KATHREIN-Werke KG ist jetzt KATHREIN SE KATHREIN-Werke KG is now KATHREIN SE

Transcription

1 P.O. Box Rosenheim Germany KATHREIN-Werke KG ist jetzt KATHREIN-Werke KG is now Rosenheim, Anton-Kathrein-Straße Rosenheim Germany Phone: Fax: Zum 1. Mai 2018 ist die KATHREIN-Werke KG auf die, einer Europäischen Aktiengesellschaft (Societas Europaea), übergegangen. Die neuen Firmendaten lauten seither wie folgt: Anton-Kathrein-Str Rosenheim, Deutschland Steuer-Nr.: 156/117/30745 UST-Ident-Nr.: DE Registergericht: Traunstein, HRB On 1 st May 2018, KATHREIN-Werke KG has been transferred to, a European stock corporation (Societas Europaea). Executive Board: Anton Kathrein (CEO), Joachim Döring, Elmar Geißinger, Jürgen Walter, Hans-Joachim Ziems Supervisory Board: Dr. Michael F. Keppel (Chairman) VAT Reg. No.: DE Tax ID No.: 156/117/30745 WEEE Reg. No.: DE GLN: Registered Office: Rosenheim, DE Commercial Register: Traunstein, HRB Deutsche Bank AG IBAN: DE BIC: DEUTDEMMXXX Since then the company data is as follows: Anton-Kathrein-Str Rosenheim, Deutschland Tax ID No.: 156/117/30745 VAT Reg. No.: DE Commercial Register: Traunstein, HRB a Page 1 of 1

2 Enables antenna and feeder sharing for two base stations in the same frequency band Suitable for two operators with frequency allocations within the same frequency band Very low Tx/Rx insertion loss compared to standard hybrid combiners Double unit for XPol antennas Suitable for indoor or outdoor applications DC/AISG by-pass for DTMA supply Tuning Diagram Technical Data Type No Double Unit Pass band BTS 1 (LTE/GSM1800 / Operator 1) BTS 2 (LTE/GSM1800 / Operator 2) Insertion loss Port 1 Port 3 / Port 4 Port 6 Port 2 Port 3 / Port 5 Port 6 Isolation Port 1 Port 2 / Port 4 Port 5 VSWR Impedance Input power Tx1 / Tx2 / Tx3 / Tx4 Rx1/Rx2 = MHz, Tx1/Tx2 = MHz Rx3/Rx4 = MHz, Tx3/Tx4 = MHz < 0.6 db ( MHz) / < 0.5 db ( MHz) < 0.5 db ( MHz) / < 0.6 db ( MHz) > 30 db ( / / / MHz) < 1.25 (pass bands) 50 Ω < 100 W / < 100 W / < 100 W / < 100 W Intermodulation products < -160 dbc (3 rd order; with 2 x 20 W) Temperature range C Connectors 7-16 female (long neck) Application Indoor or outdoor (IP 66) DC/AISG transparency (switchable) Port 1 Port 3 / Port 4 Port 6 Port 2 Port 3 / Port 5 Port 6 Lightning protection Mounting Weight Packing size (w x h x d) Dimensions (w x h x d) Stop By-pass (max ma) 3 ka, 10/350 μs pulse Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set 5.5 kg 367 x 307 x 185 mm 250 x 193 x 101 mm (without connectors, without mounting brackets) Page 1 of 4

3 Accessories (order separately) Type No. Clamp set suitable for mast diameter of mm mm mm mm mm mm Clamp Set 50-Ohm load Type No. Description Ohm load Block Diagram LTE / GSM 1800 LTE / GSM 1800 Please Note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of a mast mounted device or even cause it to fall to the ground. These facts must be considered during the site planning process. The Same-band Combiner is designed to operate under the environmental conditions as described in ETS class 4.1 E and have passed environmental tests as recommended in ETS The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the combiners and accessories. The limits for the coupling torque of RF connectors, recommended by the connector manufacturers must be obeyed. Terminate unused inputs with a suitable 50-Ohm load, e.g Any previous datasheet issues have now become invalid. Page 2 of

4 Typical Attenuation Curves BTS 1 (LTE/GSM 1800) Diagram I (Port 1 Port 3 / Port 4 Port 6) Diagram II (Port 1 Port 3 / Port 4 Port 6) BTS 2 (LTE/GSM 1800) Diagram III (Port 2 Port 3 / Port 5 6) Diagram IV (Port 2 Port 3 / Port 5 Port 6) Page 3 of 4

5 Dimensions Page 4 of