USB Hub Controllers USB Host Controllers USB Dual-Role (Host/ Peripheral) Controllers. Carkit

Transcription

1 NXP USB products Application Matrix Application Carkit UTMI+ Low Pin Interface (ULPI) Transceivers USB On-The-Go (OTG) Controllers USB Hub Controllers USB Host Controllers USB Dual-Role (Host/ Peripheral) Controllers USB Peripheral Controllers USB Transceivers Digital still camera Digital TV Digital video camera Digital video recorder DVD recorder Dongle/bridge Game console Hub Hub: device bay Hub: docking station Hub: monitor Media player Mobile phone Modem: cable/dsl MP3/audio jukebox PC motherboard PCI host add-on card PDA Point-of sale (POS) Printer Printer: multifunction Router Scanner Set-top box Storage: CD/DVD Storage: keychain Storage: portable HDD Video conferencing Web appliance

2 UTMI+ Low Pin Interface (ULPI) Transceivers ISP1504 ULPI transceiver for systems with dual-role (host/peripheral) USB OTG } 8-bit data bus single data rate (SDR) mode } Chip-select pin polarity: active LOW } Clock frequency 19.2 MHz or 26 MHz } Accepts system clock frequency 60 MHz 3.0 V to 3.6 V, V CC(I/0) 1.65 V to 3.6 V } Charge pump: embedded (50 ma) and external supported; Low-power mode 35 µa } ISP1504ABS T&MT kit } ISP1504ACS T&MT kit } ULPI white paper } Interfacing to ISP1504/5/6 HVQFN32 (SOT617-1) 5 x 5 x 0.85 mm ISP1505 ULPI transceiver for standalone systems } Peripheral and host capability; OTG support: SRP } 8-bit data bus SDR mode } Clock frequency 19.2 MHz or 26 MHz } Accepts system clock frequency 60 MHz 3.0 V to 3.6 V, V CC(I/0) 1.65 V to 3.6V } Charge pump: external supported; Low-power mode 35 µa } ISP1505ABS T&MT kit } ISP1505ACS T&MT kit } ULPI white paper } Interfacing to ISP1504/5/6 HVQFN24 (SOT616-1) 4 x 4 x 0.85 mm ISP1506 ULPI transceiver for portable OTG systems } 4-bit bus double data rate (DDR) mode } Clock frequency 19.2 MHz or 26 MHz 3.0 V to 3.6 V, V CC(I/0) 1.65 V to 1.95 V } Charge pump: embedded (50 ma) and external supported; Low-power mode 35 µa } ISP1506ABS T&MT kit } ISP1506BBS T&MT kit } ULPI white paper } Interfacing to ISP1504/5/6 HVQFN24 (SOT616-1) 4 x 4 x 0.85 mm 2Q 2007 ISP1504x1 ULPI OTG transceiver for mobile and portable applications } 8-bit data bus SDR mode } Chip-select pin polarity: active LOW 3.0 V to 4.5 V, V CC(I/0) 1.65 V to 3.6 V } Clock frequency 19.2 MHz or 26 MHz } Charge pump: external supported } Power-down mode 0.5 µa when I CC < 10 µa; Low-power mode 50 µa } ISP1504A1 evaluation kit } ULPI white paper } Interfacing to ISP1504A1, ISP1702 TFBGA36 (SOT912-1) 3.5 x 3.5 x 0.8 mm

3 UTMI+ Low Pin Interface (ULPI) Transceivers ISP1508 ULPI OTG transceiver for mobile and portable applications with hardware selection for frequency, SDR/DDR } 8-bit data bus SDR mode or 4-bit DDR mode } Transparent UART mode } Chip-select pin polarity: in active HIGH and LOW options 3.0 V to 4.5 V, V CC(I/0) 1.4 V to 1.95 V } Clock frequency: 13 MHz, 19.2 MHz, 24 MHz, 26 MHz } Accepts system clock frequency 60 MHz } Charge pump: external supported } Power-down mode 0.5 µa when I CC < 10 µa; Low-power mode 50 µa } ISP1508 evaluation kit } ULPI white paper } Interfacing to ISP1508 TFBGA36 (SOT912-1) 3.5 x 3.5 x 0.8 mm ISP1702 ULPI OTG transceiver for mobile and portable applications } 8-bit data bus SDR mode } Transparent UART mode } Chip-select pin polarity: active LOW 3.0 V to 4.5 V, V CC(I/0) 1.4 V to 1.95 V } Clock frequency 19.2 MHz impedance 80 kω to 100 kω } Charge pump: external supported } Power-down mode 0.5µA when I CC < 10 µa; Low-power mode 50 µa } ISP1702 evaluation kit } ULPI white paper } Interfacing to ISP1504A1, ISP1702 TFBGA36 (SOT912-1) 3.5 x 3.5 x 0.8 mm Sampling 2Q 2007 ISP1703 ULPI OTG transceiver for mobile and portable applications with 0.4-mm ball pitch, 38.4-MHz frequency } 8-bit data bus SDR mode or 4-bit DDR mode } Transparent UART mode } Chip-select pin polarity: in active HIGH and LOW options 3.0 V to 4.5 V, V CC(I/0) 1.4 V to 1.95 V } Clock frequency 19.2 MHz, 26 MHz or 38.4 MHz } Accepts system clock frequency 60 MHz impedance 80 kω to 100 kω } Charge pump: external supported } Power-down mode 0.5 µa when I CC < 10 µa; Low-power mode 50 µa } ISP1703 evaluation kit } ULPI white paper } Interfacing to ISP1703 WLCSP x 2.25x 0.6 mm Sampling 2Q 2007

4 USB On-The-Go (OTG) Controllers ISP1301 USB OTG physical layer transceiver } Supports I 2 C-bus to access control and status registers } Dual supply voltages (main = 2.7 V to 4.5 V, digital I/O interface = 1.65 V to 3.6 V) } Charge pump regulator: output V BUS voltage 4.4 V to 5.25 V at current >8 ma, tunable by external capacitor } ISP1301 evaluation kit } N/A HVQFN24 (SOT616-1) ISP1302 USB OTG carkit transceiver (50-mA charge pump) } Supports carkit standard CEA-936-A (Nov 2005) } Supports both 4-wire and 5-wire signaling protocol for carkit application } Supports I 2 C-bus (up to 400 khz) to access control and status registers } On DP, DM lines, supports: - UART pass-through - service mode with 2.8 V UART signaling } Dual supply voltages (main = 3.0 V to 4.5 V, digital I/O interface = 1.4 V to 3.6 V) } Charge pump regulator: output V BUS voltage 4.4 V to 5.25 V at current >8 ma, tunable by external capacitor } ISP1302 evaluation kit } N/A HVQFN24 (SOT616-3) WLCSP25 Mass production 2Q 2007 Mass production 2Q 2007 ISP1362 USB OTG single-chip dual-role (host/peripheral) controller } Built-in charge pump for V BUS generation } Optional support for external V BUS source } Adjustable output current with external capacitor } Core operating voltage 3.3 V } Single supply voltage (3.0 V to 3.6 V) } ISP1362 PCI/Linux OTG kit } ISP1362 PCI/WinCE.NET kit } ISP1362 PXA255/Linux OTG kit } ISP1362 PXA255/WinCE.NET kit } ISP1362 PCI/DOS OTG mini kit } FlexiUSB stack for host } Simultaneous DMA and PIO access in the ISP116x, ISP118x, and ISP136x device controllers LQFP64 (SOT314-2) TFBGA64 (SOT543-1) ISP1761 Hi-Speed USB OTG dual-role (host/peripheral) controller } Memory-mapped CPU interface to any 32- or 16-bit interface } One OTG port and two downstream ports } Core operating voltage 1.8 V } Integrated, patent-pending Transaction Translator supports single EHCI for all data transfer speeds } ISP1761 PCI/WinCE kit } ISP1761 PCI/Linux OTG kit } ISP1761 PXA255/Linux kit } FlexiUSB stack for HS host & device } Interfacing ISP176x to Intel PXA25x processor } Embedded systems design with the ISP176x } ISP1761 peripheral DMA initialization } ISP1761 V BUS capacitance on dual-role ports } ISP1760/1 FAQs LQFP128 (SOT425-1) TFBGA128 (SOT857-1) Note: NXP FlexiUSB stack is a USB controller driver that supports a multi-threading and multi-tasking environment. This mature, OS-independent driver ports easily to popular RTOSs, including psos, μitron, VxWorks, and Nucleus. For more information, check with your nearest Sales Office. USB Hub Controllers ISP1520 Hi-Speed USB hub controller with four downstream ports } Dual supply voltages (3.3 V and 5.0 V) } Four downstream ports } ISP1520 eval kit } N/A LQFP64 (SOT314-2) ISP1521 Hi-Speed USB hub controller with seven downstream ports } Dual supply voltages (3.3 V and 5.0 V) } Seven downstream ports } ISP1521 eval kit } N/A LQFP80 (SOT315-1)

5 USB Host Controllers ISP1160 USB host controller for embedded applications } Two downstream ports } Host stack written in C } Single supply voltage (3.3 V or 5.0 V) } Integrated 5.0 V-to-3.3-V voltage regulator for bus-power support } Parallel interface between system processor and host controller (data transfer rate up to 15 MB/s) } Glueless interface to various microcontrollers and RISC processors } ISP1160 ISA/DOS kit } ISP1160 ISA/Linux kit } ISP1160 PCI/DOS kit } ISP1160 PXA25x/WinCE reference code } Handling Reset in the ISP116x } Interrupt Control in the ISP116x } Interfacing to Fujitsu SPARClite RISC, Intel StrongARM SA-1110, Hitachi SH7709, Motorola DragonBall EZ RISC, or NEC V832 RISC } ISP1160x embedded programming guide } ISP1160x low power consumption } ISP116x PTD Programming Guide LQFP64 (SOT314-2, SOT414-1) ISP1161A1 USB dual-role (host/peripheral) controller for embedded applications } Single supply voltage (3.3 V or 5.0 V) } Integrated 5.0 V-to-3.3-V voltage regulator for bus-power support } Dual-role capability (host only, peripheral only, or host and peripheral simultaneously) } Full-speed peripheral controller: one upstream port, 14 programmable endpoints, 11.1 MB/s (max) transfer rate between microprocessor and peripheral controller } Full-speed/low-speed host controller: two downstream ports, host stack in C, 15 MB/s (max) transfer rate between microprocessor and host controller } ISP1161A1 ISA/DOS kit } ISP1161A1 ISA/Linux kit } ISP1161A1 PCI/DOS kit } ISP1161A1 PXA25x/WinCE reference code } Handling Reset in the ISP116x } Interrupt Control in the ISP116x } Interfacing to Fujitsu SPARClite RISC, Intel StrongARM SA-1110, Hitachi SH7709, Motorola DragonBall EZ RISC, or NEC V832 RISC } ISP1161x embedded programming guide } Odd or even byte indicator in ISP1161A1 } ISP116x PTD Programming Guide } Simultaneous DMA and PIO access in the ISP116x, ISP118x, and ISP136x device controllers LQFP64 (SOT314-2, SOT414-1) ISP1563 Low-power Hi-Speed USB PCI host controller with four downstream ports } Direct interface to any 32-bit, 33-MHz interface } Single supply voltage 3.0 V to 3.6 V } Core operating voltage 1.8 V } Integrated two Original USB OHCI and one Hi-Speed USB EHCI host controllers } Four downstream ports } ISP1563 PCI eval kit } FlexiUSB stack for HS host } Designing a Hi-Speed USB Host PCI Adapter Using the ISP1562, ISP1563 LQFP128 (SOT420-1) ISP1564 Enhanced low-power Hi-Speed USB PCI host controller with two downstream ports } Direct interface to any 32-bit, 33-MHz interface } Single supply voltage 3.0 V to 3.6 V } Core operating voltage 1.8 V } Integrated two Original USB OHCI and one Hi-Speed USB EHCI host controllers } Two downstream ports } ISP1564 TFBGA PCI eval kit } ISP1564 LQFP PCI eval kit } FlexiUSB stack for HS host } Designing a Hi-Speed USB Host PCI Adapter Using the ISP1564 LQFP100 (SOT407-1) TFBGA100 (SOT926-1) ISP1760 Hi-Speed USB slave host controller for embedded applications } Memory-mapped CPU interface to any 32- or 16-bit interface } Three downstream ports } Dual supply voltage (main = 3.0 V to 3.6 V, digital I/O interface = 1.65 V to 3.6 V) } Core operating voltage 1.8 V } Integrated, patent-pending Transaction Translator supports single EHCI for all data transfer rates } ISP1760 PCI/Linux kit } ISP1760 PCI/WinCE kit } ISP1760 PXA255/Linux kit } FlexiUSB stack for high-speed host } Interfacing ISP176x to Intel PXA25x processor } Embedded systems design with the ISP176x } ISP1760/1 FAQs } Suspend and wake-up for the ISP1760 Host Controller LQFP128 (SOT425-1) TFBGA128 (SOT857-1) Note: NXP FlexiUSB stack is a USB controller driver that supports a multi-threading and multi-tasking environment. This mature, OS-independent driver ports easily to popular RTOSs, including psos, μitron, VxWorks, and Nucleus. For more information, check with your nearest Sales Office.

6 USB Peripheral Controllers PDIUSBD12 USB peripheral controller with 2 MB/s, 8-bit parallel bus } Eight-bit parallel bus with six endpoints, 320-byte FIFO } Bus-powered operation } 2 MB/s transfer rate: 1 MB/s in bulk mode, 1 Mb/s in ISO mode } Single supply voltage: (3.0 V to 3.6 V or 4.0 to 5.5 V) } D12 ISA PC eval kit } D12 smart eval kit } D12 USB-EPP eval kit } D12 mass storage eval kit } Using PDIUSBD12 in DMA mode } Interfacing to Hitachi H8S/2357 } PDIUSBD12 FAQ SO28 (SOT136-1) TSSOP28 (SOT361-1) ISP1181B USB peripheral controller with 11.1 MB/s, 8/16-bit parallel bus } 16-bit parallel bus with 16 endpoints, 2462-byte FIFO for ISO transfer } Bus-powered operation } 11.1 MB/s (max) transfer rate to processor or microcontroller } Single supply voltage (3.0 V to 3.6 V or 4.0 V to 5.5 V) } Integrated 5.0 V-to-3.3 V voltage regulator for bus-power support } ISP1181B PC eval kit } ISP1181B MCU eval kit } ISP1181B R232 eval kit } Interfacing to Hitachi SH7709 RISC processor } Interrupt control in ISP1181x } Simultaneous DMA and PIO access in the ISP116x, ISP118x, and ISP136x device controllers TSSOP48 (SOT362-1) HVQFN48 (SOT619-2) ISP1183 Low-power USB peripheral controller with 11.1 MB/s, 8-bit parallel bus, DMA } 8-bit parallel bus with 16 endpoints, 2462-byte FIFO for ISO transfer } Bus-powered operation } 11.1 MB/s (max) transfer rate to processor or microcontroller } Operating voltage (3.0 V to 3.6 V or 4.0 V to 5.5 V) } Integrated 5.0 V-to-3.3 V voltage regulator for bus-power support } ISP1183 PC eval kit } ISP1183 MCU eval kit } Simultaneous DMA and PIO access in the ISP116x, ISP118x, and ISP136x device controllers HVQFN32 (SOT617-1) ISP1582 Low-power Hi-Speed USB peripheral controller with 16 endpoints } High-speed and full-speed data transfer } 16-bit parallel bus with 16 endpoints, 8-kbyte FIFO } Supports generic-mode CPU interface only } Operating voltage 1.8 V } Main supply and digital I/O interface voltage 3.0 to 3.6 V } Can be bus-powered (with external voltage regulator), supporting current <100 ma } Low power consumption for portable devices } ISP1582 PCI eval kit } Special-function registers: differences between ISP1581 and ISP1582/3 } ISP1582/3 control pipe } Interfacing ISP1582 to PXA255 processor } ISP1582/3 Clearing IN Buffers } ISP1581/2/3 FAQs } Handheld Devices Using the ISP1582/83 } Interfacing the ISP1582/3 to the MCF5249 ColdFire Processor HVQFN56 (SOT684-1) ISP1583 Low-Power Hi-Speed USB peripheral controller with 16 endpoints and direct ATA/ATAPI connection } High-speed and full-speed data transfer } 16-bit parallel bus with 16 endpoints, 8 kbyte FIFO } Supports generic-mode and split bus mode CPU interfaces } Supports direct interface to any ATA/ATAPI device } Operating voltage 1.8 V } Can be bus-powered (with external voltage regulator), supporting current <100 ma } Low power consumption for portable devices } ISP1583 split bus kit } ISP1583 mass storage kit } Special-function registers: differences between ISP1581 and ISP1582/3 } ISP1582/3 control pipe } ISP1582/3 Clearing IN Buffers } ISP1581/2/3 FAQs } Handheld Devices Using the ISP1582/83 } Interfacing the ISP1582/3 to the MCF5249 ColdFire Processor } HDD PIO access and MTP implementation in ISP1583 HVQFN64 (SOT804-1) TFBGA64 (SOT543-1) 6 x 6 mm TFBGA64 (SOT969-1) 4 x 4 mm Mass production 2Q 2007

7 USB Transceivers ISP1102A USB transceiver with bidirectional input and V BUS detection } Low power, integrated 5.0 V-to-3.3-V voltage regulator } Dual supply voltages: main (3.0 V to 3.6 V), digital I/O interface (1.65 V to 3.6 V) } Bidirectional input mode only detection input (except in suspend mode) } Optimized for 3.3 V supply voltage } ISP1102 HBCC kit } ISP1102 HVQFN kit } ISP110x product selection guide } ISP110x interfacing ISP1102AW: HBCC16 (SOT639-2) ISP1102BS: HVQFN14 (SOT773-1) ISP1104 USB transceiver with differential or single-ended input and V BUS detection } Low power, integrated 5.0 V-to-3.3-V voltage regulator } Selectable differential or single-ended input mode detection input } ISP1102 HBCC kit } ISP110x product selection guide } ISP110x interfacing HBCC16 (SOT639-2) ISP1105 USB transceiver with variable data rate and differential or single-ended input } Low power, integrated 5.0 V-to-3.3-V voltage regulator } Selectable differential or single-ended input mode } ISP1105 HBCC kit } ISP1105 HVQFN kit } ISP110x product selection guide } ISP110x interfacing HBCC16 (SOT639-2) HVQFN16 (SOT758-1) ISP1106 USB transceiver with variable data rate and differential input } Low power, integrated 5.0 V-to-3.3-V voltage regulator } Differential input mode only } ISP1106 HBCC kit } ISP110x product selection guide } ISP110x interfacing HBCC16 (SOT639-2) TSSOP16 (SOT403-1) ISP1109 USB carkit transceiver } Peripheral transceiver supporting carkit standard CEA-936-A } SPI (up to 26 MHz) and I 2 C-bus (up to 400 khz) to access control and status registers } Supports UART pass-through on D+, D- lines } Dual supply voltage (main 3.0 V to 5.25 V, digital I/O interface 1.65 V to 3.6 V) } Supports OTG SRP } Power-down mode < 20 µa } ISP1109 eval kit } N/A HVQFN32 (SOT617-1) ISP1110 USB transceiver with UART bypass } Peripheral transceiver with bidirectional input mode only detection input } USB mode: 3.3-V signaling } Supports UART pass-through on D+, D- lines, 2.7-V UART signaling } Supply voltages (main 4.0 V to 5.5 V, digital I/O interface 1.65 V to 2.85 V, UART 2.7 V to 4.5 V) } Low power: < 20 µa USB suspend current, < 3 µa in power-off mode } ISP1110 eval kit } N/A HBCC16 (SOT639-2)

8 NXP B.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: February 2007 Document order number: Printed in the Netherlands