10G XENPAK to SFP+ Converter Module SL-XENPAK-SFP+

Transcription

1 10G XENPAK to SFP+ Converter Module SL-XENPAK-SFP+ Overview The Sourcelight SL-XENPAK-SFP+ Converter Module converts a 10 Gigabit Ethernet XENPAK port into a 10 Gigabit Ethernet SFP+ port. With the Converter Module, customers have the flexibility to use the 10 Gigabit XENPAK interface port of a switch with XENPAK modules or SFP+ modules. Features Converts the 10-Gigabit Xenpak interface into a single 10-Gigabit SFP+ interface Support on many platforms using Xenpak interfaces Compatible with Xenpak MSA Electrical Interface: XAUI Electrical Interface: Gbit/s Hot Pluggable Management and control via MDIO 2-wire interface Diagnostic Optics Monitoring Case Temperature Range: 0~ 70 C RoHS Compatible Applications 10GE Ethernet switches and routers 10GE Core-routers Other 10Gbps Ethernet Transmission Systems Ordering information Part Number GXK-SFP+ Product Description The Converter Module supports one small-form factor pluggable plus (SFP+) module and converts a 10 Gigabit Ethernet Xenpak port into a 10 Gigabit Ethernet SFP+ port. I/O Expansions Number of Expansion Slots Expansion Slots 1 (1 Total) SFP+ Network & Communication Network Technology 10GBase-X Physical Characteristics Form Factor Dimensions Internal 17.4mmHeight x 3 Width x Depth 1

2 Recommended Operating Conditions Parameter Min Typical Max Unit Notes Operating Temperature C non condensing Relative Humidity 5 95 % Electrical Pin-out Details Figure 1: Electrical Pin-out Details 2

3 Pin Definitions Pin No Name Dir Function Note 1 GND Electrical Ground 1 2 GND Electrical Ground 1 3 GND Electrical Ground V 5V Power Supply V 3.3V Power Supply 2 3.3V 3.3V Power Supply 2 7 APS Adaptive Power Supply 2 8 APS Adaptive Power Supply 2 9 LASI Link Alarm Status Interrupt (10-22k pull up on host) 10 RESET I TX OFF when MDIO RESET 3 11 VEND SPECIFIC 12 TX ON/OFF I Transmitter ON/OFF 3 13 RESERVED Not Used 3 14 MOD DETECT O Pull low inside module through 1k 15 VEND SPECIFIC 1 VEND SPECIFIC 17 MDIO I/O Management Data I/O 3, 4 18 MDC I Management Data Clock 3, 4 19 PRTAD4 I Port Address Bit 4 (Low=0) 3 20 PRTAD3 I Port Address Bit 3 (Low=0) 3 21 PRTAD2 I Port Address Bit 2 (Low=0) 3 22 PRTAD1 I Port Address Bit 1 (Low=0) 3 23 PRTAD0 I Port Address Bit 0 (Low=0) 3 24 VEND SPECIFIC 25 APS SET Feedback output for APS 2 RESERVED Reserved for Avalanche Photodiode use. 27 APS SENSE APS Sense Connection 28 APS Adaptive Power Supply 2 29 APS Adaptive Power Supply V 3.3V Power Supply V 3.3V Power Supply V 5V Power Supply 2 33 GND Electrical Ground 1 34 GND Electrical Ground 1 35 GND Electrical Ground 1 3 3

4 Notes: 3 GND Electrical Ground 1 37 GND Electrical Ground 1 38 RESERVED Not Used 39 RESERVED Not Used 40 GND Ground 1 41 RX LANE0+ O Module XAUI Output Lane RX LANE0- O Module XAUI Output Lane GND Electrical Ground 1 44 RX LANE1+ O Module XAUI Output Lane RX LANE1- O Module XAUI Output Lane GND Electrical Ground 1 47 RX LANE2+ O Module XAUI Output Lane RX LANE2- O Module XAUI Output Lane GND Electrical Ground 1 50 RX LANE3+ O Module XAUI Output Lane RX LANE3- O Module XAUI Output Lane GND Electrical Ground 1 53 GND Electrical Ground 1 54 GND Electrical Ground 1 55 TX LANE0+ I Module XAUI Input Lane TX LANE0- I Module XAUI Input Lane GND Electrical Ground 1 58 TX LANE1+ I Module XAUI Input Lane TX LANE1- I Module XAUI Input Lane GND Electrical Ground 1 1 TX LANE2+ I Module XAUI Input Lane TX LANE2- I Module XAUI Input Lane GND Electrical Ground 1 4 TX LANE3+ I Module XAUI Input Lane TX LANE3- I Module XAUI Input Lane 3-5 GND Electrical Ground 1 7 RESERVED Not Used 8 RESERVED Not Used 9 GND Electrical Ground 1 70 GND Electrical Ground 1 1) Ground connections are common for TX and RX. 2) All connector contacts are rated at 0.5A nominal. 3) 1.2V CMOS compatible. 4) MDIO and MDC timing must comply with IEEE802.3ae, Clause ) XAUI output characteristics should comply with IEEE802.3ae Clause 47. ) Transceivers will be MSA compliant when no signals are present on the vendor specific pins. 4

5 Mechanical Dimensions Figure 2: Mechanical Dimensions Shenzhen Sourcelight Technology Co., Ltd Sourcelight Technology reserves the right to make changes to or discontinue any optical link product or service identified in this document without notice in order to improve design and/or performance. If you have any question regarding this specification sheet, please contact our sales representative or send to 5