Application Instruction Manual (City/Trekking Edition)

Transcription

1 (English) HM-EC Application Instruction Manual (City/Trekking Edition) Thank you for purchasing Shimano products. This instruction manual explains the operation of the E-TUBE PROJECT. Be sure to read this manual before use in order to fully utilize the functions. In order to use E-TUBE PROJECT, the SM-PCE1 or SM-BCR2 interface is required. Check the following support site for the latest support information.

2 CONTENTS Model corresponding to each part... 3 CUSTOMIZE... 4 Drive unit setting... 5 Display monitor settings... 7 Switch setting... 9 Switch mode setting Switch function setting Derailleur adjustment setting Motor unit gear setting ERROR CHECK UNIT LOG ACQUISITION PRESET ABOUT THIS DOCUMENT REGISTERED TRADEMARKS AND TRADEMARKS / 21

3 Model corresponding to each part Model corresponding to each part SW-E SW-S DU-E6000, DU-E6001, DU-E6010, DU-E6050(BOSCH ebike drive unit) 4. MU-S BT-E BT-E SW-M9050-L/R, SW-M8050-R 8. SC-E6000, SC-E / 21

4 CUSTOMIZE This function is used to customize the E-BIKE system. The BOSCH ebike Drive Unit and other E-BIKE Drive Units cannot be customized with E-TUBE PROJECT. 1. Click [Customize] in the main menu screen. (Main menu screen) 2. Click [Drive unit setting], [Display monitor settings], [Switch setting], [Derailleur adjustment setting], [Motor unit gear setting] in the customize menu screen to go to each setting screen. (Customize screen) 4 / 21

5 Drive unit setting Configure the settings of the drive unit. 1. Click [Customize] in the main menu screen. 2. Click [Drive unit setting] in the customize menu screen. 5 / 21

6 3. Click each item to select the settings description. The items that can be set are as follows. Item Description [Light connection] [Start mode] [Automatic gear shifting] Select [Yes] when connecting a light or [No] when not connecting a light. Switches the start mode on or off. You can change gear position when on is selected. The auto shifting setting window is displayed. You can select whether auto shifting is enabled, disabled, and the auto shifting adjust values. 6 / 21

7 Display monitor settings Configure the settings of the display monitor. 1. Display the customize menu screen. 2. Click [Display monitor settings] in the customize menu screen. 3. Click each item to select the settings description. <SC-E6000> 7 / 21

8 <SC-E6010> The items that can be set are as follows. Item Description [Display units] You can select the International System (km) or the Imperial System (mile) of units. [Display switchover] [Time setting] [Beep setting] [Backlight setting] [Brightness] You can select whether to display the items [Traveling time], [Average speed], [Maximum speed], and [Range overview]. You can adjust the time setting. You can select whether to turn the beep on or off. You can select whether to turn the backlight on, off or manual. You can select backlight brightness from among 5 levels. This menu can only be set using SC-E6010. [Display language] [Font color] You can select the display language from [English], [French], [German], [Dutch], [Italian], and [Spanish]. The font color can be set to white or black. This menu can only be set using SC-E6010. * Click [Restore default values] and then [Set] to reset the settings to default. 8 / 21

9 Switch setting 1. Display the customize menu screen. 2. Click [Switch setting] in the customize menu screen. 3. Click [Switch mode setting] or [Switch function setting] to go to each setting screen. 9 / 21

10 Switch mode setting SW-E6000 can be used as the assist mode switch or gear shifting switch. You can select which mode to use. On the E-TUBE PROJECT screen, the assist mode switch is indicated as [SW-E6000 for Assist] and the gear shifting switch is indicated as [SW-E6000 for Shift]. Configure the setting according to the instructions displayed on the screen. 10 / 21

11 Switch function setting You can change the functions to assign to switches (X), (Y) and (Z). 1. Click [Switch function setting] in the switch setting screen. 2. Select the desired setting for each switch. * Click [Restore default values] and then [Set] to reset the switch functions to default. 11 / 21

12 SW-E6000 for Assist Item [Display/Light] [ASSIST UP] [ASSIST DOWN] Description Switch the screens of the display monitor. * Holding down the switch turns the light on or off. Raise the level of assistance in the assist mode. Lower the level of assistance in the assist mode. * This setting is effective only when [Yes] is selected for light connection in the drive unit setting. SW-E6000 for Shift Item [Display] [Rear Shift Up] [Rear Shift Down] Description Switch the screens of the display monitor. The internal geared hub shifts from a light gear to a heavier gear. The internal geared hub shifts from a heavy gear to a lighter gear. 12 / 21

13 Derailleur adjustment setting The derailleur can be adjusted. * Usually, this operation is not necessary. 1. Display the customize menu screen. 2. Click [Derailleur adjustment setting] in the customize menu screen. 3. Click [Down] / [Up] to adjust. Displays the current set value in [Setting Value]. (-4 to +4) Displays the current number of sprockets in [Gear position]. (1 to 8 or 1 to 11) * During this operation, the derailleur will not operate even when the shift switch of SW-S705 and SW-E6000 is operated. * The crank does not need to be rotated for operations related to adjustment and gear-shifting. 13 / 21

14 The settings to be adjusted are as follows. [Adjustment setting] [Gear position change] item [Down] [Up] [Down] [Up] Description The components that control gear-shifting rotate in the direction to indicate a lighter gear (clockwise, direction of "-" indication). The components that control gear-shifting rotate in the direction to indicate a heavier gear (counterclockwise, direction of "+" indication). Gears will be shifted to a lighter gear. Gears will be shifted to a heavier gear. 4. Click [Set] to complete adjustment. 14 / 21

15 Motor unit gear setting MU-S705 can be used for hubs of SG-S705 (11 gears), SG-S505 (8 gears) and SG-C6060 (8 gears) by making additional settings. These settings can be made with the motor unit gear setting. * Before making the motor unit gear setting, check the derailleur to be installed. 1. Display the customize menu screen. 2. Click [Motor unit gear setting] in the customize menu screen. The items that can be set are as follows. Item Description [8 gear(s)] Select this when MU-S705 is installed to SG-S505 / SG-C6060. [11 gear(s)] Select this when MU-S705 is installed to SG-S Click any setting and then [Set] in the motor unit gear setting screen. 15 / 21

16 ERROR CHECK ERROR CHECK When a single unit or multiple units are connected, this function checks their operation and identifies any units which have a problem. 1. Click [Error check] in the main menu screen. 2. Select the unit you want to check and then click [Start diagnosis]. An error check of the selected unit will start. Perform operations following the instructions on the screen. 16 / 21

17 ERROR CHECK 3. If there are no errors, the square icon to the right of the unit name lights green. If there is a potential error, the square icon blinks red. 4. If there is a potential error, connect the unit on its own and perform the error check again. 17 / 21

18 ERROR CHECK 5. If there continues to be a potential error, even after the check is performed again, the square icon shall continue to blink red. In such cases, consult the place of purchase or a bicycle dealer. 18 / 21

19 UNIT LOG ACQUISITION UNIT LOG ACQUISITION Click [Unit log acquisition] on the main menu screen. Acquires various data from the connected units and displays them in a report format. The report is displayed in PDF format. In the report, you can check the settings of each unit and the battery status. 19 / 21

20 PRESET PRESET This function allows you to connect one or more units and read or write all the settings of those units at a time. The readout settings can be saved in a file. The settings can also be successively written to multiple bicycles. 1. Click [Preset] on the main menu screen. 2. Click the required menu item. 20 / 21

21 ABOUT THIS DOCUMENT ABOUT THIS DOCUMENT The contents of this document are subject to revision in the future without notice. Reproducing or transmitting this document in whole or in part in any form or for any purpose whatsoever without the express written permission of SHIMANO INC. is expressly forbidden. However, this is not to be taken as a limit on the customer s rights under applicable copyright laws. SHIMANO INC. may own the rights to any patents, patent applications, trademarks, copyrights and any other intangible property rights contained in this document. Unless otherwise specified, the customer is not granted rights to any patents, trademarks, copyrights or any other intangible intellectual property contained in this document. REGISTERED TRADEMARKS AND TRADEMARKS Shimano is a trademark or registered trademark of SHIMANO INC. in Japan and other countries. is a trademark of SHIMANO, INC. in Japan and other countries. Microsoft, Windows Vista TM, Windows 7, Windows 8, Windows 10 are registered trademarks or trademarks of Microsoft Corporation in the United States of America and other countries. All other company names, product names and service names, etc. are the property of their respective owners. One Holland, Irvine, California 92618, U.S.A. Phone: Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka , Japan Please note: specifications are subject to change for improvement without notice. (English) 21 / 21