E-bot and E-bot ADV Firmware Upgrade Manual for v1.3.0
|
|
- Dwayne Little
- 6 years ago
- Views:
Transcription
1 E-bot and E-bot ADV Firmware Upgrade Manual for v1.3.0 This manual introduces Firmware upgrade and TTS data upgrade. The firmware upgrade is necessary. The TTS data upgrade is not necessary if the version of E-bot is v1.1.0 or later, or if TTS data is already upgraded. Firmware Upgrade pages 1-6 TTS Data Upgrade pages 7-12 ***Your AC adapter must be connected to the E-bot. Do Not power off the E-bot while the upgrade is in progress. Firmware Upgrade A. What you will need Windows PC which has a Wi-Fi connection. B. The steps (i.e. Pages 1 through 6) Step 1: Step 2: Download the files from the web First Wi-Fi upgrade Step 3: Second Wi-Fi upgrade Step 1: Download the Files from the Web Click on the link below: EB100A_Firmware_Upgrade.zip Unzip the files and you will see two folders. (Picture 1) (Picture 1) There will be (2) files located in each Upgrade Folder. (Picture 2 and 3) 1
2 (Picture 2) (Picture 3) Step 2: First Wi-Fi Upgrade Connect PC and E-bot by Wi-Fi connection in order to begin the 1 st Wi-Fi Upgrade. *Refer to pages 22 and 23 of the E-bot ADV user manual, Connecting to a PC via Wi- Fi. **Do not connect the ipad Viewer or Android Viewer to the E-bot via Wi-Fi while upgrade is in process. Execute Wifi_upgrade_client (EB100A).exe file in the 1st Upgrade folder. Then you will see the dialog box. (Picture 4) 2
3 (Picture 4) Click Upload file button. The file transferring will begin. (Picture 5) (Picture 5) When file transferring is finished you will see Uploading file is finished successfully. Click the Exit button. (Picture 6) 3
4 (Picture 6) After the upload is successfully finished, the E-bot will proceed with the file unpacking internally. It may take approximately 30 seconds. When the unpacking is finished the E-bot will power off by itself. Power on the E-bot. The E-bot will start after the upgrade is processed internally. It may take approximately 1 minute. Step 3: Second Wi-Fi Upgrade Connect PC and E-bot by Wi-Fi connection in order to begin the 2 nd Wi-Fi Upgrade. *Refer to pages 22 and 23 of the E-bot ADV user manual, Connecting to a PC via Wi-Fi. **Do not connect the ipad Viewer or Android Viewer to the E-bot via Wi-Fi while upgrade is in process. Execute Wifi_upgrade_client (EB100A).exe file in the 2nd Upgrade folder. If E- bot is connected to PC via Wi-Fi correctly you will see that the status is installed. (Picture 7) ***Note: If the status of some Country is displayed as a blank space or Not installed due to the missing TTS data file, you must proceed the upgrading of TTS data after the first and second Wi-Fi upgrade. 4
5 (Picture 7) Click the Upload file button. The transferring of files will start. (Picture 8) (Picture 8) The file transferring may take approximately 2 minutes. When the file transferring is finished you will see Uploading file is finished successfully. Click the Exit button. (Picture 9) 5
6 (Picture 9) After the upload has successfully finished, the E-bot will proceed with the file unzipping internally. It may take approximately 1 minute. When the unpacking is finished the E-bot will power off by itself. Power on the E-bot. The E-bot will start after the upgrade is processed internally. It may take approximately 2 minutes. After the E-bot starts press the Menu button on the wireless remote controller. Go to Options and then Information. (Picture 10) (Picture 10) 6
7 TTS Data Upgrade TTS Data Upgrade is not necessary for E-bot Basic model, as it does not provide OCR. TTS Data Upgrade is necessary if the version of E-bot ADV is earlier than v Note: If you want to upgrade TTS data regardless of the version, you may do so. A. What you will need Windows PC which can upgrade TTS data file. USB OTG Cable B. The Steps Phillips head Screw driver Step 1: Step 2: Step 3: Step 4: Remove case on the E-bot ADV and connect USB OTG cable. Connect E-bot via USB OTG. Download the files from the web. Execute upgrade file. Step 1: Disassemble the E-bot ADV Remove the battery. (Pictures 11 and 12) (Picture 11) 7
8 (Picture 12) Remove the 4 screws. (Picture 13) Lift the upper case. (Picture 14) (Picture 13) (Picture 14) Remove the rear panel. (Pictures 15 and 16) 8
9 (Picture 15) (Picture 16) Step 2: Connect E-bot to the OTG cable Connect E-bot to your PC using the USB OTG cable. Press the power button to turn on E-bot. (Picture 17) (Picture 17) Download the file from the link below and start. Then you will see a dialog box. (Picture 18) 9
10 (Picture 18) Click the Install button. The device status should change from Driver Incorrectly to OK when installing driver has finished. (Picture 19) (Picture 19) Step 3: Download the Files from the Web Download the files by clicking on the link below. EB100A_TTS_Upgrade.zip Unzip the file. You will see one folder and eleven files. (Picture 20) 10
11 - (Picture 20) Step 4: Execute Upgrade File Start the Upgrade_TTS.bat file. You will see a dialog box. (Picture 21) It will show the install status and it may take approximately 17 minutes. (Picture 21) When the upgrade is finished the dialog box will close automatically. 11
12 After the TTS is finished upgrading, the E-bot will power off and restart itself. It may take approximately 1 minute. After TTS data upgrade is finished press the power button to turn the E-bot off. Reassemble the upper case and base plate of the E-bot. Upgrades are now complete. 12
E-bot PRO Firmware Upgrade Manual for v1.3.0
E-bot PRO Firmware Upgrade Manual for v1.3.0 This manual introduces Firmware upgrade and TTS date upgrade. The firmware upgrade is necessary. The TTS data upgrade is not necessary if the version of E-bot
More informationWireless Setup Manual
Wireless Setup Manual Before you begin the wireless setup process, please choose the installation method. 1) To setup your printer using drivers from the web continue to page 2 2) To setup your printer
More informationFor your safety and protection of the E-bot, please read and abide by the following important safety precautions.
2 P age Safety Precautions For your safety and protection of the E-bot, please read and abide by the following important safety precautions. 1) Do not plug the AC adapter into a faulty electrical outlet.
More informationCTC firmware upgrade manual Software installation and description for upgrading firmware on the CTC series circuit board. James Campion
CTC firmware upgrade manual Software installation and description for upgrading firmware on the CTC series circuit board. James Campion 14 10 2016 Requirements. PC running Microsoft OS Windows XP, 7 (32&64bit),
More informationNote: ID station must be connected to internet to successfully add an Eye-Fi card.
How To : add an Eye-Fi card Introduction When you need to add an Eye-Fi card to ID station (because for example the original SD Eye-Fi card is lost) this manual shows you what to do. You can also use this
More informationnettalk DUO WiFi Configuration (using an Android smartphone)
nettalk DUO WiFi Configuration (using an Android smartphone) Step 1. Activate your Device a. Locate your username and password inside of the box. b. Go to www.nettalk.com/activate and follow the activation
More informationDPS NG. Pitot-Static Test Set. Field Firmware Update Procedure Via USB and Barfield ADTS App P/N (DPS1000) P/N (1811NG)
DPS1000 1811NG Pitot-Static Test Set Field Firmware Update Procedure Via USB and Barfield ADTS App P/N 101-01175 (DPS1000) P/N 101-01178 (1811NG) Doc. P/N: 42-101-01175_01178 Revision E October 10, 2017
More informationThis manual is to explain the procedure for updating the AU-XPD1 firmware on Windows.
Firmware Update This manual is to explain the procedure for updating the AU-XPD1 firmware on Windows. Operating Environment Please perform this update for AU-XPD1 in the following environment. OS: Windows
More informationConnection Guide (for D SLR Cameras) En
SB7J02(11)/ 6MB41011-02 Connection Guide (for D SLR Cameras) En Table of Contents Introduction...2 The Interface...2 Trouble Connecting?...2 More on SnapBridge...2 What You ll Need...3 What SnapBridge
More informationINTRODUCTION CONTENTS
INTRODUCTION The Open OPD3 app is a tool that is used to review OPD3 data on an ipad. Reports (summaries) are exported from the main unit (OPD3) or from the external OPD-Scan PC software where they can
More informationPadFone Infinity. Standard Operating Procedure for Upgrading the Firmware to Android Kit Kat
PadFone Infinity E9675 Standard Operating Procedure for Upgrading the Firmware to Android Kit Kat Download the latest firmware from the ASUS Support site and follow the instructions described in this guide
More informationE-bot offers a variety of powerful features for low vision students and users of all ages including the following:
2 Page Congratulations on your purchase of the E-bot. The E-bot, short for Education Robot, is a transportable video magnifier designed to meet the needs of the low vision student in a variety of situations.
More informationRegistering Your D1 with the System (Windows 2000)
Registering Your D1 with the System (Windows 2000) Before You Begin Confirm that your OHCI-compliant IEEE 1394 board or card has been correctly recognized by the system. If the board or card has been correctly
More informationS2USB485 USB to RS-485 and RS-232 Converter
S2USB485 USB to RS-485 and RS-232 Converter Introduction The S2USB485 is a USB to full-duplex RS-232 and half-duplex RS-485 serial converter integrated into a single device. In essence the S2USB485 is
More informationlinkzone User ManUal
LINKZONE User Manual Getting to Know Your Mobile Hotspot Power key WPS key LED indicator USB jack LED Description Part Power key WPS key LED indicators Charging / USB Port Reset Reboot Description Hold
More informationField PC 2 Windows OS Update Guide
Field PC 2 Windows OS Update Guide All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the
More informationConnection Guide (for KeyMission 80)
Connection Guide (for KeyMission 80) Table of Contents Installing the SnapBridge app... 2 Connecting the Camera and a Smart Device... 3 Image Upload and Remote Photography... 7 Troubleshooting... 9 This
More informationInstallation Manual. ID station. CamFi controller
ID station CamFi controller Last change : July 12th, 2016 1 Introduction This manual will guide you through the process of connecting a CamFi controller to your camera and pairing it to an ID station.
More information9" TABLET MODEL: SC-999 USER MANUAL
9" TABLET MODEL: SC-999 USER MANUAL Preface Thank you for buying the MID. We wish you enjoy using it. Please read and retain all the operating instructions before operating the unit, we do not assume any
More informationHow to update FOCUS 30 Firmware
14 March 2013 How to update FOCUS 30 Firmware This support note will guide you through updating the firmware on a FOCUS 30 instrument. Note : If your FOCUS 30 has previously received a firmware upgrade
More informationDo not place or mount Ocli 1 in an area where it will be exposed to water. Ocli 1 is designed for indoor use.
1 Manual: Ocli 1 with Observeye Viewer App for Android Setting Up Ocli 1 Live Viewing with Ocli 1 Recording Video and Taking Snapshots Using Advanced Features Setting Up Ocli 1 Place or Mount the Camera
More informationSERVICE DOCUMENT: GOCYCLECONNECT APP DOWNLOAD & REGISTRATION FOR ANDROID DEVICES UPGRADING FROM FIRMWARE PRE-VERSION 72
SERVICE DOCUMENT: GOCYCLECONNECT APP DOWNLOAD & REGISTRATION FOR ANDROID DEVICES UPGRADING FROM FIRMWARE PRE-VERSION 72 Version 1.0 Download & Registration of the GocycleConnect App for Android Devices
More informationWireless-N USB Network Adapter. with Dual-Band QUICK INSTALLATION GUIDE. Package Contents
QUICK INSTALLATION GUIDE Wireless-N USB Network Adapter with Dual-Band Model: WUSB600N Package Contents Wireless-N USB Network Adapter with Dual-Band USB Extension Base with 59" cable Setup Wizard CD-ROM
More information-Windows- Upgrading the D2H Firmware. Get ready. Check the current firmware version for the D2H
Upgrading the D2H Firmware -Windows- Thank you for choosing a Nikon product. This guide describes how to upgrade the camera firmware for the D2H. If you are not confident that you can perform the update
More informationAcer Aspire S Wi-Fi Card
Acer Aspire S3-951-6432 Wi-Fi Card Replacement How to remove and replace the Acer Aspire S3-951-6432's Wi-Fi card that is not working. Written By: Cynthia Bennett ifixit CC BY-NC-SA www.ifixit.com Page
More information2016 Copyright Brüel & Kjær. All rights reserved
3660-A-20x SETUP GUIDE 2016 Copyright Brüel & Kjær. All rights reserved 1-module Wireless LAN Frame Type 3660-A-20x allows wireless connection to a LAN-XI module. It can be used in general analysis applications
More informationGuide to Using the AK240 MQS Streaming Server. Windows 7/8 (32&64bit)
Guide to Using the AK240 MQS Streaming Server Windows 7/8 (32&64bit) Installing & Running the MQS Streaming Server: The AK240 can access music files stored on computer on the same network. 1. Download
More informationFirmware upgrade guide
Firmware upgrade guide Generic AW Preparation notice: Upgrading the firmware of your tablet may enhance the performance and functionality of your tablet. Incorrect followup of the steps described in this
More informationUpdating the Firmware for Digital SLR Cameras (Mass Storage) Macintosh
Updating the Firmware for Digital SLR Cameras (Mass Storage) Macintosh Thank you for choosing a Nikon product. This guide describes how to perform this firmware update. If you are not confident that you
More informationLabel Printer QL-810W/820NWB. Quick Setup Guide (English)
Label Printer QL-810W/820NWB Quick Setup Guide (English) Label Printer QL-810W/820NWB Printed in China D00RPG001 Quick Setup Guide (English) Available Manuals Product Safety Guide This guide provides safety
More information1. Use Wireless Data Transfer with FlashAir App for
Wireless Data Transfer: Basic Usage of FlashAir Wireless Data Transfer function allows you to browse and save files from the device (e.g. a digital camera) to smartphones, tablets, or PCs without cable
More informationHTC Magic Required Software Update
OVERVIEW THIS IS A CRITICAL SOFTWARE UPDATE PROVIDED BY HTC TO ENABLE 911 CALLING ON YOUR PHONE. And also provides the following enhancement: Introduces HTC Sense - an intuitive user interface You will
More informationIntroduction. Package Checklist. Minimum System Requirements. Registering Your Product. More Help
Introduction Keep a watch on your family, pet, home or office 24/7, even when you re not there. Creative Live! Cam IP SmartHD gives you a live update on your phone, wherever you are. Get activity alerts,
More informationThe Firmware Update is a tool that easily updates the embedded components on your FTB-1.
FTB-1 Introduction The is a tool that easily updates the embedded components on your FTB-1. Note: The tool replaces the old Embedded Software Updater (ESU). Release History This release of includes the
More informationNetwork Camera Firmware Upgrade Quick Guide
Network Camera Firmware Upgrade Quick Guide 09-2018 / v1.0 1 CONTENTS I Introduction... 3 II How to Upgrade Firmware for Network Camera... 4 III Download App... 11 2 I Introduction To strengthen the security
More informationConnection Guide (for COOLPIX)
Connection Guide (for COOLPIX) This document describes the procedure for using the SnapBridge app (Version 2.0) to establish a wireless connection between a supported camera and smart device. When you
More informationUPS model : 9PX/9SX 1:1 5 to 22kVA
UPS model : 9PX/9SX 1:1 5 to 22kVA Date : 02/09/2016 Eaton setups_9px-9sx_1-1_5to22k_firmware_upgrade_rev_03 Page 1/14 Contents 1. Download the software setups and the firmware (if receiving this document
More informationThis bulletin was created to inform you of a firmware update that provides upgrades to the P-4000.
EPSON Product Support Bulletin Date: 2/25/2010 Originator: jd PSB #: PSB.2010.03.002 Authorization: Reference: TE09-0219 Rev. A Total Pages: 5 Product(s): Epson P-4000 Multimedia Storage Viewer Subject:
More informationConfiguring the WT-4 for ftp (Infrastructure Mode)
Configuring the WT-4 for ftp (Infrastructure Mode) Configuring the WT-4 for ftp (Infrastructure Mode) Windows 7 This document provides basic instructions on configuring the WT-4 wireless transmitter and
More informationIMPORTANT NOTE for. Choose the zip file v and unzip it in USB. Do not rename the UPG folder. Follow
IMPORTANT NOTE for (HTB3280G/12 HTB3520/40/55/94/98 HTB3520G/12/51 HTB3550/40/98 HTB3550G/12 HTB3580/40/79/98 HTB3580G/12/51 HTB4520G/51 HTB4580G/51 HTB5260G/12 HTB5520/55/94/98 HTB5520G/12 HTB5550/98
More informationMB50 Quick Start Guide Sheet 1
MB50 Quick Start Guide Sheet 1 STEP 1 REMOVE AC CORD & Wi-Fi ANTENNAS REMOVE AC/DC POWER SUPPLY STEP 2 STEP 3 REMOVE PROTECTIVE COVER INSTALL BATTERIES REMOVE REMOTE CONTROL COVER REMOVE SCREW REMOVE UNIT
More informationUpdating the Firmware for Digital SLR Cameras (Mass Storage) Windows
Updating the Firmware for Digital SLR Cameras (Mass Storage) Windows Thank you for choosing a Nikon product. This guide describes how to perform this firmware update. If you are not confident that you
More informationFirmware Update Instruction Manual
Firmware Update Instruction Manual This manual explains the procedures for downloading the GR DIGITAL II firmware from the Ricoh website and updating the camera s firmware. Perform the following operations
More informationFTM-100DR/DE. DSP Firmware Update Instruction Manual YAESU MUSEN CO., LTD.
FTM-100DR/DE DSP Firmware Update Instruction Manual YAESU MUSEN CO., LTD. Introduction This application is a software tool for updating the firmware of transceivers manufactured by Yaesu Musen Co., Ltd.
More informationDell Inspiron E1705 Heat Sink Replacement
This guide will show you how to open your Dell Inspiron E1705 and install the heat sink. Written By: Malik Shahbal ifixit CC BY-NC-SA www.ifixit.com Page 1 of 9 TOOLS: Phillips #1 Screwdriver (1) ifixit
More informationChapter 1: Introduction. Chapter 2: Getting Started
Chapter 1: Introduction Media Player 200 is a Digital Media Player that includes a connector for a USB storage device and card reader. The Media Player 200 connects to your home entertainment center allowing
More informationMID MODEL: M1703 USER MANUAL
MID MODEL: M1703 USER MANUAL Preface Thank you for buying the MID. We wish you enjoy using it. Please read and retain all the operating instructions before operating the unit, we do not assume any liability
More informationHow to disassemble Toshiba Satellite T135, T135D, T130, T130D laptop base.
How to disassemble Toshiba Satellite T135, T135D, T130, T130D laptop base. In this guide I show how to disassemble a Toshiba Satellite T135 laptop base. All laptop disassembly steps should be very similar
More informationipf PRO Service Tool Manual For Ver
ipf PRO Service Tool Manual For Ver.1.0.1.2 Contents 1. Objective...1 2. Supported Model...1 2-1. Canon Model...1 3. Operation Condition...2 3-1.Host PC Hardware Specifications...2 3-2.Host PC Software
More informationRJ-2030/2050/2140/2150
LBF85700 Unpacking Your Printer Check that the package contains the following before using your printer: RJ-030/050/40/50 Quick Setup Guide English Printer Rechargeable Li-ion Battery Belt Clip Thank you
More informationInstruction with Screenshot for WEB
Instruction with Screenshot for WEB Step 1: Attaching your external USB storage device: You can attach USB flash disk, USB HDD, USB card reader as your NAS. However, attaching a cell-phone or tablet as
More informationLenovo B. Quick Start Guide. Lenovo A2016b30. Read this guide carefully before using your smartphone.
Lenovo B Quick Start Guide Lenovo A2016b30 Read this guide carefully before using your smartphone. Reading before using your smartphone For your safety Before assembling, charging or using your mobile
More informationTechnical Bulletin DS2
Product: DS-Matrix Software TB 221 Date: July 25 th, 2012 Subject: How to Upgrade DS-Matrix Software This document describes the procedure for upgrading the DS-Matrix software. If you are upgrading from
More informationConfiguring the WT-4 for ftp (Infrastructure Mode)
En Configuring the WT-4 for ftp (Infrastructure Mode) Mac OS X Introduction This document provides basic instructions on configuring the WT-4 wireless transmitter and a Mac OS X (10.5.2) ftp server for
More informationWindows. Upgrading the Firmware for the D40. Get ready
Upgrading the Firmware for the D40 Windows Thank you for choosing a Nikon product. This guide describes how to upgrade the camera firmware for the D40. If you are not confident that you can perform the
More informationSPDS v2.0 The Smart Way to Analyze and Fix the Printer
SPDS v2.0 The Smart Way to Analyze and Fix the Printer Solution Intro What is the SPDS? SPDS (Smart Printer Diagnostic System)? - Smart Printer Diagnostic System is the one and only service available that
More informationINSTRUCTIONS TO UPDATE FIRMWARE FOR
INSTRUCTIONS TO UPDATE FIRMWARE FOR Dranetz 1000 New Durham Road, Edison, New Jersey 08818 Telephone 1-800-372-6832 or 732-287-3680 Fax 732-248-1834 www.dranetz.com Updating the HDPQ SP s Firmware The
More informationBIODEX. DOWNLOAD INSTRUCTIONS FIRMWARE UPGRADE v1.3x. FOR ATOMLAB 500, ATOMLAB 500Plus DOSE CALIBRATORS & ATOMLAB WIPE TEST COUNTER
DOWNLOAD INSTRUCTIONS FIRMWARE UPGRADE v1.3x FOR ATOMLAB 500, ATOMLAB 500Plus DOSE CALIBRATORS & ATOMLAB WIPE TEST COUNTER 086-330 086-332 086-331 BIODEX Biodex Medical Systems, Inc. 20 Ramsey Road, Shirley,
More informationUSB-MIDI Driver installation and settings...1 Windows XP users... 1
Installation Guide Table of Contents USB-MIDI Driver installation and settings...1 Windows XP users... 1 Installing the KORG USB-MIDI Driver... 1 Allowing driver installation without a digital signature...
More information3G WIFI ROUTER/POWERBANK Quick Guide
3G WIFI ROUTER/POWERBANK Quick Guide The factory default password WIFI connection: 12345678 Initial Account: admin Default password: admin Ports: 21 3GWi-Fi is one Power bank and mobile 3G wifi router
More informationAMC Manager User's Manual
WA102520XA AMC Manager User's Manual Copyright 2016 silex technology, Inc. All rights reserved. Index 1. Introduction...1 1-1. Introduction...1 Disclaimers...1 Trademarks...1 2. What is AMC Manager?...3
More informationAG-HMR10 Software (Firmware) update procedure
AG-HMR10 Software (Firmware) update procedure 1. Version Information AG-HMR10 update procedure Dec. 2009 1-1. Use P2 Status Logger Please use "P2 Status Logger" application software for making sure the
More informationIntroduction: Preparation for firmware update:
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to update the firmware of your
More informationSOFTWARE USER S GUIDE
SOFTWARE USER S GUIDE RuggedJet series The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice
More information(The model number in all attached pictures is only an example) 1. Introduction
(The model number in all attached pictures is only an example) 1. Introduction The version of this software is ver1.13 2. Key Features added in this software version Initial release 3. Software Version
More information1. Install the FPVCAM app from the App Store (Apple ). 2. Turn on the controller and plug in the battery for the Ominus FPV.
App Setup APPLE iphone SETUP 1. Install the FPVCAM app from the App Store (Apple ). 2. Turn on the controller and plug in the battery for the Ominus FPV. 3. Go to the Wi-Fi setting on your phone and check
More informationInstallation Manual Crescendo /L2 Processor Upgrade Cards 2000 Sonnet Technologies, Inc. All rights reserved.
Installation Manual Installation Manual Crescendo /L2 Processor Upgrade Cards 2000 Sonnet Technologies, Inc. All rights reserved. Sonnet Technologies, Inc. 15 Whatney Irvine, California 92618-2808 USA
More informationVIEVU 2 Configuration Utility User Guide
Version 1.0 VIEVU 2 Configuration Overview This guide describes how to use the VIEVU 2 Configuration Utility to modify settings or upgrade the firmware on a VIEVU 2 wearable video camera. Contact Us If
More informationUpdating Firmware for Selected Cameras with Location Data Support
Updating Firmware for Selected Cameras with Location Data Support Thank you for choosing a Nikon product. This guide describes how to update the firmware for the following cameras with location data support:
More informationTECHNICAL DOCUMENT. Upgrading to PathPilot v2.0.x. 1.1 What's New in PathPilot v2.0.x
Upgrading to PathPilot v2.0.x Product Identification: This kit includes one PathPilot v2.0.x Installation USB Drive. Purpose: This document gives instructions on installing the PathPilot v2.0.x upgrade.
More informationDCH-G022 mydlink Connected Home Hub
DCH-G022 mydlink Connected Home Hub User s Manual Version 1.0 Jun. 25 th, 2016 Page 1 Table of Contents 1. PRODUCT DESCRIPTION... 3 2. APPEARANCE... 3 3. APPLICATIONS... 4 4. INSTALLATIONS & BASIC CONFIGURATIONS...
More informationNikon Coolpix S9700 Screen Replacement
Replace your screen if it is cracked, scratched, pixels are dead, or completely not working. Written By: Matt Staubus ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 INTRODUCTION If the screen on the S9700
More informationSnapBridge Connection Guide (Android TM )
En SB7E02(11) 6MB37911-02 SnapBridge Connection Guide (Android TM ) Read this guide for information on using SnapBridge to pair your camera with your smart device (smartphone or tablet). Get SnapBridge
More informationCongratulations on your purchase of the E-bot Advanced.
2 Page Congratulations on your purchase of the E-bot Advanced. The E-bot, short for Education Robot, is a transportable video magnifier designed to meet the needs of the low vision student in a variety
More informationThuraya SG-2520 Software Upgrade Manual
Thuraya Satellite Telecommunications Company Thuraya SG-2520 Software Upgrade Manual V. 1.4 JUNE, 2007 COPYRIGHT 2007 THURAYA SATELLITE TELECOMMUNICATIONS COMPANY ALL RIGHTS RESERVED Important: Please
More informationInstalling Your Multifunction to Your Network for the First Time
Installing Your Multifunction to Your Network for the First Time PIXMA MG5420 Macintosh OS 1 Installing Your Multifunction to Your Network for the First Time PIXMA MG5420 Macintosh OS Preparing to Connect
More informationInstructions for MX350 Firmware Upload
Instructions for MX350 Firmware Upload MX350 Document AN10048 Page 1 of 39 Contents Section Description Page 1 Requirements 3 2 Install MX350 Setup Software 3 3 Download MX350 Firmware 4 4 Connect MX350
More informationQL-1110NWB. Applications for Use with Computers. Applications for Use with Mobile Devices. Quick Setup Guide (English) NOTE
D00ZC6001 QL-1110NWB Quick Setup Guide (English) Thank you for purchasing the QL-1110NWB Label Printer! Read the Product Safety Guide first, then read this Quick Setup Guide for the correct setup procedure.
More informationWeb management. How to access to the web management. Log into the web management via a laptop
Web management Your InstaShow is equipped with the web management that enables you to configure its features through a browser such as Google Chrome, Internet Explorer, or Firefox. The features may vary
More informationTable of Contents. Description of the BlackVue App 3. Supported Devices 4. Screen Description 5. Connection of BlackVue to a Wi-Fi connection 9
Car Dashcam Table of Contents Description of the BlackVue App 3 Features 3 Supported Devices 4 Screen Description 5 Connection of BlackVue to a Wi-Fi connection 9 Menu Description 12 Recorded video playback
More informationConfiguring a TPLINK Router. TP Link Archer AC1200 Basic Configuration Steps
Configuring a TPLINK Router TP Link Archer AC1200 Basic Configuration Steps Configuring Your Router STEP 1 (a): Connect Your PC to the Router Unbox the router and power up the router. Connect the Act internet
More informationBlaze EZ Quick Start Guide (Model: T70EZ) HIMS
Blaze EZ Quick Start Guide (Model: T70EZ) HIMS SELVAS Healthcare, Inc. 174, Gajeong-ro, Yuseong-gu, Daejeon, Korea 305-350 Phone: +82-42-864-4460 Fax: +82-42-864-4462 Email: hims@himsintl.com Website:
More informationGP-N100 Utility Software Manual
System Requirements En Thank you for your purchase of a GP-N100. This manual describes how to use the GP-N100 Utility to download the latest assisted GPS data from Nikon servers to your GP-N100. To ensure
More informationThe D3X has two sets of firmware, A and B. This upgrade affects only the B firmware.
Upgrading the Firmware for the D3X Macintosh Thank you for choosing a Nikon product. This guide describes how to upgrade the camera firmware for the D3X. If you are not confident that you can perform the
More informationFT2DR/DE. DSP Firmware Update Instruction Manual YAESU MUSEN CO., LTD.
FT2DR/DE DSP Firmware Update Instruction Manual YAESU MUSEN CO., LTD. Introduction This application is a software tool for updating the firmware of transceivers manufactured by Yaesu Musen Co., Ltd. CAUTION!
More informationUpdating Camera Firmware
Updating Camera Firmware Thank you for choosing a Nikon product. This guide describes how to perform this firmware update. If you are not confident that you can perform the update successfully, the update
More informationE-bot ADV offers a variety of powerful features for low vision students and users of all ages including the following:
2 P a g e E-bot ADV offers a variety of powerful features for low vision students and users of all ages including the following: 1) Easy To Use Easily set up and transport from classroom to classroom,
More informationRTC-Bridge User Manual
RTC-Bridge User Manual Contents RTC-Bridge User Manual... 1 What is RTC-Bridge... 2 Getting started with RTC-Bridge... 2 Basic Configuration of the RTC-Bridge... 3 Setting House Number and Geographic Location...
More informationGuardzilla has three ways to add a camera in the app. Scroll to the section that meets your needs. Are you
Guardzilla has three ways to add a camera in the app. Scroll to the section that meets your needs. Are you 1. Section A assists with adding a newly purchased camera for configuration to your home Wi-Fi.
More informationTable of Contents. Manual Overview
Table of Contents Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions
More informationKYOCERA Net Viewer User Guide Supplement
KYOCERA Net Viewer User Guide Supplement Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be
More informationDELL U2410 USB FW Upgrade Instruction
DELL U2410 USB FW Upgrade Instruction Version 01 Important Note: There are risks in FW upgrade. The U2410 screen will be blank during the upgrade process. We recommend you upgrade the U2410 from a notebook
More informationInstructions to update Digimax application software (a.k.a. firmware)
Instructions to update Digimax application software (a.k.a. firmware) These instructions are for updating the application software from 1.0.0.0, V1.0.1.0, V1.0.2.0, 1.0.3.0 (07093001), & 1.0.3.0 (07110801),
More informationUPDATING OF THE TRS-5000 MACHINE FOR TP-10/14/16 (Ver.2.07)
UPDATING OF THE TRS5000 UPDATING OF THE TRS-5000 MACHINE FOR TP-10/14/16 (Ver.2.07) First of all please do download the necessary files which you will find in the publicity of the NEW TP10/14/16 at the
More informationSMARTIFY YOUR BUSINESS. PRINTING INNOVATION. The Smart way to analyze & fix the printer
SPDS V2.0 The Smart way to analyze & fix the printer Release Note Version Date Description Android V1.00.000 Sep 2013 First Android Version ios V1.05.000 Jan 2016 First ios Version V2.00.022 Oct 2016 Change
More informationInstalling your Nokia Home
Installing your Nokia Home 1. Installing the Nokia Home app 2. Plugging in your Nokia Home 3. Pairing your Nokia Home with your Device 4. Installing your Nokia Home: - Creating a Nokia account (optional)
More informationCommunication Device. Wireless Setup Instructions
Communication Device Wireless Setup Instructions Introduction The Communication Device can be setup for wireless usage, enabling you to move your meter to any location that is within the range of a wireless
More informationScanKey. User s Manual Version: Page 1 of 19
ScanKey User s Manual Version: 2014.1 Page 1 of 19 Table of Contents Chapter 1 - Installation... 3 1-1 Installation Precautions...3 1-2 Security Setup...4 1-3 Installing ScanKey...5 Chapter 2 Operation...
More informationEn Wireless Mobile Utility (ios) User s Manual. D750, D610, D600, D7200, D7100, D5500, D5300, D5200, D3300, Df
1 En Wireless Mobile Utility (ios) User s Manual Install the Wireless Mobile Utility on your ios device (iphone, ipad, or ipod touch) to download pictures from a camera or take pictures remotely. The Wireless
More informationUser Manual. Microdigital IP cameras with built-in Ivideon software
User Manual Microdigital IP cameras with built-in Ivideon software Table of Contents Introduction to Ivideon... What is Ivideon about?... Why use an IP camera with built-in Ivideon software?... How to
More information