Agilent 3395 Integrator
|
|
|
- Shavonne Leonard
- 5 years ago
- Views:
Transcription
1 Agilent 3395 Integrator Operating Manual Agilent Technologies
2 Agilent 3395/3396 Integrators Manuals These manuals may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard s former test and measurement, semiconductor products and chemicals analysis businesses are now part of Agilent Technologies. The HP 3395/3396 Integrator referred to throughout this document is now the Agilent 3395/3396 Integrator.
3
4
5
6
7 ÉÉ É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É É
8
9
10
11
12 * LIST: *HELP ANALYZE ASSIGN BASIC BX COPY CREATE DATE
13 * # * TIME.5 CHT SP * LIST: CHT SP = 1.0
14 * DATR E 4/14/95 = DATE 4/14/95 INVALID SYSTEM COMMAND *
15
16
17
18
19
20
21 * REPORT RUN# 65 OCT 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID [CTRL D] * REPORT SAMPLE# 7 RUN# 65 OCT 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID SAMPLE# 7 * OP # 5 PRINT & POST-RUN LIST OPTIONS Large font [Y*/N]:
22 DEVICE ADDRESS: COMMAND STRING: ASSIGN 1,E:USER_INT.BAS CREATE TEMP.DAT,2048
23
24
25 * DATE 3/28/95 MAR 28, :00:20 * TIME 08:35:30 MAR 28, :35:30
26 * PLOT STOP * RUN # 1 MAR 28, :46:51 START STOP
27 START :
28 INTEGRATION PLOT TYPE (Source/Filtered/Unigram/No Plot) ENTER PLOT TYPE [S/F*/U/N]: * * Source Plot Filtered Plot Unigram Plot No Plot
29 INTEGRATION PLOT TYPE (Source/Filtered/Unigram/No Plot) ENTER PLOT TYPE [S/F*/U/N]: Presentation plot [Y/N*]:
30 * LIST: ZERO = 0, * ZERO START ZE@
31 * ATT 2^ START * ATT 2^ START
32 * CHT SP * CHT SP
33
34 *
35 * OP # 5 PRINT & POST RUN LIST OPTIONS Large font [Y*/N]: Store post run report [Y/N*]: External post run report [Y/N*]: List run parameters [Y/N*]: List timetable [Y/N*]: List calibration [Y/N*]: List remote method [Y/N*]: Form feed before report [Y/N*]: Form feed after report [Y/N*]: Skip perforations in report [Y/N*]: Skip perforations in plot [Y/N*]:
36 ZE ZE AT CS PW TH AR IF ST
37 * TIME.5 CHT SP * LIST: CHT SP = 7.0 * EDIT METH 1 = RUN PARAMETERS 2 = TIMETABLE EVENTS 3 = CALIBRATION FILE. SECTION TO BE EDITED: TIMETABLE EVENTS SELECT EVENTS FROM THE FOLLOWING MENU: [IF/EX/ZE/^Z/AT/CS/AR/TH/PW/ST] TIME: EVENT: VALUE:
38 * LIST: INTG # = AR REJ = CHT SP = INTG # = INTG # = 8 * DELETE TIME INTG # * LIST: AR REJ = CHT SP = 7.0
39 EMPTY * LIST: AR REJ = 66 * TIME.032 AR REJ * LIST: AR REJ = 100
40
41
42 * LIST: LIST PEAK CAPACITY: 1244 ZERO = 0, ATT 2^ = 0 CHT SP = 1.0 AR REJ = 0 THRSH = 0 PK WD = 0.04 * LIST: PK WD = 0.01
43
44 * PK
45 * TIME 1.00 PK * TIME 1.00 PK * TIME 1.01 PK
46 * THRSH
47 * AR REJ
48
49 IF IF
50 * TIME.3 INTG # * TIME.55 INTG # IF IF 0.574
51 * LIST: INTG # = INTG # = INTG # = 5
52 Error storing signal; FILE ALREADY OPEN
53 INVALID MUTE HOST CONVERSATION TIMETABLE
54 * OP # 4 REPORT OPTIONS Suppress local report [Y/N*]: * OP # 7 DEFAULT SAMPLE INFORMATION USE SAMPLE TABLE IN MANUAL RUN [Y/N*]: ISTD AMT [0.0000E+00 ]: SAMPLE AMT [0.0000E+00 ]: MUL FACTOR [1.0000E+00 ]: * OP # 4 REPORT OPTIONS Suppress local report [Y/N*]:
55 * PREP E = EXTERNAL STANDARD I = INTERNAL STANDARD N = NORMALIZATION CALIB PROCEDURE [E*/I/N]: REF % RTW [ 5.000]: NON-REF % RTW [ 5.000]: RF BASED ON AREA OR HEIGHT [A*/H]: CAL# RT AMT NAME 1 :
56 ÉÉ ÉÉ ÉÉ ÉÉ É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É É ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ É É
57
58
59
60
61
62
63 ÉÉ ÇÇÇÉÉÇÇÇ ÇÇÇÉÉÇÇÇ ÇÇÇÉÉÇÇÇ ÇÇÇÉÉÇÇÇ ÇÇÇÉÉÇÇÇ
64
65
66
67
68
69
70 ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ
71
72 É ÉÉ ÉÉ ÉÉ ÉÉ
73
74
75
76
77
78
79
80
81
82
83
84
85
86 ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉÉ ÉÉÉÉ
87 É ÉÉ ÉÉ ÉÉÉÉÉ ÉÉÉÉÉ ÉÉÉÉÉ ÉÉÉÉÉÉ ÉÉ ÉÉ ÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ
88
89
90
91
92
93 Response Factor:
94
95
96
97
98 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ
99
100
101
102
103
104 Point-to-point
105 Linear Non-linear (quadratic)
106
107 ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁ
108 ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ
109
110 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ
111 ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ
112 ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ
113 ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ
114 ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ
115 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ
116 ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
117 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
118
119 ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ
120 ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ
121 ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ
122 ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁ ÁÁÁÁÁÁÁ
123
124
125
126 NO RUN PEAKS STORED. CALIB EXISTS E = EXTERNAL STANDARD I = INTERNAL STANDARD N = NORMALIZATION CALIB PROCEDURE (E*/I/N): E
127 REF % RTW [ 5.000]: REF % RTW [ 5.000]: ÈÈÈ ÈÈÈ ÈÈÈ ÈÈÈ ÈÈÈ NON-REF % RTW [ 5.000]: RF BASED ON AREA OR HEIGHT [A*/H]:
128 CAL# RT AMT NAME 1 : CAL# RT AMT NAME 1 :.082 :10 :S1 2 :.173 :5 :S2 3 :.498 NO MATCH :S
129 REF PK CAL#: ISTD CAL#: GROUP PEAKS [Y/N*]: CALIBRA- TION options GRP# CAL# NAME 1 : NAME GRP# CAL# NAME 1 :7,9,10 :BUTENE
130 CALIBRATION OPTIONS RF of uncalibrated peaks [0.0000E+00 ]: Replace calibration fit [Y/N*]: Disable post-run RT update [Y/N*]: ISTD AMT [0.0000E+00 ]: SAMPLE AMT [0.0000E+00 ]: MUL FACTOR [1.0000E+00 ]: ISTD AMT SAMPLE AMT MUL FACTOR SAMPLE AMT MUL FACTOR MUL FACTOR MUL FACTOR
131 CALIBRATION OPTIONS RF of uncalibrated peaks [0.0000E+00 ]: Replace calibration fit [Y/N*]: P = point-to-point L = linear N = non-linear (quadratic) Calibration fit [N/L/P*]: Point-to-point
132 Linear Non-linear (quadratic) CAL# RT AMT 1 : rr.rrr :
133
134
135 AMT/AREA AMT/HEIGHT * EDIT CALIB 1 = CALIB PROCEDURE 2 = RETENTION TIME WINDOWS 3 = TABLE ENTRIES 4 = PEAK GROUPS 5 = CALIB options SECTION TO BE EDITED:
136 * OP() CALIBRATION OPTIONS RF of uncalibrated peaks [0.0000E+00 ]: Replace calibration fit [Y/N*]: P = point-to-point L = linear (least square) N = non-linear (quadratic) Calibration fit [N/L/P*]: Disable post-run RT update [Y/N*]: ISTD peak #: ISTD AMT [1.0000E+00 ]: SAMPLE AMT [0.0000E+00 ]: MUL FACTOR [1.0000E+00 ]: Replace calibration fit Calibration fit ISTD peak # ISTD CAL#
137 NO CALIB TBL. * LIST: CALIB ISTD REF % RTW: NON-REF % RTW: LEVEL: 1 RECALIBRATIONS: 1 CAL# RT LV AMT AMT/AREA 1& E E CAL# 1 NAME CALIBRATION options RF of uncalibrated peaks E+00 Calibration fit... P Disable post-run RT update.. NO ISTD peak #... 1 ISTD AMT... 1 SAMPLE AMT E+00 MUL FACTOR E+00
138 DELETE ALL [Y/N*]: * DELETE CALIB * EDIT CALIB 1 = CALIB PROCEDURE 2 = RETENTION TIME WINDOWS 3 = TABLE ENTRIES 4 = PEAK GROUPS 5 = CALIB OPTIONS SECTION TO BE EDITED: CAL#:
139
140
141 * OP() DEFAULT SAMPLE INFORMATION USE SAMPLE TABLE IN MANUAL RUN [Y/N*]: ISTD AMT [0.0000E+00 ]: SAMPLE AMT [0.0000E+00 ]: MUL FACTOR [1.0000E+00 ]: RECALIBRATION [Y/N*]:
142 LEVEL [0 ]: NAME: REPORT MEMO: * OP # 7 * LIST: OP # 7 DEFAULT SAMPLE INFORMATION USE SAMPLE TABLE IN MANUAL RUN. NO ISTD AMT E+00 SAMPLE AMT E+00 MUL FACTOR E+00 RECALIBRATION NO SAMPLE NAME REPORT MEMO
143
144
145
146
147 * *H:
148 *SY RS-232-C SWITCH SETTINGS Baud 9600 Timeout 15 sec Handshake Delay Off Hardware Handshake Disabled INTERNAL SERIAL NUMBER: 22390
149
150 * OP # 2 RUN DATA STORAGE Store signal data [Y/N* Device [M*]: Bunched or raw data [B/R*]: ] Local run-time storage [Y/N*]: Keep run-time storage [Y/N*]: Store processed peaks [Y/N*]: * OP # 2 RUN DATA STORAGE Store signal data [Y/N* Device [M*]: M:SIGNAL.BNC
151 CAUTION: Previous signal data will be lost Bunched or raw data [B/R*]: Store processed peaks Local run-time storage [Y/N*]: Copying signal file to host
152 Keep run-time storage [Y/N*]: Deleting local signal file Store processed peaks [Y/N*]:
153 * STORE M:METH20.MET * OP # 5 PRINT & POST-RUN LIST OPTIONS Large font [Y*/N]: Store post-run report [Y/N*]: Device [M*]:
154 *DI VOLUME NAME: MDISK DRIVE: M DATE: JAN 8, :20:13 FILE NAME LENGTH CREATED/VERSION SIG_BUFF.RAW /05/90 14:48:02 LU1.MET /03/90 18:04:45 PROG.BAS /05/90 15:07:35 USED FREE MAX FILES BYTES
155 FREE MAX FREE USED MAX LENGTH FREE MAX FREE USED MAX
156 *COPY M:CA1.CAL,M:CA1.CAL *RENAME M:SIGNAL.BNC,M:RUN5.BNC
157 *PURGE M:METH1.MET
158
159
160
161
162
163
164 * HEIGHT% report [Y/N*]: ENTER PLOT TYPE [S/F*/U/N]:
165 * PREP METH RUN PARAMETERS ZERO [ 0 ]: ATT 2^ [ 0 ]: CHT SP [ 1.0 ]: AR REJ [ 0 ]: THRSH [ 0 ]: PK WD [ 0.04 ]: TIMETABLE EVENTS DELETE CURRENT TABLE [Y/N*]:
166 TIMETABLE EVENTS SELECT EVENTS FROM THE FOLLOWING MENU [IF/EX/ZE/^Z/AT/CS/AR/TH/PW/ST] TIME: EVENT: VALUE: TIME:
167 TIME:.30 EVENT: PW ] VALUE:.05 TIME:.8 [ EVENT: ST VALUE:?
168 REPLACE CURRENT CALIBRATION [Y/N*]: CALIBRATION FILENAME: CALIBRATION FILENAME: CALIBRATION FILENAME:
169 INTEGRATION PLOT TYPE (Source/Filtered/Unigram/No Plot) ENTER PLOT TYPE [S/F*/U/N]: Presentation plot [Y/N*]: RUN DATA STORAGE Store signal data [Y/N*]: Device [M*]: CAUTION: Previous signal data will be lost Bunched or raw data [B/R*]: Store processed peaks [Y/N*]:
170 REPORT OPTIONS Suppress local report [Y/N*]: HEIGHT% report [Y/N*]: Replace report title [Y/N*]: Report title: Replace amount label [Y/N*]: Report uncalibrated peaks [Y/N*] Extended report [Y/N*]: PRINT & POST-RUN LIST OPTIONS Large font [Y*/N]: Store post-run report [Y/N*]: Device [M*]: List run parameters [Y/N*]: List time table [Y/N*]: List calibration table [Y/N*]: Form feed before report [Y/N*]: Form feed after report [Y/N*]: Skip perforations in report [Y/N*]:
171
172 * STORE METH * LOAD METH ATTEMPTED WRITE PAST END OF FILE. DISK FULL.
173 * EDIT METH 1 = RUN PARAMETERS 2 = TIMETABLE EVENTS 3 = CALIBRATION FILE 4 = INTEGRATION PLOT TYPE 5 = RUN DATA STORAGE OPTIONS 6 = REPORT OPTIONS 7 = POST-RUN LIST OPTIONS 8 = REMOTE DEVICE ACCESS SECTION TO BE EDITED: SECTION TO BE EDITED: REMOTE DEVICE ACCESS
174 FILE NOT FOUND.
175 * LIST METH RUN PARAMETERS ZERO = 0 ATT 2^ = 2 CHT SP = 1.0 AR REJ = 0 THRSH = 2 PK WD = 0.01 TIMETABLE EVENTS PK WD = STOP CALIBRATION NORM REF % RTW: NON-REF % RTW: LEVEL: 1 RECALIBRATIONS: 1 CAL# RT LV AMT AMT/HEIGHT 1R E E E E 06 3R E E E E 03 5R E E 04 CAL# NAME 1 PK1 2 PK2 3 PK3 4 PK4 5 PK5 GRP# CAL# NAME 1 2, 4, GRP1 2 3, 5, GRP2 3 4, 5, GRP3 4 2, 4, 5, GRP4 5 1, 3, 5, GRP3
176 INTEGRATION PLOT TYPE... FILTERED Presentation plot... NO RUN DATA STORAGE Store signal data... YES Device... M Bunched or raw data... BUNCHED Store processed peaks... NO CALIBRATION OPTIONS RF of uncalibrated peaks E+00 Calibration fit... P Disable post-run RT update.. NO MUL FACTOR E+00 REPORT OPTIONS Suppress local report... NO Height% report... NO Report title: SLUDGE Amount label... GMS Report uncalibrated peaks... YES Extended report... YES PRINT & POST-RUN LIST OPTIONS Large font... YES Store post-run report... NO List run parameters... YES List timetable... YES List calibration table... NO Form-feed before report... NO Form-feed after report... NO Skip perforations in report. NO Skip perforations in plot... NO
177 * DELETE METH
178
179 * LIST: RUN PARAMETERS ZERO = 0 ATT 2^ = 0 CHT SP = 1.0 AR REJ = 0 THRSH = 0 PK WD = 0.04 TIMETABLE EVENTS EMPTY CALIBRATION NO CALIB TBL INTEGRATION PLOT TYPE... FILTERED Presentation plot... NO RUN DATA STORAGE Store signal data... NO Store processed peaks... NO REPORT OPTIONS Suppress local report... NO HEIGHT% report... NO Report uncalibrated peaks... NO Extended report... NO PRINT & POST-RUN LIST OPTIONS Large font... YES Store post-run report... NO List run parameters... NO List timetable... NO List calibration table... NO Form-feed before report... NO Form-feed after report... NO Skip perforations in report. NO Skip perforations in plot... NO
180
181
182
183
184 * BOTTLE OR RUN SAMPLE INDEXED [R/B*]:
185 RUNS WAIT FOR START_INPUT: [Y/N*] REMOTE_START_RELAY: PRERUN/RUN [P/R*] Select the START mode you desire.
186 EQUILIBRATION TIME IN SECONDS [0 ]: REMOTE READY SENSING [C/S*]
187 METHOD [*]: CAUTION: Cannot get method file. FILE NOT FOUND NOT LOADED
188 Delete Sample Table [Y/N*]: 5. BOTTLE OR RUN SAMPLE INDEXED [R/B*]: USE SAMPLE TABLE IN MANUAL RUN [Y/N*]:.
189 FIRST BOTTLE [1 ]: FIRST RUN [1 ]: LAST BOTTLE [1 ]: LAST RUN [1 ]: BOTTLE # : RUN # : ISTD AMT: SAMPLE AMT: MUL FACTOR:
190 RECALIBRATION [Y/N*]: LEVEL: NAME REPORT MEMO BOTTLE #: RUN #: NEXT SEQUENCE: Caution: Cannot get sequence file.
191 WAITING FOR SYSTEM READINESS EQUILIBRATION DELAY IN PROGRESS FILE NOT FOUND NOT LOADED DISK DOES NOT EX- IST FIRST BOTTLE # RUN # LAST BOTTLE # RUN # FIRST RUN # LAST RUN # INVALID INDEX; ABORTED.
192
193
194 BOTTLE # USE SAMPLE TABLE IN MANUAL RUN [Y/N*]:
195 RUN # FIRST RUN # LAST RUN # USE SAMPLE TABLE IN MANUAL RUN [Y/N*]: FIRST RUN #
196 * EDIT SEQ 1 = EQUILIBRATION TIME DELAY 2 = METHOD FILE SPECIFICATION 3 = SAMPLE INFORMATION TABLE 4 = NEXT SEQUENCE SPECIFICATION SECTION TO BE EDITED: SAMPLE INFORMATION TABLE BOTTLE OR RUN NUMBER INDEXED [R/B*]: FIRST RUN [1 ]: LAST RUN [1 ]:... * OP # 7 DEFAULT SAMPLE INFORMATION USE SAMPLE TABLE IN MANUAL RUN [Y/N*]: ISTD AMT [1.0000E+O1 ]: *SET RUNNUM
197 FILE NOT FOUND SEQ NOT CHANGED SEQ NOT CHANGED DEFAULT SEQ INVOKED
198 1 = EQUILIBRATION TIME DELAY 2 = METHOD FILE SPECIFICATION 3 = SAMPLE INFORMATION TABLE 4 = NEXT SEQUENCE SPECIFICATION SECTION TO BE EDITED: BOTTLE # RUN # RUN #:
199 FILE NOT FOUND * LIST: SEQ RUNS WAIT FOR START_INPUT: [Y/N*]...Y REMOTE_START_RELAY: PRERUN/RUN[P/R*]..P EQUILIBRATION TIME IN SECONDS...5 METHOD... METH1.MET SAMPLE INFORMATION TABLE BOTTLE OR RUN SAMPLE INDEXED... R FIRST RUN... 5 LAST RUN RUN #... 5 ISTD AMT E+00 SAMPLE AMT E+00 MUL FACTOR E+00 RECALIBRATION... NO NAME... GROUP A NEXT SEQUENCE... SEQ2.SEQ
200
201
202
203 * AREA% RUN# 65 OCT 5, :01:32 SAMPLE# 7 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID AREA% RT AREA TYPE WIDTH AREA% PP PB PB SBB BV VB BB TOTAL AREA=1.4477E+07 MUL FACTOR=1.0000E+00
204 * LIST: OP # 4 REPORT OPTIONS Suppress local report NO HEIGHT% report NO Report uncalibrated peaks NO Extended report NO
205 * OP # 4 REPORT OPTIONS Suppress local report [Y/N*]: HEIGHT% report [Y/N*]: Replace report title [Y/N*]: * AREA% RUN# 5 OCT 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC PEAK FILE : M:Q1EBBE6F.PRO REPORT #5 SAMPLE# 5 HEIGHT% RT HEIGHT TYPE WIDTH HEIGHT% BB I BH TOTAL HEIGHT= MUL FACTOR=1.0000E+00
206
207 * OP # 4 REPORT OPTIONS Suppress local report [Y/N*]: HEIGHT% report [Y/N*]:
208 Replace report title [Y/N*]: Report title: Replace amount label [Y/N*]: Report uncalibrated peaks [Y/N*]: Extended report [Y/N*]: RT TYPE AREA WIDTH HEIGHT CAL# AMOUNT NAME
209 RT AREA TYPE CAL# AMOUNT * OP # 5 PRINT & POST-RUN LIST OPTIONS Large font [Y*/N]: Store post-run report [Y/N*]: Device [M*]: List run parameters [Y/N*]
210 List timetable [Y/N*]: EMPTY List calibration table [Y/*N]: Form-feed before report [Y/N*]: Form-feed after report [Y/N*]: Skip perforations in report [Y/N*]: Skip perforations in plot [Y/N*]:
211 * (USE BREAK OR CONTROL-Y TO END) Testing column conditioning; First pass operator is Kate * BREAK * ID Flavors Lab1 * REPORT RUN# 19 FEB 18, :24:00 IDENTIFIER : Flavors Lab1
212 Store post-run report [Y/N*]: Device [M*]:
213 RUN# 7 JAN 15, :22:08 SAMPLE NAME: SAMPLE NAME REPORT MEMO IDENTIFIER: LAB1 GC3 SIGNAL FILE: M:SIGNAL.RAW REPORT FILE: M:Q1FE0F80.RPT REPORT TITLE ISTD PEAK NOT MATCHED SAMPLE# 90
214
215
216 MUL FACTOR WIDTH AREA% HEIGHT% WIDTH RUN# 65 JUL 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID SAMPLE# 7 ESTD-AREA RT AREA TYPE CAL# AMOUNT BV VB BB 3R TOTAL AREA=1.4477E+07 MUL FACTOR=1.0000E+00
217
218 RUN# 65 JUL 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID SAMPLE# 7 ESTD-AREA RT AREA TYPE CAL# AMOUNT BV VB BB 3R TOTAL AREA=1.4477E+07 MUL FACTOR=1.0000E+00 RUN# 65 JUL 5, :01:32 SIGNAL FILE: M:SIGNAL.BNC TECH PROPIONIC ACID SAMPLE# 7 ESTD AREA RT TYPE AREA WIDTH HEIGHT CAL# AMOUNT NAME.138 PP PB PB SBB BV PPA VB IBTA BB R BTA TOTAL AREA=1.4477E+07 MUL FACTOR=1.0000E+04
219 * RUN # 18 JAN 1, :53:11 START IF CS8@ : AT TIMETABLE STOP
220 TIMETABLE STOP
221
222
223
224
225
226
227
228
229
230
231
232
233
234 Agilent Technologies Agilent Technologies, Inc. 08/97 Part Number
Agilent 3396 Series III Integrator
Agilent 3396 Series III Integrator Operating Manual Agilent Technologies Agilent 3395/3396 Integrators Manuals These manuals may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard
Agilent 3395/3396 Integrator
Agilent 3395/3396 Integrator Tutorial Agilent Technologies Agilent 3395/3396 Integrators Manuals These manuals may contain references to HP or Hewlett-Packard. Please note that Hewlett-Packard s former
0LOOLRQV (QGLQJÃ%DODQFHVÃKDYHÃEHHQÃUHGXFHG PHHWÃGHEWÃVHUYLFHÃDQGÃRSHUDWLQJ FDVKÃIORZÃUHTXLUHPHQWV \HDUV SURMHFWHGÃLQÃ )LVFDOÃ<HDU
0LOOLRQV 7KHÃ6DOHVÃ7D[Ã7UDQVIHUÃLV DVVXPHGÃWRÃEHÃFDSSHGÃLQ )
Representations of Palindromic, Prime and Number Patterns
Representations of Palindromic, Prime and Number Patterns Inder J. Taneja 1 Abstract This work brings representations of palindromic and number patterns in terms of single letter a. Some examples of prime
Mathematica Primer.nb 1
Mathematica Primer.nb (* Mathematica is a powerful mathematics software pacage that can perform numerical calculations and SYMBOIC manipulations. To enter the program from either a Mac or Windows environment,
CSI 32. Lecture 15. Chapter 11 Recursion Functional Recursion 11.4 Binary Search
Lecture 15 Chapter 11 Recursion 11.3 Functional Recursion 11.4 Binary Search 11.3 Functional Recursion Functional recursion is a method of defining functions in which the function being defined is applied
A Simple SAS/AF Program To Manage SAS/CONNECT Sessions David D. Chapman, U.S. Bureau of the Census
Paper 100 A Simple SAS/AF Program To Manage SAS/CONNECT Sessions David D. Chapman, U.S. Bureau of the Census ABSTRACT The Census Bureau is a large organization with a varied and changing computing environment
3GPP TS V8.1.0 ( )
Technical Specification 3rd Generation Partnership Project; Digital cellular telecommunications system (Phase 2+); Security related network functions (Release 1999) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS
Solving Schrödinger equation numerically
eigenvalues.nb Solving Schödinge equation numeically Basic idea on woking out the enegy eigenvalues numeically is vey simple. Just solve the Schödinge equation with a guessed enegy, and it always makes
EZChrom Elite Compact. What s New in EZChrom Elite Compact Service Pack 2
EZChrom Elite Compact What s New in EZChrom Elite Compact 3.3.2 Service Pack 2 Notices Agilent Technologies, Inc. 2010 No part of this manual may be reproduced in any form or by any means (including electronic
Operating Manual. High Performance Liquid Chromatograph. Scientific Equipment Center, Prince Of Songkla University
Operating Manual High Performance Liquid Chromatograph Agilent 1100 ; VWD, DAD, FLD and RID Scientific Equipment Center, Prince Of Songkla University Operating Manual High Performance Liquid Chromatograph
A possible way for handling a set (quasi group) of objects according to their properties
A possible way for handling a set (quasi group) of objects according to their properties Playing with object properties Working with GeoGebra (Mac OS X 10.6.8, GeoGebra: 4.4.23) I've faced with a problem
Limits, Continuity, and Asymptotes
LimitsContinuity.nb 1 Limits, Continuity, and Asymptotes Limits Limit evaluation is a basic calculus tool that can be used in many different situations. We will develop a combined numerical, graphical,
Warning 101 Invalid heater power for front detector, inlet, and aux 1 Warning 102 Invalid heater power for back detector, inlet, and aux 2
A Warning message alerts the operator that a problem exists, but that the problem will not prevent the instrument from executing the run. The 6890 GC emits one beep and a Warning message appears on the
FP0 Hardware Manual Matsushita Electric Works, Ltd. PROGRAMMABLE CONTROLLER FP0. Hardware Manual. is a global brand name of Matsushita Electric Works.
FP0 Hardware Manual Matsushita Electric Works, Ltd. ACGM0084END V3.3 2/2000 PROGRAMMABLE CONTROLLER FP0 Hardware Manual is a global brand name of Matsushita Electric Works. BEFORE BEGINNING This manual
NFC Service Roaming. NFC Services and Innovation Group NTT DOCOMO, INC. June, 2013
NFC Service Roaming NFC Services and Innovation Group NTT DOCOMO, INC. June, 2013 Global NFC Trend Mobile NFC Commercial Deployments Worldwide Global Growth of Mobile NFC Markets Enabled by Standardization
Mobile POS Thermal printer
PK109 Mobile POS Thermal printer MEGADATA INDUSTRIAL, Inc. 1F, NO.10, Lane 58, Ta Chuan Street, TAICHUNG, TAIWAN R.O.C. TEL: +886-4-2376-6881 FAX: +886-4-2371-7974 www.posjet.com.tw megadata@ms21.hinet.net
USER GUIDE. to the CP130. Thermal Printer
USER GUIDE to the CP130 Thermal Printer Revision: 1.0 Filename: CP130 Users Guide v1 0.doc Date: 29 March 2011 1 TABLE OF CONTENTS 1 Table of Contents... 2 2 Introduction... 3 2.1 Notes on Printer Firmware
Ladder logic (LAD) representation Statement list (STL) representation Available in these CPUs
1 he following conventions are used in this chapter to illustrate the equivalent ladder logic and statement list instructions and the CPUs in which the instructions are available: = n n adder logic ()
CPM Series. Control Port Manager. User's Guide. Models CPM-1600 and CPM-800
WTI Part No. 12348 Rev. B CPM Series Control Port Manager Models CPM-1600 and CPM-800 User's Guide 5 Sterling Irvine California 92618 (949) 586-9950 Toll Free: 1-800-854-7226 Fax: (949) 583-9514 http://www.wti.com
Midterm Project: L-systems in Practice and Theory
Midterm Project: L-systems in Practice and Theory Joey Gonzales-Dones March 28, 2016 1 Introduction Lindenmayer systems, or L-systems, are systems for algorithmically rewriting a string of characters.
Chromatography Software Training Materials. Contents
Chromatography Software Training Materials This document contains information on how to build a method, start the instrument to acquire data, and then process the data using the Galaxie Program. You will
Quad Port RS232 & Lynx 8 Port RS232
Quad Port RS232 & Lynx 8 Port RS232 4.6 EDITION JANUARY 1998 Guarantee. FULL 36 MONTHS GUARANTEE. We guarantee your Serial Port Card for a full 36 months from purchase, parts and labour, provided it has
The Mathematica GuideBook for Symbolics
Sample Section of The Mathematica GuideBook for Symbolics This document was downloaded from http://www.mathematicaguidebooks.org. It contains extracted material from the notebooks accompanying The Mathematica
ID8400 Stamper Communications for Firmware Version 7
ID8400 Stamper Communications for Firmware Version 7 Introduction This document will describe the Extended Protocol Communications as implemented with the ITM8400 marking system software. Extended Protocol
Clarity. Clarity Demo. Code/Rev.: M003/60A Date: Fax: Petrzilkova 2583/ Prague 5
Clarity Clarity Demo Clarity ENG Code/Rev.: M003/60A Date: 21.4.2015 Phone: +420 251 013 400 DataApex Ltd. Fax: +420 251 013 401 Petrzilkova 2583/13 clarity@dataapex.com 158 00 Prague 5 www.dataapex.com
Financial Data Store (FDS) Reports: Run-Control Parameters
Financial Data Store (FDS) Reports: Run-Control Parameters What are Run-Control Parameters?... 1 Run-Control Parameter Formats... 1 Understanding Edit Masks... 3 What happens if I enter an invalid parameter
RAVASMARTSOLUTIONS - TECH TIPS
RAVASMARTSOLUTIONS - TECH TIPS Purpose CS5 - Flash - Build a Banner Animation This Tech Tip will illustrate how to build a basic banner animation using Flash. Please build your Flash Image library before
Quick Guide to the Star Bar
Saturn View Saturn Writer Quick Guide to the Star Bar Last active Chromatogram in SaturnView Last active method in the Method Editor Click with the right mouse button on the Star Bar to get this menu Sample,
Agilent 1120 Compact LC Firmware
Agilent 1120 Compact LC Firmware Firmware Bulletin for Revisions B.06.2x G4286A, G4287A, G4288A, 4289A and G4290A A Notices Agilent Technologies, Inc. 2008, 2009 No part of this manual may be reproduced
TraceFinder Analysis Quick Reference Guide
TraceFinder Analysis Quick Reference Guide This quick reference guide describes the Analysis mode tasks assigned to the Technician role in the Thermo TraceFinder 3.0 analytical software. For detailed descriptions
A Table Production System That Meets the Challenges of Tomorrow Using SAS/AF Software and the Report Procedure
Paper 225 A Table Production System That Meets the Challenges of Tomorrow Using SAS/AF Software and the Report Procedure By David Trenery, Hoechst Marion Roussel, Denham, UK Abstract This paper describes
SequencePro Data Analysis Application. User Guide
SequencePro Data Analysis Application User Guide SequencePro Data Analysis Application User Guide DRAFT October 31, 2001 12:52 pm, Title_page.fm Copyright 2001, Applied Biosystems. All rights reserved.
3G TS V3.0.0 ( )
Technical Specification 3rd Generation Partnership Project; Technical Specification Group Core Network; Handover procedures (3G TS 23.009 version 3.0.0) The present document has been developed within the
DEFINING THE VARIABLES... a i = allocation to male function by the ith hermaphrodite in the population.
Local Mate Competition (LMC). Here we are interested in the question: how does the number of mates affect the proportion of resources that should be allocated by a hermaphrodite to male and females function
(Catalog Numbers 2711-KA1, KC1, TA1, TC1, TA4, TC4) User Manual
(Catalog Numbers 2711-KA1, KC1, TA1, TC1, TA4, TC4) User Manual Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application,
Getting Started. Environmental Analysis Software
Getting Started Environmental Analysis Software Environmental Software Overview The Environmental software is a data acquisition and data analysis package designed to assist you in complying with United
GE Fanuc Automation. Plug & Play PCCoprocessor for Series PLC. User s Manual. Programmable Control Products
GE Fanuc Automation Programmable Control Products Plug & Play PCCoprocessor for Series 90-70 PLC User s Manual August 1995 Warnings, Cautions, and Notes as Used in this Publication GFL 002 Warning Warning
WTI Part No Rev. B CPM Control Port Manager. Preliminary Draft March User's Guide
WTI Part No. 12576 Rev. B CPM-6400 Control Port Manager Preliminary Draft March 1996 User's Guide 5Sterling Irvine California 92618 (949) 586-9950 Toll Free: 1-800-854-7226 Fax: (949) 583-9514 http://www.wti.com
Model FP-6500 Spectrofluorometer Instruction Manual. FP-6500 for Windows
Model FP-6500 Spectrofluorometer Instruction Manual FP-6500 for Windows P/N: 0302-9999 April 2000 Contents Safety Considerations...i Regulatory Statements... iii Preface... iv Installation Conditions...v
Looking for a simple and intuitive solution that allows you to access and manage servers across your entire network?
Overview Looking for a simple and intuitive solution that allows you to access and manage servers across your entire network? allow you to view and manage up to 256 rackmount servers across your data center
VeriColor. Solo Identification System. Command Users Manual Document ver Rev. 7/20/05
VeriColor Solo Identification System Command Users Manual Document ver. 1.13 Rev. 7/20/05 i ii PROPRIETARY NOTICE The information contained in this manual is derived from patent and proprietary data from
Expanding Possibilities. DesignJet 1050C/1055CM
Expanding Possibilities HP DesignJet 1050C/1055CM Hewlett-Packard Company Barcelona Division Avda. Graells, 501 08190 Sant Cugat del Vallès Barcelona, Spain HP DESIGNJET 1050 C C B M Y C6074274a 1 C6074259
HEWLETT-PACKARD HP 82160A OWNER'S MANUAL
HEWLETT-PACKARD HP 82160A OWNER'S MANUAL This page is blank in original manual. (Second cover page) Disclaimer This document is rebuilt from scanned JPEG pages of the HP original manual (freely available
HP 48 I/O Technical Interfacing Guide
HP 48 I/O Technical Interfacing Guide HP 48 I/0 Technical Interfacing Guide CONTENTS INTRODUCTION... 3 WIRED SERIAL I/O HARDWARE... 3 CABLE WIRING... 3 SERIAL FORMAT... 5 Example: an 'H' (48 hex)... 5
DEPT on the U400. 2A. Enter the Macro In the experiment that contains the 13 C spectrum, enter: macro to set up a DEPT experiment in exp2
UVU444 DEPT on the U400 FL-26JUL94CD PRELIMINARY INFORMATION 1) The DEPT (Distortionless Enhancement by Polarization Transfer) experiment is frequently used to identify the types of carbons (i.e., C, CH,
Operating Manual. v1.5
Operating Manual v1.5 Table of content Introduction..........................................3 Proprietary NMEA commands...........................4 $PNOVA00: Information message...4 $PNOVA01: Baud rate
Boot ROM Configuration Mode Users Manual
Boot ROM Configuration Mode Users Manual HP 9000 Products rli~ HEWLETT..:~ PACKARD HP Part No. 98574 90600 Printed in USA January, 1990 E0190 Copyright 1983, 1984,1985, 1986, 1987, 1988, 1989, 1990 Hewlett-Packard
Annex A to the DVD-R Disc and DVD-RW Disc Patent License Agreement Essential Sony Patents relevant to DVD-RW Disc
Annex A to the DVD-R Disc and DVD-RW Disc Patent License Agreement Essential Sony Patents relevant to DVD-RW Disc AT-EP S95P0391 1103087.1 09-Feb-01 1126619 8/16 Modulation AT-EP S95P0391 1120568.9 29-Aug-01
Agilent ChemStation Plus
Agilent ChemStation Plus XML Connectivity Guide Agilent Technologies Notices Agilent Technologies, Inc. 2003, 2004-2007 No part of this manual may be reproduced in any form or by any means (including electronic
QuickSpecs. HPE Solid State Drives (SSD) Overview
Overview HPE Solid State Drives (SSDs) deliver exceptional performance and endurance for customers with applications requiring high random read IOPs performance. Leveraging NAND Flash technology, they
Addmaster Corporation
IJ-1000 Ink-Jet Validation Printer Specification Addmaster Corporation Address: 225 East Huntington Drive Monrovia, CA 91016 Web: www.addmaster.com Phone: (626) 358-2395 FAX: (626) 358-2784 Document: ij1w.doc
[DP19] DN-500CD. Serial Command Protocol Guide
![[DP19] DN-500CD. Serial Command Protocol Guide](/thumbs/74/70159399.jpg "[DP19] DN-500CD. Serial Command Protocol Guide")
[DP19] Serial Command Protocol Guide Ver. 1.2 January 16, 2017 inmusic Brands, Inc. 1 1 Contents 2 General... 3 2.1 RS-232C Control... 3 3 Specification... 4 3.1 RS-232C Control... 4 4 Communication Protocol...
MLR INSTITUTE OF TECHNOLOGY DUNDIGAL , HYDERABAD
Name Code : 56012 Class Branch MR INSTITUTE OF TECHNOOGY DUNDIGA - 500 043, HYDERABAD EECTRONICS AND COMMUNICATION ENGINEERING ASSIGNMENT QUESTIONS : MICROPROCESSORS AND MICROCONTROERS : III - B. Tech
CLARITY DEMO. Clarity Demo Software. Code/Rev.: M003/70E Date:
CLARITY DEMO Clarity Demo Software ENG Code/Rev.: M003/70E Date: 24.10.2017 Phone: +420 251 013 400 DataApex Ltd. Fax: +420 251 013 401 Petrzilkova 2583/13 clarity@dataapex.com 158 00 Prague 5 www.dataapex.com
Thermo Xcalibur Getting Started (Quantitative Analysis)
Thermo Xcalibur Getting Started (Quantitative Analysis) XCALI-97207 Revision B September 2010 2010 Thermo Fisher Scientific Inc. All rights reserved. Xcalibur, Surveyor, and Accela are registered trademarks
TIME MACHINE Data Formats (Sep jkuo: extracted from the TIME MACHINE user manual)
TIME MACHINE Data Formats (Sep 1. 2014 jkuo: extracted from the TIME MACHINE user manual) RS232 DATA FORMATS The TIME MACHINE transmits data in ASCII format Each word transmitted consists of a start bit,
TraceFinder Analysis Quick Reference Guide
TraceFinder Analysis Quick Reference Guide This quick reference guide describes the Analysis mode tasks assigned to the Technician role in Thermo TraceFinder analytical software. For detailed descriptions
AQS (Air Quality System) General Overview
AQS (Air Quality System) General Overview CARB PQAO Training January 25, 2017 Jennifer Williams EPA Region 9 1 AQS (Air Quality System) Overview What is AQS? Database that contains: Ambient air pollution
Les s on Objectives. Student Files Us ed
Lesson 3 - Potpourri 31 Lesson 3 P otpourri Les s on Topics The Fill Command Wrapping Text View Options Edit Options Other Fill Handle Uses Les s on Objectives At the end of the lesson, you will be able
Instrument Network (INET) or Local Area Network (LAN) Communications Interface Board Installation Guide
Instrument Network (INET) or Local Area Network (LAN) Communications Interface Board Installation Guide Accessory G1553A (INET) Accessory G2335A (LAN) Overview This section reviews the procedure for installing
MET/BASE Version 6.0 July What s New in V6.0? 32-Bit Software. Measurement Uncertainty Compliance. New Drivers
MET/BASE Version 6.0 July 1999 This file contains information about the Version 6 release of MET/BASE and contains the following sections: What s New in V6.0? What s Changed? Late additions to the manual
For additional information, see these documents on the Breeze 2 software DVD:
R E L E A S E N O T E S Waters Breeze 2 Read these release notes before you install and operate Breeze 2. They contain information necessary to ensure successful liquid chromatography results, including:
Allen-Bradley. Installation Manual. 160 SSC Variable Speed Controller (Series B) kw (1/2 3 HP) FRN 5.xx.
Allen-Bradley 160 SSC Variable Speed Controller (Series B) Installation Manual 0.37 2.2 kw (1/2 3 HP) FRN 5.xx Table of Contents Index This manual is intended to guide qualified personnel in the installation
THERMAL PRINTER SPEC BAS Basic Features. 1.) Type : PANEL Mounting or DESK top type. 2.) Printing Type : THERMAL PRINT
THERMAL PRINTER SPEC BAS - 6026 1. Basic Features 1.) Type : PANEL Mounting or DESK top type 2.) Printing Type : THERMAL PRINT 3.) Printing Speed : 25mm / SEC 4.) Printing Column : 24 COLUMNS 5.) FONT
BW 2050 Manual. Weltech Interna onal Limited INTRODUCTION
INTRODUCTION Weltech Interna onal Limited The BW 2050 has been designed to give the operator complete flexibility for manual live bird weighing. The BW 2050 is ba ery operated and will weigh for up to
Agilent ChemStation Plus
Agilent ChemStation Plus XML and LIMS Interface Guide Agilent Technologies Notices Agilent Technologies, Inc. 2003, 2004 No part of this manual may be reproduced in any form or by any means (including
NOTE: ESCAPE is not always being checked for when the Monitor is performing a selected function,
Last Updated: October 21, 2018 VIP2K Monitor Program Ver. 1.1 NOTE: RCA Basic 3 by Ron Cenker Copyright 1981 NOTE: The VIP2K Membership Card Kit by Lee Hart, Copyright 2018 NOTE: VIP2K Monitor Program
Looking for a simple and intuitive solution that allows you to access and manage servers across your entire network?
Overview Looking for a simple and intuitive solution that allows you to access and manage servers across your entire network? allow you to view and manage up to 256 rackmount servers across your data center
Errata. Title & Document Type: HP 4396A Network/Spectrum Analyzer Operation Manual
Errata Title & Document Type: HP 4396A Network/Spectrum Analyzer Operation Manual Manual Part Number: 04396-90106 Revision Date: July 1999 HP References in this Manual This manual may contain references
ControlMaster CM15, CM30 and CM50 Universal process indicator and controllers Customizing the operator page displays
Technical Description TD/RandC/001 EN ControlMaster CM15, CM30 and CM50 Universal process indicator and controllers Customizing the operator page displays Introduction Certain ControlMasters can be supplied
The patch (Maxum Workstation Patch for Windows 7 Operating System) will load operating system libraries that Microsoft did not include with Windows
1 August 20, 2013 Maxum Workstation 5.00.10 Update Release Notes Requirements Maxum System Manager will operate best on computers equipped with a Pentium-166 or faster CPU, using at least 64 MB RAM. For
=0 Read/Write IER Interrupt Enable Register =1 Read/Write - Divisor Latch High Byte + 2
EEE 410 Microprocessors I Spring 04/05 Lecture Notes # 20 Outline of the Lecture Interfacing the Serial Port Serial Port registers Transmitting Serial Data Receiving Serial Data INTERFACING THE SERIAL
ESA-Series Spectrum Analyzers EMC Analyzers NFA Series Noise Figure Analyzers. Security Features
ESA-Series Spectrum Analyzers EMC Analyzers NFA Series Noise Figure Analyzers Security Features Part Number: E4401-90513 Supersedes: E4401-90494 Printed in USA October 2018 Copyright 2005-2018 Keysight
12. A(n) is the number of times an item or number occurs in a data set.
Chapter 15 Vocabulary Practice Match each definition to its corresponding term. a. data b. statistical question c. population d. sample e. data analysis f. parameter g. statistic h. survey i. experiment
Agilent ChemStation. Understanding Your ChemStation
Agilent ChemStation Understanding Your ChemStation A Notices Agilent Technologies, Inc. 2004 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval
V9.12 Highlights SBC Solutions Inc. June 2015
All Programs That Calculate Sell Price New Feature Discount Adjustment Code to Calculate Price Based on Gross Profit % In all price files that offer the option for a discount code, 1.e.. 1 =the actual
BV4505. IASI-Keypad Controller. Product specification. January 2009 V0.a. ByVac Page 1 of 13
Product specification January 2009 V0.a ByVac Page 1 of 13 Contents 1. Introduction...3 2. Features...3 3. Electrical Specification...3 3.1. Keypad Interface...3 4. Key Values Returned...3 5. Factory Reset...3
Advanced Printing Systems CP290HRS CP324HRS CP424HRS
Advanced Printing Systems CP290HRS CP290HRS CP324HRS CP424HRS CP324HRS CP424HRS Technical reference - Rev. C 1 1. TABLE OF CONTENTS 1. Table of contents... 2 2. Revision history... 3 3. General features...
User Reference Manual
400 East Pratt Street Baltimore, Maryland 21202-3116 (410) 539-3737 AIS+ EE Advanced Image System+ Enterprise Edition Version 1.0 Manual Table of Contents COPYRIGHT... 3 TRADEMARKS... 3 PRODUCT ABBREVIATIONS...
Guidelines for Setting Auto-Peak Width in ApexTrack Processing Methods and its Effect on USP Resolution and USP Plate Count
TECN10008147 New Doc. No. Rev. 01 Page 1 of 6 Guidelines for Setting Auto-Peak Width in ApexTrack Processing Methods and its Effect on USP Resolution and USP Plate Count The information in this article
Performing Internal Standard Calibration using PeakSimple version 3.51
For this example, we will create a 5 point calibration curve for Glycerin using Butanetriol as the Internal Standard. Load the level 1 chromatogram into channel 1. ( File/Open ) Identify the Butanetriol
1.1 Errors and Event list
1.1 Errors and Event list 1.1.1 State machine errors Error code Display description Full description 0x0100 EVENT OVERFLOW Too many events were entered into state machine configuration 0x0101 STATE OVERFLOW
A Guide to Understanding GEM - SECS - HSMS
A Guide to Understanding GEM - SECS - HSMS March 24, 2004 Version 1.1 Table of contents Introduction... 3 Overview... 3 SECS... 3 SECS-II Message Protocol... 4 Streams and Functions... 4 Message Layout...
ACADEMIC YEAR PLANNING - F.Y.J.C. ( ) F.Y.J.C. COMPUTER SCIENCE (Theory)
ACADEMIC YEAR PLANNING - F.Y.J.C. (2015-16) F.Y.J.C. COMPUTER SCIENCE (Theory) JULY Number Systems & Binary Arithmetic : Binary number, decimal, octal, hexadecimal numbers, BCD,conversion from one number
EZ IQ. Chromatography Software PN P1A
O P E R A T I N G M A N U A L EZ IQ Chromatography Software Trademarks The trademarks of the products mentioned in this manual are held by the companies that produce them. Windows is a registered trademark
TECHNICAL BULLETIN. 1. Printers for GOT (compatible product) 2. PC cards for GOT "Compact Flash PC card" (compatible product)
[Issue No.] T10-0028E [Page] 1/6 Thank you for your continued support of Mitsubishi Graphic Operation Terminal GOT900 series. The peripheral devices listed in this bulletin have been concluded by Mitsubishi
LONG-RANGE HANDHELD TRANSMITTER P/N: CMD-HHLR-xxx
Page 1 of 16 FCC PART 15, SUBPART B and C TEST REPORT for LONG-RANGE HANDHELD TRANSMITTER Prepared for LINX TECHNOLOGIES 575 S.E. ASHLEY PLACE GRANTS PASS, OREGON 97526 Prepared by: KYLE FUJIMOTO Approved
HP 8714B Calibration
Wireless Circuits and Systems Laboratory Procedure #7 Calibrating the HP 8714 Network Analyzer This procedure describes the different types of calibrations that are available with the HP 8714 vector network
Océ User Manual
Océ 9300 User Manual Océ-Technologies B.V. This manual contains a description of the Océ 9300 system and a detailed explanation of the plot functions. The introduction (chapter 1), gives a general description
Understanding Complete Compare Differences After Converting Your Models
Introduction After converting your v. 4.1.4 diagrams to Release 7 you may want to validate them using Complete Compare. During the comparison, differences may arise, and those differences are usually the
About this Manual Silicon Investigations Repair Information - Contact Us 920-955-3693 www.siliconinvestigations.com We ve added this manual to the Agilent website in an effort to help you support your
D8000 SERIES QUICK START GUIDE
D8000 SERIES QUICK START GUIDE Version 1.0 Overview The D8000 series modules require a DC Voltage power supply, a USB cable and an unused computer USB port for proper operation. Connecting the D8000 series
-DIN & DIN RaPID TEMPERATURE CONTROLLERS. Product Manual (June 1999)
1 -DIN & 1 4 8-DIN RaPID TEMPERATURE CONTROLLERS Product Manual 59131-2 (June 1999) How to use this manual 1 4 -DIN & 1 8 -DIN RaPID TEMPERATURE CONTROLLERS PRODUCT MANUAL VOLUME I OPERATING INSTRUCTIONS
1510A. MTI Instruments, Inc. 325 Washington Avenue Extension, Albany, New York USA Phone: (518) FAX: (518)
Revision 3.1 August 7, 2014 1510A Precision Signal Source Note: Performing a user calibration with the software package will result in an accuracy of 2% at best. A factory cal is required to achieve the
CHAPTER 1. Introduction Introduction 3
Technical & User Manual Weight Indicator: SMIT-3015 Manufactured By: Samyak Instrumentation Pvt.Ltd. F-4, Memnagar Complex, Opp.Petrol Pump, Memnagar Village, Ahmedabad, India-380052. Phone: +91-79-27495500/5600,
Introduction OR CARDS. INPUT DATA step OUTPUT DATA 8-1
Introduction Thus far, all the DATA step programs we have seen have involved reading and writing only SAS data sets. In this chapter we will present techniques to read and write external or "raw" files
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 04 ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK : Microprocessors and Microcontrollers :
Proposal for Storage and Access of Data on Media Auxiliary Memory
Proposal for Storage and Access of Data on Media Auxiliary Memory Ian Crighton Hewlett-Packard Revision History Author: Ian Crighton Phone: +44 117 9228339 Location: R&D, Hewlett-Packard Ltd, Bristol,
Peak Load & Displacement Indicator PCB for universal Testing Machines Block Schematic Diagram for Peak Load & Displacement Indicator
Peak Load & Displacement Indicator PCB for universal Testing Machines Block Schematic Diagram for Peak Load & Displacement Indicator www.isysindia.com Calibration of Main Load Vs Displacement Board To