Low Voltage and Medium Voltage Direct Replacement and Retrofill Circuit Breakers Selector Guide

Transcription

1 Low and Medium Direct Replacement and Retrofill Circuit Breakers Selector Guide Make the most of your energy SM

2 As switchgear reaches the end of its intended useful life, a viable, cost-effective strategy is to modernize the existing equipment with the latest state of the art circuit breakers. Modernizing existing equipment is a cost-effective solution to upgrade the capabilities of your electrical system with minimal downtime. Benefits of Modernizing Existing Switchgear Reduced costs for switchgear upgrades New circuit breakers are installed in existing switchgear Original footprint is left intact, saving time and money Upgrades can be performed on an incremental basis Less downtime for installation Downtime is minimized when compared with the demolition and replacement of existing equipment Enhanced equipment reliability New circuit breakers undergo complete factory testing and are backed by our standard equipment warranty For existing switchgear line-ups, we offer new customengineered direct replacement circuit breakers which are designed to fit into the existing switchgear cell with minimal modification and down-time. A direct replacement solution utilizes the upgraded technology of our Masterpact NT/NW insulated case circuit breaker for low-voltage systems or the Magnum circuit breaker for medium voltage systems. Reduced maintenance and operating costs New, easy-to-maintain operating mechanism Reduced need for difficult to obtain spare parts Designs available for ANY brand.

3 Medium Direct Replacement Designs Features of Magnum Medium Circuit Breakers Available in 5 kv to 15 kv versions Upgraded MVA ratings are available Low maintenance vacuum and SF6 arc interruption technology Designed to meet the requirements ofansi/ieee C37.59 standards High dielectric strength, moisture resistant primary insulation Nuclear certification available No arc by-product ventilated into the compartment Reduced power consumption of the control components Magnum Medium Circuit Breaker Magnum Type OEM Type Nominal Class 3-phase MVA Rating Max. Range Factor Withstand Test Continuous at 60 Hz Short Circuit at Rated Max. kv Interrupting Time Vacuum SF6 kv MVA kv rms K kv Peak A ka rms Cycles Designs for GE Magne-Blast AM Switchgear (Manufactured 1955 Present) N/A 5GYB AM , GTC* 5GYC* AM Fused 4.76 N/A Fused 5 5GSB2 5GYB AM , GSB1 5GYB AMH , GSB3 5GYB AM , GWB 5GYB AM GSB1 8GYB AM , 2000, GSB1 15GYB AM , GSB2 N/A AM , GSB N/A AM , 2000, 3000, GSB3 N/A AM-13.8 Tall-Boy Designs for Westinghouse DH Switchgear (Manufactured ) WSB 5WYB 50-DH , WSB 5WYB 50-DH , WSB N/A 75-DH , WSB N/A 150-DH , WSB N/A 150-DH , WSB N/A 150-DH , Designs for Westinghouse DHP Switchgear (Manufactured 1963 Present) 5WSB 5WYB 50-DHP WSB 5WYB 50-DHP , 2000, WSB 8WYB 75-DHP WSB 8WYB 75-DHP / , 2000, WTC* N/A 75-DHP 7.2 Fused 8.25 N/A Fused N/A 15WSB 15WYB 150-DHP , WSB 15WYB 150-DHP , * Contactor 3

4 Medium Direct Replacement Designs Magnum Type OEM Type Nominal Class 3-phase MVA Rating Max. Range Factor Withstand Test Continuous at 60 Hz Short Circuit at Rated Max. kv Interrupting Time Vacuum SF6 kv MVA kv rms K kv Peak A ka rms Cycles Designs for ITE Type HV Multimite Switchgear (Manufactured ) 5ISB N/A 5-HV ISB N/A 5-HV N/A 5IYB 5-HV Designs for ITE/ABB HK Metal-Clad Switchgear (Manufactured 1965 Present) 5ISB N/A 5-HK , ISB N/A 5-HK , ISB N/A 7.5-HK , ISB N/A 15-HK , ISB N/A 15-HK , ISB N/A 15-HK , 2000, Designs for Allis-Chalmers & Siemens-Allis Switchgear using Ruptair Air Magnetic Circuit Breakers (Manufactured 1944 Present) 5ASB2 N/A FA ASB1 5AYB MA , ASB1 5AYB MA , ASB N/A FB , ASB 15AYB FC, MC , ASB N/A FC, MC , 2000, AWB N/A FC , Designs for FPE Switchgear (Manufactured ) 5FSB N/A DST-DST , FSB N/A DST-DST , FSB N/A DST-DST , FSB N/A DST-DST , Designs for McGraw Edison PSD and WSA Switchgear (Manufactured 1965 Present) 15MSB N/A PSD , MSB N/A WSA , Designs for Square D/Merlin Gerin Switchgear 5MGSB2 N/A DSE MGSB3 N/A DSE MGSB4 N/A DSE MGSB4 N/A DSE MGSB4 N/A DSE MGSB4 N/A DSE MGSB5 N/A DSE , SSB N/A VAD2 (FG2) SSB N/A VAD2 (FG2) SSB N/A VAD , SSB N/A VAD , SSB N/A VAD SSB N/A VAD , SSB N/A VAD2 (FG2) ,

5 Low Direct Replacement Designs Masterpact Low Circuit Breaker OEM OEM Circuit Breaker Type Amps ka NT/NW Square D Breaker Type Allis Chalmers Federal Pacific Federal Pioneer General Electric Features of Masterpact NT/NW Circuit Breakers Direct replacements feature a drawout circuit breaker with three racking positions and status indicator on the cradle High ampere interrupting rating (AIR) High short-time current rating Retrofills are available either as a drawout or fixed mount, in 3- or 4-pole construction Available with integral ground-fault protection for equipment Protective relaying functions Optional zone-selective interlocking (ZSI), which can reduce damage in the event of a fault Field-installable accessories Constructions that meet UL 489, UL 1066, ANSI, IEC and CE Mark standards LA-600/LA NT LASB1-D2 LAF-600/LAF NT LASB2-D2 LAF NT LASB2 LA NW LASB3 FM-600 Fused NW LFSB9 FM-1600 Fused NW LFSB8 FP-25/FPS NT LFSB4 FPS NW LFSB7 FP NW LSFB5 FP-50-H3, 14 in. Frame (IEC) NT SE Can FP-50-H3, 21 in. Frame (ANSI) NW SE Can FP-50-H3, 21 in. Frame (IEC & ANSI) NW SE Can FP NW LFSB6 25HL NT SE Can 25HL NT SE Can 35HL NW LFSB1 50HL NW SE Can 65HL NW SE Can 75HL NW SE Can AE-1B (M.O.) NT LGSB18 AK-(1/2/3/4/5)-15/ NT LGSB6 AK-(2A/3A/4A/5A)-15/ NT LGSB1/7/11 AK-(1/2/3/4/5) NW LGSB10 AK-(2A/3A/4A/5A) NW LGSB4 AKR-30 (AKD-6 swgr) NW LGSB2D AKR-30 (AKD-6 swgr) NT LGSB13 AKR-30 DC NW LGSB5 AKR-30 (Powell swgr) NT LGSB8 AKR/AKRT-30 (AKD-8 swgr) NW LGSB2C AKR with Contactor N/A LGSC2 AKRU-30 (Single Position) NW LGSB14 AKR-50 (AKD-6 swgr) NW LGSB2 AKR/AKRT-50 (AKD-8 swgr) 1600/ NW LGSB2C AKR-50 (Powell swgr) NW LGSB9/9A AKR-50 DC (Hatch swgr) NW LGSB22 AKRU-50 (Single Position) NW LGSB17 AKR-75 (Three Position/Ver. Bus) NW LGSB12 AL-2-50 (M.O.) NW LGSB19 K NT LISB9 5

6 Low Direct Replacement Designs OEM OEM Circuit Breaker Type Amps ka NT/NW Square D Breaker Type ITE/ABB/BBC Square D Westinghouse/ Cutler Hammer/ Eaton K NT LISB9 K-600/K NT LISB1A K-600/K-800 (With MOC/TOC) NT LISB8 K-Don 600/ NT LISB11 K-Don NW LISB12 K-1600/K-1600S NW LISB2 K-2000/K-2000S ( With TOC) NW LISB5 KB NT LISB3 KC NW LISB4 MB-8/MBE NT LBSB1 MB-16/MBE NW LBSB2 LKE NT LISB6 MP-08 / MP NW LSSB2 MP NW LSSB3 MP-25 / MP NW LSSB4 SED NW LSSB1 SEM (SED-M) NW LSS5B DS NT LWSB7 DS-206H NW LWSB9 DS-206E NW LWSB9 DS NW LWSB9 DS-416S NW LWSB9 DS-416H NW LWSB9 DS NW LWSB9 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DB-15 (Three Position/in DB-25 cell) NT LWSB6 DB-25 (Three Position) NT LWSB1 DB-25 (Single Position) NT LWSB5 DBL-25 (Three Position) NT LWSB2 DB-50 (Single Position) NW LWSB4 DB-50 (Three Position) NW LWSB3 DS NT LWSB7 DS-206H NW LWSB9 DS-206E NW LWSB9 DS NW LWSB9 DS-416S NW LWSB9 DS-416H NW LWSB9 DS NW LWSB9 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DSII NW LWSB8 DS and DSII breakers are used Square D, Westinghouse, Cutler Hammer and Eaton legacy designs. 6

7 Masterpact Fixed or Drawout Breaker Upgrades Masterpact MP/MC/M Retrofill Solutions The Masterpact MP/MC/M retrofill kits allows Masterpact NW fixed and drawout cradles to be retrofit into an existing installation of Masterpact MP/MC/M devices. Masterpact MP/MC/M Plug and Play The original Masterpact M chassis is retained (no intervention on the switchboard structure) Masterpact NW adapted for the "Plug and Play" solution Masterpact M Masterpact MP/MC/M Retrofill Masterpact MP/MC/M Plug and Play The Mastepact MP/MC/M Plug and Play solution allows a factory-modified and adapted Masterpact NW drawout breaker to be installed into an original Masterpact MP/MC/M cradle. Retrofill or Plug and Play? Each one has its advantages. A Schneider Electric service engineer can assist you in evaluating your site situation and provide you with the optimal solution. The following chart gives you an overview of the availability of each solution. Short Circuit Rating N1 H1 Short Circuit Raiting N1 H1 Original Device Available Solution Original Device Available Solution MP/MC/M08 3P P&P, R P&P, R MP/MC/M08 4P R R MP/MC/M10 3P P&P, R P&P, R MP/MC/M10 4P R R MP/MC/M12 3P P&P, R P&P, R MP/MC/M12 4P R R MP/MC/M16 3P P&P, R P&P, R MP/MC/M16 4P R R MP/MC/M20 3P P&P, R P&P, R MP/MC/M20 4P R R MP/MC/M25 3P P&P, R P&P, R MP/MC/M25 4P R R MP30/MC32/M32 3P P&P, R P&P, R MP30/MC32/M32 4P R R MP/MC/M40 3P R R MP/MC/M40 4P R R MP/MC/M50 3P R R MP/MC/M50 4P R R Note: P&P Plug and Play Solution (drawout only), R Retrofill Solution (fixed and drawout). Trip unit and electrical accessory operation and wiring connections may not be identical between the Masterpact MP/MC/M and Masterpact NW circuit breakers. Product compatibility must be evaluated prior to installation of replacement circuit breaker. 7

8 Why Choose Schneider Electric Field Services? As part of Schneider Electric, the global specialist in energy management, you can count on Schneider Electric Field Services to help manage the life cycle of your equipment, no matter what brand it is. We will be there to support you now and in the years to come with our engineering services, maintenance and testing services, upgrade and modernization solutions and more. Our nationwide team of professional engineers and qualified field service representatives is committed to providing you with innovative solutions, best-in-class customer service, advanced technical support, and exceptional quality in everything we do! Our professional engineers are strategically located throughout the U.S. and collectively registered in every state Schneider Electric USA, Inc Crescent Park Drive West Chester, OH Tel: Fax: Our field service representatives are qualified, as defined by OSHA and NFPA 70E Our culture of safety helps mitigate your risks Our North American Operating Division is one of an elite group of companies to simultaneously hold the Robert W. Campbell Award (2009) and the Green Cross Award (2011). The National Safety Council has recognized Schneider Electric with over 50 Operational Excellence safety awards in each of the past three years. Any brand. Any industry. Any time. Find out more about how we can address your specific needs: All engineering services identified herein shall be provided by Schneider Electric Engineering Services, LLC, a wholly-owned subsidiary of Schneider Electric USA, Inc. This document is for information purposes only and is not meant to be construed as an offer to provide engineering services. Document Number 1910CT1401R02/15 Visit MondernizationandUpgradeSolutions February 2015 jw Schneider Electric. All Rights Reserved. Schneider Electric, Magnum, Masterpact, MicroLogic, Square D, and Make the most of your energy are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners.