Hi-Target Qcool Quick Start Manual

Transcription

1 Hi-Target Qcool Quick Start Manual Device Device Overview (page 2) Battery Information (page 2) Software Select / Edit coordinate system / datum (page 4) Dictionary (page 5) New build a project (page 5) Import background image (page 6) Record Point / Line / Area (page 7-9) Export data (page 9) 1

2 Device Device Overview When using your device for the first time, you should complete these tasks to set up the device and get to know the basic features Up key 2 Down key 3 Storage Card and USB Port 4 OK key 5 Power and Backlight key Battery information You can use alkaline, MiMH, or lithium batteries. Use NiMH or lithium batteries for the best result. The device operates on two AA batteries. 6 NOTICE Alkaline batteries lose a significant amount of their capacity as temperature decreases. Therefore, use lithium batteries when operating the device in below-freezing conditions 7 6 Rear cover screw 7 Battery 2

3 Software Start Qcool software, main contact interface presents. Before going out for field operation, please follow below procedure step by step. In Qcool software, Field operation procedure is presented as below: Select / Edit coordinate system Open / New build a dictionary New build a project Import background image Collect Point / Line / Area Data download 3

4 1. Select / Edit coordinate system Before field operation, your own coordinate system is needed, by clicking to select / edict coordinate system. You can edit Ellipsoid, Projection, and Central Meridian. When finished, click to confirm. 4

5 2. Open / New build a dictionary Dictionary is used to record attribute. By clicking you can new build dictionary or customize the attribute according to your field operation needs. All the features are described by point, line or area. For example, trees should be recorded as point, roads should be recorded as line, and buildings should be recorded as area. 3. New build a project When coordinate and dictionary are both ready, you can start you project now. Remember to click to confirm. 5

6 4. Import background image Map or background image can be imported into program to get more artistic interface. to enter map interface. to add your map. There are two type of format for map, *.zmp file can be created by Hi-Target Hi-Net Server software. Every signal point on *.zmp map has a coordinate, with this map, Qcool will show where you are and what the area is. 6

7 5. Collect Point / Line / Area Main function of Qcool is to record the objects with coordinates and attributes. Notice: when recording, first record coordinate, then attribute. Collect Point position with coordinate. to enter Collect Point interface. Here you can see your current First click to record attribute. to record coordinate, then click 7

8 When recording coordinate, you can manually click average. Attribute should be written only after coordinate recorded. or automatically After writing attributes, click to confirm. Collect Line position with coordinate. to enter Collect Line interface. Here shows your current At least two points will make a line, which means you should first record at least two points with coordinate, then click to write attribute. Also when recording coordinate, you can manually or automatically operate. After writing attributes, click to confirm. 8

9 Collect Area position with coordinate. to enter Collect Area interface. Here shows your current At least three points will make area, which means you should first record at least three points with coordinate, then click attribute. to write Tips: Save your data by clicking. 6. Data download In order to connect to your PC, Microsoft ActiveSync is need on Windows XP; Windows Mobile Device Center is need on Windows 7 operating system. After software been installed, next step is to install driver. All your data should be stored in NandFlash, Otherwise it will not be stored after you restart the device. When finished field operation, data can be downloaded to PC for post-processing. Hi-Target Hi-Net Server software is the post-processing software which can process field data and export different format data (DXF, SHP, MIF, CSV, txt). 9