AEC. User Manual. Utilities

Transcription

1 AEC EN User Manual Utilities

2 AEC User Manual Trademarks Trademarks Access Easy Controller is a trademark of Bosch Security Systems Microsoft, Windows 95, 98, ME, 2000, XP, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Other product and company names mentioned herein may be the trademarks of their respective owner Notices All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Bosch Security Systems This document is provided pursuant to a license agreement containing restrictions on their use The manual contains valuable trade secrets and proprietary information of Bosch Security Systems and is protected by international copyright law It may not be copied or distributed to third parties, or used in any manner not provided for in the said license agreement All software is provided "as is" The sole obligation of Bosch Security Systems shall be to make available all published modifications that correct program problems are published within one (1) year from the date of shipment The software is intended for use only with the hardware specified in this manual and in the absence of other software Concurrent use with other software or with hardware not specified may cause the program to function improperly or not at all Bosch Security Systems may not provide support for systems operating under such conditions All efforts were made to ensure the accuracy of the contents of this manual The above notwithstanding, Bosch Security Systems assumes no responsibility for any errors in this manual or their consequences The information on this document is subject to change without notice End-User License Agreement for Access Easy Utilities Software Bosch Security Systems Software Products Software: Access Easy Utilities Software Bosch Security Systems Hardware Products Access Easy Utilities and all input/output modules This End User License Agreement (EULA) is a legal agreement between you (individual or a single entity) and Bosch Security Systems for the Bosch Security Systems Software Product that you acquired, and any of the Hardware Products previously identified The Software Product includes computer software, associated media, printed materials, and online or electronic documentation By installing, copying, or otherwise using the Software Product you agree to be bound by the terms of this EULA If you do not agree to the terms of this EULA, Bosch Security Systems or its resellers are unwilling to license the Software Product to you In such event, you may not use or copy the Software Product, and you should promptly contact Bosch Security Systems or its distributors for instructions on return of the unused product for a refund Software Product License The Software Product is protected by copyright laws and international copyright treaties, as well as intellectual property laws and treaties The Software Product is licensed, not sold Grant of License The Software Product refers to the Access Easy Utilities Software that runs on the Access Easy Utilities that enables a computer or workstation running a Web Browser Software (Third-Party Software) to access or utilize the services provided by the Access Easy Utilities Access control This EULA grants to you the following rights to the Software Product: Use of the Server Software: You may use one copy of the Server Software running on one Server, which may be connected at any point in time an unlimited number of workstations or computers operating on one or more networks You must acquire a separate Client Application Software License to access or otherwise utilize the services of the Server by using the Third-Party Software 2 Bosch Security Systems 5/06 F01U027404B

3 Other Rights and Limitations Client Access Licenses: This EULA grants you the number of Client Access Licenses for the Software Product indicated at the top of this EULA Each license permits one additional computer or workstation the right to access or utilize the services of the Server The services of the Server are considered to have accessed or utilized when there is a direct or indirect connection between a computer or workstation and Server Restriction: Restriction against copying or modifying the Software Product The Software Product is copyrighted by Bosch Security Systems or third parties Except as expressly permitted in this agreement, you may not copy or otherwise reproduce the Software Product In no event does the limited copying or reproduction permitted under this agreement include the right to de-compile, reverse engineering, disassemble, modify or electronically transfer the Software Product, or to translate the Software Product into another computer language Separation of Components: The Software Product is licensed as a single product Its component parts may not be separated for use on more than one Server Rental: You may not rent or lease the Software Product Termination: Without prejudice to any other rights, Bosch Security Systems may terminate this EULA if you fail to comply with the terms and conditions of this EULA In such event, you must destroy all copies of the Software Product and all of its component parts Copyright All title and copyrights in and to the Software Product (including but not limited to any images, photographs, animations, video, audio, music, text, and applets incorporated into the Software Product), the accompanying printed materials, and any copies of the Software Product, are owned by Bosch Security Systems or its suppliers The Software Product is protected by the copyright laws and international treaty provisions You may not copy printed materials accompanying the Software Product AEC User Manual Notices Limited Warranty Bosch Security Systems warrants that (a) Access Easy Utilities Software and (b) Access Easy Utilities Access Control Panels and all input/output modules manufactured only by Bosch Security Systems will perform adequately according to the accompanying User s Manual; and will be free from defects in materials and workmanship under its intended normal use and service for a period of one (1) year from date of purchase Customer Remedies Bosch Security Systems s entire liability and your exclusive remedy shall be, at Bosch Security Systems s option, either (a) return of the price paid or (b) repair or replacement of the hardware or software that does not meet Bosch Security Systems s limited warranty and which is returned to Bosch Security Systems with a copy of your purchase receipt This limited warranty becomes void if failure of the hardware or software has resulted from abuse, accident or misapplication No Liability or Consequential Damages Under no circumstances shall Bosch Security Systems or its suppliers be liable for any other damages whatsoever (including, without limitation, damages for business interruption, loss of business profits or other pecuniary loss) arising out of the use of or inability to use this Bosch Security Systems product Bosch Security Systems s total liability under any provision of this agreement shall be limited to the amount actually paid by you for the product Bosch Security Systems 5/06 F01U027404B 3

4 AEC User Manual Contents Contents 10 Before You Begin 5 11 DB Backup 5 12 Report Generator5 13 DB Administrator 5 14 IP Setup5 20 Installation 6 21 Basic Operations Running Setup Installing SQL Desktop Engine (MSDE2000)6 222 Installing the Access Easy Utilities Program 7 30 DB Backup Setting DB Backup Setting User s PC as Remote PC Launching DB Backup13 34 Configuring DB Backup CSV File Format14 35 Running the DB Backup14 40 Report Generator15 41 Launching Report Generator Querying the Database Processing Period User s Profile Location of Readers & I/O Points Transactions to Process19 43 Action Buttons First In/Last Out (FI/LO) Load Button Save Button Reset Button Process Button Quit Button21 50 IP Setup Running IP Setup Viewing TypeMenu Items Start Export About Exit Scanning and Changing Controller IP Address Data Scanning and Changing Specific Controller IP Address Data Scanning and Changing Controller IP Address Data Based on Search Criteria Changing the Password DB Administrator Running DB Administrator Viewing TypeMenu Items File Utilities Menu Help 31 Figures Figure 1: Query Results 16 Tables Table 1: Report Generator Controls 15 Table 2: Print Preview Action Buttons 20 4 Bosch Security Systems 5/06 F01U027404B

5 10 Before You Begin This document contains procedures for the following software setup: Access Easy Utilities Installation DB Backup Report Generator DB Administrator IP Setup 11 DB Backup The DB Backup downloads the Access Easy Controller (AEC) parameters and activity transactions to the local personal computer (PC) as a backup The DB Backup: Allows you to download parameters and activity transactions at hourly intervals or once daily Allows you to download and convert the file to different formats, such as comma-separated variable (CSV) and includes a format to use with the Report Generator program Gives you the option to carry out the conversion from one of the three pre-assigned remote PCs in the AEC For details, refer to the section on panel setup, remote PC addresses in the AEC Quick User Guide (P/N: F01U027397) 12 Report Generator Use the Report Generator with the DB Backup to generate Access Easy Transaction reports off-line from the AEC You can generate reports based on the processing period and a combination of any or all of the following: User s profile Location of readers and input/output (I/O) points Transactions 13 DB Administrator DB Administrator administers the SQL database of the AEC software and its utilities from the local PC The key features of the DB Administrator are: Export Shrink Import Repair Tables Audit Backup Housekeeping Backup Restore Query Settings 14 IP Setup Use IP Setup to scan and change the Internet protocol (IP) address from the local personal (PC) AEC User Manual 10 Before You Begin Bosch Security Systems 5/06 F01U027404B 5

6 AEC User Manual 20 Installation 20 Installation This section explains how to use the setup program The first part describes how to install the SQL Desktop Engine (MSDE200) program; the second part describes how to install the Access Easy Utilities program Read Section 21 Basic Operation It describes how to move to the previous or next setup screen, and cancel the setup process 21 Basic Operations The Access Easy Utilities program is a series of setup screens that inform you or request information 211 You must proceed through the entire series of setup screens and provide the necessary information as requested to complete the installation process Most setup screens have a used to advance to the next setup screen When or enabled, clicking on it advances you to the next setup screen Generally, is enabled when the current setup screen is informative Otherwise, it is disabled until you provide the required information 212 Click to return to the previous setup screen Use this button when you want to change a setting you performed in the previous setup screen or you want to return to the previous setup screen 213 Use to terminate the installation before completion Clicking opens a confirmation dialog where you must click to quit the Access Easy Master Utilities setup 22 Running Setup 1 Start Windows and place the CD containing the Access Easy Utilities disk in your CD ROM drive 2 Run the Windows Explorer and click on the CD ROM drive The following screen open showing three folders: AEC Utility, IP Setup, SQL Desktop Engine (MSDE2000) 3 Install Access Easy Utilities in the following sequence a SQL Desktop Engine (MSDE 2000) If your PC has SQL installed, ignore SQL Desktop Engine (MSDE2000) installation b AEC Utility 4 Double-click the appropriate folder and look for the Setupexe file 5 Double-click Setupexe and follow the instructions as they appear on screen 221 Installing SQL Desktop Engine (MSDE2000) 1 Close any open applications, including anti-virus programs 2 From the SQL Desktop Engine (MSDE 2000) directory, double-click SQL Desktop Engine (MSDE) to view the contents 3 Double-click Setupexe to open the MSDE2000 SetUp screen 4 Click to open the Microsoft SQL Server Desktop Engine status message When the SQL Server Desktop Engine (MSDE2000) is configured, the setup program ends There is no indication the installation is complete 5 Restart the PC to complete the SQL Server Database installation 6 Bosch Security Systems 5/06 F01U027404B

7 222 Installing the Access Easy Utilities Program You can select from three utilities software programs: DB Backup Report Generator DB Administrator 1 Close all open applications, including anti-virus programs 2 From the AEC Utility directory, double-click Setupexe to open the Welcome to the AEC Utility Setup program screen AEC User Manual 20 The User Information screen opens Installation 5 Type the user name and company using the Access Easy Utilities software Then click to open the Choose Destination Location screen 3 Click to open the Software License Agreement screen 6 Click to open the Choose Data Storage Option screen 4 Read the agreement Then click to accept the License Agreement or to exit the setup Bosch Security Systems 5/06 F01U027404B 7

8 AEC User Manual 20 Installation 7 Select CSV Only or CSV and SQL Database The CSV Only option only installs the DB Backup utilities The CSV and SQL Database installs the DB Backup, Report Generator, and DB Administrator 8 If you select CSV and SQL Database, go to Step 18 on page 9 9 Selecting CSV Only opens the Start Copying Files screen After the Access Easy Utilities software is installed, the Borland Database Engine (BDE) setup program begins 11 Click to start the BDE setup and open the User Information screen 12 Type your name and the company using the software Then click to open the Choose Destination Location screen The setup program gathered information to start installation The information provided in the previous screen is summarized on this screen 10 To change an entry or selection, click to return to the appropriate screen, or click to open the Welcome to the BDE Setup program screen 13 Click 8 Bosch Security Systems 5/06 F01U027404B

9 14 To change the default destination directory, click to open the Select Program Folder screen AEC User Manual 20 Installation 17 Click Finish to complete the installation and open the Choose Data Storage Option screen CSV and SQL Database Data Storage Option 15 Change the preferred folder and click to open the Start Copying Files screen showing your current settings 18 At the Choose Data Storage screen, select CSV SQL Database and click to open the Setup Type screen 16 Click to view the Setup Complete screen 19 Select the components you want to install and click You can install the AEC Utility, AEC SQL Database, or both the AEC Utility and AEC SQL Database 20 Follow Steps 22 through 24 on page 10 to install the AEC Utility Follow Steps 25 through 25 on pages 10and 11 to install both the AEC Utility and AEC SQL Database For easier tracking and housekeeping, install all the utilities software in the same PC Bosch Security Systems 5/06 F01U027404B 9

10 AEC User Manual 20 Installation AEC Utility (DB Backup and Report Generator) 21 Select AEC Utility and click to open the Enter Information screen 22 Type the SQL Server computer name and click to open the Start Copying Files screen 24 When the Access Easy Utilities software is installed, the BDE setup program starts Follow Steps 12 through 16 on pages 8 and 9 to complete installation AEC Utility (DB Backup and Report Generator) and AEC SQL Database (DB Administrator) The setup program gathered information to begin installation The information you provided in the previous screen is summarized on this screen 23 Change an entry or selection by clicking to return to the appropriate screen or clicking to open the Welcome to the BDE Setup program screen 25 At the Select SQL Server Password screen, type the SQL Server password provided by your SQL system administrator, then click to open the Select Language screen 10 Bosch Security Systems 5/06 F01U027404B

11 AEC User Manual 20 Installation When you install the SQL Desktop Engine (MSDE2000) from the Utilities CD, the password window is blank 28 After the software is installed, the BDE setup program starts Follow Steps 12 through 16 on pages 8 and 9 to complete installation 26 Select the desired language and click to open the Start Copying Files screen The setup program gathered information to start installation The information you provided in the previous screen is summarized on this screen 27 To change an entry or selection, click to return to the appropriate screen or click to open the Welcome to the BDE Setup program screen Bosch Security Systems 5/06 F01U027404B 11

12 AEC User Manual 30 DB Backup 30 DB Backup 31 Setting DB Backup Before launching the DB Backup, consider the following important points: You must have file transfer protocol (FTP) access to the AEC If you do not have FTP access, the AEC super user can grant you access rights The DB Backup allows you to download the AEC parameters and activity transactions to a PC as a backup The DB Backup uses FTP to transfer information from the AEC to the PC Your PC has FTP access to the AEC remote PC You can specify a maximum of three PCs To grant FTP access rights: 1 Log in as the AEC super user ( user1 is the default super user) 2 From Panel Admin, select Users to view the following screen showing all users The user name for whom access is to be granted is selected This opens the following screen showing all rights that can be granted Note that File Transfer (FTP) under the heading Remote PC Access is checked 32 Setting User s PC as Remote PC The left side of the AEC screen contains configurable options 1 Click Panel Setup to open the following screen 12 Bosch Security Systems 5/06 F01U027404B

13 2 Set up a PC as a remote PC by specifying the PC s IP address 3 Once the remote PCs are set up, back up the database 4 Click on the Database Backup hyperlink to open the Backup database screen AEC User Manual 30 5 At the submenu item, To Flash Memory, click DB Backup Perform the Flash Memory backup before activating the DB Backup for the first time 33 Launching DB Backup 1 Select Start Programs AEC Utility DB Backup to open the Login dialog 4 The program resides in the Windows system tray The red rectangular icon shows the DB Backup program is running 34 Configuring DB Backup You must configure the DB Backup program before it can operate The parameter user configures using the Auto-Transaction time and the export format 1 Right-click the DB Backup icon to open the following popup menu Type the same user name and password you had for the AEC FTP access rights, enabling the Login button Ensure the users have FTP access rights to log on to the AEC, and they log on using a PC specified in the Panel Setup Remote PC s Addresses 2 Click Login Type the AEC IP address in Access Easy Controller IP The AEC IP address must be one of a valid operating AEC 2 Select Setup to open the Setup dialog 3 Click 3 Select the At Fixed Interval of radio button if you want the program to retrieve the transactions from the AEC Select Daily at if you want the program to retrieve the transactions only once each day Bosch Security Systems 5/06 F01U027404B 13

14 AEC User Manual 30 DB Backup 4 Click the Export Format tab to configure the format type as shown below 5 If you are using the Report Generator application program, check the Report Database option If you are using a third-party software to read files in the CSV format, check the CSV Format option Click to change the directory other than those defined as the default 6 Click to save the setting and close the dialog 7 When you finish configuring the DB Backup setup parameters, select Synchronize Database from the popup menu Synchronize Database remains current with the latest AEC parameters in user PC 341 CSV File Format When DB Backup creates the CSV format, it assigns the file a name with the format Tyyyymddcsv, where: T = transaction file yyyy = year m = month (in hexadecimal format) dd = date For example, for transactions on 23 March 2000 the filename is T csv For transactions on 20 December 2000, the filename is T2000c20csv If your AEC View Activity web pages contain transactions from different days, the activated DB Backup creates the necessary filenames based on those dates For example, the View Activity web page has transactions on 19, 20, and 21 May 2000 so the filenames T csv, T csv, and T csv are created respectively If you configured DB Backup to carry out the transaction and conversion more than once daily (such as four each hour) it appends the latest transactions to a relevant filename If a connection with the control panel cannot be established, a retry is carried out To configure the number of retries and retry interval: 1 Ensure the DB Backup is run at least one time and closed 2 Click Start and then click Run 3 Type regedit inside the Run box and click OK A window containing registry key names opens showing the HKEY_LOCAL_MACHINE folder 4 Click the + next to the folder to expand that folder and open sub-folders 5 Expand the Software, ADC Technologies, and DB Backup folders 6 On the right pane, are two columns, Name and Data Under Data corresponding to RtryCnt, type a number for the time interval you want to set 7 Under Data corresponding to RtryIntrvl, type a number for the retry interval you want to set 35 Running the DB Backup 1 Select Open to access a dialog Which dialog appears depends on the transaction and conversion interval or time, such as: Referring to the above figure, Next update in 00:14:03 indicates the countdown time when the next transaction and conversion is due This is for transaction carried out at interval 2 Clicking immediately carries out the conversion and updates the transactions file Use the Synchronize Database menu option when changes are made to the AEC parameters This option synchronizes the database changes with those in your PC When using Report Generator, the changed parameters are reflected in the report Selecting Synchronize Database also updates the Mntrptdbf and Carddbf files in the Mntrdsn and Miscdsn folders respectively Database synchronization begins daily at 0030 am Use Exit to close DB Backup if you finished the configuration and do not want the program to carry out the transaction and conversion 14 Bosch Security Systems 5/06 F01U027404B

15 AEC User Manual 40 Report Generator 40 Report Generator 41 Launching Report Generator Click Start and select Programs AEC Utility ReportGenerator to launch the program and open the AEC Report Generator screen Refer to Table 1 for the Report Generator s components and controls Table 1: Report Generator Controls Control Title bar Menu bar Control button Processing Period Location of Readers & I/O Points Delete buttons (3) User s Profile Transactions to Process Definition Identifies the application Includes the Help menu with the About Program dialog containing application and version control information Minimize, maximize, or close the application Allows you to configure a query based on date and time By default, the date is set to the current date every time the program launches The time is set to the range of 00:00 to 23:59 Allows you to configure a query based on reader location and other I/O points Located on three query fields Removes query conditions in the Query Items Window that might have been mistakenly configured These buttons only enable when a configured item is selected Allows you to configure the query based card number, name, department, or other options such as user field and its Information Allows you to configure the query based on transaction events Bosch Security Systems 5/06 F01U027404B 15

16 AEC User Manual 40 Report Generator Table 1: continued Control FI/LO Action buttons Status bar Definition First In/Last Out check box Tracks an employee s entrance and exit for the day Load: Loads the previously saved query conditions saved as a filename with art extension Save: Saves query condition settings as a filename with art extension Reset: Automatically sets all query fields to the default without the user manually undoing them Process: Instructs the program to begin processing based on the query settings Quit: Exits the program and closes the user interface Shows the status during the processing stage 42 Querying the Database The minimum requirement for any query is to specify a date A query in the Report Generator is a combination of the date in the Processing Period field and other query items The three query fields, User s Profile, Location of Readers & I/O Points, and Transaction to Process are interrelated When the Report Generator screen is activated, User s Profile controls the Location of Readers & I/O Points and Transaction to Process Depending on your selection in User s Profile, the related selections in other query fields are enabled For example, when User s Profile is enabled, you can only select Readers in Location of Readers & I/O Points and only Transactions Generated by Readers in Transaction to Process When generating a report, configure the fields in the following order: Step 1: Processing Period Step 2: User s Profile Step 3: Location of Readers & I/O Points Step 4: Transactions to Process 421 Processing Period The listing order of the query result always ranges from the Start Date to the End Date For example, if you set Start Date to the current date and End Date to an earlier date, the resulting list has the current date query result as the first record and the earlier date as the last record The result listing is reversed if you specified otherwise For the Time option, you can query the result to within or out of the time range Alternatively, you can disable this query item so there are no time range restrictions Disabling time results in a query ranging from 00:00 h to 23:59 h Refer to Figure 1 for the two queries with specific start and end times Figure 1: Query Results Start Time: 8:30:00 am (0830 h) End Time: 5:30:00 pm (1730 h) Query Result Start Time: 5:30:00 pm (1730 h) End Time: 8:30:00 am (0830 h) Query Result Query Result Bosch Security Systems 5/06 F01U027404B

17 To configure date: 1 At the Start Date field, click on the arrow button to open the Month menu 2 Use (forward) or (backward) to select the desired month Then click directly on the day to select the date 3 Repeat Steps 1 and 2 to select the End Date To configure time: AEC User Manual 40 Report Generator 1 Click on the Card # radio button to enable Card # and Name Then do one of the following: a At Card #, click on the arrow to view a list of card numbers and cardholder names in the database Then select the required card number or b At Name, click on the arrow to view a list of names and card numbers in the database Then select the required name 2 Repeat Step 1 until you complete your selections Each time you select by name or card number, the selection appears in the Query Item window to the right of Option The following screen shows selected names in the Query Item window 1 By default, the Time option is checked and the Start Time and End Time fields are enabled 2 At the Start Time option s Hour and Min fields, select the desired hour and minute 3 Repeat Step 2 to select the End Time 422 User s Profile This field allows you to configure your query based on the card number and name, card number or name, department, or other options such as the user field and its information To configure by card number and/or name: To remove a name or card number: If you err in your selection, remove the selection from the Query Item window by selecting the desired name or card number and clicking To configure by department: 1 Click Department to enable the related field and disable all other fields 2 Use the arrow to view a list of all departments in the database Then select the department 3 Repeat Step 2 to change the department to query By default, User s Profile is checked and the query fields are enabled Bosch Security Systems 5/06 F01U027404B 17

18 AEC User Manual 40 Report Generator To configure by option: 1 Click Option to enable this field and disable all other fields The Query Item window is replaced by two edit fields, All User Fields and All UserFields Information All UserFields Information is referred to as Description in the AEC application 2 Click the arrow to view a menu of all user fields in the database Then select the desired user field as shown in the following screen To configure by location: By default, Location of Readers & I/O Points is checked The appropriate description appears in the edit field depending on the position of the radio button A list window opens Based on the selection of the first edit field (Location in the example), the second edit field shows a list of all location descriptions 3 For the second edit field, click the arrow to view all related user field descriptions and select a description The following screen shows an example of the listings 1 Click the appropriate option: All, Readers, or Others on which to base your listing 2 Click the-arrow to view a list of related locations and select the desired location The selected location appears in the Query Item window The following screens are two examples of queries The first is based on other I/O points; the second is based on a mixture of readers and other I/O points 423 Location of Readers & I/O Points This field allows you to configure your query based on additional query items by readers or I/O points Note 1: Location of Readers and I/O Points is controlled by the User s Profile You are only allowed to query based on readers if you use this field in combination with the User s Profile Note 2: To query based on All or Input/Output, disable User s Profile To remove query items: If you err in your selection, remove the selection from the Query Item window by selecting the item and clicking 18 Bosch Security Systems 5/06 F01U027404B

19 AEC User Manual 40 Report Generator 424 Transactions to Process This field allows you to configure your query based on additional query items by Transaction events To configure by transaction: By default, Transaction to Process is checked A Query Item window appears To load a query setting: 1 Click to access the Open dialog Transactions to Process shows Transaction events according to what is selected in the Location of Readers & I/O Points Click the arrow to view a list of all related transactions in the database and select the desired transaction The selected transaction appears in the Query Item window The following screen shows a sample configuration 2 Select the desired filename The filename appears in the File name: field 3 Click to proceed or click to abort 433 Save Button After you configure the query, the Report Generator allows you to save the configuration to a filename with the art extension The next time you want to query the database based on these settings, load this filename To save a query setting: 1 Click to open the Save As dialog To remove transactions: If you err in your selection, remove the selection from the Query Item window by selecting the transaction and clicking 43 Action Buttons 431 First In/Last Out (FI/LO) When checked, the FI/LO option allows you to track when employees enter and leave for the day 432 Load Button If you saved query settings, this button allows you to retrieve those setting using their filename Once the filename is loaded, you can modify it to suit other query conditions such as changing the date or adding new query items 2 Highlight the default filename RptQry1 and type your own filename in the File name: field 3 Click to proceed or click to abort Bosch Security Systems 5/06 F01U027404B 19

20 AEC User Manual 40 Report Generator 434 Reset Button This button is similar to the New function in any Windows-based application software It provides a fresh default query setting without manually undoing the previous setting You can also use this button when you err in configuring the query fields and it might take too long to manually undo them as compared to starting anew 435 Process Button After configuring the query settings or loading a previously saved query setting, this button allows you to process the query To process the query: 1 Click 2 Check the Status bar to view the status of the processing 3 When there are transactions that satisfy the query settings, a print preview appears as shown below Refer to Table 2 for the print preview buttons and information Table 2: Print Preview Action Buttons Button Description Button Description Button Description First page button Previous page button Current page vs total pages in the report Next page button Previous page button Print button Export button Zoom list Total records count Zoom factor Close button 20 Bosch Security Systems 5/06 F01U027404B

21 To print the query result: AEC User Manual 40 Report Generator The Number and Date Format dialog opens 1 Click to open the Print dialog 4 Check the Same number formats as in report and/or Same date format as in report check boxes Then click to open the Choose Export File screen The dialog opens with Printer: set to the system default printer 2 At Print Range, select a setting for all pages or specify the range of pages 3 At Copies:, select the number of copies and check or uncheck Collate Copies 4 Click The report is sent to the system default printer 5 If you want to change the default printer, go to Settings Control Panel and double-click the printer icon To save the query results in a different format: 1 Click A series of dialogs prompt you for the type of format you want the results saved in This document shows the dialogs when the result is saved in CSV format 5 At File name:, type a filename for the export file and click To close the preview page: Click when you are finished with the preview page 436 Quit Button When you are done with the application, click to close and exit the program Alternatively, you can click 2 At Format:, select the format you want the results saved in At Destination:, select where you want to save the file Then click to open the Character-Separated Values dialog 3 Type the desired values in Separator: and Quote: Then click Bosch Security Systems 5/06 F01U027404B 21

22 AEC User Manual 50 IP Setup 50 IP Setup 51 Running IP Setup 1 Start Windows and place the CD containing the Access Easy Utilities Disk in your CD ROM drive 2 Run the Windows Explorer and click on the CD ROM drive to view the AEMC Utility, IPSetup, and SQL Desktop Engine (MSDE2000) folders 3 Double-click IP Setup and look for the Setupexe file Alternatively, you can copy the entire IPSetup folder into your PC and launch the IP Setup program 4 Double-click to launch IP Setup 52 Viewing TypeMenu Items Menu Display Area Status Screen 22 Bosch Security Systems 5/06 F01U027404B

23 AEC User Manual 50 IP Setup 521 Start Start allows you to begin scanning the existing controller s IP address that is available within the network 522 Export Export allows you to export the available controller s IP address data to a CSV file format You can also use this option to housekeep and track controller data 1 After scanning and editing the controllers IP address data, select Export on the Main menu to open the Save As screen 53 Scanning and Changing Controller IP Address Data 1 Select Start on either menu to begin scanning The IP Setup begins scanning for controllers within the network and the following message appears The results appear in the display area 2 Check the controller s box (to the left of MAC Address 1) and click IP Address 1 or IP Address 2, Subnet Mask 1 or Subnet Mask 2, Gateway 1 or Gateway 2 to change the data In the following example, IP Address 1 was changed to Click to export the selected data 523 About About shows the current FingerprintIP Setup software version From the Main menu, select About to open the About IP Setup screen and view the current software version 3 Type the password and click The default password is supvisor The results are reflected in the status screen (below) to indicate success or failure 524 Exit Exit logs out of the FingerprintIP Setup software Bosch Security Systems 5/06 F01U027404B 23

24 AEC User Manual 50 IP Setup 54 Scanning and Changing Specific Controller IP Address Data 1 From Send To, select Specific TCU/Network 2 Type the IP address you want to search for in Enter IP/Network Address: This example shows IP address Click The results appear in the following display 4 Follow Steps 2 and 3 in Section 53 Scanning and Changing Controller IP Address Data on page 23 to change the desired data 55 Scanning and Changing Controller IP Address Data Based on Search Criteria Several controllers can be detected within the network Use the search function to narrow the range or look for a specific controller and edit the necessary data 2 Select the desired parameters In this example, IP Address 1 in Fields to Search and Entries containing phase in Search Option are the search parameters 3 Click to open the Search for: dialog 4 At Search for:, type the value you want to search for and click This example has 32 as the value 1 At Search for, click to open the Customer Search dialog The search results are highlighted with a light-blue background and are reflected in the display 5 Follow Steps 2 and 3 in Section 53 Scanning and Changing Controller IP Address Data on page 23 to change the desired data 24 Bosch Security Systems 5/06 F01U027404B

25 56 Changing the Password AEC User Manual 50 IP Setup 1 At the Main menu Start Task field, select Change Password to open the password dialog 2 Complete the Password, New Password, and Confirm Password fields and click You can erase all fields by clicking The results are reflected in the status screen to indicate success or failure Bosch Security Systems 5/06 F01U027404B 25

26 AEC User Manual 60 DB Administrator 60 DB Administrator 61 Running DB Administrator At successful log in to the PC, the program resides in the Windows system tray and shows an icon to indicate it is running The following is a portion of the system tray with the DB Administrator icon DB Administrator icon 1 Right-click in the system tray to open the following popup menu 621 File Use File to set the general administration for the software The File submenu items are: Login: Log in to DB Administrator Logout: Logs out of DB Administrator Change Password: Changes a password Exit: Closes out of DB Administrator 622 Utilities Menu The options in this menu allow the general administration of the SQL database Export This option exports and backs up SQL tables in an adc file extension 1 Click to open the Export dialog 2 Select Login to open the Login dialog 3 Type a user name and password in Use Name and Password fields (The default user name and password are supvisor ) 4 Click 62 Viewing TypeMenu Items Menu Items Utilities Items 2 From Source Database, select the database for the SQL tables 3 At Destination File, click to locate and select the destination for the SQL tables 4 From List of Tables, select the desired tables and click to move your selections to Selected Tables (Click to remove tables from the Selected Tables) 5 When all SQL tables you want to back up are selected, click The message appears when back up is complete 26 Bosch Security Systems 5/06 F01U027404B

27 Import This option allows you to import and restore the backup SQL tables from an adc file extension 1 Click to open the Import dialog AEC User Manual 60 DB Administrator Backup This option backs up the entire database to disk or tape Use Backup to schedule regular backups Click to open the Backup Options menu Backup Now 1 From the Backup Options dialog, select Backup Now to open the Backup Now dialog 2 At Row Delimiter, select Comma or Tab to separate SQL data values in the SQL tables 3 At Source File, click to locate and select the file you want to restore the SQL tables to 4 At Destination Database, select the database for the SQL tables 5 Select the desired SQL tables from the List of Files and click to move the selected tables to the Selected Files Click to remove tables from Selected Files 6 When all SQL tables you want are selected, click The message tables are restored appears when the SQL Importing overwrites all data in the existing table with the backup data This action is irrevocable Audit Backup Use Audit Backup to separate audit data into date wise tables Click to begin the backup This is an internal process; there is no message to indicate a successful Audit Backup 2 From Source Database, select the SQL tables you want backed up 3 From Destination, select the appropriate destination storage device 4 Select an appropriate Media Write option Append adds to the existing SQL tables in the backed up destination file Overwrite rewrites every SQL table in the destination file 5 At Destination Directory, click to locate and select the directory for the backed up the SQL tables 6 Click When the backup is complete, the following message appears Bosch Security Systems 5/06 F01U027404B 27

28 AEC User Manual 60 DB Administrator Schedule Disk Backup/Schedule Tape Backup 1 From the Backup Options dialog, select Schedule Disk Backup to open the Backup Schedule dialog Query Use Query to execute SQL commands such as create or delete SQL tables The following screen shows a SQL command to create a new table in the desired SQL database 2 At Source Database, select the SQL tables you want to back up 3 At Backup Schedule, select the number of days and time for regular back up 4 At Media Write, select the appropriate option Append adds to the existing SQL tables in the back up destination file Overwrite rewrites every SQL table in the destination file 5 At Backup Directory, select the directory you want to back up the SQL table from 6 Click to add in the directory 7 Click to begin the backup schedule Do not perform an SQL query if you are unfamiliar with the SQL database, tables and commands Shrink Shrink reduces the size occupied by the database, if empty or unused space is available 1 From the DB Administrator menu, click to open the Shrink Database dialog 2 At Database, select the SQL table whose size you want to reduce and click When the database shrinking is complete, the following message appears 28 Bosch Security Systems 5/06 F01U027404B

29 Repair Tables Use Repair Tables to increase the performance of SQL tables When a table is heavily fragmented, this option reduces fragmentation and improves read-ahead performance 1 From the DB Administrator menu, click to open the Repair Tables dialog AEC User Manual 60 House Keeping Use House Keeping to delete unwanted tables DB Administrator Before performing this function, ensure you back up the SQL database 1 From the DB Administrator menu, click to open the House Keeping dialog 2 At Database, select the SQL database you want to repair 3 Select the desired SQL tables from the List of Tables and click to move the selected tables to Selected Tables Click to remove the tables from Selected Tables 4 Click 5 The message appears when the SQL tables are repaired 2 At Database, select the desired SQL database 3 Select the desired SQL tables from the List of Tables and click to move the selected SQL tables to Selected Tables Click to remove the SQL tables from the Selected Tables 4 Click Deleting a database is irrevocable Bosch Security Systems 5/06 F01U027404B 29

30 AEC User Manual 60 DB Administrator Restore Use this option to restore the database from previous backup sets 1 From the DB Administrator menu, click to open the Restore dialog Settings Use Settings to configure the scheduling time to shrink databases 1 From the DB Administrator menu, click to open the Settings dialog 2 At Restore as Database, select the SQL database you want to restore 3 At Source Device, select the appropriate device you want the SQL database tables backed up to 4 At Display, select either option to either show all contents of the source directory or only the contents of the database 5 At Source File, click to select the SQL database location The related tables in that location appear in the Source window 6 Select the SQL table you want to restore 7 At Destination Directory, select the desired destination directory you want to restore the database to Original Directory is the initial directory the SQL database resides in Other allows you to define another directory to restore the SQL database in 8 Click When restored, the following message appears 2 At Housekeeping, select the tables and the number of days you want to keep in the database 3 At Shrink Database, select Schedule Shrink Database every and the number of days you want to shrink the database 4 At Database Size Alert, select Enable database size alert, if it reach and the space limit the SQL database can reach before you are alerted 5 Click 30 Bosch Security Systems 5/06 F01U027404B

31 63 Help The Help contents gives you a general description of the Utilities menu About shows the current Fingerprint DB Administrator software version Select About on the Main menu to view the current software version AEC User Manual 60 DB Administrator Bosch Security Systems 5/06 F01U027404B 31

32 Bosch Security Systems 130 Perinton Parkway Fairport, NY Customer Service: (800) Technical Support: (888) Bosch Security Systems F01U027404B