peripheral ler ISP1582 with sixteen endpoints ISP1582 Hi-Speed PCI/mass storage evaluation kit Connects to a PC s PCI slot to demonstrate parallel I/O and DMA capabilities. Supports Generic Processor Mode with separate address and data bus peripheral PC host PC operation. Requires host PC with capability and separate peripheral PC running generic PCI code. Mass Storage firmware provides bridge between and mass storage device. Pin headers can tap signals from PCI bus PCI to local bus bridge local to generic processor bus ISP1582 ISP1582. Board supports full- and high-speed enumeration. - ISP PCI Mass Storage firmware - Generic firmware - driver 14

15 Low-power, Hi-Speed peripheral ler ISP1583 with sixteen endpoints, ATA/ATAPI ISP1583 Hi-Speed Split Bus evaluation kit Implements an 8051-based scanner. Board includes an ISP1583 configured for Split Bus operation, an 8051-based microler, a CPLD that acts as the local DMA ler, and SRAM that stores data from DMA or parallel I/O access. host PC 8051 MCU CPLD data address ISP1583 SRAM data - ISP1583 configured for Split Bus operation - ISP1583 firmware, driver - VHDL code for CPLD ISP1583 Hi-Speed mass storage evaluation kit Implements a Hi-Speed -to-atapi bridge for an ATAPI-based storage device, demonstrating ATA/ATAPI interface for hard disk, CD-RW and DVD-RW drives (hard disk, CD, and DVD drives not included.) Performs fulland high-speed enumeration and uses pin headers to tap signals from the ISP based microler included on. host PC 8051 MCU address ISP1583 data IDE connector HDD or CD-ROM - ISP1583 with IDE interface - Class-compliant Mass Storage firmware 15

16 Peripheral lers (continued) peripheral ler PDID12 (2 MB/s, 8-bit parallel bus) PDID12 PC evaluation kit Demonstrates functionality without an emulator. Requires a host PC with capability and a separate peripheral PC running PDID12 firmware. peripheral PC host PC (with host ler) (Firmware runs from a DOS shell and can be debugged with Turbo C.) Kit removes the resource limitations of the processor/ler by connecting to the CPU via a 25-wire bus (that can be replaced by a 40-wire ISA bus ISA to local bus bridge PDID12 D12 bus in production) and by using an ISA bridge board in the peripheral PC so it acts as one large device. firmware - PDID12 - ISA bridge board - PDID12 firmware, driver PDID12 -EPP evaluation kit Demonstrates PDID12 operation with example DMA timing for scanner, main host PC printer, and digital camera applications. Main is used as a bridge connecting and EPP interfaces (IEEE 1284 parallel port); a daughter-board emulates the EPP function. Evaluation board includes EPP daughter board PDID12 an 8051 microler for enumeration, system initialization, EPP 8051 MCU CPLD negotiation, and DMA, plus a CPLD programmed to function as a DMA and EPP ler. Supports bidirectional DMA transfer and uses the full and EPP bandwidth. - PDID12 - EPP-based daughter board - VHDL code for CPLD and PAL equation - PDID12 firmware, driver 16

17 PDID12 smart evaluation kit Supports all PDID12 functions except DMA, and operates in three modes (print, scan, loop back) to emulate a variety of applications. On-board 8051 microler performs enumeration, system initialization, data flow, interrupt processing, button sensing and LED. Microler expansion bus supports use of an MCU Exbus main serial port 8051 MCU D12 Exbus PDID12 host PC in-circuit emulator and D12 expansion bus enables direct connection to an application circuit. Internal watchdog timer improves performance. suspend & resume - PDID12 - Firmware - Intel Hex code - driver PDID12 mass storage evaluation kit Emulates a removable drive in Windows environments. Evaluation board includes an 8051 microler for enumeration, system initialization, data flow, interrupt processing, button sensing, suspend & resume host PC LED, bulk-only transfer protocol, and reduced block commands. Hard disk and portable Flash memory not included. Complies with Mass Storage Class Specification (bulk only) MCU PDID12 CPLD (3) buffer CF header IDE header - PDID12 HDD power HDD conn - Windows 98 driver (Windows 2000, Me, XP and Vista have native driver support) - Sample firmware source code - User manual, schematics 17

18 Transceivers transceivers ISP110x (ISP1102, ISP1104, ISP1105, ISP1106) ISP110x transceiver evaluation kit (HBCC, TSSOP version) Demonstrates transceiver functionality using 16-pin HBCC or TSSOP format. - Evaluation board with ISP110x transceiver (HBCC or TSSOP package) - User manual, application notes, schematics ISP110x B ISP110x transceiver evaluation kit (HVQFN version) Demonstrates transceiver functionality using HVQFN package. Supports 14- and 16-pin formats. - Evaluation board with ISP110x transceiver (HVQFN package) - User manual, application notes, schematics ISP110x B carkit physical layer transceiver ISP1109 ISP1109 carkit transceiver evaluation kit Demonstrates transceiver functions for a carkit. Includes I 2 C-bus and SPI interfaces for configuring ISP1109 operating modes, and adjusting registers. Also includes an analog audio interface (optional) parallel PC parallel-to- I 2 C-bus converter audio codec supporting CEA-936-A, Mini- Analog Carkit interface. ISA-to-SPI ler ISP1109 B - Evaluation board with ISP1109 tranceiver (HVQFN32 package) - Test software peripheral ler or phone processor peripheral core logic interface connector core interface - User manual transceiver with UART bypass ISP1110 ISP1110 transceiver evaluation kit Demonstrates transceiver functions with UART signaling mode - Evaluation board with ISP1110 transceiver (HBCC16 package) - User manual UART ISP1110 B 18

19

20 NXP B.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: March 2007 Document order number: Printed in the Netherlands