Features wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port

Transcription

1 Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC port Permanent damage may occur if any of these limits are exceeded. Coaxial Connections RF RF&DC DC GROUND Outline Drawing 30 dbm max. 30 V max. 500 ma 4.5 ohm typ. in (SMA female) out (SMA male) (feed-through pin) GROUND Features wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port Applications biasing amplifiers biasing of laser diodes biasing of active antennas DC return DC blocking test accessory FREQUENCY (MHz) INSERTION LOSS* (db) Electrical Specifications ISOLATION* (db) (RF port to DC port) (RF&DC port to DC port) CASE STYLE: Y460 Connectors Model SMA BRACKET (OPTION B ) ** (:1) L M U L M U L M U f L f U Typ. Max. Typ. Max. Typ. Max. Typ. Min. Typ. Min. Typ. Min. Typ. Max. Typ. Max. Typ. Max L= low range (f L to 10 f L ) M= mid range (10 f L to f U /2) U= upper range (f U /2 to f U ) * Insertion Loss and Isolation are guaranteed up to 20 dbm-rf power and 200mA DC current. ** measured with open and short at DC port. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Typical Performance Data Freq. (MHz) Pin (dbm) INSERTION LOSS (db) with Current ISOLATION (db) (Pin= -10dBm) with current (:1) 0mA 20mA 50mA 100mA 150mA 200mA 10mA 20mA 50mA 100mA 150mA 200mA Outline Dimensions ( inch mm ) A B C D E F G H J K L M N P Q R S T wt grams Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com REV. B M DJ/RS/CP/AM

2 Performance Charts INSERTION LOSS (db) ZFBT-4R2GW-FT+ INSERTION LOSS WITH CURRENT 0mA 100mA 200mA FREQUENCY (MHz) ISOLATION (db) ZFBT-4R2GW-FT+ ISOLATION WITH CURRENT 20 10mA 100mA 200mA FREQUENCY (MHz) 1.20 ZFBT-4R2GW-FT FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com

3 Bias Tee, Coaxial Typical Performance Data INSERTION LOSS with current ISOLATION with current FREQ. (RF Port to RF&DC Port) (RF Port to DC Port, RF&DC Port to DC Port) (MHz) (db) (db) (:1) 0mA 20mA 50mA 100mA 150mA 200mA 10mA 20mA 50mA 100mA 150mA 200mA REV. X Page 1 of 1

4 Bias Tee, Coaxial Typical Performance Curves Insertion Loss (db) Insertion Insertion Insertion Insertion Loss Insertion Insertion Insertion Frequency (MHz) Isolation (db) Isolation Frequency (MHz) Frequency (MHz) REV. X Page 1 of 1

5 Case Style Outline Dimensions Y Y460 CASE# A B C D E F G H J K L M N Y460 (31.75) (31.75) (19.05) (16.0) (9.15) (25.4) (25.4) (3.2) (3.2) (11.7) (55.4) (42.9) (1.5) CASE# P Q R S T WT. GRAMS Y (19.0) (12.7) (20.3) (11.4) (7.4) Dimensions are in inches (mm). Tolerances: 2 Pl. +.03; 3 Pl Notes: 1. Case material: Aluminum alloy. 2. Case finish: For RoHS Case Styles: Clear chemical conversion coating, non-chrome or trivalent chrome based. 3. Mounting bracket available on request. Add suffix B to part number 98-Y Rev.: G (07/21/16) M File: 98-Y Sheet 2 of 4 This document and its contents are the property of Mini-Circuits

6 Mini-Circuits Environmental Specifications ENV28 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Barometric Pressure 100,000 Feet MIL-STD-202, Method 105, Condition D Humidity 90% RH, 65 C Units may require bake-out after humidity to restore full performance. MIL-STD-202, Method 103 Thermal Shock -65 to 125 C, 5 cycles MIL-STD-202, Method 107, Condition B Vibration (High Frequency) 20g peak, Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 100g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-202, Method 213, Condition I ENV28 Rev: B 09/26/13 M File: ENV28.pdf This document and its contents are the property of Mini-Circuits. Page: 1