D/N VARI-FOCAL IP IR CAMERA

Transcription

1 D/N VARI-FOCAL IP IR CAMERA PIH-0364X/0368X/0384X/0388X W/S N/P IP PIH-0364X/0368X/0384X/0388X W/S N/P IP H INSTRUCTION MANUAL

2 IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Head Warnings All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions All operating and user instructions should be followed. 5. Electrical Connections Only a qualified electrician should make electrical connections. 6. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Cable Runs All cable runs must be within permissible distance. 8. Mounting This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the unit. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. UNPACKING Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. Be sure to save: 1. The shipping carton and packaging material. They are the safest material in which to make future shipments of the equipment. 2. This Installation and Operating Instruction. SERVICE If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to return and shipping instructions.

3 Caution Do not drop or strike this equipment. Do not install the equipment near any naked flames or heat sources Do not expose this unit ot rain, moisture, smoke or dust environment. Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor ventilated places. Allow 10cm between this unit and its surroundings Do not continue to operate the unit under abnormal conditions such as detection of smoke, strange smell or no display on screen while power is turned on. Do not touch the power connection with wet hands. Do not damage the power cord or leave it under pressure. Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary magnetic interference. Connection cables should be grounded properly. Executive Summary PIH-036 /038 X W/S N/P IP & IPH (PIH-036/038IP) is a cost-effective and high performance IP IR Camera. High quality JPEG video can be transmitted over Internet. Build-in pushbutton key allows configuring IP address easily at installation site via a hand-held analog monitor. The combination use of dynamic global IP address by PPPoE and DDNS services provides the most economic way for Internet access. FTP continuous recording, remote PC recording, motion triggering FTP recording, and HTTPbased notification can provide recording capability in various mediums. These standard JPEG recording images are easy to access. There is no software installation required for accessing these recorded images. PIH-036/038IP adopts most recent technologies to ensure the security and flexibility. PIH-036/038IP provides useful Internet protocols including ARP, NTP, PPPoE, DDNS, DHCP, FTP, and SMTP. HTTP-based API (application programming interface) allows developers to integrate PIH-036/038IP with their existing products for these advance Internet protocols. With all the features, PIH-036/038IP is ideal solution for remote video monitoring via Internet. Trademark Acknowledgments Windows, Linux, Microsoft, Internet Explorer, DynDNS are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Other names of companies and their products mentioned in this manual may be trademarks or registered trademarks of their respective owners. Other Reference Merit Lilin IP-based product's full features can be accessed via HTML configuration page. For advanced HTTP network setting or development, please refer to HTTPAPI document in the product CD. 1

4 Table of Contents Chapter 1 Part Description & Dimension Chapter 2 Installation Chapter 3 System Overview Chapter 4 PIH-036/038IP System Architectures Chapter 5 Before Access PIH-036/038IP Chapter 5-1. Configure IP Address Using IPScan Utility Chapter 5-2. Configure IP Address Using Pushbutton Key Chapter Setup IP Address Chapter 5-3. Configure IP Address Using HTML Page Chapter 5-4. Internet Browser Setting & Software Component Required Chapter 5-5. Advance Network Port Forwarding Technology Chapter 5-6. Advance Network DDNS and PPPoE Technologies Chapter 5-7. Reset Default Chapter 5-8. IR-CUT Activation Chapter 6 Live Monitoring Chapter 6-1. Login Chapter 6-2. Menu Systems Chapter Video Property Chapter Recording Chapter Zoom Chapter 7 Start Using PIH-036/038IP Network Features Chapter 7-1. PIH-036/038IP Operational HTML Page Chatper 7-2. PIH-036/038IP Configuration Chapter Server Settings Chapter General Network Settings Chapter User Settings Chapter Timer Chapter System Setting Chapter 7-3. Network Chapter General Settings Chapter DHCP Setting Chapter PPPoE Settings Chapter DDNS Settings Chapter 7-4. Alarm Settings Chapter Motion Setup Chapter Motion Area Chapter 7-5. Video Settings Chapter Text Stamp Chapter Video Chapter IR Cut Removable Chapter 8 Specifications Chapter 8-1. Camera Chapter 8-2. IP System

5 Chapter 1. Part Description & Dimension SUN SHIELD TOP COVER BOTTOM CHASSIS BRACKET PAN ADJUSTMENT SCREW TILT ADJUSTMENT SCREW Unit : mm WINDOW SENSOR CAP Chapter 2. Installation 1. Take out the bracket from the box first. Put the power cable, RJ-45 network cable and video cable through the bracket and then fix it ot the wall (FIG.1 & FIG.2) FIG. 1 FIG. 2 3

6 2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3) FIG Put the power cable, RJ-45 network cable and video cable through the bracket rubble first and then go through the bottom of camera body (FIG.4). Plug and fix the power cable to the terminal, plug the RJ-45 network cable to RJ-45 LAN connector, and plug the video cable to output of the camera (FIG.5). FIG. 4 FIG. 5 Note : L Live Earth N Neutral When using two-cord power cable, please connect them to "Live" and "Neutral". 4. Next, use the provided 1/4"-20UNC screws (silver-4pcs) to fix the camera body on the bracket with hexagon screw driver (FIG.6) FIG. 6 4

7 5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired angle and then tighten the screws (FIG.7) FIG First, adjust the lens on focus and zoom to form the optimal video image after that tighten the screws. Adjust the IRIS level VR to form the optimal image brightness (FIG.8). Please refer to Chapter 5 Before Access PIH-036/038IP. FOCUS or ZOOM ZOOM or FOCUS IRIS LEVEL VR FIG Replace the top cover and tighten the screws (FIG.9 & FIG.10) FIG. 9 FIG. 10 5

8 Chapter 3. System Overview Top View Input/Output Device Component Description PowerLEDindicator(GreenLED) KeyRESET KeySET KeyMENU KeySELECT IPSetupMode/LiveVideoLooping ModeSwitch(SETUP/LIVE) SETUP LIVE BNCanalogvideooutput RJ-45LANconnector Chapter 4. PIH-036/038IP System Architectures For connecting PIH-036/038IP to the network, please follow one of the system architectures: Hardware Installation for LAN access Lan HUB Hardware Installation for Internet access Lan Internet / Ethernet HUB Router 6

9 Chapter 5. Before Access PIH-036/038IP Before accessing PIH-036/038IP, make sure that camera's analog BNC output, RJ-45 network cable, and PIH-036/038IP's power cable are properly installed. For setup IP address, please consult your network administrator for available IP addresses. The default IP address of PIH-036/ 038IP is User can also use default IP address to verify PIH-036/038IP's network connection. Chapter 5-1. Configure IP address using IPScan Utility To configure IP address using IPScan utility, copy IPScan application from installation CD to your local PC or execute IPScan software from installation CD directly. To change IP address, subnet mask, gateway, or HTTP port, please follow steps below: 1. Run IPScan utility. 2. Click on Refresh button. All available devices get listed in Device list box. 3. Select the device item in Device list box. 4. Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box. 5. Click on Apply button to configure the settings. 6. Click on Refresh button to verify the settings. 7

10 Chapter 5-2. Configure IP Address Using Pushbutton key To setup IP address using pushbutton key, please follow these steps: 1. Connect PIH-036/038IP's analog video output to a monitor. 2. Set the mode switch (IP setup mode) to SETUP. 3. Press MENU button. 4. Press RESET button. 5. Release RESET button. 6. Release MENU button entering the menu system. 7. Follow the Menu displayed on the analog monitor to setup IP address. Chapter Setup IP Address After entering PIH-036/038IP menu system, analog monitor displays: MODEL NETWORK SETUP IR CUT SETUP RESET DEFAULT EXIT To setup IP address, press SET button at NETWORK SETUP menu item. MAC ADDRESS IPADDRESS PORT SUBNET MASK GATEWAY To setup IP address, HTTP port number, subnet mask, and gateway. Use the following buttons: 1. SELECT button move cursor. 2. SET button enter submenu or set a digit. 3. MENU button finish setup and return to main menu. After finish IP address, subnet mask, and gateway, set the mode switch to Live monitoring mode. Press RESET button for rebooting. 8

11 Chapter 5-3. Configure IP Address Using HTML Page To change IP address using HTML page, please first type the default IP address, in Internet browser and follow steps below: 1. Logon PIH-036/038IP using default username and password "admin" and "pass". 2. Click on "Configure" hyper link. 3. Click on Network General hyper link. 4. Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection port. 5. Click on Submit button. Chapter 5-4. Internet Browser Setting & Software Component Required Make sure that your Internet Browser allows signed ActiveX plug-in running on your PC. Set "Download Signed ActiveX plug-in controls" to "Prompt" and "Run ActiveX control and plug-in" to "Enable" at Internet Explorer Tools Options Security Settings. After finishing above security settings, accrssing PIH-036/038IP's live video by default IP address of PIH-036/038IP using Internet Explorer will prompt a Security Warning dialog box. Click on OK Button to download the ActiveX directly from PIH-036/038IP. 9

12 Chapter 5-5. Advance Network Port Forwarding Technology Port forwarding technology is an advanced network technology which is wildly used for using one global IP shared by many network devices. The network architecture is illustrated as below. Port 80 of the router ( ) is assigned to the device IP address, Port 81 of the router is assigned to the device IP address, When Remote PC accesses the router's port 81 ( :81), it eventually accesses the video server at Internet IP : IP : Router's global IP : Port Port Chapter 5-6. Advance Network DDNS and PPPoE Technologies The advantage of using DDNS and PPPoE is to save the expense of IP address. PIH-036/038IP's PPPoE service gets a dynamic global IP address after system reboot. This IP address may get changed periodically. This is the address needed to access the video server over Internet. When ISP re-assigns a new IP address to PIH-036/038IP, PIH-036/038IP notifies DDNS service. A remote PC can access PIH-036/038IP by typing domain name in a browser. The domain name gets resolved by DDNS service and gets translated to its dynamic global IP address. The dynamic global IP address can now be accessed by the remote PC. Remote PC 4. Access PIH-036/038IP using the dynamic global. DDNS Server 5. Resolve domain name to IP address and sent back to remote PC. Internet ISP 2. ISP assigns global IP to PIH-036/038IP 1. Get IP address from ISP after reboot. 3. Notify DDNS server for the new IP address if PIH-036/038IP gets reboot or assigned a new IP address. 10

13 Chapter 5-7. Reset Default To reset manufacturing default, please first follow: 1. Connect PIH-036/038IP's analog output to a monitor. 2. Set the mode switch (IP setup mode) to SETUP. 3. Press MENU button. 4. Press RESET button. 5. Release RESET button. 6. Release MENU button entering the menu system. Select Reset Default menu item and press Set button. In the prompt menu, select Yes option to reset manufacturing default. Note : In case of forgetting password, Reset Default feature can restore the manufacturing default password. Chapter 5-8. IR-CUT Activation To activate IR-CUT feature using pushbutton key, please follow the steps below: 1. Connect PIH-036/038IP's analog output to a monitor. 2. Set the mode switch (IP setup mode) to SETUP. 3. Press MENU button. 4. Press RESET button. 5. Release RESET button. 6. Release MENU button entering the menu system. 7. Press SET button and choose IR CUT SETUP. 8. Press SET again to choose one of the following items. a. AUTO Auto switch. b. IN IR-CUT off. c. OUT IR-CUT on. d. SCHEDULE Schedule activation. 9. When choosing SCHEULE mode, please define day and night activation time. DAY TO NIGHT Day to night activation time. NIGHT TO DAY Night to day activation time. 11

14 Chapter 6. Live Monitoring Chapter 6-1. Login There are two levels of user authentication including administrator and guest for accessing PIH-036/038IP. The only difference is that administrator can configure system settings. Guest can only view live video. The default settings of username and password are described as follows: Username Password Administrator admin pass Guest guest guest To logon PIH-036/038IP, please type username and password in logon HTML page and click on Submit button to enter the system. Chapter 6-2. Menu Systems To use PIH-036/038IP's menu systems, please right click on video box (ActiveX control). A menu with three menu items gets pop up. A user can adjust video property, perform video record, and zoom the video source via the menu systems. 12

15 Chapter Video Property A user can change a video property at local PC. To change a video property, please click on Video Property menu item. There are six properties that a user can change. Changing video properties does not change server's settings. In stead, the changes only affect the video ActiveX control of the user's PC. Chapter Recording To record PC AVI file, please click on Recording menu item. An AVI Capturing dialog box shows up. A user can specify the AVI recording path in the Save As edit box. Click on Start button. Live video can be captured and saved into local PC. Click on Stop button to stop the recording operation. Chapter Zoom To zoom the video ActiveX control, please select Zoom menu item. Please perform mousedragging operation. The mouse-dragging area gets zoomed. To disable, please right click on the video ActiveX control and select on Zoom menu item again to restore original view area. 13

16 Chapter 7. Start Using PIH-036/038IP Network Features After login PIH-036/038IP as administrator, there are two main features system operation and configuration. Operation and configuration features are described as follows: Chapter 7-1. PIH-036/038IP Operational HTML Page PIH-036/038IP operational HTML page layout contains: Videosize Baseondifferentnetworkbandwidth,ausercanchangethetransmittedvideosizefromsmall (QCIF)tolarge(VGA). Configurehyperlink ConfigurationHTMLpage. Editabledevicename DeviceNamefieldisforuserstoidentifydevice'snameviawebinterfaceandIPScanutility. Extratextstamp VideoActiveXControl VideoActiveXcontrolisasoftwarecomponentdisplayingvideostreamingembeddedinsidean HTMLpage. Timer PIH-036/038IP'stimersystem. Framestatistics Framesizeandframerate. Onlinestatus NumberofpersoniscurrentlyaccessingPIH-036/038IP. 14

17 Note : PIH-036/038IP's video ActiveX has digital authentication code signed. PIH-036/038IP's video ActiveX can be automatically downloaded to a user's PC when the user logon to PIH-036/038IP for first time. Internet Browser should be configured to allow ActiveX plug-in run on the user's PC. Chapter 7-2. PIH-036/038IP Configuration PIH-036/038IP's administrator can configure PIH-036/038IP via standard HTML web page. There are basically five system categories including server, network, motion, audio, and video settings. This chapter explains the detail of each system setting. Chapter Server Settings Server settings contain PIH-036/038IP server's system information such as MAC address, firmware version, users, system timer, and other system settings. To change or to use the information, please follow the instructions at this section. Chapter General Network Settings Firmware Version Firmware update allows a user to upgrade PIH-036/038IP's firmware remotely. A user can use firmware version to verify that if the device has the latest update. Device Name The device name can be used by IPScan utility to identify the PIH-036/038IP the device name, enter the name for PIH-036/038IP and click on Submit button. To change Language Language setting can be changed dynamically. Chapter User Settings To change account name, please type new account name in Account edit box. To change new password, please type the new password in the New Password edit box. Click on Submit button to update the user settings. 15

18 Chapter Timer PIH-036/038IP allows a user to change system timer via standard HTML web page. To change PIH-036/038IP's system timer, please enter the date and time in the edit boxes. Click on Submit button to apply this operation. Network Time Protocol To synchronize time, check Auto Synchronize option to Every Hour. PIH-036/038IP synchronizes its system timer with a time server every hour. Note : Network Time Protocol feature requires Internet connection. Chapter System Setting Load Default feature allow to load manufacturing default. There are certain critical settings such as IP addresses and video system which do not be affected by this feature. To reboot PIH-036/038IP click on Reboot System hyper link. 16

19 To update firmware of PIH-036/038IP, please click on Firmware Update hyper link. Locate "flash036.bin" in your computer by click Browse button. Click Submit to finish firmware upgrade. To ensure the quality of transmission, please make sure that there is no user accessing PIH-036/038IP during firmware upgrade. Firewall Setup can enable the Denial of Service to block ICMP Ping attacks from Internet (DoS). Chapter 7-3. Network PIH-036/038IP provides many Internet protocols such as IP, DHCP, PPPoE, and DDNS. A user can configure these Internet protocol settings. To setup above, please read the following sections. Chapter General Settings Network general settings are the basic settings connecting PIH-036/038IP to the network. The default IP Address of PIH-036/038IP is A user can use this IP address to verify the network connection between a local PC and PIH-036/038IP using Internet Browser. For Internet access configuration, please contact your local ISP for global IP address. Once the physical Internet connection gets installed, enter IP address (global), Subnet Mask, and Gateway IP from the ISP. 17

20 1. DNS1 IP Address First Domain Name Server, the IP address of the domain name server. 2. DNS2 IP Address Second Domain Name Server, the IP address of the domain name server, a backup DNS server for DNS1. 3. HTTP Connection Port Advanced networking setting, in general, this network option allows multiple devices share one IP address. Port forwarding, network address translation (NAT), and other network technologies can utilize this option. Please refer a router's instruction manual or consult network administrator for detail. Chapter DHCP Setting Router, gateway, or other software DHCP servers can dynamically assign an IP address to PIH-036/038IP. There is no need to configure IP address, subnet mask, and gateway. Since the DHCP may assign a different IP address to PIH-036/038IP after power off, a user can use IPScan utility to launch Internet browser for searching PIH-036/038IP. To enable DHCP, click on DHCP option and click on Submit button. Note : Once the DHCP option gets enable, PIH-036/038IP uses IP address from DHCP server instead of the IP address assigned by IP Settings. This feature allows only in LAN. Chapter PPPoE Settings Point-to-Point Protocol over Ethernet (PPPoE) is an Internet protocol that is capable of receiving dynamic global (static) IP address from an ISP. This protocol allows to switch to another global IP address to maintain the Internet connection due to expiration of an global IP address based on ISP's IP distribution's policy. Primary purpose of adopting PPPoE can avoid the fee of leasing global IP address. Please consult your local ISP for this service. To use PPPoE, please provide account and password information for the service. Chapter DDNS Settings DNS stands for domain name server, which provides domain name translation service for a device's IP. Basically, domain name is easier to remember than numeric values (IP). DNS service requires service registration and subscription. DynDNS (DDNS) provides domain name service without subscription. Please logon and register for the service. To use DDNS, please enter DDNS server, account ID, and password to logon to the server. Click on Submit button to perform the task. The DDNS message box shows the connection status sent by DynDNS server, after PIH-036/038IP establishes network connection with DDNS Server. 18

21 Note : DDNS feature requires Internet connection. Chapter 7-4. Alarm Settings PIH-036/038IP's hardware alarm system contains motion/alarm detection notification features. Many alarm features such as motion notification and FTP archiving can be found at this section. Chapter Motion Setup There are two independent detection zone allowed in PIH-036/038IP. A user can enable the detection zones with different sensitivities ranging from 0 to 15 (highest to lowest) for motion detection. Once a suspicious motion activity gets triggered, PIH-036/038IP can start to capture one JPEG snapshot on various recording medimums. 19

22 Motion options are described as follows: Motion Detection Enable Enable motion detection zone. Sensitivity 0 to 15 (highest to lowest). Shutter Time Motion detection interval. Motion Notification For sending an notification, please specify the following network information. The snapshot gets sent as in the attachment. Mail Server IP/Host Name IP address or host name of the destination server. Mail Sender The sender's address. Mail Recipient The recipient's address. Motion FTP For sending snapshots to FTP server, please specify the following network information. Motion snapshots can be transferred to the FTP server. FTP Server IP/Host Name The destination IP address/host name of the FTP server. Login Account Account name of the FTP server. Login Password Account password of the FTP server. Chapter Motion Area Once above information gets set, please configure the motion area of the monitored environment. To configure motion area, right mouse click on the video area for menu system. Please selection detection area in menu item. Perform mouse-drag on the video to define the motion area. Motion Counter Motion detection can be applies to many applications, for examples, counting people entering a department store or counting vehicles driving through a high way. User can unilize this page for motion statistics. To reset the counter, click on Reset Counter button. To get the statistics, click on Refresh Counter. 20

23 Chapter 7-5. Video Settings Chapter Text Stamp Specific overlay text information can be displayed on video ActiveX. To show the overlay text information on the ActiveX, please enter text on Display Text field. The position is adjustable by given x and y. Click Submit button to update above settings. Chapter Video There are three video quality levels that a user can set for PIH-036/038IP. Basically, better video quality setting a user can get better video image. However, if the bandwidth is a concern, please lower the video quality setting. Chapter IR Cut Removable IR Cut removable allows to schedule IR activation by (1) auto, (2) in, (3) out, or (4) schedule. When the setting is set to "Auto", IR activation is determined by the light sensor. "In" setting means that the IR cut feature is removed. "Out" setting means that the IR cut feature is forced to be always on. When activation schedule is enabled, IR cut feature can be scheduled based on a specific time frame. For example, a user can set the IR cut activation time starting from 19:00 pm (day to night time) until 6:00 am (night day time). 21

24 Chapter 8. Specifications Chapter 8-1. Lens Angle of view Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Minimum Illumination Camera STANDARD RESOLUTION D/N VARI-FOCAL IP IR CAMERA Model No. PIH-0364XW IP PIH-0364XS IP PIH-0368XW IP PIH-0368XS IP Focal Length 3.3 ~ 12mm 9 ~ 22mm 3.3 ~ 12mm 9 ~ 22mm Iris F1.4 S/N Ratio Auto Gain Control Aperture Correction Power Consumption Back Light Compensation Operating Temperature Gamma Characteristic IP Rating Window H V D Peak Wavelength Infrared Beam Spread LED Radiant Distance Dimension Weight AC24V ( 10%) Design and specifications are subject to change without notice ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 16.3 NTSC or PAL Internal 1/3" Exview HAD CCD Sensor 510(H) x 492(V) [NTSC] 500(H) x 582(V) [PAL] 6.00mm(H) x 4.96mm(V) KHz / 59.94Hz [NTSC] KHz / 50Hz [PAL] 2:1 Interlace Color: 0.02Lux at F1.4, 0Lux with IR Mono: 0.005Lux at F1.4 More Then 50dB (AGC-OFF) 36dB Variable Gain Horizontal, Vertical 17W Auto -10 ~ +50 (14 ~ 122 ) =0.45 IP66 AC90~260V 78 Heat Resistant Glass 850nm 30 50M 60M 50M 60M Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L) 2200g 22

25 Model No. Lens Focal Length Iris Angle of view Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Minimum Illumination S/N Ratio Auto Gain Control Aperture Correction Power Consumption Back Light Compensation Operating Temperature Gamma Characteristic IP Rating Window H V D Peak Wavelength Infrared Beam Spread LED Radiant Distance Dimension Weight HIGH RESOLUTION D/N VARI-FOCAL IP IR CAMERA PIH-0384XW IP PIH-0384XS IP PIH-0388XW IP PIH-0388XS IP 3.3 ~ 12mm 9 ~ 22mm 3.3 ~ 12mm 9 ~ 22mm F1.4 AC24V ( 10%) Design and specifications are subject to change without notice ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 16.3 NTSC or PAL Internal 1/3" Super HAD CCD Sensor 768(H) x 494(V) [NTSC] 752(H) x 582(V) [PAL] 5.59mm(H) x 4.68mm(V) KHz / 59.94Hz [NTSC] KHz / 50Hz [PAL] 2:1 Interlace Color: 0.05Lux at F1.4, 0Lux with IR Mono: 0.01Lux at F1.4 More Then 50dB (AGC-OFF) 36dB Variable Gain Horizontal, Vertical 17W Auto -10 ~ +50 (14 ~ 122 ) =0.45 IP66 78 Heat Resistant Glass AC90~260V 850nm 30 50M 60M 50M 60M Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L) 2200g 23

26 STANDARD RESOLUTION D/N VARI-FOCAL IP IR CAMERA Model No. PIH-0364XW IPH PIH-0364XS IPH PIH-0368XW IPH PIH-0368XS IPH Focal Length 3.3 ~ 12mm 9 ~ 22mm 3.3 ~ 12mm 9 ~ 22mm Iris F1.4 Lens Angle of view Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Minimum Illumination S/N Ratio Auto Gain Control Aperture Correction Power Consumption Back Light Compensation Operating Temperature Gamma Characteristic IP Rating Window Heater Control H V D 89.8 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 16.3 AC24V ( 10%) NTSC or PAL Internal 1/3" Exview HAD CCD Sensor 510(H) x 492(V) [NTSC] 500(H) x 582(V) [PAL] 6.00mm(H) x 4.96mm(V) KHz / 59.94Hz [NTSC] KHz / 50Hz [PAL] 2:1 Interlace Color: 0.02Lux at F1.4, 0Lux with IR Mono: 0.005Lux at F1.4 More Then 50dB (AGC-OFF) 36dB Variable Gain Horizontal, Vertical 26W Auto -10 ~ +50 (14 ~ 122 ) =0.45 IP66 78 Heat Resistant Glass On: 15 (59 ), Off: 25 (77 ) AC90~260V Peak Wavelength 850nm Infrared Beam Spread 30 LED Radiant Distance 50M 60M 50M 60M Dimension Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L) Weight 2200g Design and specifications are subject to change without notice. 24

27 Model No. Lens Focal Length Iris Angle of view Power Input Voltage System Sync. Mode Pick Up Element Effective Pixels Chip Size Horizontal & Vertical Sync. Frequency Scanning System Minimum Illumination S/N Ratio Auto Gain Control Aperture Correction Power Consumption Back Light Compensation Operating Temperature Gamma Characteristic IP Rating Window HIGH RESOLUTION D/N VARI-FOCAL IP IR CAMERA PIH-0384XW IPH PIH-0384XS IPH PIH-0388XW IPH PIH-0388XS IPH 3.3 ~ 12mm 9 ~ 22mm 3.3 ~ 12mm 9 ~ 22mm F1.4 H V D 89.8 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 16.3 AC24V ( 10%) NTSC or PAL Internal 1/3" Super HAD CCD Sensor 768(H) x 494(V) [NTSC] 752(H) x 582(V) [PAL] 5.59mm(H) x 4.68mm(V) KHz / 59.94Hz [NTSC] KHz / 50Hz [PAL] 2:1 Interlace Color: 0.05Lux at F1.4, 0Lux with IR Mono: 0.01Lux at F1.4 More Then 50dB (AGC-OFF) 36dB Variable Gain Horizontal, Vertical 26W Auto -10 ~ +50 (14 ~ 122 ) =0.45 Peak Wavelength 850nm Infrared Beam Spread 30 LED Radiant Distance 50M 60M 50M 60M Dimension Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L) Weight 2200g Design and specifications are subject to change without notice. IP66 78 Heat Resistant Glass Heater Control On: 15 (59 ), Off: 25 (77 ) AC90~260V 25

28 Chapter 8-2. IP System CPU 16 Bits CPU Hardware Image compression Video adjustment Video quality Resolution Network throughput Motion detection Motion notification Basic Protocols Advanced IP Setup Software Upgrade Security Recording AVI File Exporting Frame Statistics User Logon Statistics Built-in Language IR Cut Removal 3G Mobile Phone SDK OS Supported Browsers Supported Complimentary Software Memory 1M Bytes Flash ROM 8M Bytes SDRAM One RJ-45 To Internet One BNC Video Output, CVBS 1.0Vp-p, 75ohm JPEG / Motion JPEG Brightness, Contrast, Hue, Saturation, Rotation, AWB Three video quality adjustable VGA 640*480 CIF(default) 320*240 QCIF 160*120 Up to 30 fps for QCIF, 15 fps for CIF, 10 fps for VGA Two motion detection zones Via FTP or TCP/IP, ICMP, HTTP ARP, DHCP, DNS, DDNS, SMTP, FTP, PPPoE, NTP web page, IPScan software, and built-in pushbutton key control HTML direct update Two-layer password protection: Admin and Guest PC AVI recording ActiveX converts JPEG to AVI Frame rate and frame size Yes English & Chinese Auto, In, Out, and Schedule Java phone with MIDP 2.0 support Yes (included in product CD) Windows 2000, Windows XP Windows Internet Explorer 5.x or later IPScan utility (included in product CD), ActiveX (automatic downloaded), NVR Software 2.0 (included in product CD) Design and specifications are subject to change without notice CSE-2 26

29 MERIT LILIN ENT. CO., LTD CSE