- PDF Free Download

Size: px

Start display at page:

Download ""

Corey Rodgers
5 years ago
Views:

3-07/2017 https://support.industry.siemens.

1 Converting Equipment module for SIMOTION Project Generator Manual - V / Siemens Industry Online Support

2 Warranty and liability Warranty and liability Note The Application Examples are not binding and do not claim to be complete regarding the circuits shown, equipping and any eventuality. The Application Examples do not represent customer-specific solutions. They are only intended to provide support for typical applications. You are responsible for ensuring that the described products are used correctly. These Application Examples do not relieve you of the responsibility to use safe practices in application, installation, operation and maintenance. When using these Application Examples, you recognize that we cannot be made liable for any damage/claims beyond the liability clause described. We reserve the right to make changes to these Application Examples at any time without prior notice. If there are any deviations between the recommendations provided in these Application Examples and other Siemens publications e.g. Catalogs the contents of the other documents have priority. We do not accept any liability for the information contained in this document. Any claims against us based on whatever legal reason resulting from the use of the examples, information, programs, engineering and performance data etc., described in this Application Example shall be excluded. Such an exclusion shall not apply in the case of mandatory liability, e.g. under the German Product Liability Act ( Produkthaftungsgesetz ), in case of intent, gross negligence, or injury of life, body or health, guarantee for the quality of a product, fraudulent concealment of a deficiency or breach of a condition which goes to the root of the contract ( wesentliche Vertragspflichten ). The damages for a breach of a substantial contractual obligation are, however, limited to the foreseeable damage, typical for the type of contract, except in the event of intent or gross negligence or injury to life, body or health. The above provisions do not imply a change of the burden of proof to your detriment. Any form of duplication or distribution of these Application Examples or excerpts hereof is prohibited without the expressed consent of the Siemens AG. Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, state-of-the-art industrial security concept. Siemens products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place. Additionally, Siemens guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under Entry-ID: , V1.0.3, 07/2017 2

3 Table of contents Table of contents Warranty and liability Task Installation Software requirements Integration/Update of the Equipment module Creation of a Converting project with a lower Scout Version Supported modules Functionality Operation Language General Save / load complete configuration Save / load / adopt axis configuration Next, Back, Go to Expert view Tooltip Converting diagnostic pages Summary Related literature Contact History Entry-ID: , V1.0.3, 07/2017 3

4 1 Task 1 Task The equipment module Converting can be used to generate a project combining different Converting standard applications with Easy Project project generator. Currently the following Converting modules are supported: Table 1-1 Available modules with the equipment module Converting Module Leading axis Winder Tension control axis SIMOTION Standard Application SIMOTION Axis-FB SIMOTION Winder SIMOTION Axis-FB SIMOTION Line Tension Control SIMOTION Axis-FB The project generator generates a Scout project which contains the necessary technological objects, program units and standard libraries of standard applications Print Standard. Furthermore the configuration parameter of the modules can be determined. Entry-ID: , V1.0.3, 07/2017 4

5 2 Installation 2 Installation 2.1 Software requirements To use the equipment module Converting an installation of SIMOTION Scout V4.4 is required as of technology object of version V4.4 are used. Additionally the application SIMOTION ProjectGenerator easyproject V1.4.0 or higher is needed. 2.2 Integration/Update of the Equipment module The equipment module Converting was created as an extension module for the project generator. When downloading the project generator the Converting equipment module is already part of it. However there might be a newer version of the Converting equipment module available at It can be changed in the data structure of the project generator easily. NOTICE Make sure to use the latest version of the project generator always! To implement the equipment module follow the following steps: 1. Download the latest version of the project generator and extract the archive to your computer The project generator can be downloaded here: 2. Download the latest version of the Converting equipment module and extract the archive to your computer 3. Copy the folder Converting 4. Open the Application path of your project generator 5. Change to the Path SIMOTION/EquipmentModules/Vx_x The highest version of the version folder need to be selected (e.g. V4_5)! 6. Paste the copied folder After a restart of the project generator the equipment module Converting is available. The steps to extend the project generator with user defined modules are described in the manual of project generator in chapter 1.3. Entry-ID: , V1.0.3, 07/2017 5

6 2 Installation 2.3 Creation of a Converting project with a lower Scout Version If a project with a lower SIMOTION version than the highest available version in the latest project generator shall be created (e.g. V4.4 even V4.5 is available), the following applies: 1. The latest version of the Converting equipment module need to copied to the highest available SIMOTION version folder in path SIMOTION\EquipmentModules\Vx_x 2. The file Converting.xml of the Converting module folder Converting need to be copied/replaced in the version folder of the desired project version. 3. The file language.csv of the Converting module folder Converting\Data need to be copied/replaced in the version folder of the desired project version. NOTE The data which are used to create the project (TOs, program units, libraries, etc.) are used from the path of the highest version folder. Entry-ID: , V1.0.3, 07/2017 6

Line axis Figure 3-1 Extract of the line axis configuration Winder

7 3.1 Supported modules With the Converting Module for Project Generator different application modules can be integrated. Line axis Figure 3-1 Extract of the line axis configuration Winder Figure 3-2 Extract of the winder configuration Entry-ID: , V1.0.3, 07/2017 7

8 Line Tension Control Figure 3-3 Extract of the line tension control configuration Entry-ID: , V1.0.3, 07/2017 8

9 3.2 Functionality General The equipment module Converting was created to generate a machine specific project with the concept of the Converting standard applications. With the equipment module it is possible to implement all necessary technological objects as well as the parameterization of the configuration parameter. The parameters are pre-defined with meaningful values. All necessary libraries will be added to the project. In the program part of the project a unit pmainsequence will be created which contains an example control sequence to control different Converting modules (standard applications e.g. SIMOTION Winder, SIMOTION LTC, ). For every module type a separate program unit will be created which contains module specific programs (e.g. StartUp, Background, IPO). Create a new project In case the equipment module Converting is used to create a new project the project will be generated like described above. Open and extend an existing project In case the equipment module Converting is used to open an already existing project these project will be extended by the program structure described above. If those programs already exist in the project it can be used to extend it by further technology objects or to update the containing libraries. Dissociation The configuration of SINAMICS is not part of the module. Entry-ID: , V1.0.3, 07/2017 9

3.3 Operation 3.3.1 Language The module configuration language depends on the selected SIMATIC Manager language. Available languages are German and English.

10 3.3 Operation Language The module configuration language depends on the selected SIMATIC Manager language. Available languages are German and English. If another SIMAITC Manager language is selected, the module configuration language will be English General The masks of the module Converting are separated in a working and a help area. Figure 3-4 work area help area navigation area In the working area the settings for the actual step can be done. In the help area information to the possibilities of the actual steps are shown. With the button documentation on the bottom right, the manual to the current configuration step can be opened. Example: On the first winder configuration page the manual of the SIMOTION Winder application will be opened whereas the manual of the Converting library LConLib will be opened by clicking the documentation Button on the page where the diameter calculation parts are configured. Additionally a separate Converting equipment module documentation (this manual) is available by clicking on the <?> Button on the top ride corner of every page. Entry-ID: , V1.0.3, 07/

11 3.3.3 Save / load complete configuration On the first page ( main ) of the equipment module Converting can be selected whether a new configuration shall be created or a beforehand saved configuration shall be loaded. In case a saved configuration shall be used these configuration can be adapted afterwards. On the page Summary the complete configuration can be saved in a xml file Save / load / adopt axis configuration Beside the complete configuration every single axis configuration can be saved as xml file. This can be done on last page of an axis configuration. At the beginning of every axis configuration it can be selected whether the axis shall be configured completely new of a beforehand saved axis configuration shall be loaded. If a configuration file of a complete module configuration is selected at the place of loading an axis configuration file, the specific axis from which the configuration shall be loaded needs to be selected in a drop down menu. Independent whether a configuration has been saved before, it can be selected whether the configuration shall be adopted from an already configured axis of the same type Next, Back, Go to In the lower part of the configuration screens the buttons next and back can be used to navigate through the pages. With the dropdown menu and the button Go to it can be switched directly to the first page of a section Expert view On the top right of the winder configuration pages the checkbox Expert view can be set to display configuration parameters which are note used in most (more simple) configurations. NOTE Independent whether the Expert view is set or not all configuration parameters will be integrated into the project with default values. Entry-ID: , V1.0.3, 07/

12 3.3.7 Tooltip There are two different tooltips available for every parameter, which is displayed as soon as the mouse is hold above the respective element. The tooltip above the description text of a parameter shows the variable name as it is defined in the library. The tooltip above the input field or the dropdown box shows a more detailed parameter description Converting diagnostic pages With the checkbox SIMOTION IT Diag the Converting diagnostic pages will be integrated to the project. The Converting Diagnostic pages can be used to display actual values of the application on the SIMOTION IT web server. With the second checkbox it s possible to transfer the web pages directly to the SIMOTION CF card. NOTE For the transfer via FTP an Ethernet connection to the controller is required. This can be checked with a ping (button Test ). Additionally the credentials for the FTP connection must be known and the option FTP must be activated in the loaded project. Further information regarding FTP on SIMOTION you can find in the documentation of SIMOTION IT. Is there no Ethernet connection the web pages will be stored in the project folder (<project_name>\pgen_data_files\cardfiles\user\simotion\hmi\files) and can be copied to the CF card later on. NOTE Additional information to the Converting diagnostic pages can be found here: Entry-ID: , V1.0.3, 07/

3.3.9 Summary In the mask Summary all settings of the masks before are listed. You can check the configuration and if necessary go back to the masks before to make changes.

13 3.3.9 Summary In the mask Summary all settings of the masks before are listed. You can check the configuration and if necessary go back to the masks before to make changes. Figure 3-5 By pressing the button Complete the settings will be written to the project generator data base. NOTE The duration to write the settings in the project generator data base depends on the number of technological objects configured in the project. Afterwards you can configure further SIMOTION devices or generate the project. NOTE At the end of the project generation an internal data base file as well as a log file of generation will be stored in the project folder in the following path: (<project_name>\pgen_data_files\) Entry-ID: , V1.0.3, 07/

14 4 Related literature 4 Related literature Table 4-1 Topic \1\ Siemens Industry Online Support \2\ Download page of this entry \3\ Download page of project generator \4\ Converting diagnostic pages Title / Link https://support.industry.siemens.com/cs/ww/en/view/ Contact Siemens AG DF FA PMA APC Frauenauracher Strasse Erlangen Germany mailto: tech.team.motioncontrol@siemens.com 6 History Table 6-1 Version Date Modifications V1.0 10/2015 First version V1.1 03/2016 Minor changes V /2016 Adaption of documentation version to module version V /2017 New chapter in this manual; Update of Equipmentmodul V /2017 Minor changes; Entry-ID: , V1.0.3, 07/

https://support.industry.siemens.com/cs/ww/en/view/

SIMOTION IT Application frame Manual 07/2017 https://support.industry.siemens.com/cs/ww/en/view/109748953 Siemens Industry Online Support Warranty and liability Warranty and liability Note The Application