> > > > CBG076 CTIC Rev Connect Tech Inc. Pinout Information. Strip 1 cm x30. Hirose DF14-30S-1.25C

Transcription

1 Name HIrose Pin +VCC_PNL Strip cm x30 CBG076 CTIC VCC_PNL 2 GND 3 GND 4 LVDS_A3_N 5 LVDS_A3_P 6 LVDS_A_CLK_N 7 LVDS_A_CLK_P 8 Hirose DF4-30S-.25C GND 9 LVDS_A2_N 0 LVDS_A2_P LVDS_A_N 2 LVDS_A_P 3 LVDS_A0_N 4 LVDS_A0_P mm 30 GND 6 LVDS_B3_N 7 LVDS_B3_P 8 LVDS_B_CLK_N 9 LVDS_B_CLK_P 20 GND 2 LVDS_B2_N 22 LVDS_B2_P 23 LVDS_B_N 24 LVDS_B_P 25 LVDS_B0_N 26 LVDS_B0_P 27 GND 28 DID_CLK 29 DID_DAT 30. Cable is made from RoHS compliant components 2. Wire is 28 awg 3. Twisted pairs are indicated in the table above 4. Hirose DF4-30S-.25C must be used along with associated crimps DF4-2628SCF Part #: CTIC-0096 / CBG076 Date: 200/06/29

2 4-40 Hex Nut x2 CN VGA HD5 Female CBG070 CTIC-0080 Rev 0.0 Ribbon Cable 200 mm (bottom view) (left side view) 2x5 2mm IDC Socket Pin CN VGA (HD-5) Signal 0 Pin Header RED 2 GREEN 3 3 BLUE 5 4 NC - 5 GND 0 6 GND 2 7 GND 2 8 GND 2 9 NC - 0 GND 0 NC - 2 DDC DATA 8 3 HSync 7 4 VSync 9 5 DDC CLK 6. Cable is made from RoHS compliant component 2. Ribbon cable is mm pitch Revision History Revision 0.00 Description Initial 0.0 Flipped, pinout not changed Part #: CTIC-0080 / CBG070 Date: 200/09/0 Revision: 0.0

3 CN RJ45 (8P8C) Socket CBG065 CTIC-008 Rev Heat Shrink CAT5E 2x5 2mm 0-Pin Header Socket mm (right side view) < 20 mm 2 (bottom view) CN RJ45 (8P8C) Signal Color 0 Pin Header 2 MX- Orange MX+ White/Orange 2 6 MX2- Green 3 3 MX2+ White Green 4 - NC NC MX3- White/Blue 7 4 MX3+ Blue 8 8 MX4- Brown 9 7 MX4+ White/Brown 0 TIA/EIA-568-B T568B Wiring. Cable is made from RoHS compliant components. 2. Cable assembly uses a single RJ45(8P8C) Female Socket connector to a 2x5 (2mm pitch) 0-Pin Socket Header. 3. Signal Pairs MX+/-, MX2+/-, MX3+/-, Mx4+/- should all be s. 4. RJ45 socket connector must be rated for 000 Base=T Gigabit Ethernet 5. Cable must be CAT5E Alternate Connector, Part #: Drawn By: Date: Revision: CTIC-008 / CBG065 Matt Ferraro 200// This alternate connector option should only be used if the primary connector cannot be sourced. Pin must be indicated with a white dot (paint or ink)

4 Strip cm x8 CBG078 CTIC-0098 Pin Hirose DF3A-8S-.25C 500 mm Signal Hirose Pin +2 V +2 V 2 +5 V 3 +5 V 4 BKL_EN 5 +VCC_BKL 6 Ground 7 Ground 8. Cable is made from RoHS compliant components 2. Wire is 26 AWG, stranded, insulated 3. Hirose DF3A-8S-.25C must be used; along with required crimps DF3G-2630SCF or DF3G-2630SCFA Part #: CTIC-0098 / CBG078 Date: 200/06/29

5 2 3 4 CN CBG07 CTIC-0082 Rev 0.0 Heat Shrink Pin CN3 USB 2.0 Cable USB 2.0 Type A Female (Socket) Hirose DF3A-8S-.25C 90 mm 0 mm CN USB # Signal Color CN3 DF3 VCC RED 2 D- WHITE 2 3 D+ GREEN 3 4 GND BLACK 4 USB #2 4 GND BLACK 5 2 D- WHITE 6 3 D+ GREEN 7 VCC RED 8. Cable is made from RoHS compliant components, must be USB 2.0 compliant and 28 AWG 2. Both Signal Pairs D-/D+ must be 3. USB sockets must be USB 2.0 Type A Female 4. Hirose DF3A-8S-.25C must be used; along with required crimps DF3G-2630SCF or DF3G- 2630SCFA Revision History Revision Description Initial.4 connected to CN3.5,. connected to CN3.8 Part #: Drawn By: Date: Revision: CTIC-0082 / CBG07 Matt Ferraro 200/09/0 0.0

6 CBG073 CTIC-0083 Rev 0.0 DB-9 Male #2 DB-9 Male # PORT PORT 2 Ribbon Cable 200 mm (bottom view) (left side view) Pin 2x0 2mm IDC Socket DB9 # Signal 2x0 DCD 6 DSR Hex Nut x4 2 RXD 3 7 RTS 4 3 TXD 5 8 CTS 6 4 DTR 7 9 RI 8 5 GND 9-0 DB9 #2 DCD2 6 DSR2 2 2 RXD2 3 7 RTS2 4 3 TXD2 5 8 CTS2 6 4 DTR2 7 9 RI2 8 5 GND Cable is made from RoHS compliant components 2. Ribbon cable is mm pitch, 28 AWG Part #: CTIC-0083 / CBG073 Date: 200/07/9 Revision: 0.0

7 Pin 7 NOTE [2] NOTE [] NOTE [2] Pin 7 Pin CN CBG079 CTIC-0099 Pin KEY KEY CN SATA # Signal SATA#2 GND 2 A+ / Host TX+ 2 3 A- / Host TX- 3 GND 4 4 GND 5 B- / Host RX- 5 6 B+ / Host RX+ 6 7 GND 7 Notes [] Cable must SATA compliant, UL style 2725 [2] Connectors CN, must be SATA compliant [3] All material must be ROHS compliant Revision History Revision Description 0.00 Initial Part #: CTIC-0099 / CBG079 Date: 200/09/03

8 ATX Pin Signal ATX 20 pin Male Connector JST Pin 9 +5 V 7 Ground V 3 5 Ground V V standby 6 3 Ground 7 4 Pow er on 8 8 Pow er good V 0 3 Ground 0 +2 V Ground V 5 N/C N/C 6 N/C 7 N/C 8 N/C 20 N/C. Cable is made from RoHS compliant components 2. Wire is 22 awg 3. JST EHR-5 must be used along with associated crimps SEH-00T-P0.6L mm Part #: Drawn By: JST EHR-5 CBG074 CTIC-0084 CTIC-0084 / CBG074 Matt Ferraro Date: Revision: 200/06/

9 CBG080 CTIC Pin 2 mm 4 mm Momentary Pushbutton SPST-NO 200 mm 5VDC x2 2mm crimp housing Hirose A4B-2S-2C or similar. Cable is made from RoHS compliant components 2. Wire is 26 AWG, stranded, insulated 3 Operating temperature range -35C to 85C Part #: CTIC / CBG080 Date: 200/07/08

10 Molex Pin 2 3 Molex Disk Drive Power Connector Male (x4) Signal JST Pin +2 V 2 +2 V 3 Ground Ground 4 Ground 7 Ground 2 Ground 4 +5 V 4 50 mm CBG075 CTIC-0085 JST EHR V 3 +5 V 5 +5 V standby 6 N/C 8 N/C 9 N/C 0 N/C 5. Cable is made from RoHS compliant components 2. Wire is 22 awg 3. Right end must be JST EHR-5 must be used along with associated crimps SEH-00T-P0.6L 4. Left end must be Molex or equivalent Part #: CTIC-0085 / CBG075 Date: 200/06/29

11 CBG08 CTIC-0020 Pin Hirose DF3-3S-.25C. Cable is made from RoHS compliant components, 2. Wire must be 26 AWG 3. Hirose DF3A-3S-.25C must be used; along with required crimps DF3G-2630SCF or DF3G-2630SCFA Part #: CTIC-0020 / CBG08 Date: 200/07/08

12 CBG072 CTIC Green Heat Shrink Pin 6 pin Mini-DIN Female # (Mouse) 6 pin Mini-DIN Female #2 (Keyboard) Purple 80 mm < 20 mm Molex PS2 # Signal Molex PS2#2 MDAT GND 4 4 VCC 3 5 MCLK 6 - KDAT GND 4 4 VCC 3 5 KCLK Cable is made from RoHS compliant components 2. Cable is standard PS/2 type, for keyboards and mouse 3. 6 pin Mini-DIN are also none as PS/2 style connectors 4. Molex must be used; along with required female crimps Molex or Part #: CTIC-0086 / CGB072 Date: 200/06/29