Informatica PowerExchange for SAP NetWeaver (Version 10.2)

Transcription

1 Informatica PowerExchange for SAP NetWeaver (Version 10.2) SAP BW Metadata Creation Solution

2 Informatica PowerExchange for SAP NetWeaver BW Metadata Creation Solution Version 10.2 September 2017 Copyright Informatica LLC 1998, 2017 This software and documentation are provided only under a separate license agreement containing restrictions on use and disclosure. No part of this document may be reproduced or transmitted in any form, by any means (electronic, photocopying, recording or otherwise) without prior consent of Informatica LLC. Informatica, the Informatica logo, PowerExchange, and Big Data Management are trademarks or registered trademarks of Informatica LLC in the United States and many jurisdictions throughout the world. A current list of Informatica trademarks is available on the web at Other company and product names may be trade names or trademarks of their respective owners. U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation is subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR , Commercial Computer Software License. Portions of this software and/or documentation are subject to copyright held by third parties, including without limitation: Copyright DataDirect Technologies. All rights reserved. Copyright Sun Microsystems. All rights reserved. Copyright RSA Security Inc. All Rights Reserved. Copyright Ordinal Technology Corp. All rights reserved. Copyright Aandacht c.v. All rights reserved. Copyright Genivia, Inc. All rights reserved. Copyright Isomorphic Software. All rights reserved. Copyright Meta Integration Technology, Inc. All rights reserved. Copyright Intalio. All rights reserved. Copyright Oracle. All rights reserved. Copyright Adobe Systems Incorporated. All rights reserved. Copyright DataArt, Inc. All rights reserved. Copyright ComponentSource. All rights reserved. Copyright Microsoft Corporation. All rights reserved. Copyright Rogue Wave Software, Inc. All rights reserved. Copyright Teradata Corporation. All rights reserved. Copyright Yahoo! Inc. All rights reserved. Copyright Glyph & Cog, LLC. All rights reserved. Copyright Thinkmap, Inc. All rights reserved. Copyright Clearpace Software Limited. All rights reserved. Copyright Information Builders, Inc. All rights reserved. Copyright OSS Nokalva, Inc. All rights reserved. Copyright Edifecs, Inc. All rights reserved. Copyright Cleo Communications, Inc. All rights reserved. Copyright International Organization for Standardization All rights reserved. Copyright ejtechnologies GmbH. All rights reserved. Copyright Jaspersoft Corporation. All rights reserved. Copyright International Business Machines Corporation. All rights reserved. Copyright yworks GmbH. All rights reserved. Copyright Lucent Technologies. All rights reserved. Copyright University of Toronto. All rights reserved. Copyright Daniel Veillard. All rights reserved. Copyright Unicode, Inc. Copyright IBM Corp. All rights reserved. Copyright MicroQuill Software Publishing, Inc. All rights reserved. Copyright PassMark Software Pty Ltd. All rights reserved. Copyright LogiXML, Inc. All rights reserved. Copyright Lorenzi Davide, All rights reserved. Copyright Red Hat, Inc. All rights reserved. Copyright The Board of Trustees of the Leland Stanford Junior University. All rights reserved. Copyright EMC Corporation. All rights reserved. Copyright Flexera Software. All rights reserved. Copyright Jinfonet Software. All rights reserved. Copyright Apple Inc. All rights reserved. Copyright Telerik Inc. All rights reserved. Copyright BEA Systems. All rights reserved. Copyright PDFlib GmbH. All rights reserved. Copyright Orientation in Objects GmbH. All rights reserved. Copyright Tanuki Software, Ltd. All rights reserved. Copyright Ricebridge. All rights reserved. Copyright Sencha, Inc. All rights reserved. Copyright Scalable Systems, Inc. All rights reserved. Copyright jqwidgets. All rights reserved. Copyright Tableau Software, Inc. All rights reserved. Copyright MaxMind, Inc. All Rights Reserved. Copyright TMate Software s.r.o. All rights reserved. Copyright MapR Technologies Inc. All rights reserved. Copyright Amazon Corporate LLC. All rights reserved. Copyright Highsoft. All rights reserved. Copyright Python Software Foundation. All rights reserved. Copyright BeOpen.com. All rights reserved. Copyright CNRI. All rights reserved. This product includes software developed by the Apache Software Foundation ( and/or other software which is licensed under various versions of the Apache License (the "License"). You may obtain a copy of these Licenses at Unless required by applicable law or agreed to in writing, software distributed under these Licenses is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF 2 PWX-SPS

3 ANY KIND, either express or implied. See the Licenses for the specific language governing permissions and limitations under the Licenses. This product includes software which was developed by Mozilla ( software copyright The JBoss Group, LLC, all rights reserved; software copyright by Bruno Lowagie and Paulo Soares and other software which is licensed under various versions of the GNU Lesser General Public License Agreement, which may be found at The materials are provided free of charge by Informatica, "as-is", without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. The product includes ACE(TM) and TAO(TM) software copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt University, Copyright ( ) , all rights reserved. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (copyright The OpenSSL Project. All Rights Reserved) and redistribution of this software is subject to terms available at and This product includes Curl software which is Copyright , Daniel Stenberg, <daniel@haxx.se>. All Rights Reserved. Permissions and limitations regarding this software are subject to terms available at Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. The product includes software copyright ( ) MetaStuff, Ltd. All Rights Reserved. Permissions and limitations regarding this software are subject to terms available at license.html. The product includes software copyright , The Dojo Foundation. All Rights Reserved. Permissions and limitations regarding this software are subject to terms available at This product includes ICU software which is copyright International Business Machines Corporation and others. All rights reserved. Permissions and limitations regarding this software are subject to terms available at This product includes software copyright Per Bothner. All rights reserved. Your right to use such materials is set forth in the license which may be found at kawa/software-license.html. This product includes OSSP UUID software which is Copyright 2002 Ralf S. Engelschall, Copyright 2002 The OSSP Project Copyright 2002 Cable & Wireless Deutschland. Permissions and limitations regarding this software are subject to terms available at This product includes software developed by Boost ( or under the Boost software license. Permissions and limitations regarding this software are subject to terms available at / This product includes software copyright University of Cambridge. Permissions and limitations regarding this software are subject to terms available at This product includes software copyright 2007 The Eclipse Foundation. All Rights Reserved. Permissions and limitations regarding this software are subject to terms available at and at This product includes software licensed under the terms at license.html, license.html, license-agreement; PWX-SPS

4 current/doc/mitk5license.html; and This product includes software licensed under the Academic Free License ( 3.0.php), the Common Development and Distribution License ( the Common Public License ( the Sun Binary Code License Agreement Supplemental License Terms, the BSD License ( the new BSD License ( the MIT License ( the Artistic License ( and the Initial Developer s Public License Version 1.0 ( This product includes software copyright Joe WaInes, XStream Committers. All rights reserved. Permissions and limitations regarding this software are subject to terms available at This product includes software developed by the Indiana University Extreme! Lab. For further information please visit This product includes software Copyright (c) 2013 Frank Balluffi and Markus Moeller. All rights reserved. Permissions and limitations regarding this software are subject to terms of the MIT license. See patents at DISCLAIMER: Informatica LLC provides this documentation "as is" without warranty of any kind, either express or implied, including, but not limited to, the implied warranties of noninfringement, merchantability, or use for a particular purpose. Informatica LLC does not warrant that this software or documentation is error free. The information provided in this software or documentation may include technical inaccuracies or typographical errors. The information in this software and documentation is subject to change at any time without notice. NOTICES This Informatica product (the "Software") includes certain drivers (the "DataDirect Drivers") from DataDirect Technologies, an operating company of Progress Software Corporation ("DataDirect") which are subject to the following terms and conditions:1. 1. THE DATADIRECT DRIVERS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT IN NO EVENT WILL DATADIRECT OR ITS THIRD PARTY SUPPLIERS BE LIABLE TO THE END-USER CUSTOMER FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR OTHER 4 PWX-SPS

5 DAMAGES ARISING OUT OF THE USE OF THE ODBC DRIVERS, WHETHER OR NOT INFORMED OF THE POSSIBILITIES OF DAMAGES IN ADVANCE. THESE LIMITATIONS APPLY TO ALL CAUSES OF ACTION, INCLUDING, WITHOUT LIMITATION, BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. The information in this documentation is subject to change without notice. If you find any problems in this documentation, please report them to us in writing at Informatica LLC 2100 Seaport Blvd. Redwood City, CA Informatica products are warranted according to the terms and conditions of the agreements under which they are provided. INFORMATICA PROVIDES THE INFORMATION IN THIS DOCUMENT "AS IS" WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OR CONDITION OF NON-INFRINGEMENT. Part Number: PWX-SPS 5 PWX-SPS

6 Table of Contents SAP BW Metadata Creation Solution Overview... 7 Upgrade Note... 7 The mappings Folder... 7 The workflows Folder... 7 The SrcAndParamFiles Folder... 8 Requirements to Create SAP BW Metadata... 8 Importing the Mappings... 8 Importing the Workflows... 8 Creating and Exporting a Target Table... 8 Running a Workflow to Create an InfoObject... 9 Configuring Mapping Parameters and Connection Variables for the BAPI_IOBJ_CREATE_ACTIVATE Mapping... 9 Running a Workflow to Create an InfoSource for Master Data Creating the InfoObjects Configuring Mapping Parameters and Connection Variables for the BAPI_ISOURCE_MD_CREATE_ACTIVATE Mapping Running a Workflow to Create an InfoSource for Transaction Data Creating the InfoObjects Configuring Mapping Parameters and Connection Variables for the BAPI_ISOURCE_TD_CREATE_ACTIVATE Mapping Running a Workflow to Create an InfoPackage Configuring InfoPackage Metadata in BAPI_IPAK_CREATE_SI.txt Configuring Connection Variable for the s_bapi_ipak_create Session Running a Workflow to Start an InfoPackage Specifying InfoPackage Technical Name in INFOPACKAGE_NAME.txt Configuring Connection Variable for the s_bapi_ipak_start Session Configuring the 3 rd Party Selection Tab for the InfoPackage in SAP BW PWX-SPS

7 SAP BW Metadata Creation Solution Overview You can use the SAP BW metadata creation solution to create InfoSources, InfoObjects, and InfoPackages and start InfoPackages. To create objects in SAP BW, open the sapsolutions/bw/metadata folder on the Informatica platform installation DVD. It contains the following subfolders: Mappings Workflows SrcAndParamFiles The mappings and workflows folders contain XML files that you can import as mappings and workflows into the PowerCenter repository. Upgrade Note When you configure the PowerCenter Integration Service, set OutputMetaDataForFF to No so that the Integration Service does not output metadata for flat file targets. The mappings Folder The mappings folder includes mappings to create objects in SAP BW. The following table lists the mappings included with the SAP BW metadata creation solution: Mapping BAPI_IOBJ_CREATE_ACTIVATE.XML BAPI_ISOURCE_MD_CREATE_ACTIVATE.XML BAPI_ISOURCE_TD_CREATE_ACTIVATE.XML BAPI_IPAK_CREATE.XML BAPI_IPAK_START.XML The workflows Folder Creates and activates an InfoObject. Creates and activates an InfoSource for master data. Creates and activates an InfoSource for transaction data. Creates an InfoPackage. Starts an InfoPackage. The workflows folder includes workflows to create objects in SAP BW. The following table lists the workflows included with the SAP BW metadata creation solution: Workflow INFOOBJECT_CREATE_ACTIVATE.XML INFOSOURCE_MD_CREATE_ACTIVATE.XML INFOSOURCE_TD_CREATE_ACTIVATE.XML INFOPACKAGE_CREATE.XML Creates and activates an InfoObject. This workflow uses the BAPI_IOBJ_CREATE_ACTIVATE mapping to create the InfoObject. Creates and activates an InfoSource for master data. This workflow uses the BAPI_ISOURCE_MD_CREATE_ACTIVATE mapping to create the InfoSource. Creates and activates an InfoSource for transaction data. This workflow uses the BAPI_ISOURCE_TD_CREATE_ACTIVATE mapping to create the InfoSource. Creates an InfoPackage. This workflow uses the BAPI_IPAK_CREATE mapping to create the InfoPackage. 7 PWX-SPS

8 Workflow INFOPACKAGE_START.XML Starts an InfoPackage. This workflow uses the BAPI_IPAK_START mapping to start the InfoPackage. The SrcAndParamFiles Folder The SrcAndParamFiles folder includes support files that you use to create SAP BW metadata. These include parameter files and sample files that you use during a workflow to create SAP BW metadata. The following table lists the files included with the SAP BW metadata creation solution: File INFA_SAPBW_OBJECT_MANAGEMENT.prm BW_TABLE_METADATA.XML BAPI_IPAK_CREATE_SI.txt INFOPACKAGE_NAME.txt TriggerRow.txt Requirements to Create SAP BW Metadata Set the values for mapping parameters and connection variables you use in the SAP BW metadata creation mappings and session tasks before running a workflow. Use this file for every workflow run and set the corresponding session tasks variables in each workflow. Sample XML source file to which you export a target table. Use to specify the metadata for the InfoPackage you want to create in SAP BW. Configure this file before running the INFOPACKAGE_CREATE workflow. Use to specify the technical name of the InfoPackage you want to start. Configure this file before running the INFOPACKAGE_START workflow. The INFOSOURCE_MD_CREATE_ACTIVATE and INFOSOURCE_TD_CREATE_ACTIVATE workflows use this file to start the workflow. Do not modify this file. Before running workflows to create SAP BW metadata, complete the following tasks: Import the mappings. Import the workflows. Create a SAP BAPI/RFC connection and export the target as an XML file. Importing the Mappings Import the mappings from the sapsolutions\bw\metadata\mappings directory on the Informatica platform installation DVD into a new folder in the PowerCenter repository. Note: If you import a mapping into a folder that contains objects that exist in the mapping, the Designer prompts you to rename, replace, reuse, or compare the objects. Select Rename to rename the mapping. Importing the Workflows Import the workflows from the sapsolutions\bw\metadata\workflows directory on the Informatica platform installation DVD into a folder in the PowerCenter repository. Import the mappings before importing the workflows. You must import the workflows into the same folder as the mappings. Creating and Exporting a Target Table To create an InfoObject or InfoSource in SAP BW, create a target definition. The target definition defines the metadata for the InfoSource you want to create in SAP BW. Each column you create defines the metadata for an InfoObject you want to create in SAP BW. If you specify an InfoSource or InfoObject that already exists in SAP BW, the Integration Service does not replace or update the metadata for the InfoSource or InfoObject in SAP BW. After you define an 8 PWX-SPS

9 InfoSource or InfoObject you want to create in SAP BW, export the table to an XML file in the SrcFiles directory in the Informatica Services installation. The sapsolutions\bw\metadata\srcandparamfiles folder on the Informatica platform installation DVD includes a sample exported XML file called BW_TABLE_METADATA.XML. Running a Workflow to Create an InfoObject To create and activate an InfoObject, run the INFOOBJECT_CREATE_ACTIVATE workflow. Before you run the workflow, complete the following configuration tasks: Edit the BW_TABLE_METADATA.XML file to configure the metadata for InfoObjects. Configure the connection and mapping variables for the s_bapi_iobj_create_activate session in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Configuring Mapping Parameters and Connection Variables for the BAPI_IOBJ_CREATE_ACTIVATE Mapping After you specify the exported table name, configure the mapping parameters for the BAPI_IOBJ_CREATE_ACTIVATE mapping. The mapping parameters for the BAPI_IOBJ_CREATE_ACTIVATE mapping specify the metadata for the InfoObject. Configure the mapping parameters in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Place the copy of the parameter file in server\bin in the Informatica Services installation directory. You can place the file in another directory if you specify the file name and directory in the workflow or session properties. The following table lists the mapping parameters and connection variables you configure in INFA_SAPBW_OBJECT_MANAGEMENT.prm to create and activate an InfoObject: Mapping Parameter / Connection Variable [s_bapi_iobj_create_activate] $AppConnection_BW_RFC= $$ATTRIBUTEFLAG=X $$TXTTABFL=X $$TEXT_SHORT_FLAG=X $$TEXT_MEDIUM_FLAG=X $$TEXT_LONG_FLAG=X $$FIXCUKY=USD $$FIXUNIT=LB $$INFOAREA= $$APPLICATIONNAME= Required. Session task name. Do not change this entry. Required. BAPI/RFC connection name. Define an SAP BAPI/RFC connection object and enter the name here. Optional. Attribute flag that enables the Attribute Only option for the InfoObject. Enter X to enable or enter a null value to disable. Default is X. Optional. Text table flag that enables the With texts option for the InfoObject. Enter X to enable or enter a null value to disable. Default is X. Optional. Text short flag that enables the Short Text Exists option for the InfoObject. Enter X to enable or a enter value to disable. Default is X. Optional. Text medium flag that enables the Medium Text Exists option for the InfoObject. Enter X to enable or enter a null value to disable. Default is X. Optional. Text long flag that enables the Long Text Exists option for the InfoObject. Enter X to enable or enter a null value to disable. Default is X. Optional. Fixed Currency. You can change the value to any valid currency. This property is only used while creating a Key Figure InfoObject of type Amount. Default is U.S. Dollar. Required. Fixed Unit of Measure. You can change the value to any valid unit of measure. This property is only used while creating a Key Figure InfoObject of type Quantity. Default is Pounds. Optional. InfoArea. The valid InfoArea name you enter here is copied to the InfoArea of the characteristic InfoObject. Optional. Application Component. The valid Application Component name you enter here is copied to the Application Component of the characteristic InfoObject. 9 PWX-SPS

10 Running a Workflow to Create an InfoSource for Master Data To create and activate an InfoSource for master data, run the INFOSOURCE_MD_CREATE_ACTIVATE workflow. Before you run the workflow, complete the following tasks: Create the InfoObjects you want to include in the InfoSource. Edit the BW_TABLE_METADATA.XML file to configure the metadata for InfoObjects. Configure the mapping parameters and connection variables for the s_bapi_isource_md_create_activate session in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Creating the InfoObjects Before you run the workflow to create an InfoSource for master data, create the InfoObjects you want to include in the InfoSource. You can include InfoObjects that you created using the SAP BW metadata creation solution. You can also use InfoObjects that you created in SAP BW. Configuring Mapping Parameters and Connection Variables for the BAPI_ISOURCE_MD_CREATE_ACTIVATE Mapping After you specify the exported table name, configure the mapping parameters for the BAPI_ISOURCE_MD_CREATE_ACTIVATE mapping. The mapping parameters specify the metadata for an InfoSource for master data. Configure the mapping parameters in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Place the copy of the parameter file in server\bin in the Informatica Services installation directory. You can place the file in another directory if you specify the file name and directory in the workflow or session properties. The following table lists the mapping parameters and connection variables you configure in INFA_SAPBW_OBJECT_MANAGEMENT.prm to create and activate an InfoSource for master data: Mapping Parameter / Connection Variable [s_bapi_isource_md_create_activate] $$AppConnection_BW_RFC= $$SOURCESYSTEM= $$INFOOBJECT= $$LOADMETHOD=T $$APPLICATIONNAME= $$DELTAUPDATE=X $$RELOADABLE= $$DELTAUPDATETEXT=X $$RELOADABLETEXT= Required. Session task name. Do not change this entry. Required. BAPI/RFC connection name. Define an SAP BAPI/RFC connection object and enter the name here. Required. Name of the source system to which the Master InfoSource will be assigned. Required. Name of primary InfoObject for the Master InfoSource. Enter the name of the InfoObject that is used as the primary InfoObject for the InfoSource. Optional. Load Method. Enter T for transactional RFC or I for IDoc. Default is T. Optional. Name of Application Component. When you specify this option, the Integration Service creates the Master InfoSource under the Application Component. Otherwise, the Integration Service creates it under Unassigned nodes. Optional. Delta Update. Enter X to enable or enter a null value to disable. Default is X. Optional. Reloading Data Request is Permitted. Enter X to enable or enter a null value to disable. Default is null value. Optional. Delta Update for Texts is Supported. Enter X to enable or enter a null value to disable. Default is X. Optional. Reloading Data Request for Texts is Permitted. Enter X to enable or enter a null value to disable. Default is null value. 10 PWX-SPS

11 Running a Workflow to Create an InfoSource for Transaction Data To create and activate an InfoSource for transaction data, run the INFOSOURCE_TD_CREATE_ACTIVATE workflow. Before you run the workflow, complete the following configuration tasks: Create the InfoObjects you want to include in the InfoSource. Edit the BW_TABLE_METADATA.XML file to configure the metadata for InfoObjects. Configure the mapping parameters and connection variables for the s_bapi_isource_td_create_activate session in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Creating the InfoObjects Before you run the workflow to create an InfoSource for master data, create the InfoObjects you want to include in the InfoSource. You can include InfoObjects that you created using the SAP BW metadata creation solution. You can also use InfoObjects that you created in SAP BW. Configuring Mapping Parameters and Connection Variables for the BAPI_ISOURCE_TD_CREATE_ACTIVATE Mapping After you specify the exported table name, configure the mapping parameters for the BAPI_ISOURCE_TD_CREATE_ACTIVATE mapping. The mapping parameters specify the metadata for an InfoSource for transaction data. You configure the mapping parameters in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Place the copy of the parameter file in server\bin in the Informatica Services installation directory. You can place the file in another directory if you specify the file name and directory in the workflow or session properties. The following table lists the mapping parameters and connection variables you configure in INFA_SAPBW_OBJECT_MANAGEMENT.prm to create and activate an InfoSource for transaction data: Mapping Parameter / Connection Variable [s_bapi_isource_td_create_activate] $$AppConnection_BW_RFC= $$SOURCESYSTEM= $$INFOSOURCE= $$LOADMETHOD=T $$FULLUPDATE=X $$DELTAUPDATE= $$RELOADABLE= Required. Session task name. Do not change this entry. Required. BAPI/RFC connection name. Define an SAP BAPI/RFC connection object and enter the name here. Required. Name of the source system to which the Master InfoSource will be assigned. Required. Name of the Transaction InfoSource to be created. Running a Workflow to Create an InfoPackage Optional. Load Method. Enter T for transactional RFC or I for IDoc. Default is T. Optional. Full update supported. Enter X to enable or enter a null value to disable. Default is X. Optional. Delta Update. Enter X to enable or enter a null value to disable. Default is a null value. Optional. Subsequent Claim of a Data Package Supported. Enter X to enable or enter a null value to disable. Default is a null value. To create an InfoPackage in SAP BW, run the INFOPACKAGE_CREATE workflow. Before you run the workflow, complete the following configuration tasks: Configure the InfoPackage metadata in BAPI_IPAK_CREATE_SI.txt. Configure the connection variable for the s_bapi_ipak_create session in INFA_SAPBW_OBJECT_MANAGEMENT.prm. 11 PWX-SPS

12 Configuring InfoPackage Metadata in BAPI_IPAK_CREATE_SI.txt In BAPI_IPAK_CREATE_SI.txt, configure the metadata for the InfoPackage. You can use the sample file in the sapsolutions\bw\metadata\srcandparamfiles directory on the Informatica platform installation DVD as a template to create a copy of the file. The sample file includes a header row of text that specifies the properties for the InfoPackage that you need to define in the file. Do not delete the header row at the beginning of the file. Use the header row as a template to configure the metadata for the InfoPackage you want to create. You can configure multiple InfoPackages in BAPI_IPAK_CREATE_SI.txt. Place the copy of BAPI_IPAK_CREATE_SI.txt in the SrcFiles directory in the Informatica Services installation. The following table lists each property in BAPI_IPAK_CREATE_SI.txt: Property InfoSource InfoSourceType LogSys DataSource DataSourceType UpdateMasterData Text UpdateMode_Read Required. Name of the InfoSource. Required. Type of InfoSource. Enter I for Transaction InfoSource. Enter O for Master InfoSource. Required. Technical name for the SourceSystem. Required. Technical name for the DataSource that is mapped on the InfoSource. Required. Technical type for the DataSource. Enter D for transaction DataSource. Enter M for master data attributes. Enter T for master text DataSource. Required. If master data exists for the data, this property indicates whether the system only loads data. Required. Text description of InfoPackage. Required. InfoPackage processing mode. Enter F for Full Update. Enter D for Delta Update. Enter R for Repeat Update. Enter C to initialize delta procedure. Enter I to construct initial count. Configuring Connection Variable for the s_bapi_ipak_create Session After configuring the InfoPackage metadata, configure the connection variable for the s_bapi_ipak_create session. The connection variable specifies the SAP BW connection to use to create the InfoPackage. Configure the connection variable in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Place the copy of the parameter file in server\bin in the Informatica Services installation directory. You can place the file in another directory if you specify the file name and directory in the workflow or session properties. The following table lists the connection variables you configure for the s_bapi_ipak_create session: Connection Variable [s_bapi_ipak_create] $$AppConnection_BW_R FC= Required. Session task name. Do not change this entry. Required. BAPI/RFC connection name. Define an SAP BAPI/RFC connection object and enter the name here. Running a Workflow to Start an InfoPackage To start an InfoPackage in SAP BW, run the INFOPACKAGE_START workflow. Before you can run the workflow, complete the following configuration tasks: Specify the InfoPackage technical name in INFOPACKAGE_NAME.txt. Configure the connection variable for the BAPI_IPAK_START mapping in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Configure the 3 rd Party Selection tab for the InfoPackage in SAP BW. 12 PWX-SPS

13 Specifying InfoPackage Technical Name in INFOPACKAGE_NAME.txt In INFOPACKAGE_NAME.txt, specify the technical name for the InfoPackage you want to start. You can use the sample file in the sapsolutions\bw\metadata\srcandparamfiles directory on the Informatica platform installation DVD as a template to create a copy of INFOPACKAGE_NAME.txt. Place the copy of the file in the SrcFiles directory in the Informatica Services installation. When you create an InfoPackage using the metadata creation solution, you can find the InfoPackage technical name in the following output file TgtFiles\INFOPACKAGE_NAME1.OUT in the Informatica Services installation. You can also find the InfoPackage technical name in the InfoPackage properties in SAP BW. Configuring Connection Variable for the s_bapi_ipak_start Session After you specify the InfoPackage technical name, configure the connection variable for the s_bapi_ipak_start session. Configure the connection variable in INFA_SAPBW_OBJECT_MANAGEMENT.prm. Place the copy of the parameter file in server\bin in the Informatica Services installation directory. You can place the file in another directory if you specify the file name and directory in the workflow or session properties. The following table lists the properties you configure for the BAPI_IPAK_START mapping: Mapping Parameters [s_bapi_ipak_start] $$AppConnection_BW_RF C= Required. Session task name. Do not change this entry. Required. BAPI/RFC connection name. Define an SAP BAPI/RFC connection object and enter the name here. Configuring the 3 rd Party Selection Tab for the InfoPackage in SAP BW Before you run the workflow to start an InfoPackage, you need to configure the 3 rd Party Selection tab for the InfoPackage in SAP BW to input PowerCenter workflow and session task names. For more information about configuring the 3 rd Party Selection tab in SAP BW, see Loading Data into SAP BW in the PowerExchange for SAP NetWeaver User Guide. 13 PWX-SPS