Printer Driver. for Windows 2000/XP. User s Manual

Transcription

1 Printer Driver for Windows 2000/XP User s Manual

2 Regarding this manual This manual explains how to install Windows Printer Driver and how to use it. This Printer Driver can be used with Microsoft Windows 2000 and Windows XP. 1

3 Index 1. INSTALLATION METHOD Install TCP/IP Port Add Printer About Printer Port About reinstall of Printer SETTING ITEM OF PRINTER DRIVER

4 1. Installation Method 1.1. Install TCP/IP Port 1. Insert Installation Disk in CD-ROM driver. 2. Open (the optical drive)\software\printerport\ and run KM4800wTcpMon_xxx.exe. (xxx is the version) 3. Click OK. 4. Click Next. 3

5 5. Click Install. 6. Please wait while the wizard program is installing the components. 4

6 7. Click Finish. TCP/IP Port installation is completed. 5

7 1.2. Add Printer 1. Open Print and Faxes within Control Panel and launch Add Printer to start Add Printer Wizard. 2. Click Next. 6

8 3. Select Local printer. Uncheck Automatically detect and install my Plug and Play printer. Click Next. 4. Select Create a new port. Select KM-4800w TCP/IP Port in the pull-down menu for port types. Click Next. If "KM-4800w TCP/IP Port" exists, select "Use the following port:" and specify the "KM-4800w TCP/IP Port" from the pull-down menu. 7

9 5. Enter the KM-4800w s IP address or host name. Click OK. 6. Click Have Disk. 7. Click Browse. 8

10 8. Specify K48PREN.INF at (the optical drive)\software\printerdriver\en\. Click Open. English: specify \Software\PrinterDriver\EN\ K48PREN.INF French: specify \Software\PrinterDriver\FR\ K48PRFR.INF German: specify \Software\PrinterDriver\DE\ K48PRDE.INF Italian: specify \Software\PrinterDriver\IT\ K48PRIT.INF Spanish: specify \Software\PrinterDriver\ES\ K48PRES.INF 9. Click OK. 9

11 10. Click Next. 11. If KM-4800w Printer Driver is already installed on your system, the following screen appears. Select Replace existing driver and click Next. 10

12 12. Printer name can be changed at your option. Click Next. 13. Select Do not share this printer, and click Next. 11

13 14. Select No, and click Next. 15. Click Finish. 12

14 16. Click Continue Anyway if the following window appears. Installation of printer has been finished. 13

15 1.3. About Printer Port Select the printer you have added by right-click, and select Properties. Select the Ports Tab. Select KM-4800w: Port, and click Configure Port. 14

16 The following information is indicated. You do not have to change any of the above settings in usual case. Change these settings when KM-4800w does not wake up correctly from the Power Save Mode caused by the network settings. MAC Address: MAC Address of output printer Broad Cast Address: An address used to send the data to all PC on the network Magic Boot Port: Port number to send the data Timeout: Timeout when no response comes from the output printer Retry: Number of retry when no response comes from the output printer 15

17 1.4. About reinstall of Printer Open Print and Faxes within Control Panel and select a printer to be deleted. Right-click on it and select Delete. Click Yes. Click OK. Now the system is ready to be reinstalled KM-4800wEN. 16

18 2. Setting item of Printer Driver If the setup conditions of the application is not correct, documents may not be printed properly. Select the printer you have installed by right clicking, and then open Printing Preferences. Each setting item in General Setting Tab is explained on and after the next page. 17

19 <Paper Size> Specify the size of paper used for printing. If Custom Size is selected in the above setting, the following dialog is indicated. A paper size can be specified at your option within the following range. Width: 100 mm to mm Height: 100 mm to mm 18

20 If Fit Page is selected with checking Scaling, the printing image is automatically enlarged or reduced just to fit the paper size selected on Output Paper. If Percent is selected with checking Scaling, the printing image is enlarged or reduced according the value specified on Magnification. Available setting range for Magnification is from 20 to 500%. 19

21 <Direction> Orientation of paper can be selected. The printing image is rotated in a 180 degrees arc revolution against the paper. <Copies> Number of prints can be specified ranging from 1 to 999. Checking Collate enables to print sets with collating. 20

22 Each setting item in Output Setting Tab is explained in below. <Roll> The source of paper can be selected. <Media> The type of printing media can be selected. <Layout> Multiple images can be printed on 1 sheet of printing media. 16 images is the maximum number of images available to print on 1 sheet of printing media. <Resolution> Printing resolution can be specified ranging 300 and 600dpi. <Mirror> A mirror image can be printed when ON. <Negative Image> A negative image can be printed when ON. 21

23 Printer Driver for Windows 2000/XP User s Manual Rev. 1.0 The Copyright Act protects this manual. It is prohibited to copy or duplicate all or a part of this manual without permission. 22