5 LENGTH. Lead wires at one end. Lead wires at both ends. See length ordering guide. Standard is 0970(970mm) atex-jp.

Transcription

1 DESCRIPTION Tape Light Wide Outdoor (High Lumen output LED Strip Light) in IP67 rated provides powerful and flexible LED lighting stands for indirect lighting applications. Tape Light Wide Outdoor has more than 2000 lm/m and will give you more idea for Exterior Lighting. The high lumen LED Strip Lights offer a variety of color temperatures and outputs to meet your project's lighitng requirements. ORDERING PRODUCT No. LENGTH TL W 25K PRODUCT OUTPUT LED COLOR 1 PRODUCT TLW 2 OUTPUT Tape Light Wide 08 LED 8.6mm pitch 3 LED COLOR 22K 2200K 25K 2500K 28K 2800K 30K 3000K 35K 3500K 40K 4000K 50K 5000K 4 LEAD WIRES 4 LEAD WIRES W 5 LENGTH Enter 4digit code PRODUCT No. Standard "W" Type 1 LED COLOR TL08090W22K TL08090W25K TL08090W28K TL08090W30K TL08090W35K TL08090W40K TL08090W50K TL08090W22KW TL08090W25KW TL08090W28KW TL08090W30KW TL08090W35KW TL08090W40KW TL08090W50KW 2200K 2500K 2800K 3000K 3500K 4000K 5000K 5 LENGTH Lead wires at one end. Lead wires at both ends. See length ordering guide. Standard is 0970(970mm) KEY FEATURES AND BENEFITS Construction: LEDs sealed in silicone rub ber Installation: See ACCESSORIES for options on mounting channels and brackets. Environment: Exterior. IP67 rated. Water and dust resistant. Proper drainage required. Product should not reside in standing water. Not for use as a submersible light source. Operating Temperature: 10 to 50 C (14 to 122 F) Bending Radius: 60 mm vertical Power and Control: DMX512, DALI on/off, and dimming control options. See POWER AND CONTROL data sheets or contact factory for more information. PRODUCT SPECIFICATIONS LEDS 112/m LED PITCH 8.6mm 2200K 950lms/m 2500K 2300lms/m 2800K 3000K 3500K 2600lms/m 4000K 5000K INPUT 24VDC±1% WATTS 24 W/m WIDTH 1 28mm HEIGHT 1 8mm LENGTH 2 970mm WEIGHT 220g (7.8oz) per meter BEAM ANGLE 120 TRIM POINTS Every 60mm Max Unit Connectable 5.4m Specifications subject to change. Visit for the most current product data A4. Page 43

2 LENGTH ORDER CODE GUIDE (LENGTHS INCLUDE END CAPS. SEE DRAWINGS.) TL OUTPUT MODELS CODE MM CODE MM CODE MM CODE MM DIMENSIONS 150mm mm 8.6mm 8mm 31mm 28mm XX'Section 12mm In case of Lead wires at one end type 21mm Recommended total length connectable per power supply Power Supply 100W Power Supply 150W Power Supply 240W Power Supply 320W Power Supply Total length of the product 2.5m 4m 7m 9m For multiple systems configuration Page 44 Specifications subject to change. Visit for the most current product data A4.

3 ACCESSORIES SUS CHANNEL FAS00TW Rigid channel for straight line installations. W H L: mm Weight: 200g SUS MOUNTING BRACKET FAS00TW01(Qty:5pcs per pack) Please use 5pcs per meter for flexible line installations W H L: mm Weight: 8g/PC 1Select one method for installation. These accessories are not used together. See INSTALLATION. INSTALLATION Use of Bracket (1) Fix the Bracket with screws. Please fix the bracket in the necessary location with screws. Recommended pitch is 180mm or less Recommended screws :4.1 Round head screw Please increase the number of the mounting bracket if needed for installation location at the project site. The product is vertical bending type. Bending Radius is 60mm vertical. (2) Install the product into the Bracket Please install the product with the diagonal line toward groove on the bracket as the right drawing. After that, please install the products in the bracket. Please do not constrict LED of the product when installing the product in the channel. Less than 180mm screws Bracket Groove on Bracket Bracket Use of Rigid Channel (1) Cut the Channel Please cut the rigid channel as needed because it is not available to insert the end cap of the product in the rigid channel. The insertion of the end cap to the rigid channel may cause the failure and the damage. Please have the gap 1020mm between the end cap and the rigid channel. (2) Remove the burr of the channels after cutting Note that the burr may cause damages. * electrifications * smoke. (3) Mount the Channel onto the wall Please mount the rigid channel on the wall using screws into the screw hole to properly secure it. Screw : 4.1 Round head screw (4) Install the product into the Channel Please install the product with the diagonal line toward groove on the channel as the right drawing. After that, please install the products in the channel Please do not constrict LED of the product when installing the product in the channel. Endcap 10 20mm Groove on Channel Rigid Channel Rigid Channel Specifications subject to change. Visit for the most current product data A4. Page 45

4 SYSTEM DIAGRAMS The product's Max.units connectable is 5410mm. SINGLE RUN In case of less than 5410mm If you need to install less than 5410mm, it can be connected in series as below. Refer to the table for the recommended cable lengths. PINK WIRE : () mm Connection portion is treated with heatshrinkable tube, insulation tape or sleeve for insulation and water resistant. SINGLE RUN mm In case of more than 5410mm If you need to install more than 5410mm, it has to be connected in parallel as below. System 1 System 2 Cable length must be the same Reference for installation In order to reduce the variation in brightness due to the voltage drop. Please perform the following wiring. 1. Cable lengths must be the same. 2. To equalize the voltage drop by distance and intensity of current. 3. Please use power supplies as many as possible. Cable length must be the same System 1 System 2 Recommended cable length Cable Size Item VFF or VCTF VFF or VCTF VVF VVF Size 1.25sq 2.0sq 1.6mm 2.0mm Length less than 4m less than 7m less than 7m less than 11m Page 46 Specifications subject to change. Visit for the most current product data A4.

5 NOTICE OF INSTALLATION Please do not use the product in the closed space. Allow for proper air flow. The ambient temperature must remain the product specification.if the product is used the areas that become higher than the ambient temperature, it may cause damages *electrifications *smoke. Required space for installation is as below. More than 150mm Less than 200mm More than 100mm Less than 140mm DMX/DALI SYSTEM INTEGRATION Third party (supplied by others) Power Supply 24VDC DMX/DALI Show Designer (PC) DMX/DALI Show Player DMX/DALI signal via PC or Player () () Atex DMX/DALI Signal Receiver () Blue () Green () Red () 180W/720W maximum per Signal Receiver Specifications subject to change. Visit for the most current product data A4. Page 47