DESCRIPTION Enter user name provided by ISP Enter password provided by ISP

Transcription

1 User name Password ICON Enter user name provided by ISP Enter password provided by ISP HTTP DDNS ICON Startup HTTP Check to enable HTTP server. Users can remotely access into the DVR over the network if the HTTP function is activated. HTTP Port Enter a valid port value from 1 up to The default value is 80. Auto Assign each channel with its maxima accessible fps No. Channel number Quality Set up record quality. There are below basic, basic, normal, high, highest FPS Setup record FPS

2 ICON Enable DDNS DDNS Server Host Name User Name Password Enable / Disable DDNS function Enter the registered SMTP Server: dyndns.org no-ip.org dnsexit.com ddnsipcam.com Enter the completed registered SMTP Server. (Including username + Server) If the user name is lilin304 and you choose dyndns.org as your server, you should enter: lilin304.dyndns.org Enter DDNS Server User Name Enter DDNS Server password Setup ICON Enable Notification ON / OFF Notification Function SMTP server Enter to set up SMTP Server name. (Varies according to the user) SMTP port Normally it is 25 User Name Enter to set up User Name Password Enter to set up Password. Enter to select events to send out notifications when Trigger Mode below circumstances happen: Motion, Sensor and Voss (Video Loss). Sender Enter to set up address of receivers Receiver Enter to set up addresses for up to 6 receivers individually

3 4-6. Data Backup Setup ICON DATA BACKUP CD/DVD data backup Save DVR Setup to USB Get DVR Setup from USB Restore Factory Settings Clean Event Record System Update ENTER DATA BACKUP MENU Enter CD/DVD DATA BACKUP MENU Enter backup to USB MENU Set the DVR to a USB device. USB will appear the file. Enter "Download Setup from USB settings menu The USB device settings, loaded to the DVR Enter Reduction factory settings Menu. Reduction the system settings to the initial value Enter Reset the system event menu. Remote all event record in DVR Enter System Update menu Through USB update DVR software Before Update,please backup DVR settings. Restart DVR after updating

4 4-7. System Setup ICON DVR NAME Display name for application software log remotely into the DVR. Language Setup OSD display language VGA Resolution 1024X768, 1280X1024, 1366x768 or 1440x900 Video Type Auto or Manual Menu / Key Lock On/Off DVR ID Number 0~63 Display setup Enter Display setup Time/ Date setup Enter Time/ Date setup User Account Enter User Account setup

5 Display Setup ICON Display Time On / Off Date and Time Display Display Camera Info. On / Off camera information Display Record Info. On / Off Record Information Display Control Relay On/ Off control relay Display Border On / Off Border Time Position up~ down RED 0~255 Border Color GREEN 0~255 BLUE 0~ Time / Date Setup

6 ICON Date Format Select Time zone Change Date/Time DayLight Saving Time Setup Internet Time Setup year/month/date, date/month/year, month/date/year Adjust to Greenwich Mean Time<GMT> On / Off Change date/time On / off Daylight saving time On / Off Network time Change Date / Time Setup Select the Year/Month/Date and press YES. Daylight Saving Time Setup ICON Daylight Saving Time Mode On / Off

7 Internet Time Setup ICON Automatically Sync Update Now Check to enable DVR automatic synchronization function. Effective by this option selected, DVR will automatically synchronize the time upon rebooting or by every 24 hours after booting. Effectively, Date and Time show on DVR will immediately correspond with those in internet server User Account Setup The Account Setup menu is used to provide role-based permission independently setting for each user (maximum of 4 users) to access DVR over network. The default admin account and password is admin and

8 ICON NUMBER NO USER NAME PASSWORD PERMISSION CHANGE ADMIN PASSWORD Check to activate the user s account Setup username Set up password for each user Set up Permissions for each user Change administrator s password Permission Setup

9 CHAPTER 5. Backup and Playback Search 5-1. Backup Setup User can backup any segment of recorded data in a specified time frame. To do so, either a CD R/W or storage device, like USB, must be connected to the DVR. Backup DVF file that can be played by DVFPLAYER NOTE:Use the USB flash backup, the system will automatically copy "DVFPLYER" to the USB. ICON Start Time End Time Backup Channel Backup Destination Free space Request space The start time of backup file The end time of backup file Choose 1~16CH Select USB or PC as the backup device The available space in the backup device Show the size of the backup file

10 DVF Player Usage Step1. Install DVR play software to your PC. You can get DVR play file from the CD with DVR Packing. PS. When you using USB to backup file, DVRplay.exe will copy to USB with the backup file automatically. Step2. Setup DVRPlaypack.exe Step3. Click open and choose and start a DVR backup file

11 Step4. DVRplay software will play the backup file automatically Playback Search Setup Play

12 ICON TIME SEARCH EVENT SEARCH Enter time search menu Event search menu Time Search TIME SEARCH can search for the specific time of recording data to playback. Press Enter or left click on the desired date to playback. Note that dates with recording data are marked with a red square System will start playing back according to the date you selected. Calendar will be shown by using mouse to click on year and month. Click date to display recording time of that specific date with time bar. You can change time (hour/minute/second) or click on a specific time of time bar by mouse then press OK. DVR will playback the selected recording data

13 CHAPTER 6. Remote Software Installation and Setup AP software: DVR Remote Desktop allows you to remotely access and control the DVR from PC. p.s. Operation system currently supports Windows XP SP2 and above and Windows Vista, Windows Application Software Installation and Setup Step1. Enter the IP address of DVR in IE browser Step2. Windows as below will show up. Please enter the user name and password. Default user name and password is admin/1111. Other related setup about user account and password, please check 4-5 Account Setup. The user name and password appeared in this image is only for demonstration. Actual user name and password depend on the setup of on-site DVR. Step3. Click on the link to start downloading the AP software

14 Step4. Run or Save our AP software Step5. If you choose to run the software, Start window will be shown up. Please enter information of login DVR: IP, Port, Username and Password, or choose Play Recorded File to open backup files in your PC. Step6. You are now logged onto the DVR

15 6-2. How to do remote monitoring through IE Step1. Enter the IP address of DVR in IE browser. The address appeared in this image is only for demonstration. Actual address is depending on the setup of on-site DVR. Step2. Windows as below will show up. Please enter the user name and password. Default user name and password is admin/1111. Other related setup about user account and password, please check 4-5 Account Setup. The user name and password appeared in this image is only for demonstration. Actual user name and password depend on the setup of on-site DVR. Step3. Click on Internet Explorer 6, 7, and 8 to start downloading the AP software. (The first option is for IE view, please refer to next chapter for more information)

16 NOTE:There will be IE connection security issue when clicking this link for the first time. Please refer to index II for Remote Monitoring IE ActiveX Control Installation Instruction. Step4. DVR image appear 6-3. How to remote monitoring through JPG Viewer (Monitor Function only) Step1. Enter the IP address of DVR in IE browser. The address appeared in this image is only for demonstration. Actual address will depend on the setup of on-site DVR

17 Step2. Windows as below will show up. Please enter the user name and password. Default user name and password is admin/ Other related setup about user account and password, please check 4-5 Account Setup. The user name and password appeared in this image is only for demonstration. Actual user name and password depend on the setup of on-site DVR. Step3. Click on LIVE JPEG Step4. DVR image appear NOTE:For view only. No operation function

18 6-4. Application software and IE operation System Requirements for AP software CPU RAM OS VGA card Antivirus software Others Intel Pentium 4 above 512M above Microsoft Windows 7 Windows Vista Windows XP SP2 above Need to support DirectX 9.0 (above) NOTE1 IE and AP connection need PORT80(according to HTTP PORT settings) DirectX 9.0 above NOTE1: Known VGA card that support DirectX9.0 currently: NVIDIA: Geforce FXseries, Geforce 6series, Geforce 7series, Geforce 8series, Geforce 9series, Geforce 200series, etc. Or visit: ATI: Radeon R300series, Radeon R400series, Radeon R500series, Radeon R600series, Radeon R700series, Radeon HD 3xxx IGPseries, Mobility Radeonseries (9500 above), Mobility Radeon Xseries, Mobility Radeon HDseries, or FireGL Vseries etc. Or visit: SiS: SiS 67Xseries, or SiS 77Xseries etc. Or visit: Intel: 91Xseries, 94Xseries, 96Xseries, G3Xseries, or G4Xseries, etc. Or visit:

19 CHAPTER 7. Digital Video Recorder DVR Specifications Model DVR204B DVR208B DVR216B Video System NTSC/PAL Control Panel Yes Compression H.264 Video Input BNC x4(1 Vp-p,75Ω) BNC x8(1 Vp-p,75Ω) BNC x16(1 Vp-p,75Ω) Video Output BNC x1/ VGA x1 BNC x1/ VGA x1 Audio Input/Output Input1/ Output1/ RCA Input1/ Output1/ RCA Input4/ Output1/ RCA Audio Backup Yes Recording Frame NTSC 120fps NTSC 240fps NTSC 480fps PAL 100fps PAL 200fps PAL 400fps D1 120fps(720x480) 120fps(720x480) 120fps(720x480) 100fps(720x576) 100fps(720x576) 100fps(720x576) Recording 120fps(720x240) 240fps(720x240) 240fps(720x240) Half D1 Resolution 100fps(720x288) 200fps(720x288) 200fps(720x288) CIF 120fps(352x240) 240fps(352x240) 480fps(352x240) 100fps(352x288) 200fps(352x288) 400fps(352x288) Recording Image Quality 5 Levels (Lowest/ Low/ Normal/ High/ Highest) Recording Mode Manual/ Event (Motion, Alarm)/ Filing Display Mode Time/ Event (Motion, Alarm) Search Mode 1,4 1,4,6,9 1,4,9,13,16 Mode Enlarge 8 times, PIP, Change Channel Cycle Languages Chinese, English, Multi-language Playback Speed Times 2,4,8,16,32,64 SATA/SATAⅡ HDD 1 x HDDs Max. (3TB) 2 x HDDs Max. (3TB) 2 x HDDs Max. (3TB) USB Backup USB2.0 Flash Memory Stick Network Backup Support Network Connection TCP/IP,DHCP,LAN,3G,DDNS,PPPoE Remote Monitoring Software Yes (AP Program,IE,CMX) Remote Alarm Notification ,SMS Push Notification (Mobile Security) Yes Motion Detection NTSC:22x15/ PAL:22x18 (Grid) Alarm Recording 1~60 Seconds Adjustable Video Loss Detection Yes Mobile phone connection Yes Buzzer Yes PTZ Control/ RS485 Yes Password Control/ Keypad Lock Yes Power AC100~240V/in, AC100~240V/in, AC100~240V/in, DC12V(4.17A/50W) DC12V(5A/60W) DC12V(5A/60W) Dimension 290mm x260mm x52mm 360mm x308mm x60mm 360mm x308mm x60mm Weight 1.7kg 2.5kg 2.7kg Abnormal Detection Watchdog Program

20 CHAPTER 8. Mobile Application Installation and Usage 8-1. iphone operating system installation and management (iviewerdvr software installation guide) Step 1 Step 2 Step 3 Connect your iphone to Internet and click into AppStore application Type iviewerdvr and hit the Search button at far right down corner Popup the app intro and indicating it s free of charge to download. Step 4 Step 5 Step 6 Go ahead click on Install to proceed downloading Enter your Apple login ID and password. Then hit Ok to confirm. Your iphone will appear iviewerdvr app

21 Step 7 Step 8 Step 9 Press iviewerdvr app Click the left down corner to add into DVR account information Hit Add button to add one DVR connecting data info (located at the far left end corner). Attention: In order to synchronize DVR with the application with no further technical issues, please make sure you enter & save your DVR data information into the app when first time initiating the app. Step 10 Step 11 Step 12 Popup entering DVR name, IP address, default gateway address, account login ID, and password. Then click on Save button. After saved, will appear a line indicating the specific DVR name. Click onto the name you would to view, then you will be able to view the live time surveillance images. Your connection to livetime viewing quality will be affected by your Internet stability & reliability. The general rule of thumb, DVR livetime images shall show without problem under good Internet connecting circumstance

22 8-2. Google Android Phone operating system installation and management (iviewerdvr software installation guide) Step 1 Connect your Android phone to Internet and enter Market (PLAY store) application. Step 2 Type in iviewerdvr Step 3 Click onto iviewer DVR app then click Install button Step 4 Hit Confirm to authorize your device Step 5 iviewer DVR app should now appear on your phone Step 6 Click on iviewer DVR app to initiate connection

23 Step 7 Click Yes to add DVR login account information Step 8 Popup entering DVR name, IP address, default gateway address, account login ID, and password. Then click on Add button. Attention: In order to synchronize DVR with the application with no technical issues, please make sure you enter & save your DVR data information into the app when first time initiating the app. Step 9 After saved successfully, it should pop-up a line indicating DVR. Double click on DVR will route you to log in viewing the livetime viewing images